SEARCH · Engineering Papers
Results for “LEVELS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The energy level alignment at metal–molecule interfaces using Wannier–Koopmans method
We apply a recently developed Wannier-Koopmans method (WKM), based on density functional theory (DFT), to calculate the electronic energy level alignment at an interface between a molecule and metal substrate. We consider two systems: benzenediamine on Au (111), and a bipyridine-Au molecular junction. The WKM calculated level alignment agrees well with the experimental measurements where available, as well as previous GW and DFT + Σ results. These results suggest that the WKM is a general approach that can be used to correct DFT eigenvalue errors, not only in bulk semiconductors and isolated molecules, but also in hybrid interfaces.
Influence of the vg{sub 9/2} orbital on level structures of neutron-rich {sup 61,62} Mn{sub 36,37}.
Level structures in {sup 61,62}Mn{sub 36,37} were studied with Gammasphere in the reaction of a 430-MeV {sup 64}Ni beam and a thick {sup 238}U target. The newly identified levels decrease in excitation energy compared to the analogous structures in the lighter Mn isotopes and behave similarly to states in the corresponding Fe isotones that involve g{sub 9/2} neutron excitations. This behavior illustrates the importance of the inclusion of the ?g{sub 9/2} orbital in any realistic shell-model calculations in this region.
Low Level and Transuranic Waste Segregation and Low Level Waste Characterization at the 200 Area of the Hanford Site - 12424
This paper describes the waste measurement and waste characterization activities carried out by ANTECH Corporation (ANTECH) and CH2M Hill Plateau Remediation Company (CHPRC) at the 200 Area of the Hanford Site under Contracts No. 22394 and No. 40245 for the US Department of Energy (DOE). These include Low Level Waste (LLW) and Transuranic (TRU) Waste segregation and LLW characterization for both 55-gallon (200-litre) drums with gross weight up to 454 kg and 85-gallon over-pack drums. In order to achieve efficient and effective waste drum segregation and assay, ANTECH deployed an automated Gamma Mobile Assay Laboratory (G-MAL) at the trench face in both 200 Area West and East. The unit consists of a modified 40 foot ISO shipping container with an automatic flow through roller conveyor system with internal drum weigh scale, four measurement and drum rotation positions, and four high efficiency high purity Germanium (HPGe) detectors with both detector and shadow shields. The unit performs multiple far-field measurements and is able to segregate drums at levels well below 100 nCi/g. The system is sufficiently sensitive that drums, which are classified as LLW, are characterized at measurement levels that meet the Environmental Restoration Disposal Facility (ERDF) Waste Acceptance Criteria (WAC). With measurement times of between 20 and 30 minutes the unit can classify and characterize over 40 drums in an 8-hour shift. The system is well characterized with documented calibrations, lower limits of detection (LLD) and total measurement uncertainty. The calibrations are confirmed and verified using nationally traceable standards in keeping with the CHPRC measurement requirements. The performance of the system has been confirmed and validated throughout the measurement process by independent CHPRC personnel using traceable standards. All of the measurement and maintenance work has been conducted during the period under a Quality Assurance Plan (QAP) compliant with the applicable criteria of NQA-1 (2000). This includes not only the calibrations and measurements but also the data analysis activities of the ANTECH Subject Matter Experts (SME) and ANTECH support and maintenance activities as well as the activities of CHPRC staff who recover, transport and load waste drums and disposition measured and characterized drums. The overall processes of drum recovery and analysis are described in the paper. Specific spectral data is presented which illustrates the segregation, sentencing and assay process for different types of drums with different radionuclide profiles. The process of identifying and quantifying a wide range of non-TRU radionuclide isotopes is explained and illustrated with spectral examples. The difficulties associated with the measurement of drums with a high gamma ray background, usually arising from high levels of Cs-137 are