Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MEDIUM PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Study of dielectric breakdown in liquid xenon with XeBrA: The xenon breakdown apparatus

Maintaining the electric fields necessary for the current generation of noble liquid time projection chambers (TPCs), with drift lengths exceeding 1 m, requires a large negative voltage applied to their cathode. Delivering such high voltage is associated with an elevated risk of electrostatic discharge and electroluminescence, which would be detrimental to the performance of the experiment. The Xenon Breakdown Apparatus (XeBrA) is a 5-l, high voltage test chamber built to investigate the contributing factors to electrical breakdown in noble liquids. Here, in this work, we present the main findings after conducting scans over stressed electrode areas, surface finish, pressure, and high voltage ramp speed in the medium of liquid xenon. Area scaling and surface finish were observed to be the dominant factors affecting breakdown, whereas no significant changes were observed with varying pressure or ramp speed. A general rise in both the anode current and photon rate was observed in the last 30 s, leading up to a breakdown, with a marked increase in the last couple of seconds. In addition, the position of breakdowns was reconstructed with a system of high-speed cameras and a moderate correlation with the Fowler–Nordheim field emission model was found. Tentative evidence for bubble nucleation being the originating mechanism of breakdown in the liquid was also observed. We deem the results presented in this work to be of particular interest for the design of future, large TPCs, and practical recommendations are provided.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Effects of rejuvenation modes on the microstructures and mechanical properties of metallic glasses

This study systematically investigates the effects of three rejuvenation modes, namely biaxial loading, thermal pressure loading, and cryogenic thermal cycling, on the microstructures and mechanical properties of Cu 64 Zr 36 metallic glasses (MGs) using molecular dynamics (MD) simulations. The simulation results demonstrate that biaxial tension application during loading results in a rejuvenated glassy state with high strength. Specifically, we find that the yield stress, Young's modulus, and shear modulus of the rejuvenated glass obtained by biaxial tensile loading decreased by 2.8%, 2.1%, and 2.7%, respectively, compared to an as-cast MG reference. We also find that MGs achieve the greatest degree of rejuvenation, at the expense of strength, with the use of thermal pressure loading. Interestingly, the application of cryogenic thermal cycling results in a rejuvenated state with a lower strength drop compared to thermal pressure loading. Furthermore, analysis of the potential energy and medium-range-order (MRO) size indicates that the microstructures of MGs achieves a high-energy ordered glass state after thermal pressure loading, but a high-energy disordered glass state after biaxial tensile loading and cryogenic thermal cycling. Furthermore, these findings provide meaningful insights into the effect of rejuvenation modes on the microstructures and mechanical properties of MGs, as well as useful guidelines for designing MGs with high strength and superior plasticity for prospective applications in industry.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Review of the potential and challenges of MOF-based adsorption heat pumps for sustainable cooling and heating in the buildings

Heat pumps are regarded as the most suitable means to meet the future demand of heating and cooling in the building, as they require small input of electrical energy and output high thermal energy. Vapor compression heat pump (VCHP) and transcritical-CO 2 heat pump are the two major heat pump technologies currently dominating the market. However, VCHP system suffers from its fugitive emission of hydrofluorocarbon (HFC) refrigerants, and transcritical-CO 2 system requires high operating pressure (typically 9–13 MPa). For low-to-medium temperature heating and cooling applications thermally driven adsorption heat pump (AHP) provides a better alternative to VCHP and transcritical-CO 2 system as AHP uses natural refrigerants and operates at a much lower pressure. But currently available AHP technology has the limitation of low coefficient of performance (COP). Advances in synthesizing metal-organic frameworks (MOF) with high gas adsorption capacity have created an opportunity to address the problem of low COP of current AHP technology. Here, this article reviews the progress made in the past decade in utilizing MOF and conventional adsorbents with different working fluids in AHP technology and compares their performance. The article also summarizes the key challenges for the MOF-based AHP technology and provides the authors’ perspective to address these challenges.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

