Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Layered materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Design of a Three-Layer Impactor for Material Strength Measurements at Multi-Megabar Pressures

Off-Hugoniot loading methods for dynamic compression have been a topic of interest for many years as a means of accessing high pressures without melting a material. Simulations and an initial test experiment of a three-layer gas-gun impactor suitable for use in measuring dynamic material strength at multi-megabar pressures are described. As shown through ARES hydrocode simulations, an impactor consisting of a low-, medium-, and high-impedance material, such as TPX, Al, and Ta or Pt, can produce a quasi-isentropic loading path up to 4.6 Mbar pressure with a low homologous temperature (T/T melt = 0.1–0.25). These impactors can also be tailored to create a pressure drive suitable for a Lagrangian sound speed experiment. Simulated in-situ velocities were analyzed to determine the change in calculated strength due to non-uniformity in the impactor, which provides a measure of error sensitivity. An initial test of a three-layer projectile onto a flat target at 4.4 km/s impact velocity is reported. Finally, while the impactor incurred some delamination during firing, the measured sample/window interface velocity generally agrees with the simulated peak velocity and subsequent release, indicating the feasibility of this approach for measuring material strength.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Enhanced Activity in Layered Metal-Oxide-Based Oxygen Evolution Catalysts by Layer-by-Layer Modulation of Metal-Ion Identity

Few-layered potassium nickel and cobalt oxides show drastic differences in catalytic activity based on metal ion preorganization. Uniform compositions [(CoO 2 /K) 6 or (NiO 2 /K) 6 ] show limited activity, while homogeneously mixed-metal cobalt/nickel oxides [(Co n Ni (1–n) O 2 /K) 6 ] display moderate improvement. However, a layer-by-layer arrangement of alternating cobalt and nickel oxide sheets [e.g., (CoO 2 /K/NiO 2 /K)] provides superior catalytic performance, reducing the oxygen evolution overpotential by ∼200–400 mV. Density functional theory simulations provide an illustration of the electronic properties (density of states and localization of orbitals) that promote catalysis in the layer-segregated materials over those of homogeneous composition. This study reveals that atomic preorganization of metal ions within layered catalysts plays a more crucial role than the overall metal composition in enhancing catalytic efficiency for oxygen evolution.

catalysts↗
DOE OSTI2024

The effect of gamma ray irradiation on few layered MoSe2: A material for nuclear and space applications

In recent years, emerging two-dimensional (2D) materials, such as molybdenum diselenide (MoSe2), have been at the center of attention for many researchers. This is due to their unique and fascinating physicochemical properties that make them attractive in space and defense applications that include shielding harsh irradiation environments. In this study, we examined the effects of gamma (γ) rays at various doses on the structural, chemical, and optical properties of MoSe2 layers. After the samples were exposed to intense gamma radiation (from a 60Co source) with various exposure times to vary the total accumulated dosage (up to 100 kGy), Raman and photoluminescence spectroscopies were used to study and probe radiation-induced changes to the samples. When compared to pristine materials, very few changes in optical properties were typically observed, indicating good robustness with little sensitivity, even at relatively high doses of gamma radiation. The imaging using scanning electron microscopy revealed a number of nano-hillocks that were connected to substrate alterations. X-ray photoelectron spectroscopies revealed that Mo’s binding energies remained the same, but Se’s binding energies blueshifted. We associated this shift with the decrease in Se vacancies that occurred after irradiation as a result of Mo atoms creating adatoms next to Se atoms. When compared to pristine materials, very few changes in optical, chemical, and structural properties were typically observed. These findings highlight the inherent resilience of MoSe2 in hostile radioactive conditions, which spurs additional research into their optical, electrical, and structural characteristics as well as exploration for potential space, energy, and defense applications.

Materials Science↗
DOE OSTI2025

Unraveling the origin of air-stability in single-crystalline layered oxide positive electrode materials

Single-crystalline Ni-rich layered oxides present compelling advantages over conventional polycrystalline counterparts toward large-scale applications, including enhanced mechanical stability and higher energy density. Nevertheless, the deleterious effects of air exposure, which is inevitable in industrial processing, on their structure and electrochemical performance remain poorly understood. Herein, we reveal that air exposure is more detrimental to the electrochemical performance of single-crystalline layered oxide positive electrodes than polycrystalline counterparts. It is found that air-induced surface structural distortions are primarily responsible for the electrochemical performance decay of single-crystalline samples rather than the generally believed surface residual lithium. Leveraging multiscale diffraction and imaging techniques, we identify an undesirable structural transition to a metastable O1* phase, which introduces substantial lattice defects and localized strain concentrations within the layered structure. These adverse structural evolutions compromise structural integrity and promote crack initiation during electrochemical cycling, ultimately accelerating capacity fade. Our findings provide critical insights into the air-induced degradation mechanisms and emphasize the urgent need for developing effective stabilization strategies to facilitate the commercial implementation of single-crystalline Ni-rich positive electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ion-Assisted Nanoscale Material Engineering in Atomic Layers

