Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Localized states”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Spectroscopic Investigation into P(NDI2OD-T2) Charge Localization

P(NDI2OD-T2), commonly referred to as N2200, stands out as a promising electron-transporting (n-type) polymer for low-cost, flexible (photo)electrochemical applications due to its reversible two-electron reduction and high electron mobility. UV–vis spectroelectrochemistry in the tetrabutyl ammonium hexafluorophosphate/acetonitrile electrolyte shows two sets of chemically reversible redox signals in the cyclic voltammetry corresponding to the reduction of the neutral polymer film to polaronic and bipolaronic species. These electrochemical signatures suggest a distinct electronic reorganization upon reduction (polaron/bipolaron formation), highlighting the need for molecular-level insights into how charges are accommodated within the polymer backbone. While it has been previously hypothesized that charge predominantly localizes on the naphthalene diimide (NDI) unit during reductive charging, specific changes in atomic environments that confirm this localization have not been characterized in n-type polymers. Herein, we use near-edge X-ray absorption fine structure (NEXAFS) spectroscopy to probe electronic transitions in an electrochemically charged polymer to deduce charge localization. The O K-edge (1s) spectra exhibit two distinct π* peaks; the intensity of the lower-energy π* a peak that corresponds to an excitation to a largely localized carbonyl state decreases with reductive potentials relative to the higher-energy π* b peak. We corroborate this with Raman spectroscopy at different potentials, which shows a decrease in intensity on the C–C/C═C and C═O stretching bands of NDI as well as a red shift of the carbonyl band due to the formation of a polaron on the NDI. Additionally, new Raman active NDI signals associated with elongated C═O and C═C bonds are observed at lower energy during the formation of charged states. Together with theoretical calculations, these findings show that the injected charge spatially localizes on the NDI units and is dominantly distributed on the carbonyl groups. In conclusion, the combination of NEXAFS, optical and vibrational spectroscopies, and theoretical calculations is generalizable to other pi-conjugated polymers and can identify charge localization for the further development of organic semiconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The role of irradiation-enhanced interstitial diffusion in over-pressurizing fission gas bubbles in UO 2

Fission gas bubbles in UO 2 nuclear fuel have been observed to exhibit pressures in excess of the equilibrium bubble pressure; however, the cause of bubble over-pressurization has not yet been demonstrated. The mechanical interaction between a bubble and the surrounding matrix or grain boundary depends on the internal pressure of the bubble and local stress state, such that over-pressurized bubbles are thought to be responsible for fragmentation and pulverization, when exposed to a temperature ramp. Here, in this work, we investigate the role of U interstitials, produced through irradiation, in over-pressurizing bubbles by using a combined molecular dynamics (MD) and cluster dynamics approach. Firstly, the energies for the capture of interstitials and vacancies by bubbles have been determined from MD as a function of the ratio of gas atoms to vacancies that make up the bubble. Secondly, these reaction energies have been implemented in the cluster dynamics code Centipede to predict bubble over-pressurization as a function of temperature for typical fission rates. It was found that there is a transition from low pressure bubbles (at high temperatures) to high pressure bubbles (at lower temperatures). The cause of this behavior was shown to be the creation of irradiation-induced interstitials that are highly mobile relative to vacancies at low temperature; whereas, vacancies are sufficiently mobile at high temperatures to limit bubble pressures. This result supports the hypothesis that over-pressurized bubbles form during steady-state operation and that this behavior is highly sensitive to the local pellet temperature.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Adaptive Quantum Generative Training using an Unbounded Loss Function

We propose a generative quantum learning algorithm using the Adaptive Derivative-Assembled Problem Tailored ansatz (ADAPT) framework in which the loss function to be minimized is the maximal quantum Rényi divergence of order two, an unbounded function that mitigates barren plateaus which inhibit training variational circuits. We benchmark this method against other state-of-the-art adaptive algorithms by learning random two-local thermal states. We perform numerical experiments of up to 12 qubits comparing our method learning algorithms that use linear objective functions and show that Rényi-ADAPT is capable of constructing shallow quantum circuits competitive with existing methods, while the gradients remain favorable resulting from the maximal Rényi divergence loss function.