3D probabilistic fracture mechanics / computational fluid dynamics simulation of a reactor pressure vessel under transient conditions

Reactor pressure vessels (RPVs) are safety-critical light-water-reactor components that, under irradiation, experience long-term material degradation in the form of embrittlement. This can increase their susceptibility to fracture under thermal-shock conditions, which could occur during off-normal transients such as loss-of-coolant accidents (LOCAs). During a LOCA, the most severe conditions for the RPV occur when emergency core cooling water is injected through the cold legs into the water-and-steam-filled RPV. The rapid cooling of the downcomer and internal RPV surface causes decreased temperature and elevated thermally driven tensile stresses in the RPV wall. This, combined with long-term material embrittlement, may cause fracture initiation at pre-existing flaws, challenging the integrity of the RPV. Assessing RPV integrity during transients with a large spatial variation in the coolant temperature requires a modeling approach that considers the effects of spatially varying coolant temperature on the fracture probability of a population of flaws distributed throughout the RPV, accounting for spatially varying embrittlement. Here, the present study addresses this need by demonstrating first-of-its-kind coupling of a high-fidelity 3D computational fluid dynamics code with 3D probabilistic fracture mechanics This was accomplished using representative models of a pressurized-water reactor subjected to small- and medium-break LOCA conditions, both of which can result in large spatial temperature variations. While the observed impact of accounting for 3D effects was minimal under the small-break LOCA this study indicates a significant increase in the probability of fracture initiation under the medium-break LOCA when 3D effects are considered, relative to a spatially uniform cooling scenario.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Non-equilibrium simulations of hydraulic permeation: Role of mechanical boundary conditions in dense membranes

Understanding the mechanisms of water transport in reverse osmosis membranes is critical for improving membrane performance and guiding material design. While classical models describe transport as either solution-diffusion (SD)—involving concentration-driven diffusion through a homogeneous medium—or pore-flow (PF)—involving pressure-driven convection through percolated water channels—their applicability to crosslinked polyamide membranes remains debated. Here, using non-equilibrium molecular dynamics simulations, we investigate the impact of mechanical support conditions on pressure-driven water transport in polyamide membranes across varying crosslink densities and pressure differentials (1000–5000 bar). Two support conditions are considered: graphene-restrained, representing experimentally relevant supported membranes, and freeze-restrained, mimicking a self-supported structure. In graphene-restrained systems, water concentration gradients and constant pressure profiles emerge, consistent with SD theory and incompatible with PF assumptions due to the absence of percolated pores and sub-nanometer voids. In contrast, freeze-restrained systems display uniform water concentration and linearly decreasing pressure at 1000 bar, and exhibit compressibility-induced water gradients and partial percolation at 5000 bar, resembling PF-like behavior. However, the underlying assumptions of PF theory—continuous solvent pathways and pressure transmission through water-filled pores—are not met under most conditions. Our results demonstrate that accurate modeling of reverse osmosis membranes must incorporate realistic mechanical boundary conditions to distinguish between transport mechanisms. For dense polyamide membranes supported by porous substrates, graphene-restrained simulations best reflect experimental setups and support the SD model as the dominant mechanism of water permeation.

molecular dynamics↗
DOE OSTI2020

Spent Nuclear Fuel Storage and Radioactive Waste Disposal in the United States: A Law and Policy Analysis - 20302