considered. These drums, which would normally be declared indeterminate and treated as TRU, are addressed under contract No. 40245 by the deployment of the ANTECH Neutron Mobile Assay Laboratory. This is an Active-Passive neutron assay system housed in a modified ISO shipping container. The unit is designed for the measurement and assay of both drums and crates (including B-25 boxes and SWB containers) and will quantify the content of both plutonium and uranium. The neutron system has been employed to perform further evaluation on indeterminate drums to classify them to either LLW or TRU. The experiences of both gamma ray and neutron system operation in different conditions are described; as are the issues of throughput, drum handling and system maintenance. All of these are considered in the overriding context of safe drum handling and safe assay system operation. (authors)
Weak Electron Phonon Coupling and Deep Level Impurity for High Thermoelectric Performance Pb 1–x Ga x Te
High ZT of 1.34 at 766 K and a record high average ZT above 1 in the temperature range of 300-864 K are attained in n-type PbTe by engineering the temperature-dependent carrier concentration and weakening electron–phonon coupling upon Ga doping. The experimental studies and first principles band structure calculations show that doping with Ga introduces a shallow level impurity contributing extrinsic carriers and imparts a deeper impurity level that ionizes at higher temperatures. This adjusts the carrier concentration closer to the temperature-dependent optimum and thus maximizes the power factor in a wide temperature range. The maximum power factor of 35 μW cm -1 K -2 is achieved for the Pb 0.98 Ga 0.02 Te compound, and is maintained over 20 μWcm-1 K-2 from 300 to 767 K. Band structure calculations and X-ray photoelectron spectroscopy corroborate the amphoteric role of Ga in PbTe as the origin of shallow and deep levels. Additionally, Ga doping weakens the electron–phonon coupling, leading to high carrier mobilities in excess of 1200 cm 2 V -1 s -1 . Enhanced point defect phonon scattering yields a reduced lattice thermal conductivity. Here, we provide a new avenue, beyond the conventional shallow level doping, for further improving the average ZT in thermoelectric materials.
Development of a Low-Level Ar-37 Calibration Standard
Argon-37 is an important environmental signature of an underground nuclear explosion. Producing and quantifying low-level 37Ar standards is an important step in the development of sensitive field measurement instruments for use during an On-Site Inspection, a key provision of the Comprehensive Nuclear-Test-Ban Treaty. This paper describes progress at Pacific Northwest National Laboratory (PNNL) in the development of a process to generate and quantify low-level 37Ar standard material, which can then be used to calibrate sensitive field systems at activities consistent with soil background levels. The 37Ar used for our work was generated using a laboratory-scale, high-energy neutron source to irradiate powdered samples of calcium carbonate. Small aliquots of 37Ar were then extracted from the head space of the irradiated samples. The specific activity of the head space samples, mixed with P10 (90% stable argon:10% methane by mole fraction) count gas, is then derived using the accepted Length-Compensated Internal-Source Proportional Counting method. Due to the low activity of the samples, a set of three Ultra-Low Background Proportional-Counters designed and fabricated at PNNL from radio-pure electroformed copper was used to make the measurements in PNNL’s shallow underground counting laboratory. Very low background levels (<10 counts/day) have been observed in the spectral region near the 37Ar emission feature at 2.8 keV. Two separate samples from the same irradiation were measured. The first sample was counted for 12 days beginning 28 days after irradiation, the second sample was counted for 24 days beginning 70 days after irradiation (the half-life of 37Ar is 35.0 days). Both sets of measurements were analyzed and yielded very similar results for the starting activity (~0.1 Bq) and activity concentration (0.15 mBq/ccSTP argon) after P10 count gas was added. A detailed uncertainty model was developed based on the ISO Guide to the Expression of Uncertainty in Measurement. This paper presents a discussion of the measurement analysis, along with assumptions and uncertainty estimates.