quantum algorithms, quantum machine learning, quan↗
DOE OSTI2026

Chemically Enabled CO 2 -Enhanced Oil Recovery in Multi-Porosity, Hydrothermally Altered Carbonates in the Southern Michigan Basin (Final Technical Report)

This is the Final Technical Report for the project "Chemically Enabled CO 2 -Enhanced Oil Recovery in Multi-Porosity, Hydrothermally Altered Carbonates in the Southern Michigan Basin." Over the course of six years of collaboration between Battelle and project partners, all stated objectives of the program have been completed, including full geological characterization of the TBR trend (See companion report for Task2), laboratory and modeling experiments to determine the optimum composition and design of CO 2 -EOR operations in the TBR trend, execution of a field test of chemically-enhanced CO 2 in a TBR well, and integration of the data and learnings gathered during these efforts into a full-trend development plan. Detailed reporting on these activities, their outcomes, and implications for trend-wide development is provided in the report. This report and encompassed data will provide TBR field operators with detailed information on what worked, what did not work, and how to proceed with production optimization of their TBR assets using chemically-enhanced CO 2 -EOR. CO 2 -EOR is a relatively well understood and broadly implemented strategy for increasing incremental production across the oil and gas industry, but its application has been primarily focused on reservoirs with limited heterogeneity. The intention of this project was show first that the same physical mechanisms that improve recovery factors in homogeneous reservoirs (namely wettability alteration, viscosity alteration, oil swelling, and mobility control) are at play in heterogeneous reservoirs. This was proven by the project’s laboratory studies and dynamic simulations, with the potential exception of mobility control, which needs further study. The second intention was to demonstrate via direct field testing that CO 2 -EOR can work in a strongly heterogeneous reservoir. While the field test strategy implemented during this project did not succeed in producing oil, data gathered during the test sheds light on what may work for field operators who try chemically-enhanced CO 2 -EOR within their own reservoirs, significantly reducing the level of uncertainty carried by first-of-a-kind commercial efforts that could (and should) follow this test. Simultaneously, the project has identified several large-volume ethanol plants and other sources of CO 2 emissions in the region and provided a handrail that CO 2 emitters and field operators can leverage to capture, transport, and inject that CO 2 into their fields. This project has also shown that, in many cases, the economics of CO 2 -EOR in the TBR are attractive. And finally, by completing a project of this scope in the southern Michigan Basin, the project has contributed to the knowledge base and operational experience of field operators, state regulatory agencies, local service companies, and state universities, with CO 2 -EOR projects which should allow follow-on projects to proceed safely and efficiently.

02 PETROLEUM↗
DOE OSTI2026

Microwave Imaging of Edge Conductivity in Graphene at Charge Neutrality and Quantum Hall States

Here, we report local conductivity imaging of edge states in monolayer graphene by millikelvin microwave impedance microscopy. At the charge-neutrality point, as the magnetic field increases, the local conductivity at the edge drops to zero more slowly than in the bulk. This behavior is consistent with the calculated spatial profile of the charge gap in the canted antiferromagnetic phase. For comparison, we also perform microwave imaging of integer quantum Hall states away from neutrality, which host dissipationless chiral edge channels. The evolution of the edge signal as a function of the bulk gap is fundamentally different between the Landau level filling factor 𝜈 = 0 and |𝜈| ≥ 1 integer quantum Hall states, which can be qualitatively explained by numerical simulations and theoretical analysis. Our results provide a comprehensive microscopic picture of the edge and bulk states as the Fermi level moves across the unique Landau-level spectrum of graphene.

