Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mechanical Power”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

TEAMER: Experimental performance characterization of a shrouded axial-flow turbine

Sitkana has developed a shrouded hydrokinetic turbine with a modular, low-cost design that can be scaled to meet the needs of remote communities. With technical support from the University of Washington, Sitkana sought to experimentally characterize the mechanical power and structural loads of various 1:3.3 scale rotor geometries. In all, 11 different rotor geometries were characterized with variations in height-to-diameter ratio, blade number, and blade type (foiled versus flat). All tests were conducted in Reynolds-independent flow conditions in the Alice C. Tyler Flume at the University of Washington. Results allow Sitkana to (1) refine the optimal rotor geometry, (2) validate numerical models, and (3) predict power output for a full-scale system. This project is part of the TEAMER RFTS 8 (request for technical support) program.

16 TIDAL AND WAVE POWER↗
DOE OSTI2021

Tau and Membranes: Interactions That Promote Folding and Condensation

Tau misfolding and assembly is linked to a number of neurodegenerative diseases collectively described as tauopathies, including Alzheimer’s disease (AD) and Parkinson’s disease. Anionic cellular membranes, such as the cytosolic leaflet of the plasma membrane, are sites that concentrate and neutralize tau, primarily due to electrostatic interactions with tau’s microtubule binding repeat domain (RD). In addition to electrostatic interactions with lipids, tau also has interactions with membrane proteins, which are important for tau’s cellular functions. Tau also interacts with lipid tails to facilitate direct translocation across the membrane and can form stable protein-lipid complexes involved in cell-to-cell transport. Concentrated tau monomers at the membrane surface can form reversible condensates, change secondary structures, and induce oligomers, which may eventually undergo irreversible crosslinking and fibril formation. These β-sheet rich tau structures are capable of disrupting membrane organization and are toxic in cell-based assays. Given the evidence for relevant membrane-based tau assembly, we review the emerging hypothesis that polyanionic membranes may serve as a site for phase-separated tau condensation. Membrane-mediated phase separation may have important implications for regulating tau folding/misfolding, and may be a powerful mechanism to spatially direct tau for native membrane-mediated functions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Performance and Wake Characterization of a Model Hydrokinetic Turbine: The Reference Model 1 (RM1) Dual Rotor Tidal Energy Converter

The mechanical power and wake flow field of a 1:40 scale model of the US Department of Energy’s Reference Model 1 (RM1) dual rotor tidal energy converter are characterized in an open-channel flume to evaluate power performance and wake flow recovery. The NACA-63(4)-24 hydrofoil profile in the original RM1 design is replaced with a NACA-4415 profile to minimize the Reynolds dependency of lift and drag characteristics at the test chord Reynolds number. Precise blade angular position and torque measurements were synchronized with three acoustic Doppler velocimeters (ADV) aligned with each rotor centerline and the midpoint between the rotor axes. Flow conditions for each case were controlled to maintain a hub height velocity, uhub= 1.04 ms−1, a flow Reynolds number, ReD= 4.4 × 105, and a blade chord length Reynolds number, Rec= 3.1 × 105. Performance was measured for a range of tip-speed ratios by varying rotor angular velocity. Peak power coefficients, CP= 0.48 (right rotor) and CP= 0.43 (left rotor), were observed at a tip speed ratio, λ= 5.1. Vertical velocity profiles collected in the wake of each rotor between 1 and 10 rotor diameters are used to estimate the turbulent flow recovery in the wake, as well as the interaction of the counter-rotating rotor wakes. The observed performance characteristics of the dual rotor configuration in the present study are found to be similar to those for single rotor investigations in other studies. Similarities between dual and single rotor far-wake characteristics are also observed.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

A Multiwavelength Study of the Cool Core Cluster MACS J1447.4+0827

Clusters of galaxies are outstanding laboratories for understanding the physics of supermassive black hole (SMBH) feedback. Here we present the first Chandra, Karl G. Jansky Very Large Array, and Hubble Space Telescope analysis of MACS J1447.4+0827 (z = 0.3755), one of the strongest cool core clusters known, in which extreme feedback from its central SMBH is needed to prevent the hot intracluster gas from cooling. Using this multiwavelength approach, including 70 ks of Chandra X-ray observations, we detect the presence of collimated jetted outflows that coincide with a southern and a northern X-ray cavity. The total mechanical power associated with these outflows (P {sub cav} ≈ 6 × 10{sup 44} erg s{sup −1}) is roughly consistent with the energy required to prevent catastrophic cooling of the hot intracluster gas (L {sub cool} = 1.71 ± 0.01 × 10{sup 45} erg s{sup −1} for t {sub cool} = 7.7 Gyr), implying that powerful SMBH feedback was in place several Gyr ago in MACS J1447.7+0827. In addition, we detect the presence of a radio minihalo that extends over 300 kpc in diameter (P {sub 1.4GHz} = 3.0 ± 0.3 × 10{sup 24} W Hz{sup −1}). The X-ray observations also reveal an ∼20 kpc plumelike structure that coincides with optical dusty filaments that surround the central galaxy. Overall, this study demonstrates that the various physical phenomena occurring in the most nearby clusters of galaxies are also occurring in their more distant analogs.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1972