Achieving deterministic control over the properties of low-dimensional materials with nanoscale precision is a long-sought goal. Mastering this capability has a transformative effect on the design of multifunctional electrical and optical devices. Here, we present an ion-assisted synthetic technique that enables precise control over the material composition and energy landscape of two-dimensional (2D) atomic crystals. Our method transforms binary transition-metal dichalcogenides, like MoSe2, into ternary MoS2αSe2(1-α) alloys with systematically adjustable compositions, α. By piecewise assembly of the lateral, compositionally modulated MoS2αSe2(1-α) segments within 2D atomic layers, we present a synthetic pathway toward the realization of multicompositional designer materials. Our technique enables the fabrication of advanced 2D structures with arbitrary boundaries, dimensions as small as 30 nm, and fully customizable energy landscapes. Our optical characterizations further showcase the potential for implementing tailored optoelectronics in these engineered 2D crystals.

2D materials↗
DOE OSTI2024

A layered solid finite element formulation with interlaminar enhanced displacements for the modeling of laminated composite structures

Accurate modeling of layered composite structures often requires the use of detailed finite element models which can sufficiently resolve the kinematics and material behavior within each layer of the composite. However, individually discretizing each material layer into finite elements presents a prohibitive computational expensive given the large number of thin layers comprising some laminated composites. To address these challenges, an 8-node layered solid hexahedral finite element is formulated with the aim of striking an appropriate balance between efficiency and fidelity. The element is discretized into an arbitrary number of distinct material layers, and employs reduced in-plane integration within each layer. The chosen reduced integration scheme is supplemented by a novel physical stabilization approach which includes layerwise enhancements to mitigate various forms of locking phenomena. The proposed framework additionally supports the inclusion of interlaminar enhanced displacements to better represent the kinematics of general layered composite materials. Finally, the described element formulation has been implemented in the ParaDyn finite element code, and its efficacy for modeling laminated composite structures is demonstrated on a variety of verification problems.

42 ENGINEERING↗
DOE OSTI2024

Hybrid bilayered vanadium oxide electrodes with large and tunable interlayer distances in lithium-ion batteries

The interlayer distances in layered electrode materials, influenced by the chemical composition of the confined interlayer regions, have a significant impact on their electrochemical performance. Chemical preintercalation of inorganic metal ions affects the interlayer spacing, yet expansion is limited by the hydrated ion radii. Herein, we demonstrate that using varying concentrations of decyltrimethylammonium (DTA + ) and cetyltrimethylammonium (CTA + ) cations in chemical preintercalation synthesis followed by hydrothermal treatment, the interlayer distance of hybrid bilayered vanadium oxides (BVOs) can be tuned between 11.1 Å and 35.6 Å. Our analyses reveal that these variations in interlayer spacing are due to different amounts of structural water and alkylammonium cations confined within the interlayer regions. Increased concentrations of alkylammonium cations not only expand the interlayer spacing but also induce local bending and disordering of the V-O bilayers. Electrochemical cycling of hybrid BVO electrodes in non-aqueous lithium-ion cells show that specific capacities decrease as interlayer regions expand, suggesting that the densely packed alkylammonium cations obstruct intercalation sites and hinder Li + ion transport. Furthermore, we found that greater layer separation facilitates the dissolution of active material into the electrolyte, resulting in rapid capacity decay during extended cycling. In conclusion, this study emphasizes that layered electrode materials require both spacious interlayer regions as well as high structural and chemical stabilities, providing guidelines for structural engineering of organic–inorganic hybrids.