While Congress plays political football, spent nuclear fuel continues to sit in de facto interim nuclear waste storage sites throughout the country. This ad hoc approach - if it can even be called an approach - to nuclear waste management is in no one's best interests, because of financial, safety, environmental, and national security concerns with the status quo. Senate leadership had asserted that an up-or-down vote on the Yucca Mountain Project would take place in September or October 2019, but that did not occur. Rather, a conference bill was agreed to, and it provided that, although the nuclear program should receive some funding, funding was not made available for centralized interim storage ('CIS') or the Yucca Mountain Project. The President's FY2021 Budget Request does not contain any proposed funding for the Yucca Mountain Project ('the Project'). This paper will discuss the implications of that process, both for the Project itself and for the U.S. nuclear waste program more generally. In order to provide context for the current situation, this paper will begin by chronicling the history of U.S. nuclear waste management, from the passage of the Nuclear Waste Policy Act of 1982 and to the present day. It will discuss the roles of the U.S. Department of Energy, the Nuclear Regulatory Commission, federal and state political delegations, and the nuclear energy industry. The paper will then identify key themes that can be expected to affect the future of nuclear waste management in the United States. For example, it will consider whether development of additional CIS facilities is a viable short- to medium-term solution. CIS facilities may relieve immediate pressure at decommissioned or soon-to-be-decommissioned nuclear power plants; but with that pressure partially alleviated, support for building a long-term repository may be reduced. It will also discuss opposition by the State of New Mexico and others to the proposed New Mexico CIS project, based not only on siting concerns but also whether it might become a de facto repository, and whether the State of Texas and others may also be opposed, for similar reasons, to the proposed CIS facility in Texas. Additionally, the paper will examine consent-based siting and its implications for Nevada and other states that are potential hosts for spent nuclear fuel storage and disposal facilities. Further, if the Project is not a politically viable solution, the paper will examine whether it is now time for serious consideration of an alternate location for a permanent repository, as well as consideration of other options entirely, such as deep geologic disposal. The paper will conclude by looking ahead to the 2020 elections. It will describe the positions of candidates (particularly Presidential candidates) on spent nuclear fuel storage and disposal options, without advocating for any particular candidate or political party. Perhaps in 2020, we will at least see a start to a solution to the seemingly intractable problem of nuclear waste management in the United States. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Improved pore network models to simulate single-phase flow in porous media by coupling with lattice Boltzmann method

In this paper, different pore network models to simulate single-phase flow in porous media are built and their accuracy is evaluated. In addition to the conventional pore network model (CPNM) which consists of regular pore bodies and throat bonds, three improved pore network models (IPNMs) are developed allowing to better describing the real pore and throat geometry. The first improved pore network model (IPNM1) replaces the regular throat bond with a throat bond showing the real throat cross section. The second improvement (IPNM2) uses a series of sub-throat bonds with varying cross sections to better describe the real throat geometry, which is firstly proposed in this paper. The third model (IPNM3) extracts the real pore-throat-pore geometry without simplification. The conductance of fluid flow through these more realistic throat bonds is calculated by the lattice Boltzmann method (LBM). The accuracy and computational efficiency of the different pore network models are evaluated taking the LBM simulation over the whole porous medium as reference solution. The global permeability and detailed pressure distributions in the pores for the different pore network models are validated. The results show that the accuracy of the pore network model increases from CPNM to IPNM3, but at the expense of increasing computational cost. This study suggests that IPNM3 can replace a whole-domain LBM simulation with similar accuracy but much lower computational cost. As a first-order approximation the newly proposed IPNM2 is suggested as good compromise between accuracy and computational cost.

42 ENGINEERING↗
DOE OSTI2023

Compositional effects on the chemical durabilities of aluminophosphate glasses: A review

Phosphate glasses have a range of applications including as hosts for immobilizing radioactive wastes. Studies have shown that addition of iron and/or aluminum oxides can drastically improve the chemical durability of phosphate glasses where the accurate measurement of chemical durability is one of the most important factors for determining the long-term viability of a given waste form. However, due to inconsistencies with the experimental methods used to generate chemical durability data, comparing and interpreting such data is a tedious task. These variables include the temperature of the test, the specimen form (e.g., coupon, particles), the pressure of the test (e.g., atmospheric pressure, elevated pressure in an autoclave), the exposure time, the exposure medium, and how the loss is documented (e.g., total mass lost, normalized elemental release). This review paper summarizes a large collection of chemical durability tests on aluminophosphate glasses in various studies. In addition, the effects of different oxides on the properties of phosphate glasses are summarized.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2024

