Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Laterality”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Feasibility of Algal Biochar, a Byproduct of Biofuel Production, as a Supplemental Cementitious Material

Algal biochar, as the solid residue of biofuel production from algal biomass, is reported to explore disposition options, aiming to lessen the liability or obstacles to biofuel production processes. However, landfills and open combustion lead to adverse environmental impacts. One way to add value to such wastes is to use them as admixtures in cementitious construction materials. This study aims to investigate the feasibility of algae-derived biochar as supplementary cementitious materials (SCM) at different water contents and mixture ratios. Algal biochar-cement composites were prepared with different algal biochar content as well as different water-to-cement (w/c) ratios, and the surface area, morphology, elemental, and mineralogical composition were characterized. To compensate for the high-water absorption of algal biochar, a small concentration of a superplasticizer was used since higher w/c ratios negatively impact strength. The mechanical performance of algal biochar-cement composites is compared with control composites using commercial silica fume as a typical commercial SCM. The findings suggest that algal biochar is a promising candidate to replace commercial SCM, like silica fume, since algal biochar-cement composites can reach comparable compressive strength and Young’s modulus to commercial pozzolan-cement materials with the same w/c ratio, though at later curing times, 33 days. Although the tensile strength of algal biochar-cement composites is statistically similar at 7 days, it is significantly lower at later curing times, and further investigation is required to improve this property. Algal biochar-based cement binders showed comparable embodied carbon to silica fume-based cement binders based on a cradle-to-gate lifecycle analysis. However, the ability of algal biochar to absorb large volumes of CO 2 over short periods of time, as measured in this study, makes this novel SCM an excellent alternative to reduce the embodied carbon of concrete structures cradle-to-grave at 1/10 of the cost. In conclusion, valorization of algae-derived solid waste provides great potential to reduce embodied carbon and brings credit to biofuel production and concrete-based construction.

algae-derived↗

Impacts of Sea‐Level Rise on Coastal Groundwater Table Simulated by an Earth System Model With a Land‐Ocean Coupling Scheme

Abstract Sea‐level rise (SLR) poses a severe threat to the coastal environment through seawater intrusion into freshwater aquifers. The rising groundwater table also exacerbates the risk of pluvial, fluvial, and groundwater flooding in coastal regions. However, current Earth system models (ESMs) commonly ignore the exchanges of water at the land‐ocean interface. To address this gap, we developed a novel land‐ocean hydrologic coupling scheme in a state‐of‐the‐science ESM, the Energy Exascale Earth System Model version 2 (E3SMv2). The new scheme includes the lateral exchange between seawater and groundwater and the vertical infiltration of seawater driven by the SLR‐induced inundation. Simulations were performed with the updated E3SMv2 for the global land‐ocean interface to assess the impacts of SLR on coastal groundwater under a high CO 2 emission scenario. By the middle of this century, seawater infiltration on the inundated areas will be the dominant component in the land‐ocean coupling process, while the lateral subsurface flow exchange will be much smaller. The SLR‐induced seawater infiltration will raise the groundwater levels, enhance evapotranspiration, and increase runoff with distinct spatial patterns globally in the future. Although the coupling process is induced by SLR, we found topography and warming temperature have more control on the coupling impacts, probably due to the relatively modest magnitude of SLR during the selected future period. Overall, our study suggests significant groundwater and seawater exchange at the land‐ocean interface, which needs to be considered in ESMs.

54 ENVIRONMENTAL SCIENCES↗

The Influence of African Easterly Waves on Atlantic Tropical Cyclone Tracks and Landfall in Large Ensembles

African easterly waves (AEWs) are an important precursor or “seed” for Atlantic tropical cyclones (TCs), with 60%–80% of major hurricanes observed to originate from AEWs. However, climate model simulations indicate that AEWs are not necessary to maintain annual Atlantic TC frequency. Furthermore, small ensembles suggest that AEWs may impact the spatial distribution and landfall of Atlantic TCs. Here, we investigated the influence of AEWs on the spatial distribution of Atlantic TC tracks and landfall using 50-member ensembles of TC-permitting regional model simulations for five hurricane seasons characterized by different levels of TC activity. The control simulations are seasonal hindcasts in which AEWs were prescribed through the eastern lateral boundary condition using reanalysis. In the experiments, we suppressed AEWs by applying a 2–10 day filter to the eastern lateral boundary condition. In response to AEW suppression, we discovered statistically significant increases in Atlantic TC frequency (10%–26%) and landfall (16%–44%), a westward shift in TC genesis location and tracks with increased landfall over the Caribbean Islands, southwestern Gulf Coast, and southeastern US coast, and increases in mid-tropospheric relative humidity in the main development region. In addition, we evaluated TC genesis mechanisms in the absence of AEWs and found evidence that the intertropical convergence zone (ITCZ) intensified and extended northward, resulting in ITCZ wave-breaking that shed vortices which served as TC seeds. By uncovering the connections between TC seed types and the likelihood of TC landfall, this research can provide Atlantic coastal and island communities with useful information to prepare for TC impacts.

