Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Measurement theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Pulse height response of an optical particle counter to monodisperse aerosols

The pulse height response of a right angle scattering optical particle counter has been investigated using monodisperse aerosols of polystyrene latex spheres, di-octyl phthalate and methylene blue. The results confirm previous measurements for the variation of mean pulse height as a function of particle diameter and show good agreement with the relative response predicted by Mie scattering theory. Measured cumulative pulse height distributions were found to fit reasonably well to a log normal distribution with a minimum geometric standard deviation of about 1.4 for particle diameters greater than about 2 micrometers. The geometric standard deviation was found to increase significantly with decreasing particle diameter.

Wilmoth, R. G.↗
NASA NTRS1999

Thermomechanical Characterization of SiC Fiber Tows and Implications for CMC

In order to better understand SiC fiber behavior within CMC microstructures, mechanical tests were performed on multifilament tows consisting of different types of as produced and pretreated fibers. Tensile strengths of tows and single fibers were measured at room temperature for nonstoichiometric Hi-Nicalon and ZMI fibers and for stoichiometric Hi-Nicalon-S, Tyranno SA. and Sylramic fibers. Based on simple bundle theory, measured strengths for as-produced and sized tows were in general agreement with the single fiber results. However, after sizing removal under inert conditions, tow strengths for the coarser grained stoichiometric fibers were typically lower than those predicted from individual fiber data. This effect is attributed to enhanced fiber-fiber mechanical interaction caused by sizing removal from the rough surfaces of these fibers. In support of this, tow strengths remained high for those fiber types with fine grains or excess surface carbon; and, when re-coated with a BN interphase coating, tow strengths for the coarser grained fibers returned to their as-produced values. When the tows were pretreated in air at intermediate temperatures, tow strengths decreased in a manner that could be correlated with the oxidation characteristics of each fiber type as measured by thermogravimetric analysis. The creep and rupture properties of Hi-Nicalon and Sylramic tows were also measured in air and argon from 1200 to 1400 C. Although displaying transient and environmental effects similar to single fibers, the tows crept faster at short times and slower at long times. This resulted in the tow rupture strengths at long time being much greater than the rupture strengths of single fibers. The CMC implications of the tow results are discussed, as well as the benefits and limitations of tow testing.

Yun, H. M.↗
NASA NTRS2015

Electromagnetic and Light Scattering by Nonspherical Particles XV: Celebrating 150 Years of Maxwell's Electromagnetics

The 15th Electromagnetic and Light Scattering Conference (ELS-XV) was held in Leipzig, Germany from 21 to 26 of June 2015. This conference built on the great success of the previous meetings held in Amsterdam (1995), Helsinki(1997) [2], New York City(1998) [3], Vigo (1999),Halifax (2000), Gainesville (2002), Bremen (2003), Salobreña (2005), St. Petersburg (2006), Bodrum (2007), Hatfield (2008), Helsinki (2010), Taormina (2011), and Lille as well as the workshops held in Bremen (1996,1998) and Moscow (1997). As usual, the main objective of this conference was to bring together scientists, engineers, and PhD students studying various aspects of electromagnetic scattering and to provide a relaxed atmosphere for in-depth discussion of theory, measurements, and applications. Furthermore, ELS-XV supported the United Nations "Year of Light" and celebrated the150th anniversary of Maxwell's electromagnetics. Maxwell's paper on "A Dynamical Theory of the Electromagnetic Field" was published in1865 and has widely been acknowledged as one of the supreme achievements in the history of science. The conference was attended by136 scientists from 22 countries. The scientific program included two plenary lectures, 16 invited reviews, 88 contributed oral talks, and 70 poster presentations. The program and the abstracts of conference presentations are available at the conference website http://www.els-xv-2015.net/home.html. Following the well-established ELS practice and with Elsevier's encouragement, we solicited full-size papers for a topical issue of the Journal of Quantitative Spectroscopy and Radiative Transfer (JQSRT). The result of this collective effort is now in the reader's hands. As always, every invited review and regular paper included in this topical issue has undergone the same rigorous peer review process as any other manuscript published in the JQSRT.

light scattering↗
NASA NTRS1994

An investigation of acoustic noise requirements for the Space Station centrifuge facility