A Comparative Experimental Analysis of Natural Gas Dual Fuel Combustion Ignited by Diesel and Poly OxyMethylene Dimethyl Ether

Dual-fuel low-temperature combustion is a possible solution for alleviating the tradeoff between oxides of nitrogen and soot emissions in conventional diesel combustion, albeit with poor combustion stability, high carbon monoxide, and unburned hydrocarbon emissions at low engine loads. The present work compares emissions and combustion (heat release and other metrics) of both diesel and poly-oxy methylene dimethyl ether as high-reactivity fuels to ignite natural gas while leveraging spray-targeted reactivity stratification, which involved multiple injections of the high-reactivity fuels. The experiments included six parametric sweeps of: (1) start of first injection, (2) start of second injection, (3) percentage of energy substitution of natural gas, (4) commanded injection duration ratio, (5) rail pressure, and (6) intake pressure. The experiments were performed on a 1.8 L heavy-duty single-cylinder research engine operating at a medium speed of 1339 rev/min. Not-to-exceed limits for the indicated oxides of nitrogen emissions, maximum pressure rise rate, and the coefficient of variation of the indicated mean effective pressure were set to 1 g/kWh, 10 bar/CAD, and 10%, respectively. The indicated emissions decreased and combustion improved significantly for both fueling combinations when the experimental procedure was applied.

Partridge, Kendyl Ryan↗
DOE OSTI2024

Design of a Three-Layer Impactor for Material Strength Measurements at Multi-Megabar Pressures

Off-Hugoniot loading methods for dynamic compression have been a topic of interest for many years as a means of accessing high pressures without melting a material. Simulations and an initial test experiment of a three-layer gas-gun impactor suitable for use in measuring dynamic material strength at multi-megabar pressures are described. As shown through ARES hydrocode simulations, an impactor consisting of a low-, medium-, and high-impedance material, such as TPX, Al, and Ta or Pt, can produce a quasi-isentropic loading path up to 4.6 Mbar pressure with a low homologous temperature (T/T melt = 0.1–0.25). These impactors can also be tailored to create a pressure drive suitable for a Lagrangian sound speed experiment. Simulated in-situ velocities were analyzed to determine the change in calculated strength due to non-uniformity in the impactor, which provides a measure of error sensitivity. An initial test of a three-layer projectile onto a flat target at 4.4 km/s impact velocity is reported. Finally, while the impactor incurred some delamination during firing, the measured sample/window interface velocity generally agrees with the simulated peak velocity and subsequent release, indicating the feasibility of this approach for measuring material strength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Interplay between the non-resonant streaming instability and self-generated pressure anisotropies

The non-thermal particles escaping from collision-less shocks into the surrounding medium can trigger a non-resonant streaming instability that converts parts of their drift kinetic energy into large amplitude magnetic field perturbations, and promote the confinement and acceleration of high energy cosmic rays. We present simulations of the instability using an hybrid-Particle-in-Cell approach including Monte Carlo collisions, and demonstrate that the development of the non-resonant mode is associated with important ion pressure anisotropies in the background plasma. Depending on the initial conditions, the anisotropies may act on the instability by lowering its growth and trigger secondary micro-instabilities. Introducing collisions with neutrals yield a strong reduction of the magnetic field amplification as predicted by linear fluid theory. In contrast, Coulomb collisions in fully ionized plasmas are found to mitigate the self-generated pressure anisotropies and promote the growth of the magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Development and Field Testing Novel Natural Gas Surface Process Equipment for Replacement of Water as Primary Hydraulic Fracturing Fluid (Final Report)