African easterly waves↗

Amapari Marker Band Metal‐Enrichments: Potential Mechanisms and Implications for Surface and Subsurface Water and Weathering in Gale Crater

NASA's Curiosity rover is exploring a 5 km tall sedimentary mound that is hypothesized to record the transition from a warm and wet (phyllosilicate-rich) to a cold and drier (sulfate-rich) Mars. Evidence of magnesium sulfate-bearing rock has shown that Curiosity has crossed through this phyllosilicate-sulfate transition. Recently, Curiosity arrived at the Amapari Marker Band, a darker, indurated unit that can be traced laterally for tens of kilometers in orbiter images. Here, Curiosity found evidence for a very broad lake, and bedforms interpreted as wave-ripple laminated sedimentary rock that likely was deposited in shallow water in the explored location, before becoming a deeper lake. These rocks are enriched in Fe, Mn, and Zn which has major implications for groundwater paleohydrology in Gale crater. Three formation hypotheses are considered: concretion formation during early diagenetic alteration of shallow lake sediments, laterization or leaching of the sediments, and addition of Fe, Mn, and Zn by a mildly acidic and reducing groundwater interacting with a redox and/or pH front in a stratified lake. The preferred interpretation of the metal enrichments within the Amapari Marker band sedimentary rocks is that they formed in a shallow water environment at a redox and/or pH front within the ripple unit, which drove precipitation and concentration of metals. If the enrichments are due to groundwater alteration, these processes could link subsurface and surface environments. Water and the presence of high amounts of redox sensitive elements and other metals are favorable indicators for habitability.

58 GEOSCIENCES↗

Confinement of excited states in two-dimensional, in-plane, quantum heterostructures

Two-dimensional (2D) semiconductors are promising candidates for optoelectronic application and quantum information processes due to their inherent out-of-plane 2D confinement. In addition, they offer the possibility of achieving low-dimensional in-plane exciton confinement, similar to zero-dimensional quantum dots, with intriguing optical and electronic properties via strain or composition engineering. However, realizing such laterally confined 2D monolayers and systematically controlling size-dependent optical properties remain significant challenges. Here, we report the observation of lateral confinement of excitons in epitaxially grown in-plane MoSe 2 quantum dots (~15-60 nm wide) inside a continuous matrix of WSe 2 monolayer film via a sequential epitaxial growth process. Various optical spectroscopy techniques reveal the size-dependent exciton confinement in the MoSe 2 monolayer quantum dots with exciton blue shift (12-40 meV) at a low temperature as compared to continuous monolayer MoSe 2 . Finally, single-photon emission (g 2 (0) ~ 0.4) was also observed from the smallest dots at 1.6 K. Our study opens the door to compositionally engineered, tunable, in-plane quantum light sources in 2D semiconductors.

42 ENGINEERING↗

Adaptive stretching of representations across brain regions and deep learning model layers

Prefrontal cortex (PFC) is known to modulate the visual system to favor goal-relevant information by accentuating task-relevant stimulus dimensions. Does the brain broadly re-configures itself to optimize performance by stretching visual representations along task-relevant dimensions? We considered a task that required monkeys to selectively attend on a trial-by-trial basis to one of two dimensions (color or motion direction) to make a decision. Although effects were most prominent in frontal areas, representations stretched along task-relevant dimensions in all sites considered: V4, MT, lateral PFC, frontal eye fields (FEF), lateral intraparietal cortex (LIP), and inferotemporal cortex (IT). Spike timing was crucial to this code. A deep learning model was trained on the same visual input and rewards as the monkeys. Despite lacking an explicit selective attention or other control mechanism, by minimizing error during learning, the model’s representations stretched along task-relevant dimensions, indicating that stretching is an adaptive strategy.