Solar energy, its conversion and utilization

The work being carried out at the University of Florida Solar Energy and Energy Conversion Laboratory in converting solar energy, our only income, into other needed and useful forms of energy is described. A treatment such as this demonstrates, in proper perspective, how solar energy can benefit mankind with its many problems of shortages and pollution. Descriptions were given of the conversion processes, equipment, and performance. The testing of materials, solar water heating, space heating, cooking and baking, solar distillation, refrigeration and air-conditioning, work with the solar furnace, conversion to mechanical power, hot air engines, solar-heated sewage digestion, conversion to electricity, and other devices will be discussed.

Farber, E. A.↗
NASA NTRS1978

Dynamics of drive systems for wind energy conversion

Calculations are performed to determine the dynamic effects of mechanical power transmission from the nacelle of a horizontal axis wind machine to the ground or to an intermediate level. It is found that resonances are likely at 2 or 4/REV, but they occur at low power only, and seem easily correctable. Large reductions are found in the harmonic torque inputs to the generator at powers near rated.

Martinez-Sanchez, M.↗
NASA NTRS1977

The gross energy balance of solar active regions

Parker's (1974) model in which sunspots denote regions of increased heat transport from the convection zone is briefly described. The amount of excess mechanically transported power supposed to be delivered to the atmosphere is estimated for a typical active region, and the total radiative power output of the active-region atmosphere is computed. It is found that only a very small fraction (about 0.001) of the sunspot 'missing flux' can be accounted for by radiative emission from the atmosphere above a spot group in the manner suggested by Parker. The power-loss mechanism associated with mass loss to the solar wind is briefly considered and shown not to be sufficient to account for the sunspot missing flux.

Evans, K. D.↗
NASA NTRS1979

Phase 1 of the near team hybrid passenger vehicle development program. Appendix C: Preliminary design data package. Volume 2: Appendices

The design, development, efficiency, manufacturability, production costs, life cycle cost, and safety of sodium-sulfur, nickel-zinc, and lead-acid batteries for electric hybrid vehicles are discussed. Models are given for simulating the vehicle handling quality, and for finding the value of: (1) the various magnetic quantities in the different sections in which the magnetic circuit of the DC electric machine is divided; (2) flux distribution in the air gap and the magnetization curve under load conditions; and (3) the mechanical power curves versus motor speed at different values of armature current.

Piccolo, R.↗
NASA NTRS1982

TOPEX satellite option study

The basic design of the fleet satellite communication spacecraft (FLTSATCOM) can easily accommodate any of the three payload options for the ocean dynamic topography experiment (TOPEX). The principal mission requirements as well as the payload accommodations and communications systems needed for launching this payload are reviewed. The existing FLTSATCOM satellite design is identified and the approaches for the proposed propulsion system are described in addition to subsystems for mechanical; power; attitude and velocity control; and telemetry, tracking and control are described. The compatability of FLTSATCOM with the launch vehicle is examined and its capabilities vs TOPEX requirements are summarized. Undetermined changes needed to meet data storage, thermal control, and area to mass ratio requirements are discussed. Cost estimates are included for budgetary and planning purposes. The availability of the described design is assessed based on the continuing production of FLTSATCOM spacecraft during the schedule span planned for TOPEX.

Source record↗
NASA NTRS1983

A mathematical model for the doubly fed wound rotor generator

A mathematical analysis of a doubly-fed wound rotor machine used as a constant frequency generator is presented. The purpose of this analysis is to derive a consistent set of circuit equations which produce constant stator frequency and constant stator voltage. Starting with instantaneous circuit equations, the necessary rotor voltages and currents are derived. The model, thus obtained, is assumed to be valid, since the resulting relationships between mechanical power and active volt-amperes agrees with the results of others. In addition, the model allows for a new interpretation of the power flow in the doubly-fed generator.

Brady, F. J.↗
NASA NTRS1985

Synchronously Deployable Truss

Double-layered truss structure compactly packaged and sychronously deployed. Synchronously deployable truss constructed of two surface layers of struts, arranged in triangles, connected by "tripods" of equal-length core struts. Mechanism powered by passive spring and damped by hydraulic-damping cylinder. When released, spring drives slider linked to core and surface struts. Variety of truss geometries, including curved structures, comtemplated.