Southwest Research Institute® (SwRI ® ), Schlumberger Technology Corporation (SLB), and Chevron Corporation ® (Chevron) developed a novel, optimized, and lightweight process for natural gas (NG) to replace water as a low-cost fracturing medium with a low environmental impact. Hydraulic fracturing is used to increase oil and NG production by injecting high-pressure fluid, primarily water, into a rock formation, which fractures the rock and releases trapped oil and NG. This method was developed to increase yield and make feasible production areas that would not otherwise be viable for large-scale oil and NG extraction using traditional drilling technologies. Since the fracturing fluid is composed of approximately 90% water, one of the principal drawbacks to hydraulic fracturing is its excessive water use and associated large environmental footprint. According to recent data collected at fracture sites within the United States, fracturing applications in North America can consume as much as 9 million gallons of water per well. During the fracturing process, some of the fracturing fluid is permanently lost and the portion that is recovered is contaminated by both fracturing chemicals and dissolved solids from the formation. The recovered water or flow-back represents a significant environmental challenge, as it must be treated before it can be reintroduced into the natural water system. Although there is some recycling for future fracturing, the majority of the flow-back water is hauled from the well site to a treatment facility or to an injection well for permanent underground disposal. To mitigate these issues, an optimized, lightweight and modular surface process using NG to replace a majority of the water was developed as a cost-effective and environmentally clean fracturing fluid. Using NG will result in significantly less consumption since the gas that is injected as a fracturing fluid will be mixed with the formation gas and extracted as if it were from the formation itself. This process will minimize the collection, waste, and treatment of large amounts of water and will reduce the environmental impact of transporting and storing the fracturing fluid. There are two major steps involved in utilizing NG as the primary fracturing medium: (1) increasing the supply pressure of NG to wellhead pressures suitable for fracturing and (2) mixing the required chemicals and proppant needed for the fracturing process at these elevated pressures. The second step (NG-proppant mixing at elevated pressures) still requires demonstration; but very similar processes have been demonstrated in the field with other gases such as nitrogen (N 2 ) and carbon dioxide (CO 2 ). However, the first step (a compact, on-site unit for generating high-pressure NG at costs feasible for fracturing) has not been developed and is currently not commercially available. Due to the inherent compressibility of NG, more energy is required to compress the gas than what is required to pump water (or other incompressible liquids) to the very high pressure required for downhole injection. This project aimed to develop a novel, hybrid method to overcome this challenge. The project accomplishments and findings are discussed in this report. Ultimately, the research and development efforts described herein demonstrate that fracturing with NG foam is a feasible alternative to using water.

02 PETROLEUM↗
DOE OSTI2024

Do not forget the electrons: Extending moderately-sized nuclear networks for multidimensional hydrodynamic codes

Context.Nuclear networks are widely used coupled with hydrodynamical simulations of explosive scenarios to account for the change of nuclear species and energy generation rate due to nuclear reactions. In this way, there is a feedback mechanism between the hydrodynamical state and the nuclear processes. Unfortunately, the timescale of nuclear reactions is orders of magnitude smaller than the dynamical timescale that drives hydrodynamical simulations. Therefore, these nuclear networks are usually very small, reduced in most cases to a dozen elements, especially when simulations are carried out in more than one dimension. Aims.We present here an extended nuclear network, with 90 species, designed for being coupled with hydrodynamic simulations, which includes neutrons, protons, electrons, positrons, and the corresponding neutrino and anti-neutrino emission. This network is also coupled with temperature, making it extremely robust and, together with its size, unique of its kind. The inclusion of electron captures on free protons makes the network very appropriate for multidimensional studies of Type Ia supernova explosions, especially when the exploding object is a massive white dwarf. Methods.We perform several tests that are relevant to simulate explosive scenarios, such as Type Ia supernovae and core-collapse supernovae. We compare the results of the 90 nuclei network with a standardα-chain network with 14 elements to evaluate the differences in the energy generation rate. We also evaluate the relevance of including the electrons in the network in terms of generated yields and how it affects the pressure of a degenerate fluid such as that of white dwarfs. The results obtained with the 90-nuclei network have been verified with a much larger 2000-nuclei network built from REACLIB (WinNet), in terms of nuclear energy generation rate, pressure, and produced yields. Results.The results obtained with the proposed medium-sized network compare fairly well, to a few percent, with those computed withWinNetin scenarios reproducing the gross physical conditions of current Type Ia supernova explosion models. In those cases where the carbon and oxygen fuel ignites at high density, the high-temperature plateau typical of the nuclear statistical equilibrium regime is well defined and stable, allowing large integration time steps. We show that the inclusion of electron captures on free protons substantially improves the estimation of the electron fraction of the mixture. Therefore, the pressure is better determined than in networks where electron captures are excluded, which will ultimately lead to more reliable hydrodynamic models. Explosive combustion of helium at low density, occurring near the surface layer of a white dwarf, is also better described with the proposed network, which gives nuclear energy generation rates much closer toWinNetthan typical reduced alpha networks. Conclusions.A nuclear network withN= 90 species, including electrons, aimed at multidimensional calculations of supernova explosions is described and verified. The proposed network is suitable for the study of Type Ia supernova explosions because it provides better values of pressure and electron abundance than other existing networks with smaller or even a similar size but without including electron capture processes.