Acoustic noise emissions from the Space Station Freedom (SSF) centrifuge facility hardware represent a potential technical and programmatic risk to the project. The SSF program requires that no payload exceed a Noise Criterion 40 (NC-40) noise contour in any octave band between 63 Hz and 8 kHz as measured 2 feet from the equipment item. Past experience with life science experiment hardware indicates that this requirement will be difficult to meet. The crew has found noise levels on Spacelab flights to be unacceptably high. Many past Ames Spacelab life science payloads have required waivers because of excessive noise. The objectives of this study were (1) to develop an understanding of acoustic measurement theory, instruments, and technique, and (2) to characterize the noise emission of analogous Facility components and previously flown flight hardware. Test results from existing hardware were reviewed and analyzed. Measurements of the spectral and intensity characteristics of fans and other rotating machinery were performed. The literature was reviewed and contacts were made with NASA and industry organizations concerned with or performing research on noise control.

Castellano, Timothy↗
DOE OSTI2020

A Future Standard for Reactive Power Measurement

Reactive power is defined for sinusoidal voltage and current. Several different ways to measure the quantity have been developed, and while they all give the same result for sinusoidal voltages and currents, the results are not the same when the inputs are distorted. Work was done with distorted test signals to explore these—sometimes large— differences, and a report summarizing the findings was published by the US National Institute of Standards and Technology (NIST) in 2011. We show in this paper that the differences are smaller, but not negligible, when the waveforms are less distorted. The differences between the results of the various existing methods are discussed from the viewpoint of measurement theory. The paper argues that it is time to select one method. The relevance to the ongoing revision to IEEE standard 1459 (which defines reactive power for the purposes of measurement) is explored.

reactive power, measurement standard, definitions,↗
NASA NTRS2014

In Situ Probe Science at Saturn

A fundamental goal of solar system exploration is to understand the origin of the solar sys-tem, the initial stages, conditions, and processes by which the solar system formed, how the formation pro-cess was initiated, and the nature of the interstellar seed material from which the solar system was born. Key to understanding solar system formation and subsequent dynamical and chemical evolution is the origin and evolution of the giant planets and their atmospheres. Several theories have been put forward to explain the process of solar system formation, and the origin and evolution of the giant planets and their atmospheres. Each theory offers quantifiable predictions of the abundances of noble gases He, Ne, Ar, Kr, and Xe, and abundances of key isotopic ratios 4He3He, DH, 15N14N, 18O16O, and 13C12C. Detection of certain dis-equilibrium species, diagnostic of deeper internal pro-cesses and dynamics of the atmosphere, would also help discriminate between competing theories. Measurements of the critical abundance profiles of these key constituents into the deeper well-mixed at-mosphere must be complemented by measurements of the profiles of atmospheric structure and dynamics at high vertical resolution and also require in situ explora-tion. The atmospheres of the giant planets can also serve as laboratories to better understand the atmospheric chem-istries, dynamics, processes, and climates on all planets including Earth, and offer a context and provide a ground truth for exoplanets and exoplanetary systems. Additionally, Giant planets have long been thought to play a critical role in the development of potentially habitable planetary systems. In the context of giant planet science provided by the Galileo, Juno, and Cassini missions to Jupiter and Sat-urn, a small, relatively shallow Saturn probe capable of measuring abundances and isotopic ratios of key at-mospheric constituents, and atmospheric structure in-cluding pressures, temperatures, dynamics, and cloud locations and properties not accessible by remote sens-ing can serve to test competing theories of solar system and giant planet origin, chemical, and dynamical evolution.

Interstellar↗
NASA NTRS1983

A far-infrared study of N/O abundance ratio in galactic H 2 regions

Far-infrared lines of N++ and O++ in several galactic H II regions were measured in an effort to probe the abundance ratio N/O. New measurements are presented for W32 (630.8-0.0), Orion A, and G75.84+0.4. The combination of (N III) 57.3 millimicrons and (O III) 88.4 and 51.8 millimicrons yields measurements of N++/O++ that are largely insensitive to electron temperature, density uncertainties, and to clumping of the ionized gas, due to the similarity of the critical densities for these transitions. In the observed nebulae, N++/O++ should be indicative of N/O, a ratio that is of special importance in nucleosynthesis theory. Measurements are compared with previous measurements of M17 and W51. For nebulae in the solar circle, N++/O++ is greater than the N/O values derived from optical studies of N+/O+ in low ionization zones of the same nebulae. We find that N++/O++ in W43 is significantly higher than for the other H II regions in the sample. Since W43 is located at R = 5 kpc, which is the smallest galactocentric distance in our sample, our data appear consistent with the presence of a negative abundance gradient d(N/O)dR.