Bush, H. G.↗
NASA NTRS1985

Neutron-rich nuclei in cosmic rays and Wolf-Rayet stars

Wolf-Rayet stars figure prominently in astrophysical research. As a bonus, they seem to offer, in the recent past, an interesting connection between classical astronomy and high energy astrophysics due to their unusual composition and their huge mechanical power. The material flowing from WC stars (carbon-rich WR stars) contains gas which has been processed through core-helium burning, i.e., considerably enriched into 12C,16O, 22Ne, and 25,26Mg. This composition is reminiscent of the cosmic ray source anomalies. Encouraging agreement is obtained with observation in the mass range 12 A 26 assuming acceleration of wind particles at the shock that delineates the WR cavity, and adequate dilution with normal cosmic rays, but silicon poses.

Prantzos, N.↗
NASA NTRS1986

Advanced technology for the Space Station

The goals and objectives of the Space Station Advanced Development Program are discussed. Data from tests and experiments in the areas of attitude control and stabilization, communications and tracking, data management systems, man systems, mechanisms, power systems, structures, thermal systems, and EVA are examined. The approaches used to implement these programs and for data transfer are described. The plans for the development of the Space Station are presented.

Nolan, Mark B.↗
NASA NTRS1987

Report on the Stanford/Ames direct-link space suit prehensor

Researchers at the Center for Design Research at Stanford University, in collaboration with NASA Ames at Moffet Field, California, are developing hand-powered mechanical prehensors to replace gloves for EVA spacesuits. The design and functional properties of the first version Direct Link Prehensor (DLP) is discussed. It has a total of six degrees-of-freedom and is the most elaborate of three prehensors being developed for the project. The DLP has a robust design and utilizes only linkages and revolute joints for the drive system. With its anthropomorphic configuration of two fingers and a thumb, it is easy to control and is capable of all of the basic prehension patterns such as cylindrical or lateral pinch grasps. Kinematic analysis reveals that, assuming point contacts, a grasped object can be manipulated with three degrees-of-freedom. Yet, in practice more degrees-of-freedom are possible.

Jameson, J. W.↗
NASA NTRS1991

Direct-Link Prehensor

Operator-powered mechanical hand gives protection, dexterity, and proximity to work. Prehensor has ring finger, index finger, and thumb, mounted on supporting frame. Ring and index fingers consist of three jointed links each, and thumb consists of two jointed links. Thumb positioned opposite fingers in anthropomorphic arrangement. Palm assistor (disk projecting from support frame) helps mechanical fingers to hold objects. Shroud encloses operator's hand, protecting it from vacuum, high pressure, or hazardous materials. External mechanical fingers made of materials compatible with external environment.

Jameson, John W.↗
NASA NTRS1991

Rotation and emission lines in stars and accretion disks

In the accretion disks of quiescent dwarf novae, Doppler mapping studies reveal that Balmer emission lines increase sharply toward the center of the disk, with surface brightnesses scaling roughly as R exp -3/2 varies as Omega(Kep). Similarly, among chromospherically active stars the H-alpha and Ca II H and K emission cores are stronger in the more rapidly rotating stars, with surface brightnesses scaling again roughly as Omega(rot). Since in both cases the emission lines scale linearly with the rotation frequency, it is proposed that the mechanism powering the emission lines in quiescent accretion disks is the same as that in chromospherically active stars, namely, the emergence of magnetic flux generated by the action of a dynamo, and its interaction with the atmosphere. If this empirical connection between disks and stars is in fact due to magnetic dynamos, the range of rotation rates available for testing dynamo theories expands from a factor of 1000 to 10 to the 7th.

Horne, Keith↗
NASA NTRS1991

The X-ray Timing Explorer

The capabilities and projected mission objectives of the X-ray Timing Explorer (XTE) are set forth with attention given to the components of the space explorer. The XTE instrument complement is reviewed and specific data and graphic descriptions are presented regarding the large-area proportional counter array, the all-sky monitor, and the high-energy crystal scintillation experiment. The XTE provides low-background continuous 2-200 keV response with large apertures, rapid maneuverability, and detailed energy-resolved studies of phenomena close to neutron stars. The synergism of the mission capabilities is shown to permit a powerful mechanism for timing and broad-band spectral studies after deployment by the NASA Explorer Platform in approximately 1995.

Bradt, H. V.↗
NASA NTRS1992

Inheritance for software reuse: The good, the bad, and the ugly

Inheritance is a powerful mechanism supported by object-oriented programming languages to facilitate modifications and extensions of reusable software components. This paper presents a taxonomy of the various purposes for which an inheritance mechanism can be used. While some uses of inheritance significantly enhance software reuse, some others are not as useful and in fact, may even be detrimental to reuse. The paper discusses several examples, and argues for a programming language design that is selective in its support for inheritance.

Sitaraman, Murali↗