59 BASIC BIOLOGICAL SCIENCES↗

A real-time search for Type Ia Supernovae with late-time interactions with circumstellar material in ZTF data

While it is generally accepted that Type Ia supernovae (SNe Ia) are the terminal explosions of white dwarfs (WDs), the nature of their progenitor systems and the mechanisms that lead up to these explosions remain widely debated. In rare cases, the SN ejecta interact with circumstellar material (CSM) that had previously been ejected from the progenitor system. The longer the delay between the creation of the CSM and the SN explosion, the greater the distance between the SN explosion site and the CSM and the later the onset of the interaction. The unknown distance between the CSM and SN explosion site makes it impossible to predict when the interaction will start. If the time between the SN explosion and the onset of the CSM interaction is of the order of several months to years, the SN has generally faded and it is no longer actively followed up on. This makes it even more difficult to detect the interaction while it is happening. In this work, we report on a real-time monitoring programme running between 13 November 2023 and 9 July 2024. It monitored 6914 SNe Ia for signs of late-time rebrightening using the Zwicky Transient Facility (ZTF). Flagged candidates were rapidly followed up on with photometry and spectroscopy to confirm the late-time excess and its position. We report the discovery of a ∼50 day rebrightening event in SN 2020qxz around 1200 rest-frame days after the peak of its light curve. SN 2020qxz exhibited signs of an early CSM interaction, but had faded from view over two years before its reappearance. Initial follow-up spectroscopy revealed the presence of four emission lines, while later follow-up spectroscopy showed that these had faded shortly after the end of the ZTF-detected rebrightening event. Our best match for these emission lines are H β (blueshifted by ∼5900 km s −1 ) and Ca II λ8542 , N I λ8567 , and K I λλ8763, 8767 (all blueshifted by 5100 km s −1 ; although we note that the line identifications are uncertain). This shows that catching and following up on late-time interactions as they occur can offer new clues on the nature of the progenitor systems that produce these SNe by putting constraints on the possible type of donor star. The only way to do this systematically is to use large sky surveys such as ZTF and the upcoming Vera C. Rubin Observatory’s Legacy Survey of Space and Time (LSST) to monitor a large sample of objects for the rare events that reappear long after the object has faded from view.

circumstellar matter↗

Dislocation half-loop control for optimal V-defect density in GaN-based light emitting diodes

V-defects are morphological defects that typically form on threading dislocations during epitaxial growth of $(0001)$-oriented GaN layers. A V-defect is a hexagonal pyramid-shaped depression with six {$10\bar{1}1$}-oriented sidewalls. These semipolar sidewalls have a lower polarization barrier than the polarization barriers present between the polar c-plane quantum wells and quantum barriers and can laterally inject carriers directly into quantum wells in GaN-based light emitting diodes (LEDs). This is especially important, as the high polarization field in c-plane GaN is a significant factor in the high forward voltage of GaN LEDs. The optimal V-defect density for efficient lateral carrier injection in a GaN LED (∼10 9 cm −2 ) is typically an order of magnitude higher than the threading dislocation density of GaN grown on patterned sapphire substrates (∼10 8 cm −2 ). Pure-edge dislocation loops have been known to exist in GaN, and their formation into large V-defects via low-temperature growth with high Si-doping has recently been studied. Here, in this work, we develop a method for pure-edge threading dislocation half-loop formation and density control via disilane flow, growth temperature, and thickness of the half-loop generation layer. We also develop a method of forming the threading dislocation half-loops into V-defects of comparable size to those originating from substrate threading dislocations.

Crystallographic defects↗

Light scattering by V 4 O 7 film across the metal–insulator transition

The experimental study of the angle-resolved hemispherical light scattering by V 4 O 7 film within a broad temperature range across metal–insulator transition reveals complex structural reorganization of the film deposited on the c-cut sapphire crystal. The bidirectional scattering distribution function and the surface autocorrelation function were obtained from scattering data to visualize statistics of the spatially resolved contributions of optical inhomogeneities in normal and lateral directions to the surface. The measurements reveal an anisotropic surface roughness distribution due to the twinned domain structure, with significant anisotropy changes across the phase transition. The V 4 O 7 film deposited on sapphire leads to a polydomain structure, minimizing elastic strain energy with distinct multiscale distributions of surface domains. Near T c , the material shows the lowest roughness but the highest lateral disorder of the surface.