Lester, D. F.↗
NASA NTRS1973

Satellite ocean color measurements

The application of pattern recognition to ocean color data analysis is considered. Due to weight, cost, and data transmission rate limitations, any mapping type remote sensor of ocean color must necessarily collect light from the sea in a finite number of channels. The optical properties of the sea are discussed together with the remote sensing of ocean color, an optical model of natural water, the microscopic optical model, the macroscopic optical model, multiple scattering theory, measurements of subsurface oceanographic parameters, measurements of bulk absorption and scattering properties, measurements of the up- and down-welling light field, and the techniques for ocean color data analysis.

Mccluney, W. R.↗
DOE OSTI2024

Anomaly inflow, dualities, and quantum simulation of Abelian lattice gauge theories induced by measurements

Previous work [] has demonstrated that quantum simulation of Abelian lattice gauge theories (Wegner models including the toric code in a limit) in general dimensions can be achieved by local adaptive measurements on symmetry-protected topological (SPT) states with higher-form generalized global symmetries. The entanglement structure of the resource SPT state reflects the geometric structure of the gauge theory. In this work we explicitly demonstrate the anomaly inflow mechanism between the deconfining phase of the simulated gauge theory on the boundary and the SPT state in the bulk by showing that the anomalous gauge variation of the boundary state obtained by bulk measurement matches that of the bulk theory. Moreover, we construct the resource state and the measurement pattern for the measurement-based quantum simulation of a lattice gauge theory with a matter field (Fradkin-Shenker model), where a simple scheme to protect gauge invariance of the simulated state against errors is proposed. We further consider taking an overlap between the wave function of the resource state for lattice gauge theories and that of a parameterized product state, and we derive precise dualities between partition functions with insertion of defects corresponding to gauging higher-form global symmetries, as well as measurement-induced phases where states induced by a partial overlap possess different (symmetry-protected) topological orders. Measurement-assisted operators to dualize quantum Hamiltonians of lattice gauge theories and their noninvertibility are also presented. Published by the American Physical Society 2024

Okuda, Takuya↗
DOE OSTI2023

Sensitivity measurements for a 250 MHz quartz shear-horizontal surface acoustic wave biosensor under liquid viscous loading

Surface acoustic wave (SAW) devices have been used in biochemical assays due to their high sensitivity. The device sensitivity is a function of changes in the density and viscosity of the liquid. Here, we studied the effect of fluid viscosity using a 250 MHz quartz shear-horizontal (SH)-SAW biosensor by monitoring different concentrations of binary aqueous/glycerol solutions. In this study, the sensitivity of the biosensor was determined by fitting the data to models derived from perturbation theory. Measurements in water were used as the reference. For a 0% to 50% glycerol solution, an 87°–204° separation in the phase shift was observed. The slope of the plot of the phase shift vs (ηρ)0.5 was used to indicate the sensor’s sensitivity. The sensitivity for our 250 MHz quartz SH-SAW sensors was calculated to be 3.7×10−3m2sKg. The corresponding mass sensitivity was determined to be 9.25 × 105m2Kg. The limit of detection was calculated to be 36 picograms (pg), while the limit of quantification or LOQ was calculated to be 109 pg. Traditionally, liquid phase measurements have been challenging for SAW devices because liquids dampen the vibrating sensors severely. This problem has been largely solved using a transverse (shear) wave instead of the more popular longitudinal or Rayleigh waves. Liquid measurements are now possible using transverse waves, also known as shear waves, because transverse waves are only minimally attenuated by liquids. Shear-horizontal SAW sensors (SH-SAW) show great promise as label-free biosensors because of their ability to handle liquid samples. However, the viscosity of the liquid still induces loading effects and can be measured when the liquid is loaded onto the SH-SAW propagating surface (delay line). When the liquid above the delay line is perturbed by physical or chemical changes, such as binding to a receptor, it alters the propagating acoustic wave. The SH-SAW device can measure these changes in liquid properties as a change in the wave’s phase compared to the original wave. The device’s phase shift was recorded as a function of the changes in the density and viscosity of the binary glycerol solution and used to determine the sensitivity in the linear dynamic range of responses.

