SEARCH · Engineering Papers

Results for “MAP estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS2021

Estimated Ambient Sonic Boom Metric Levels and X-59 Signal-to-Noise Ratios across the USA

NASA is building the X-59 Quiet Supersonic Technology aircraft to produce low noise sonic booms for a series of community noise surveys across the USA. Survey participants will rate their perception of the low-booms from supersonic X-59 flyovers. Several noise metrics are proposed to quantify the noise dose: A-, B-, D-, and E-weighted Sound Exposure Level, Stevens Perceived Level, and Indoor Sonic Boom Annoyance Predictor. Sparse measurements across the survey area will be used to estimate community noise exposure. The level of these low-booms may be comparable to the ambient noise level in some locations, leading to uncertainty in noise exposure estimations. This uncertainty may necessitate increased reliance on sonic boom propagation predictions for exposure estimation. Low-boom signal to ambient noise ratio is one way to quantify uncertainty in measured sonic boom levels. An empirical relationship between A-weighted ambient level and sonic boom metric levels is used in conjunction with the National Park Service’s L50 SPL map to estimate ambient noise levels expressed in terms of sonic boom noise metrics across the USA. These estimates of ambient levels will aid in X-59 community test planning and execution. The signal-to-noise ratio for the undertrack X-59 sonic boom is also estimated, and an example application of these data is presented for comparing potential noise monitor sites prior to a community noise test.

X-59↗

NASA NTRS2011

Single-Frame Terrain Mapping Software for Robotic Vehicles

This software is a component in an unmanned ground vehicle (UGV) perception system that builds compact, single-frame terrain maps for distribution to other systems, such as a world model or an operator control unit, over a local area network (LAN). Each cell in the map encodes an elevation value, terrain classification, object classification, terrain traversability, terrain roughness, and a confidence value into four bytes of memory. The input to this software component is a range image (from a lidar or stereo vision system), and optionally a terrain classification image and an object classification image, both registered to the range image. The single-frame terrain map generates estimates of the support surface elevation, ground cover elevation, and minimum canopy elevation; generates terrain traversability cost; detects low overhangs and high-density obstacles; and can perform geometry-based terrain classification (ground, ground cover, unknown). A new origin is automatically selected for each single-frame terrain map in global coordinates such that it coincides with the corner of a world map cell. That way, single-frame terrain maps correctly line up with the world map, facilitating the merging of map data into the world map. Instead of using 32 bits to store the floating-point elevation for a map cell, the vehicle elevation is assigned to the map origin elevation and reports the change in elevation (from the origin elevation) in terms of the number of discrete steps. The single-frame terrain map elevation resolution is 2 cm. At that resolution, terrain elevation from 20.5 to 20.5 m (with respect to the vehicle's elevation) is encoded into 11 bits. For each four-byte map cell, bits are assigned to encode elevation, terrain roughness, terrain classification, object classification, terrain traversability cost, and a confidence value. The vehicle s current position and orientation, the map origin, and the map cell resolution are all included in a header for each map. The map is compressed into a vector prior to delivery to another system.

Rankin, Arturo L.↗

NASA NTRS2010

The Atacama Cosmology Telescope: A Measurement of the 600 less than l less than 8000 Cosmic Microwave Background Power Spectrum at 148 GHz

We present a measurement of the angular power spectrum of the cosmic microwave background (CMB) radiation observed at 148 GHz. The measurement uses maps with 1.4' angular resolution made with data from the Atacama Cosmology Telescope (ACT). The observations cover 228 deg(sup 2) of the southern sky, in a 4 deg. 2-wide strip centered on declination 53 deg. South. The CMB at arc minute angular scales is particularly sensitive to the Silk damping scale, to the Sunyaev-Zel'dovich (SZ) effect from galaxy dusters, and to emission by radio sources and dusty galaxies. After masking the 108 brightest point sources in our maps, we estimate the power spectrum between 600 less than l less than 8000 using the adaptive multi-taper method to minimize spectral leakage and maximize use of the full data set. Our absolute calibration is based on observations of Uranus. To verify the calibration and test the fidelity of our map at large angular scales, we cross-correlate the ACT map to the WMAP map and recover the WMAP power spectrum from 250 less than l less than 1150. The power beyond the Silk damping tail of the CMB (l approximately 5000) is consistent with models of the emission from point sources. We quantify the contribution of SZ clusters to the power spectrum by fitting to a model normalized to sigma 8 = 0.8. We constrain the model's amplitude A(sub sz) less than 1.63 (95% CL). If interpreted as a measurement of as, this implies sigma (sup SZ) (sub 8) less than 0.86 (95% CL) given our SZ model. A fit of ACT and WMAP five-year data jointly to a 6-parameter ACDM model plus point sources and the SZ effect is consistent with these results.