Hall effect↗
DOE OSTI2026

Explainable machine learning reveals that local structural motifs encode the thermodynamic state across the CuZr metallic glass-forming range

Metallic glasses derive their properties from the statistics of local atomic motifs rather than from long-range order, yet a quantitative, chemistry-specific link between motif populations and the underlying glassy state has remained elusive. In this work we combine large-scale molecular dynamics, Voronoi tessellation, deep neural networks, and SHapley Additive exPlanations (SHAP) to identify which local structural motifs define the glassy state of Cu—Zr metallic glasses. A dataset of 17,180 atomistic configurations spanning ten compositions (Cu 20 Zr 80 –Cu 80 Zr 20 ) and four quench rates (10 9 –10 12 K/s) is used to train a feed-forward neural network that regresses temperature across the 50–2000 K liquid–supercooled–glass range, achieving a mean absolute error of 19.89 K and R 2 = 0.9974, confirming that the local structural state is faithfully encoded in motif-level structure. SHAP analysis then reveals that a tightly coupled near-icosahedral family of motifs (coordination numbers (CN) 11–13, including the full icosahedron 001200 and its single-atom-perturbation sibling 10930) collectively encodes the thermodynamic state of the system across the full glass-forming range. The CN = 11–13 ordered members carry negative SHAP values at high populations, tracking the most deeply-quenched configurations, while 10930 shows the reversed signature consistent with its role as a soft-spot host whose population shrinks as the icosahedral network deepens. The analysis demonstrates that explainable machine learning can isolate the minimal motif vocabulary defining the glassy state and recovers the near-icosahedral building blocks previously identified by data-driven analyses of Cu—Zr. The approach provides a general, chemistry-specific route for characterizing the structural state of disordered materials.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Community Solar Policy Landscape and Pathways to Meaningful Benefits: A Review of Equitable Access and Household Savings

As of August 2024, community solar legislation and policies have been implemented in 24 U.S. states and localities, including the District of Columbia. These policies have driven significant growth in the community solar market. The states that have enacted legislation accounting for over 62.8% of the country's installed capacity. Community solar policy designs are evolving, with many states expanding programs, enhancing equitable access, and ensuring household savings.

14 SOLAR ENERGY↗
DOE OSTI2025

Orbital-Selective Instabilities and Spin Fluctuations at the Verge of Superconductivity in Interlayer-Expanded Iron Selenide

Understanding electron correlation-driven instabilities and their coupling to structural phases is essential for deciphering multiorbital pairing in unconventional superconductors. We investigate Li x (C 5 H 5 N) y Fe 2 Se 2 (x ∼ 0.6; y ∼ 0.7−0.9), a tetragonal β-FeSe intercalate with a superconducting transition temperature (T c = 39 K) closely tied to an expanded Fe-layer spacing (∼11.4 Å). High-resolution synchrotron Xray diffraction and core-level absorption spectroscopy reveal subtle lattice distortions on cooling without a symmetry-breaking transition. Instead, the material exhibits negative thermal expansion (NTE) in the two-dimensional Fe network below T S ∼ 70 K, and stiffening of local Se−Fe−Se bond dynamics near T c . The spatially incoherent rearrangement of FeSe 4 tetrahedra and the site-local fluctuations, signal reduced electron correlations compared to those of parent β-FeSe (T c = 8 K). Complementary X-ray emission spectroscopy, a fast local probe of Fe 3d valence states, detects persistent local Fe spin moments below T S , unlike quenching in related systems. These findings indicate that decoupling of Fe planes leads to an electronically driven lattice instability. The latter emerges as NTE induced from weak, orbital-selective localization of in-plane Fe 3d states rather than conventional transverse vibrations. Governed by Hund’s coupling, this selectivity permits coexistence of local spin fluctuations with itinerant d-electrons critical for enhancing T c . These results suggest that intercalation-driven d-orbital differentiation moderates electron correlations, providing a pathway to optimize the superconductivity in low-dimensional quantum materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Go slow to go fast? A review of the impacts of permitting on large-scale solar project development

State and local permitting challenges could impede the ability of large-scale solar (LSS) to meet growing electricity demand in the United States. Here, we review research that explores LSS permitting and its impacts on the pace and scale of LSS project development. Research on LSS permitting is relatively scarce, such that we support our review with research in the context of wind permitting, where appropriate. Further, few studies attempt to rigorously quantify the effects of permitting on the pace and scale of LSS project development. The available evidence allows us to identify various hypotheses and identify gaps for further research. Our review suggests that differences in permitting policies, regulations, and ordinances explain relatively little variation in LSS permitting and development outcomes across jurisdictions, except where jurisdictions implement rules designed to impede LSS. The evidence suggests LSS permitting challenges largely accrue during the implementation of permitting processes. Recent research suggests that community opposition to project development is a key driver of LSS permitting challenges, given that project opponents often use permitting processes to translate opposition into legal action. We call on future researchers to more concretely describe the LSS permitting challenge and to identify the specific actors responsible for implementing solutions.