36 MATERIALS SCIENCE↗

Properties of V-defect injectors in long wavelength GaN LEDs studied by near-field electro- and photoluminescence

The efficiency of multiple quantum well (QW) light emitting diodes (LEDs) to a large degree depends on uniformity of hole distribution between the QWs. Typically, transport between the QWs takes place via carrier capture into and thermionic emission out of the QWs. In InGaN/GaN QWs, the thermionic hole transport is hindered by the high quantum confinement and polarization barriers. To overcome this drawback, hole injection through semipolar QWs located at sidewalls of V-defects had been proposed. However, in the case of the V-defect injection, strong lateral emission variations take place. In this work, we explore the nature of these variations and the impact of the V-defects on the emission spectra and carrier dynamics. The study was performed by mapping electroluminescence (EL) and photoluminescence (PL) with a scanning near-field optical microscope in LEDs that contain a deeper well that can only be populated by holes through the V-defects. Applying different excitation schemes (electrical injection and optical excitation in the far- and near-field), we have shown that the EL intensity variations are caused by the lateral nonuniformity of the hole injection. We have also found that, in biased structures, the PL intensity and decay time in the V-defect regions are only moderately lower that in the V-defect-free regions thus showing no evidence of an efficient Shockley-–Read–Hall recombination. In the V-defect regions, the emission spectra experience a red shift and increased broadening, which suggests an increase of the In content and well width in the polar QWs close to the V-defects.

Electroluminescence↗

Inter-ELM pedestal turbulence dynamics dependence on q 95 and temperature gradient

A series of dedicated experiments from DIII-D tokamak provide spatially and temporally resolved measurements of electron density and temperature, and multiscale and multichannel fluctuations over a wide range of conditions. Measurements of long wavelength density fluctuations in the type-I ELMing H-mode pedestal routinely revealed a coexistence of multiple instabilities that exhibit dramatic different dynamic behaviors as q 95 and temperature gradient are varied, apparently responsible for limiting pedestal temperature profiles. Two distinct frequency bands of density fluctuations are modulated with ELM cycle with frequency above 200kHz propagating in the electron diamagnetic direction in the lab frame (electron mode) and below 200kHz propagating in the ion diamagnetic direction (ion mode). The electron mode amplitude peaks near the electron temperature gradient region and increases with q 95 which seems to be correlated with the increased χ e at higher q 95 , similar to the characteristics expected for Micro-tearing Mode (MTM). At higher q 95 , during the inter-ELM period, the ion mode decays at later phase of the ELM cycle. Consistently, the poloidal correlation length of the ion mode is also found to reduce which suggests the possible E×B flow shear suppression of ion mode at later phase of the ELM cycle as the Er well recovers. In contrast, the electron mode grows during the ELM cycle and reaches saturation at around 50-60% of ELM period. Linear gyrokinetic simulations find the MTMs as the most unstable mode in the pedestal electron temperature gradient region. The higher q 95 and lower magnetic shear destabilize MTMs. These observations provide key insights of the underlying physics of multifield properties and rich dataset of experimental 'fingerprints' that enable new tests of the theoretical pedestal models and lead to developing a predictive model for pedestal formation on ITER and future burning plasma experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multi-slice electron ptychographic tomography for three-dimensional phase-contrast microscopy beyond the depth of focus limits

Electron ptychography is a powerful computational method for atomic-resolution imaging with high contrast for weakly and strongly scattering elements. Modern algorithms coupled with fast and efficient detectors allow imaging specimens with tens of nanometers thicknesses with sub-0.5 Ångstrom lateral resolution. However, the axial resolution in these approaches is currently limited to a few nanometers, limiting their ability to solve novel atomic structures ab initio. Here, we experimentally demonstrate multi-slice ptychographic electron tomography, which allows atomic resolution three-dimensional phase-contrast imaging in a volume surpassing the depth of field limits. We reconstruct tilt-series 4D-STEM measurements of a $\mathrm{Co_3O_4}$ nanocube, yielding 2 Å axial and 0.7 Å transverse resolution in a reconstructed volume of $\mathrm{(18.2\,nm)^3}$. Our results demonstrate a 13.5-fold improvement in axial resolution compared to multi-slice ptychography while retaining the atomic lateral resolution and the capability to image volumes beyond the depth of field limit. Multi-slice ptychographic electron tomography significantly expands the volume of materials accessible using high-resolution electron microscopy. We discuss further experimental and algorithmic improvements necessary to also resolve single weakly scattering atoms in 3D.