Materials Science↗
NASA NTRS2013

Improved Data Reduction Algorithm for the Needle Probe Method Applied to In-Situ Thermal Conductivity Measurements of Lunar and Planetary Regoliths

The needle probe method (also known as the' hot wire' or 'line heat source' method) is widely used for in-situ thermal conductivity measurements on soils and marine sediments on the earth. Variants of this method have also been used (or planned) for measuring regolith on the surfaces of extra-terrestrial bodies (e.g., the Moon, Mars, and comets). In the near-vacuum condition on the lunar and planetary surfaces, the measurement method used on the earth cannot be simply duplicated, because thermal conductivity of the regolith can be approximately 2 orders of magnitude lower. In addition, the planetary probes have much greater diameters, due to engineering requirements associated with the robotic deployment on extra-terrestrial bodies. All of these factors contribute to the planetary probes requiring much longer time of measurement, several tens of (if not over a hundred) hours, while a conventional terrestrial needle probe needs only 1 to 2 minutes. The long measurement time complicates the surface operation logistics of the lander. It also negatively affects accuracy of the thermal conductivity measurement, because the cumulative heat loss along the probe is no longer negligible. The present study improves the data reduction algorithm of the needle probe method by shortening the measurement time on planetary surfaces by an order of magnitude. The main difference between the new scheme and the conventional one is that the former uses the exact mathematical solution to the thermal model on which the needle probe measurement theory is based, while the latter uses an approximate solution that is valid only for large times. The present study demonstrates the benefit of the new data reduction technique by applying it to data from a series of needle probe experiments carried out in a vacuum chamber on JSC-1A lunar regolith stimulant. The use of the exact solution has some disadvantage, however, in requiring three additional parameters, but two of them (the diameter and the volumetric heat capacity of the probe) can be measured and the other (the volumetric heat capacity of the regolith/stimulant) may be estimated from the surface geologic observation and temperature measurements. Therefore, overall, the new data reduction scheme would make in-situ thermal conductivity measurement more practical on planetary missions.

JSC-1A↗
DOE OSTI2020

An Atmospheric Aerosol Short Course for Early Career Scientists

The first Department of Energy (DOE) Environmental and Molecular Science Laboratory (EMSL)/Atmospheric Radiation Measurement (ARM) aerosol summer school was held July 15-19, 2019 at the EMSL user facility located at Pacific Northwest National Laboratory. The school set out to provide graduate students and early-career scientists an overview of atmospheric aerosol science and an introduction to the measurement techniques available through the EMSL and ARM user facilities to address current aerosol science issues. Instructors for the course were drawn from scientists from the EMSL (Laskin et al., 2016; China et al., 2018) and ARM facilities (McComiskey and Ferrare, 2016) as well as from the DOE Atmospheric System Research (ASR) program. Student support for the summer school was also jointly provided by EMSL, ARM, and ASR. The school spanned five days with each day covering a particular theme. 25 students from 21 institutions attended morning lectures on aerosol composition, properties, theory, measurements, and modeling. During afternoons, the students explored instruments that collect and analyze aerosol samples at EMSL and PNNL’s Atmospheric Measurements Laboratory. They also tested relevant computer modeling simulations and learned about NWChem, EMSL’s open-source computational chemistry software suite.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1988

The Mark III stellar interferometer

The Mark III interferometer is an operational long baseline stellar interferometer on Mt. Wilson with four-possible baseline configurations from 9m NE-SW to 20m N-S. The interferometer was designed to be a highly automated astronomical instrument to measure stellar positions and diameters to a magnitude limit of seven. Initial fringe observations were made in September 1986 with a 12-m N-S baseline. In the following months, semi-automated astrometric and stellar diameter measurements were also made. This paper describes the hardware and software components of the instrument and its operational characteristics. The interferometer has several novel features. One is the use of optimal estimation and control algorithms (e.g. Kalman filters) in the control loops. Another is the ability to operate both as a closed-loop phased interferometer and eventually as an open-loop or absolute coherent interferometer. High thermal stability and mechanical accuracy should permit the instrument to point blind at an astronomical object and maintain optical path equality to within the limits set by the atmosphere. In this absolute interferometric mode of operation, it should be possible to observe faint astronomical objects that are too dim for phase tracking. In theory, measurements of amplitude, group delay, and closure phase will be possible to 14 mag.