Community opposition↗
DOE OSTI2024

State Requirements for Electric Distribution System Planning

Utilities have conducted distribution planning since they first began building and operating electricity systems. But filing these plans for regulatory and stakeholder review is a relatively recent phenomenon. This report summarizes legislative and regulatory requirements for regulated electric utilities to file some type of distribution system plan in 20 U.S. jurisdictions. Some plans focus on expedited cost recovery for certain types of distribution system improvements; other plans focus on investments for grid modernization or distributed energy resources. Increasingly, states are adopting requirements for Integrated Distribution Plans. Such plans provide holistic grid investment strategies that address state and local policies and increasing complexity at the grid edge. The report covers the following topics for distribution system plans, highlighting advanced practices: -State goals and objectives -Procedural requirements -Forecasting loads and distributed energy resources -Hosting capacity analysis -Baseline information requirements -Grid modernization strategy -Grid needs assessment -Non-wires solutions -Reliability and resilience analyses -Stakeholder engagement -Equity -Pilots -Coordination with other planning processes The report includes links to legislation; regulatory requirements, proceedings, and orders; and filed utility plans. The U.S. Department of Energy’s Office of Electricity provided funding support.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2025

Methodology to Establish Performance Targets for Building Energy Codes

This report explains the underlying development of the U.S. NZE building sector performance targets reported in Federal Register Notice XX. This document also includes NZE performance targets for U.S. states, which were developed following the same procedures used to develop the national values. These national and state targets are intended to support the establishment and attainment of NZE goals over time. Where residential and commercial building energy code compliance mechanisms apply to new buildings and major renovations and dictate performance requirements, these targets reflect the recommended, minimum levels of performance. Appendix A provides the performance values and targets by U.S. state for residential and commercial buildings. These include each state’s adopted energy code performance, current published MEC performance value, and a nominal NZE code compliance performance target. The current code and NZE values can be compared to the state adopted code value to indicate the level of advancement needed to move towards recommended NZE building performance levels. Additional supplemental resources are available to support states and local governments ready to move from setting NZE policy goals to adopting NZE codes. More information about these resources and the actions states can take to achieve NZE buildings with energy codes are provided in the body of this document.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Electrical Energy Storage by Poly(ionic Liquids)

Abstract Manipulating van der Waals (vdW) and ionic interactions in polymers enable energy storage and formations of active or passive components of electrical circuits. The energy storage is achieved by electrically activating ion pairs containing polymers, which create ergotropically favorable non‐equilibrium gradient states. Molecular‐level events responsible for this behavior involve concurrent ion pairs' polarization‐depolarization gradients and conformational changes of aliphatic tails that collectively contribute to lowering local disorder states. Manipulating ionic and vdW interactions stabilizes polarized anion‐cation pairs, thus maintaining electrical energy storage for extended periods. These transparent and easily moldable materials require no multilayered assemblies, and their functional features depend upon polarization conditions and ionic‐vdW interactions, making them applicable in energy storage and other devices transcending classical time intricacy limits.

Liu, Jiahui [Department of Materials Science and E↗
DOE OSTI2025

Electrical Energy Storage by Poly(ionic Liquids)

Abstract Manipulating van der Waals (vdW) and ionic interactions in polymers enable energy storage and formations of active or passive components of electrical circuits. The energy storage is achieved by electrically activating ion pairs containing polymers, which create ergotropically favorable non‐equilibrium gradient states. Molecular‐level events responsible for this behavior involve concurrent ion pairs' polarization‐depolarization gradients and conformational changes of aliphatic tails that collectively contribute to lowering local disorder states. Manipulating ionic and vdW interactions stabilizes polarized anion‐cation pairs, thus maintaining electrical energy storage for extended periods. These transparent and easily moldable materials require no multilayered assemblies, and their functional features depend upon polarization conditions and ionic‐vdW interactions, making them applicable in energy storage and other devices transcending classical time intricacy limits.