36 MATERIALS SCIENCE↗

What are grana in chloroplasts of vascular plants good for?

All plants and green algae contain stacked grana thylakoid membranes in their chloroplasts, underscoring an evolutionary pressure to maintain this unique structural feature. In addition, numerous studies have demonstrated that particular lateral and vertical dimensions of grana facilitate the function, regulation and repair of the photosynthetic machinery responsible for energy conversion. In this review, we present an updated overview of our understanding concerning the structure of grana thylakoids, the forces that contribute to their formation and their architectural dynamics. After establishing the structural foundation, we continue by reviewing the implications of grana formation on light harvesting, electron transport and protein maintenance in the thylakoid membranes of vascular plants. Regarding light harvesting, we discuss the implications of grana formation on energy spillover, macromolecular crowding, lateral versus vertical excitation energy transfer, and state transition. With respect to electron transport, we summarize recent findings regarding the functional connectivity of spatially separated photosystems facilitated by grana formation through small mobile electron carriers. We also explore how the dynamic responses of grana architecture regulate electron transport. Finally, we address how grana formation contributes to the organization of protein repair and biogenesis within thylakoid membranes.

59 BASIC BIOLOGICAL SCIENCES↗

Acoustic waves from the 2023 April 20 SpaceX Starship rocket explosion travelling in the elevated ‘AtmoSOFAR’ channel

SUMMARY The ability to detect low-frequency sounds from distant energetic events depends on the temperature and wind structure of the atmosphere. Thus, from time to time surface-based acoustic detectors may not be able to capture sounds arriving from certain directions. However, the temperature minimum at the tropopause may create an acoustic duct called the ‘AtmoSOFAR’ channel that could transmit acoustic waves laterally—but perhaps not to the ground. If true, then elevated sensors such as those borne aloft by balloons would record the signatures even in regions where ground-based sensors cannot. This has been difficult to prove because high altitude acoustic sources are rare and balloon deployments are sporadic. This work describes the detection and characterization of powerful acoustic waves generated during the launch and terminal explosion of the SpaceX Starship rocket on 2023 April 20 using a pair of microbarometers on a stratospheric balloon. The signals travelled through the AtmoSOFAR channel, carrying information about the size and nature of their source. This channel also appears to leak some acoustic energy to the ground, in agreement with previous studies. The acoustic yield of the Starship terminal explosion was on the order of $10^3$ tons trinitrotoluene equivalent, which agrees with the estimated fuel load of the vehicle to about a factor of 2, but is two orders of magnitude larger than optical estimates. These results support an earlier study that claimed lateral transmission of sound from a smaller rocket through the AtmoSOFAR channel. The transmission of source information through the AtmoSOFAR channel motivates its use for monitoring other natural and anthropogenic events using balloon-borne sensors. This may become increasingly important as more and more private and government entities conduct spacecraft launches and reentries. It may also provide a means of monitoring clear air turbulence and other sound-generating atmospheric phenomena at a distance.

58 GEOSCIENCES↗

Space-Charge-Limited van der Waals Spin Transistor

Integrating semiconducting and magnetic materials could combine transistorlike operation with nonvolatility and enable architectures such as logic in memory. Here, in this work, we employ correlated electrical transport and scanning nitrogen-vacancy center magnetic imaging to elucidate a spin transistor concept that amalgamates vertical and lateral hopping transport inside a 2D antiferromagnetic semiconductor, mechanistically distinct from vertical tunneling devices. Our device, based on a monolayer-bilayer junction in CrSBr, displays giant, gate-tunable magnetoresistance driven by the dual action of electrostatic doping on space-charge-limited lateral conduction and interlayer exchange coupling. Moreover, we visualize a field-trainable, layer-sharing effect that selects between coherent or domain-wall reversal at the spin-flip transition, enabling multilevel, memristive conductance states. Our layer-dependent space charge mechanism for convergent electrical and magnetic control opens opportunities to address limitations in contemporary computing.