25 ENERGY STORAGE↗
DOE OSTI2024

Artificial-Intelligence Aided Design and Synthesis of Novel Layered 2D Multi-Principal Element Materials for Energy Storage (Final Report)

This DOE-EPSCoR project aimed to predict, synthesize, and characterize novel layered two-dimensional (2D) high-entropy materials (HEMs). These 2D-HEMs, composed of multiple principal elements in nearly equal concentrations, are distinct from traditional 2D materials (typically containing two or three elements) and conventional alloys (dominated by a single primary element with minor secondary additions). Their unique structural and compositional features enable significant lattice strain accommodation, resulting in enhanced electrode performance and potential applications in catalysis, hydrogen storage, sensing, quantum information technologies, and flexible electronics. The research focused on addressing four fundamental questions: (i) What combinations of elements can form stable and synthesizable 2D-HEMs? (ii) What mechanisms drive the stability and synthesizability of crystalline single-phase 2D-HEMs? (iii) How do local chemical disorder and defects influence the macroscopic electronic and mechanical properties? and (iv) What charge storage mechanisms are active in selectively synthesized 2D-HEMs for battery and supercapacitor electrode applications? To achieve these goals, the project employed an integrated theory-experiment approach, incorporating high-throughput first-principles calculations, theoretical modeling, data mining, experimental synthesis, and advanced characterization techniques. The advanced computing resources and state-of-the-art experimental characterization facilities at Oak Ridge National Laboratory (ORNL) were leveraged through collaboration. Beyond scientific advancements, the project contributed to workforce development. Two postdoctoral researchers and three graduate students at the University of Maine were trained through co-advising by ORNL scientists and collaborative interactions, strengthening their expertise in cutting-edge materials science.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Subnanometer Thick Native sp 2 Carbon on Oxidized Diamond Surfaces

Oxygen-terminated diamond has a wide breadth of applications, which include stabilizing near-surface color centers, semiconductor devices, and biological sensors. Despite the vast literature on characterizing functionalization groups on diamond, the chemical composition of the shallowest portion of the surface (<1 nm) is challenging to probe with conventional techniques like XPS and FTIR. In this work, we demonstrate the use of angleresolved XPS to probe the first ten nanometers of both oxygen and hydrogen terminated (100) single-crystalline diamond grown via chemical vapor deposition (CVD). With the use of consistent peakfitting methods, the peak identities and relative peak binding energies were identified for sp 2 carbon, ether, hydroxyl, carbonyl, and C−H groups for both of these diamond surface terminations. For the oxygen-terminated sample, we also quantified the thickness of the sp 2 carbon layer situated on top of the bulk sp 3 diamond bonded carbon to be 0.3 ± 0.1 nm, based on the analysis of the Auger electron spectra and D-parameter calculations. These results indicate that the majority of the oxygen is bonded to the sp 2 carbon layer on the diamond, and not directly to the sp 3 diamond bonded carbon.

Carbon↗
DOE OSTI2025

Evolution from topological Dirac metal to flat-band-induced antiferromagnet in layered K x Ni 4 S 2 (0 ≤ x ≤ 1)

Condensed matter systems with coexisting Dirac cones and flat bands and a switchable control between them within a single system are desirable but remarkably uncommon. Here, we report a layered quantum material system, K x Ni 4 S 2 (0 <= x <= 1), that simultaneously hosts both characteristics without involving typical Kagome/honeycomb lattices. Enabled by a topochemical K-deintercalation process, the Fermi surface can be fine-tuned continuously over a wide range of energies. Consequently, a non-magnetic Dirac-metal state with a topological nontrivial Z 2 index of 1;(000), supported by first-principles calculations and high mobility up to 1,471 cm 2 V -1 s -1 , is observed on the K-rich x = 1 side, whereas a flat-band-induced antiferromagnetic state with T N up to 10.1 K emerges as the K-content approaches 0. The K x Ni 4 S 2 system offers a versatile platform for exploring emerging phenomena and underscores aviable pathway for in situ control of quantum materials dominated by Dirac cones, flat bands, and their interplay.

dirac metal↗
DOE OSTI2024

Systems and methods for additive manufacturing magnetic solenoids

Systems and methods for forming a magnetically-enabled part via additive manufacturing. The method includes depositing a layer of additive manufacturing material on a build plate, melting or sintering the layer of additive manufacturing material, depositing additional layers of additive manufacturing material on previous layers of additive manufacturing material, the additive manufacturing material of at least some of the additional layers being magnetically permeable, and melting or sintering the additional layers of additive manufacturing material such that the magnetically-enabled part has a transition region including at least some of the magnetically permeable additive manufacturing material.