Liu, Jiahui [Department of Materials Science and E↗
DOE OSTI2026

Radiative Electronic Bound States in the Continuum from Defects in Semiconductors

Continuum-buried defect states in semiconductors are generally expected to be optically inactive because of their strong coupling to continuum bands. Here, we show that such defects can instead host radiative electronic bound states in the continuum (BICs) using the silicon G center as a prototypical example. Hybrid functional first-principles calculations with a Hubbard U correction reveal that a localized defect state, initially buried below the valence band maximum (VBM) in the ground state, undergoes exchange-driven energy-level reordering under optical excitation and shifts above the VBM. This exchange-induced transition suppresses nonradiative decay and enables a robust radiative emission. By computing temperature-dependent nonradiative lifetimes and comparing them to experimental photoluminescence (PL) lifetimes, we quantitatively reproduce the observed temperature dependence of the emission. These results uncover a stabilization mechanism for continuum-embedded defect states and establish electronic BICs as a general paradigm for designing defect-based optical systems, including quantum emitters and qubits.

Hong, SeongYun↗
DOE OSTI2025

Noisy Approach to Intrinsically Mixed-State Topological Order

We propose a general framework for studying two-dimensional (2D) topologically ordered states subject to local correlated errors and show that the resulting mixed state can display (imTO)—topological order that is not expected to occur in the ground state of 2D local gapped Hamiltonians. Specifically, we show that decoherence, previously interpreted as anyon condensation in a doubled Hilbert space, is more naturally phrased as, and provides a physical mechanism for, “gauging out” anyons in the original Hilbert space. We find that gauging out anyons generically results in imTO, with the decohered mixed state strongly symmetric under certain anomalous 1-form symmetries. This framework lays bare a striking connection between the decohered density matrix and , which can appear as anomalous surface states of three-dimensional topological orders. Through a series of examples, we show that the decohered state can display a classical memory, encode logical qubits (i.e., exhibit a quantum memory), and even host chiral or nonmodular topological order. We argue that a partial classification of imTO is given in terms of nonmodular braided-fusion categories. Published by the American Physical Society 2025

Sohal, Ramanjit (ORCID:0000000292975715)↗
DOE OSTI2024

Disorder-induced local strain distribution in Y-substituted TmVO 4

We report an investigation of the effect of substitution of Y for Tm in Tm 1-x ⁢Y x VO 4 via low-temperature heat capacity measurements, with the yttrium content x varying from 0 to 0.997. Because the Tm ions support a local quadrupolar (nematic) moment, they act as reporters of the local strain state in the material, with the splitting of the ion's non-Kramers crystal field ground state proportional to the quadrature sum of the in-plane tetragonal symmetry-breaking transverse and longitudinal strains experienced by each ion individually. Analysis of the heat capacity, therefore, provides detailed insights into the distribution of local strains that arise as a consequence of the chemical substitution. These local strains suppress long-range quadrupole order for x > 0.22, and result in a broad Schottky-like feature for higher concentrations. Heat capacity data are compared to expectations for a distribution of uncorrelated (random) strains. For dilute Tm concentrations, the heat capacity cannot be accounted for by randomly distributed strains, demonstrating the presence of significant strain correlations between sites. For intermediate Tm concentrations, these correlations must still exist, but the data cannot be distinguished from that which would be obtained from a two-dimensional Gaussian distribution. The crossover between these limits is discussed in terms of the interplay of key lengthscales in the substituted material. Furthermore, the central result of this work, namely that local strains arising from chemical substitution are not uncorrelated, has implications for the range of validity of theoretical models based on random effective fields that are used to describe such chemically substituted materials, particularly when electronic nematic correlations are present.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Optimizing Fleet Operations With Telematics [Slides]

Through the U.S. Department of Energy's Energy to Communities (E2C) program, NLR, other national laboratory experts, and select organizations provide Expert Match - free, short-term technical assistance to address near-term energy challenges and questions. Expert Match is for community stakeholders who have decision-making power or influence in their community but need access to additional energy expertise to inform key upcoming decisions. This Expert Match request supported Prince William County, VA with information about fleet charging and telematics.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