Fowler, J. W.↗

NASA NTRS2020

Characterization of the 2008 Phreatomagmatic Eruption of Okmok From ArcticDEM and InSAR: Deposition, Erosion, and Deformation

Okmok volcano, one of the most active volcanoes in the Aleutian Islands, erupted between 12 July and 19 August 2008 and produced a new tephra cone (Ahmanilix) up to 253 m high. A coeruptive deposit thickness map and the posteruptive elevation change rate map are generated for this phreatomagmatic eruption using the new, high-resolution (2 m) digital elevation model (DEM) time series provided by ArcticDEM. The total dense rock equivalent (DRE) volume over the proximal deposit field classified from the elevation change map is estimated as 0.147 ± 0.001 km 3 DRE (bulk volume of 0.453 ± 0.003 km 3 ). Combined with the distal deposit volume derived from field measurements, the total DRE is 0.25 km 3 (bulk volume of 0.76 km 3 ). The estimated erosion rate is up to −15 ± 3 m/year along the flanks of Ahmanilix, and the redeposition rate is about 1 ± 0.3 m/year at the base and 6 ± 1 m/year within the center of Ahmanilix. The surface elevation change also reveals a large ground surface collapse that disrupted the old Cone D lava bench, with a total collapse area of 0.15 km2 and a volume of (7.1 ± 0.4) × 10−3 km 3 . We also produce a coeruptive deformation map from satellite interferometric synthetic aperture radar (InSAR) using topography from both ArcticDEM and the Shuttle Radar Topography Mission (SRTM) and compare the results. Finally, based on historical eruption volumes, the magma supply rate at Okmok is estimated as (1.77 ± 0.1) × 10−3 km 3 /year.

Chunli Dai↗

NASA NTRS1984

The accuracy of altimetric surfaces

Estimates of the shape of the sea surface as determined from satellite altimeters have become of increasing importance in geophysics, geodesy and physical oceanography. The most effective error reduction procedures used in producing these surfaces have been some version of a crossing-arc analysis. The problem with this procedure is the absence of an easy means of evaluating the noise structure of the final result. By recasting the problem as one of objective mapping (optimal estimation) the error reduction is optimized and an explicit estimate is obtained of the wave-number structure of the final altimetric surface. Examples, suitable to a small computer, have been generated to show that the error reduction along the sub-satellite tracks is very great, with most of the residual lying in long wavelengths.

Wunsch, C.↗

DOE OSTI2025

Hierarchical Bayesian Inverse Problems: A High-Dimensional Statistics Viewpoint

This paper analyzes hierarchical Bayesian inverse problems using techniques from highdimensional statistics. Furthermore, our analysis leverages a property of hierarchical Bayesian regularizers that we call approximate decomposability to obtain non-asymptotic bounds on the reconstruction error attained by maximum a posteriori estimators. The new theory explains how hierarchical Bayesian models that exploit sparsity, group sparsity, and sparse representations of the unknown parameter can achieve accurate reconstructions in high-dimensional settings.

MAP estimation↗

NASA NTRS1986

Description of data on the Nimbus 7 LIMS map archive tape: Temperature and geopotential height

The process by which the analysis of the Limb Infared Monitor of the Stratosphere (LIMS) experiment data were used to produce estimates of synoptic maps of temperature and geopotential height is described. In addition to a detailed description of the analysis procedure, several interesting features in the data are discussed and these features are used to demonstrate how the analysis procedure produced the final maps and how one can estimate the uncertainties in the maps. In addition, features in the analysis are noted that would influence how one might use, or interpret, the results. These include subjects such as smoothing and the interpretation of wave components. While some suggestions are made for an improved analysis of the data, it is shown that, in general, the maps are an excellent estimation of the synoptic fields.

Haggard, K. V.↗

NASA NTRS2023

Predicting Patterns of Solar Energy Buildout to Identify Opportunities for Biodiversity Conservation

The construction of solar energy facilities can have positive or negative impacts on biodiversity depending on siting and associated land use transitions. We identified drivers of solar siting and quantified patterns of buildout in states surrounding the Chesapeake Bay watershed – a biodiversity hotspot with numerous ecosystem services. Using a convolutional neural network, we mapped the footprints of ground-mounted solar arrays present in satellite imagery annually from 2017 to 2021 in Delaware, Maryland, Pennsylvania, New York, Virginia, and West Virginia. As of 2021, we identified 958 solar arrays covering 52.3 km2 built primarily on previously cultivated land, while avoiding natural landcover. We fit a binomial-Weibull model to these solar timeseries data in a hierarchical, Bayesian framework to quantify the relationship between geospatial covariates and rate of solar development. Solar array construction rate increased in cultivated areas, areas of lower agricultural suitability, lower slope, lower forest cover, lower biodiversity protection, and greater distances from roads. We also estimated changes in the rate of solar construction over time and found differences among states: acceleration in Virginia and deceleration in New York. We used parameter estimates to map the relative likelihood of future solar development across the study area. This methodology can be used to anticipate where solar is likely to be built in different landscapes and how these patterns align with conservation goals. Around the Chesapeake Bay watershed, the selection of lower quality agricultural areas for solar energy minimizes removal of important habitat and provides opportunities for native plant and pollinator restoration.