Shao, M.↗
DOE OSTI2020

Solving Stochastic Inverse Problems for Property–Structure Linkages Using Data-Consistent Inversion and Machine Learning

Determining process–structure–property linkages is one of the key objectives in material science, and uncertainty quantification plays a critical role in understanding both process–structure and structure–property linkages. In this work, we seek to learn a distribution of microstructure parameters that are consistent in the sense that the forward propagation of this distribution through a crystal plasticity finite element model matches a target distribution on materials properties. This stochastic inversion formulation infers a distribution of acceptable/consistent microstructures, as opposed to a deterministic solution, which expands the range of feasible designs in a probabilistic manner. Furthermore, to solve this stochastic inverse problem, we employ a recently developed uncertainty quantification framework based on push-forward probability measures, which combines techniques from measure theory and Bayes’ rule to define a unique and numerically stable solution. This approach requires making an initial prediction using an initial guess for the distribution on model inputs and solving a stochastic forward problem. To reduce the computational burden in solving both stochastic forward and stochastic inverse problems, we combine this approach with a machine learning Bayesian regression model based on Gaussian processes and demonstrate the proposed methodology on two representative case studies in structure–property linkages.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Exploring Hydrologic Model Process Connectivity at the Continental Scale Through an Information Theory Approach

Exploring water fluxes between hydrological model (HM) components is essential to assess and improve model realism. Many classical metrics for HM diagnosis rely solely on streamflow and hence provide limited insights into model performance across processes. This study applies an information theory measure known as “transfer entropy” (TE) to systematically quantify the transfer of information among major HM components. To test and demonstrate the benefits of TE, we use the Framework for Understanding Structural Errors (FUSE) model to mimic and compare four commonly used HM structures, VIC, PRMS, SACRAMENTO, and TOPMODEL, across 671 catchments spanning a variety of hydrologic regimes in the conterminous United States. We explore connections between HM components and catchment landscape characteristics (e.g., climate, topography, soil, and vegetation) and characterize their nonlinear associations using distance correlation and Spearman correlation coefficients. Our results indicate that while the information transferred from precipitation to runoff is similar across model structures (likely as a result of calibration), the information transferred among other components can vary significantly from a FUSE structure to another. We find that aridity, precipitation duration and frequency, snow fraction, mean elevation, forest area, and leaf area index are often significantly associated with TE between the main HM components. Here, we propose that the presence of meaningful nonlinear associations can be used to diagnose process representation in HMs. Our results highlight the necessity to enhance the conventional streamflow-only calibration approach for a more realistic representation of water dynamics in the models.

large-sample hydrology↗
DOE OSTI2021

A digital holography ex situ measurement characterization of plasma-exposed surface erosion from an electrothermal arc source

Digital holography has been proposed to fulfill a need for an imaging diagnostic capable of in situ monitoring of surface erosion caused by plasma–material interaction in nuclear fusion devices. A digital holography diagnostic for 3D surface erosion measurement has been developed at Oak Ridge National Laboratory with the goal of deployment on a plasma device. A proof-of-concept in situ demonstration is planned which would involve measurement of plasma erosion on targets exposed to an electrothermal arc source. This work presents the results of an ex situ characterization of the capability and limitations of holographic imaging of targets exposed to the arc source. Targets were designed to provide a fiducial for comparison of deformed and unaffected areas. The results indicated that the average net erosion was ~150 nm/plasma exposure, which is expected to be within the diagnostic’s measurement capacity. Surface roughness averages determined by holographic image analysis showed good agreement with measurements taken with a profilometer. Finally, the limit of the holography diagnostic’s x–y spatial resolution was characterized by comparison with scanning electron microscope imaging.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

A solvable model of a nonlinear extension of quantum mechanics

We introduce a particular nonlinear generalization of quantum mechanics which has the property that it is exactly solvable in terms of the eigenvalues and eigenfunctions of the Hamiltonian of the usual linear quantum mechanics problem. Here, we hope that this simple example will elucidate some of the issues of interpreting nonlinear generalization of quantum mechanics that have been put forth to resolve questions about quantum measurement theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