Astronomy & Astrophysics↗
DOE OSTI2024

Unveiling the purely young star formation history of the SMC’s northeastern shell from colour–magnitude diagram fitting

ABSTRACT We obtain a quantitative star formation history (SFH) of a shell-like structure (‘shell’) located in the northeastern part of the Small Magellanic Cloud (SMC). We use the Survey of the MAgellanic Stellar History to derive colour–magnitude diagrams (CMDs), reaching below the oldest main-sequence turnoff, from which we compute the SFHs with CMD-fitting techniques. We present, for the first time, a novel technique that uses red clump (RC) stars from the CMDs to assess and account for the SMC’s line-of-sight depth effect present during the SFH derivation. We find that accounting for this effect recovers a more accurate SFH. We quantify an $\sim$7 kpc line-of-sight depth present in the CMDs, in good agreement with depth estimates from RC stars in the northeastern SMC. By isolating the stellar content of the northeastern shell and incorporating the line-of-sight depth into our calculations, we obtain an unprecedentedly detailed SFH. We find that the northeastern shell is primarily composed of stars younger than $\sim$500 Myr, with significant star formation enhancements around $\sim$250 and $\sim$450 Myr. These young stars are the main contributors to the shell’s structure. We show synchronicity between the northeastern shell’s SFH with the Large Magellanic Cloud’s (LMC) northern arm, which we attribute to the interaction history of the SMC with the LMC and the Milky Way (MW) over the past $\sim$500 Myr. Our results highlight the complex interplay of ram pressure stripping and the influence of the MW’s circumgalactic medium in shaping the SMC’s northeastern shell.

Sakowska, Joanna D. (ORCID:0000000215941466)↗
DOE OSTI2024

Pressure dependence of intermediate-range order and elastic properties of glassy Baltic amber

Amber is a unique example of a fragile glass that has been extensively aged below its glass transition temperature, thus reaching a state that is not accessible under normal experimental conditions. In this paper, we studied the medium-range order of Baltic amber by x-ray diffraction (XRD) at high pressures. The pressure dependences of the low-angle XRD intensity between 0 and 5 Å -1 were measured from 0 to 7.3 GPa by the energy-dispersive XRD. The first diffraction peak at 1.1 Å -1 and ambient pressure has a doublet structure consisting of the first sharp diffraction peak (FSDP) at 1.05 Å -1 and the second feature at 1.40 Å -1 . The peak position and the width of the FSDP increase as the pressure increases, while the intensity of the FSDP decreases. Below P 0 = 2.4 GPa, the rapid increase of the FSDP peak position was observed, while above P 0 , the gradual increase was observed. Below P 0 , voids and holes in a relatively low-density state are suppressed, whereas above P 0 , the suppression becomes mild. Such a change suggests the crossover from the low- to high-density state at P 0 . There is a close correlation between the pressure dependence of XRD and previously reported sound velocity results. The correlation between the mean-square fluctuation of the shear modulus on the nanometer scale and fragility in amber and other glass formers is also discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Tree-based solvers for adaptive mesh refinement code FLASH – III: a novel scheme for radiation pressure on dust and gas and radiative transfer from diffuse sources