Artificial Intelligence↗

NASA NTRS2005

Mapping of ice layer extent and snow accumulation in the percolation zone of the Greenland ice sheet

The Greenland ice sheet underwent record extensive melt in 2002 and prolonged melt in 2003. The severe melting created a significant and extensive ice layer over the Greenland ice sheet. An innovative approach is developed to detect the ice layer formation using data acquired by the SeaWinds scatterometer on the QuikSCAT satellite. QuikSCAT backscatter together with in situ data from automatic weather stations of the Greenland Climate Network are used to map the extent of ice layer formation. The results reveal areas of extensive ice layer formed by the 2002 melt, which is consistent with the maximum melt extent in 2002. Moreover, during freezing seasons, QuikSCAT data show a linear decrease in backscatter (in decibels or dB) that is related to the amount of snow accumulation in the ice layer formation region. This snow accumulation signature is caused by the attenuation of radar waves in the snow layer, accumulating since the last major melt event, whose thickness appears as an exponential function in relation to the backscatter signature. We use the Greenland Climate Network data to calibrate the QuikSCAT accumulation rate in order to estimate and map snow accumulation. QuikSCAT results capture the extreme snowfall in mid-April 2003, which deposited more than 0.5 m of snow in a day as measured by the automated weather station at the NASA South East site. Large-scale QuikSCAT results show an anomalous increase of snow accumulation over the southeast region of Greenland during the 2002-2003 freezing season.

snow↗

DOE OSTI2024

Human activities shape global patterns of decomposition rates in rivers

Rivers and streams contribute to global carbon cycling by decomposing immense quantities of terrestrial plant matter. However, decomposition rates are highly variable and large-scale patterns and drivers of this process remain poorly understood. Using a cellulose-based assay to reflect the primary constituent of plant detritus, we generated a predictive model (81% variance explained) for cellulose decomposition rates across 514 globally distributed streams. A large number of variables were important for predicting decomposition, highlighting the complexity of this process at the global scale. Predicted cellulose decomposition rates, when combined with genus-level litter quality attributes, explain published leaf litter decomposition rates with high accuracy (70% variance explained). Finally, our global map provides estimates of rates across vast understudied areas of Earth and reveals rapid decomposition across continental-scale areas dominated by human activities.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Data from: 'Abiotic influences on continuous conifer forest structure across a subalpine watershed'

This package archives the core data used for analysis and inference in 'Abiotic influences on continuous conifer forest structure across a subalpine watershed' (Worsham et al., 2025). All data were collected in the East River, Washington Gulch, Slate River, and Coal Creek watersheds of Colorado. In the paper, we quantified the relative influence of climate, topographic, edaphic, and geologic factors on conifer stand structure and composition, and their functional relationships, at the watershed scale. We used waveform LiDAR data to derive spatially continuous stand structure metrics. We fused these with a species-level classification map to estimate tree species abundance. We applied generalized additive and generalized boosted models to evaluate the covariability of structural and compositional metrics with abiotic variables. The package contains the essential products required for reproducing our analysis and the tables and figures reported in the publication. The products comprise four classes: (1) geospatial data, (2) tabular data used for inferential analysis, (3) tabular data describing analytical results and performance statistics, and (4) a data user guide. (1) includes discretized waveform LiDAR data, locations and attributes of individual tree crowns, sampling locations and domain boundaries, a canopy height model, and raster files of estimated forest structural and compositional metrics at 100 m grid scale. (2) includes all response and explanatory variable values applied in inferential models. Response variables include conifer forest stand density, basal area, 95th percentile height, quadratic mean diameter, and others. Explanatory variables include climatic water deficit, actual evapotranspiration, elevation, heat load, soil available water content, and others. (3) includes results of training and testing several individual tree detection (ITD) algorithms, as well as inferential modeling results. (4) is a PDF user guide for this data package, including detailed descriptions and data dictionaries for all files. The data package root contains 17 assets: 8 compressed tape archive (.tar.gz) files, 5 comma-separated values (.csv) files, 3 Geographic Tagged Image File Format (GeoTIFF) (.tif) files, and 1 Portable Document Format (.pdf) file. The compressed .tar.gz archives contain ESRI shapefiles (.shp) .tif, compressed LASer (.laz), and .csv files. The archives must first be decompressed using the widely distributed command-line software utility TAR. All other files, including constituent files within the .tar.gz archives, can be opened in the open-source R statistical computing environment. Alternatively, .csv files may also be read in any simple text editor software or Microsoft Excel. Geospatial files including .shp and .tif files can also be opened in GIS software, such as QGIS (open-source) or ESRI ArcGIS (proprietary). The .pdf Data User Guide can be read with Adobe Acrobat Reader or other compatible readers.

2018 NEON and 2025 CHESS Campaigns↗

NASA NTRS1965