Hatch, Jonathan Douglas↗
DOE OSTI2024

Modularization of Ceramic Hollow Fiber Membrane Technology for Air Separation

This proposed project is aimed at studying high performance and economically competitive ceramic membrane technology for air separation and high-purity oxygen production using hollow fiber ceramic membrane stack and module technology. The design of the single permeate membrane is a hollow fiber substrate-supported thin tri-layer structure. Radially well-aligned micro-channels are embedded in the thick substrate and open at the inner surface of the substrate, enabling facile air/gas diffusion. The tri-layer structure of thin dense membrane layer (~ 10 µm) sandwiched by porous surface layer on either side is then built on the substrate using advanced fabrication process. The tri-layer structure design allows different materials to be used in different layers, where the materials of surface layers have high surface exchange coefficients while the material of dense layer has high bulk diffusivity. Such a synergetic combination leads to high permeation performance. The focus of the proposed project will be on membrane stack/module development using the developed single hollow fiber membranes, including: 1) fabrication and characterization of novel single hollow fiber membranes; 2) membrane stack design and assembly using fabricated single membranes; 3) stack modeling and analysis to guide membrane stack designs; 4) permeation performance testing and characterization of membrane stacks. The hollow fiber feature and simple sealing requirement enable very compact design of membrane stacks, which have excellent flexibility for further modularizations at different scales. The operations of such membrane stack and module may employ the exhaust heat from other components of Integrated Gasification Combined Cycle and oxy-combustion systems. Therefore, modularization of such an air separation membrane technology can be incorporated into the DOE’s REMS (radically engineered modular systems)-gasification skid and support the oxidant feed of an oxygen-blown REMS gasifier scaled to different ranges.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2024

Lattice and Local Electronic Structure Modulation Enables Ultra-Long-Life Li-Rich Cathode Materials

Effectively alleviating severe performance deterioration including rapid capacity decay and continuous voltage fading of Li-rich layered oxide (LLO) cathodes by suppressing the irreversible oxygen release and transition metal (TM) migration is a critical challenge during prolonged cycling. Herein, we report a Sb-doped LLO (SLLO) cathode with shortened TM oct –TM oct distance and modulated local electronic structure, which can significantly enhance the oxygen vacancy formation energy and TM migration energy barriers. Therefore, the SLLO cathode showcases an impressive energy density of 1052 Wh kg –1 at 0.2 C and an outstanding rate capability of 214 mAh g –1 at 5 C with a remarkable capacity retention of 79.2% even after 1000 cycles. It should be pointed out that it exhibits greatly enhanced voltage stability with an outstanding voltage retention of 86.2% after cycling 1600 times at 10 C. In conclusion, this work provides a prototype for significantly enhancing the reversibility in electrochemical reactions of high-capacity layered cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2025

UV-Enabled Defect Engineering in Multilayer GaSe and InSe and UV Writing of the Grating Pattern

III–VI post-transition-metal chalcogenides are layered semiconductor materials that exhibit direct band gaps in multilayers. Defect engineering is essential in 2D layered semiconductors for functional devices. Here, in this work, we report defect engineering in multilayer gallium selenide (GaSe) and indium selenide (InSe), where defects generated by ultraviolet (UV, 325 nm) laser irradiation result in an additional photoluminescence (PL) line. The additional PL line is due to defect-bound excitons. Characteristics of the defect emission are similar in GaSe and InSe samples subjected to UV irradiation, air annealing, and hydrostatic pressure. Two-beam UV interference was applied to create grating patterns with a periodic array of low and high densities of defects in GaSe. Density functional theory has identified the defect type in GaSe. The results provide valuable insights into defect generation and UV scribing of photonic circuits in 2D Se-based multilayers for optical integration in a 2D platform.

2D multilayered materials↗
DOE OSTI2025

Final Design for Thermal/Epithermal eXperiments (TEX) with Lithium Absorbers to Provide Validation Benchmarks for Y-12 Electrorefining Facility