Radiation is an important contributor to the energetics of the interstellar medium, yet its transport is difficult to solve numerically. We present a novel approach towards solving radiative transfer of diffuse sources via backwards ray tracing. Here, we focus on the radiative transfer of infrared radiation and the radiation pressure on dust. The new module, TREERAY/RADPRESSURE, is an extension to the novel radiative transfer method TREERAY implemented in the grid-based Magneto-Hydrodynamics code FLASH. In TREERAY/RADPRESSURE, every cell and every star particle is a source of infrared radiation. We also describe how gas, dust, and radiation are coupled via a chemical network. This allows us to compute the local dust temperature in thermal equilibrium, leading to a significantly improvement over the classical grey approximation. In several tests, we demonstrate that the scheme produces the correct radiative intensities as well as the correct momentum input by radiation pressure. Subsequently, we apply our new scheme to model massive star formation from a collapsing, turbulent core of 150 M ⊙ . We include the effects of both, ionizing and infrared radiation on the dynamics of the core. We find that the newborn massive star prevents fragmentation in its proximity due to radiative heating. Over time, dust and radiation temperature equalize, while the gas temperature can be either warmer due to shock heating or colder due to insufficient dust–gas coupling. Compared to gravity, the effects of radiation pressure are insignificant for the stellar mass on the simulated time-scale in this work.

(ISM:) HII regions↗
DOE OSTI2022

Optimization of flow in additively manufactured porous columns with graded permeability

Chemical engineering systems often involve a functional porous medium, such as in catalyzed reactive flows, fluid purifiers, and chromatographic separations. Ideally, the flow rates throughout the porous medium are uniform, and all portions of the medium contribute efficiently to its function. The permeability is a property of a porous medium that depends on pore geometry and relates flow rate to pressure drop. Additive manufacturing techniques raise the possibilities that permeability can be arbitrarily specified in three dimensions, and that a broader range of permeabilities can be achieved than by traditional manufacturing methods. Using numerical optimization methods, we show that designs with spatially varying permeability can achieve greater flow uniformity than designs with uniform permeability. We consider geometries involving hemispherical regions that distribute flow, as in many glass chromatography columns. By several measures, significant improvements in flow uniformity can be obtained by modifying permeability only near the inlet and outlet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nonequilibrium effects and transverse spherocity in ultrarelativistic proton-nucleus collisions

We investigate the effects of nonequilibrium dynamics in small colliding systems by comparing a nonequilibrium transport approach, Parton-Hadron-String Dynamics (PHSD), with a (2+1)-dimensional viscous hydrodynamic model, VISHNew. Focusing on p + Pb collisions at energies available at the Large Hadron Collider, we extract the initial conditions for the hydrodynamic model from PHSD, in order to reduce the impact of the early out-of-equilibrium dynamics and focus on the traces of nonequilibrium in the ensuing medium evolution. We find that in the transport approach quantities like energy density and bulk viscous pressure are highly inhomogeneous on the transverse plane during the whole evolution, whereas the hydrodynamic simulations dissolve more efficiently the initial spatial irregularities, still keeping a high degree of inhomogeneity due to the smaller size and lifetime of the medium produced in p + Pb collisions with respect to heavy-ion reactions. As a first step that will help to identify the impact of these nonequilibrium effects on final observables in proton-nucleus collisions, we perform an analysis of the transverse spherocity, an event-shape observable able to distinguish between jetty and isotropic configurations of transverse momenta. We found that the spherocity distribution in PHSD is slightly shifted towards the isotropic limit with respect to the hydrodynamic result. Even though this dissimilarity is partially due to the difference in the final charged particle production, it mainly comes from the different description within the two frameworks of the medium produced in small colliding systems. This finding supports the idea that multidifferential measurements, such as those based on event categorization according to multiplicity and spherocity, are useful to study final-state observables in ultrarelativistic proton-nucleus collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