2-dimensional systems↗

Interpretable Models for Workflow Differentiation in High-Performance Scientific Networks

Scientific workflows in high-performance networks spawn hundreds of interdependent flows that must be managed collectively—yet existing network classifiers treat each flow in isolation, leading to fragmented QoS decisions and missed interflow patterns. We present a novel traffic classification solution that operates at the workflow level, distinguishing entire filetransfer operations from streaming analytics by capturing how concurrent flows interact and burst together. We introduce a workflow identification window (WIW) that ingests raw packet headers from parallel flows into unified tensors, preserving the spatial-temporal patterns that differentiate scientific workflows. This approach achieves 98.7% accuracy using CNN, LSTM, and hybrid architectures, while maintaining 84% accuracy on production traffic collected a week later—demonstrating robustness to temporal drift. By integrating SHAP and GradCAM explainability, we reveal that early-packet timing patterns and cross-flow correlations drive classification decisions, providing operators with interpretable insights. Our system enables coherent workflow-level QoS enforcement and dynamic bandwidth allocation in scientific networks, eliminating manual per-flow configuration while maintaining classification latency at millisecond level.

Giannakou, Anna [LBL, Berkeley]↗

Quantum/AI Topology-Aware Latency-Adaptive HPC Workflow Scheduling Optimization

The growing demand for more powerful high-performance computing (HPC) systems has led to a steady rise in energy consumption by supercomputing worldwide. This study is focused on comparing our Application-Topology Mapper (ATMapper) to the popular Simple Linux Utility for Resource Management (SLURM) for the purpose of exploring methods that can further optimize job-scheduling within HPC systems. ATMapper is an Artificial-Intelligence based approach to job-scheduling that is currently being enhanced with quantum annealing (QA) to generate optimal schedules faster. We are applying QA to speedup our ATMapper process to achieve higher computing efficiency, thereby reducing HPC energy consumption. Here, we examine how four job-scheduling approaches perform in processor node assignment when using an example network architecture of 4 interconnected nodes. Using a specialized script, we are assessing the schedule of a computation flow with 11 interdependent tasks. The data movements among nodes were tracked to count for the number of interactions (network hops) between nodes needed to complete the tasks. The total number of hops and the job completion time were then used to quantify the efficiency of the different mapping approaches. In addition to SLURM, we also compare our ATMapper to the QA-enabled LBNL TIGER and the D-Wave Distributed Computing processor assignment approaches. The preliminary results showed that our topology-aware, latency-adaptive ATMapper is significantly more efficient when compared to the other scheduling approaches due to its load-imbalance network allocation. The scheduler displayed a computing efficiency of 53% by performing significantly fewer network hops than its alternatives. By reducing the number of hops, ATMapper was able to perform all 11 tasks by using only 3 nodes out of given 4. This research indicates the potential to use QA/AI for HPC job-scheduling. Later, we will test a SLURM simulator program to draw further comparisons on the effectiveness of ATMapper's scheduling approach. The results of this comparison will serve as a baseline for later improving SLURM's performance using a QA-enhanced ATMapper approach.

Caraveo, Braulio [University of Huston - Clear Lak↗

Tundra Vegetation Community Type, Not Microclimate, Controls Asynchrony of Above‐ and Below‐Ground Phenology

The below-ground growing season often extends beyond the above-ground growing season in tundra ecosystems and as the climate warms, shifts in growing seasons are expected. However, we do not yet know to what extent, when and where asynchrony in above- and below-ground phenology occurs and whether variation is driven by local vegetation communities or spatial variation in microclimate. Here, we combined above- and below-ground plant phenology metrics to compare the relative timings and magnitudes of leaf and fine-root growth and senescence across microclimates and plant communities at five sites across the Arctic and alpine tundra biome. We observed asynchronous growth between above- and below-ground plant tissue, with the below-ground season extending up to 74% (~56 days) beyond the onset of above-ground leaf senescence. Plant community type, rather than microclimate, was a key factor controlling the timing, productivity, and growth rates of fine roots, with graminoid roots exhibiting a distinct ‘pulse’ of growth later into the growing season than shrub roots. Our findings indicate the potential of vegetation change to influence below-ground carbon storage as the climate warms and roots remain active in unfrozen soils for longer. Taken together, our findings of increased root growth in soils that remain thawed later into the growing season, in combination with ongoing tundra vegetation change including increased shrub and graminoid abundance, indicate increased below-ground productivity and altered carbon cycling in the tundra biome.

below-ground↗