One of the main goals of the Thermal/Epithermal eXperiments (TEX) project is to use existing Nuclear Criticality Safety Program (NCSP) assets to create critical experiment plutonium and uranium test beds for materials important to criticality safety that have insufficient benchmark evaluations. The plutonium test bed experiments were completed in 2018 and are published in the 2020 edition of the International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook. The uranium test bed assemblies were completed in 2023 and accepted in the 2024 edition of the ICSBEP Handbook. The Nuclear Criticality Safety (NCS) group at Y-12 National Security Complex has identified programmatic need for validation cases for uranium electrorefining operations at Y-12. The electrorefining operation credits lithium enriched in 6 Li in addition to 35 Cl as absorbers in the design criticality safety evaluation for precluding criticality under upset conditions in the large and geometrically unfavorable electro-refiner. There is, however, inadequate experimental validation for the 6 Li absorbers. As an extension of the TEX uranium test bed, TEX-Cl critical experiments were performed with sodium chloride salt to address the 35 Cl thermal absorption as well as other validation needs at Los Alamos National Laboratory (LANL). These experiments were completed in 2024 and accepted into the 2025 ICSBEP Handbook. To continue the methodology used in TEX-Cl, TEX-Li aims to accomplish the same. The overall design of both experiments was to use commercially available, high purity, salts with polyethylene moderator and HEU plates to configure a critical assembly. Three experiments are planned for TEX-Li using encapsulated lithium carbonate (Li 2 CO 3 ), with natural 6 Li abundance. For all experiments, the highly enriched uranium (HEU) Jemima plates will be used as fissile material. Multiple layers will be stacked together with encapsulated Li 2 CO 3 alternated with polyethylene in standard configurations. Standard stacking was found to be optimal in matching the different sensitivity profiles provided by the Y-12 models. Three configurations are proposed with varying polyethylene moderation and a constant 1/4” absorber thickness. The first uses 11 layers of 5/4” polyethylene, the second uses 9 layers of 3/4” polyethylene, and the third uses 10 layers of 1/2” polyethylene. Calculations showed that some alternative forms of lithium-based materials provided slightly less-optimal sensitivity profiles when compared to lithium carbonate but come with other drawbacks. These alternatives included lithium aluminate (LiAlO 2 ), Aluminum-2050 alloy, Aluminum-8090, Aluminum-2095, lithium hydride (LiH), and lithium fluoride (LiF). Lithium aluminate and aluminum-2050 provided comparable sensitivity profiles when compared to lithium carbonate and can be used instead if lithium carbonate cannot be readily procured. After a broad material study, lithium carbonate outperformed any alternative material with a balance in affordability and workability. The assessment of experimental uncertainties of the non-absorber and absorber components was predicted to be 0.00089 and 0.00093 Δk eff , respectively. The largest uncertainties may be reduced with precision dimensional inspection of the components. Many of the parts and equipment for IER 575 have already been fabricated or procured for previous projects and therefore do not contribute significantly to the overall cost of this experiment. This includes the Jemima plates and Comet critical assembly machine, which are existing NCSP assets, as well as the aluminum platen and polyethylene reflector rings, which were fabricated and authorized for the TEX experiment involving HEU with polyethylene. Lithium carbonate containers will be procured by LANL and will be filled by LLNL. The total material costs for TEX-Li experiments are estimated to be on the order of $\$$47,400. Precision inspection, including dimensional, mass, density, and impurity, is recommended for all components for an estimated cost of $\$$12,000.

35Cl↗
DOE OSTI2024

Scale-Up of Lithium Iron & Aluminum Nickelate Advanced Cathode and Fabrication of A Battery Pack Comprising The Same

Global battery manufacturers are increasingly worried about the serious supply chain constraint caused by rapid fluctuations in cobalt prices over the years. We present a novel cobalt-free, nickel-rich layered cathode material called NFA class (LiNixFeyAlzO2) to tackle this challenge. Spherical NFA(OH)2 precursors were successfully synthesized by incorporating Ni, Fe, and Al elements using a co-precipitation reaction in a continuous stirred tank reactor. The LiNFAO2 cathode, composed of LiNi0.85Fe0.05Al0.1O2, was synthesized and analyzed using X-Ray diffraction, Mössbauer spectroscopy, and scanning electron microscopy (SEM). The material's electrochemical behavior was evaluated through various techniques at different lithiation/delithiation states in two voltage ranges. The cobalt-free material exhibits a high capacity of 190 mAh/g at 0.1C within the voltage range of 3V-4.5V, as demonstrated by electrochemical performance evaluations. Rate and cycling evaluations showed good rate capability and cycling stability, with 88% capacity retention after 100 cycles at C/3 within the voltage range of 3V-4.3V. Our research shows the great potential of cobalt-free NFA cathodes as a feasible option for developing cost-effective lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Revealing the Hidden Third Dimension of Point Defects in Two-Dimensional MXenes

Point defects govern many important functional properties of two-dimensional (2D) materials. However, resolving the three-dimensional (3D) arrangement of these defects in multi-layer 2D materials remains a fundamental challenge, hindering rational defect engineering. Here, we overcome this limitation using an artificial intelligence-guided electron microscopy workflow to map the 3D topology and clustering of atomic vacancies in Ti3C2TX MXene. Our approach reconstructs the 3D coordinates of vacancies across hundreds of thousands of lattice sites, generating robust statistical insight into their distribution that can be correlated with specific synthesis pathways. This large-scale data enables us to classify a hierarchy of defect structures-from isolated vacancies to nanopores-revealing their preferred formation and interaction mechanisms, as corroborated by molecular dynamics simulations. This work provides a generalizable framework for understanding and ultimately controlling point defects across large volumes, paving the way for the rational design of defect-engineered functional 2D materials.

2D materials↗