Atomic-level heterogeneity and defect dynamics in concentrated solid-solution alloys
Performance enhancement of structural materials in extreme radiation environments has been activelyinvestigated for many decades. Traditional alloys, such as steel, brass and aluminum alloys, normallycontain one or two principal element(s) with a low concentration of other elements. While these existin either a mixture of metallic phases (multiple phases) or in a solid solution (single phase), limited orlocalized chemical disorder is a common characteristic of the main matrix. Fundamentally different fromtraditional alloys, recently developed single-phase concentrated solid-solutio n alloys (CSAs) contain mul-tiple elemental species in equiatomic or high concentrations with different elements randomly arrangedon a crystalline lattice. Due to the lack of ordered elemental arrangement in these CSAs, they exhibit sig-nificant chemical disorder and unique site-to-site lattice distortion. While it is well recognized intraditional alloys that minor additions lead to enhanced radiation resistance, it remains unclear inCSAs how atomic-level heterogeneity affects defect formation, damage accumulation, and microstruc-tural evolution. These knowledge gaps have acted as roadblocks to the development of future-generation energy technology. CSAs with a simple crystal structure, but complex chemical disorder,are unique systems that allow us, through replacing principal alloying elements and modifying concen-trations, to study how compositional complexity influences defect dynamics, and to bridge the knowl-edge gaps through understanding intricate electronic- and atomic-level interactions, mass and energytransfer processes, and radiation resistance performance. Recent advances in defect dynamics and irradi-ation performance of CSAs are reviewed, intrinsic chemical effects on radiation performance arediscussed, and direction for future studies is suggested.
Level Alignment of a Prototypical Photocatalytic System: Methanol on TiO2(110)
Explore the source record for details and available documents.
Observation of the continuous transformation of a four level laser into a two level system
A longstanding and fundamental question of laser and maser physics concerns the energy separation ({Delta}{epsilon}) required between the pumped and lasing states of a three (or four) level system. We observe a four level laser gradually transform into a two level (nonlasing) system by photoassociating Cs-Ar thermal atomic pairs and monitoring subsequent stimulated emission on the 6p{sup 2}P{sub 3/2} {yields} 6s{sup 2}S{sub 1/2} (D{sub 2}) transition of Cs at 852.1 nm. Laser excitation spectra demonstrate that the value of {Delta}{epsilon} below which the system rapidly assumes the form of a two level structure and lasing ceases is {approx}0.7kT which corresponds to a Boltzmann factor (exp[-{Delta}{epsilon}/kT]) of 0.5.
Magnetic-field-induced mixed-level Kondo effect in two-level systems
We consider a two-orbital impurity system with intra-and interlevel Coulomb repulsion that is coupled to a single conduction channel. This situation can generically occur in multilevel quantum dots or in systems of coupled quantum dots. For finite energy spacing between spin-degenerate orbitals, an in-plane magnetic field drives the system from a local-singlet ground state to a "mixed-level" Kondo regime, where the Zeeman-split levels are degenerate for opposite-spin states. We use the numerical renormalization group approach to fully characterize this mixed-level Kondo state and discuss its properties in terms of the applied Zeeman field, temperature, and system parameters. Under suitable conditions, the total spectral function is shown to develop a Fermi-level resonance, so that the linear conductance of the system peaks at a finite Zeeman field while it decreases as a function of temperature. These features, as well as the local moment and entropy contribution of the impurity system, are commensurate with Kondo physics, which can be studied in suitably tuned quantum dot systems.
Levels above the 19/2{sup -} isomer in {sup 71}Cu: Persistence of the N=40 neutron shell gap
Two prompt {gamma} rays of energies 2020 and 554 keV were observed in coincidence with delayed transitions depopulating the 19/2{sup -} isomer in the Z=29, N=42 {sup 71}Cu nucleus. The newly identified transitions are proposed to deexcite the 4776- and 5330-keV levels above the 19/2{sup -} isomer. Based on the comparison with the low-lying positive-parity states observed in the Z=42, N=50 {sup 92}Mo nucleus, spin and parity 23/2{sup -} are proposed for the 4776-keV level in {sup 71}Cu. The high-energy, 2020-keV transition is interpreted as arising from the breaking of the N=40 neutron core. Shell-model calculations with a {sup 56}Ni core reproduce the (23/2{sup -}){yields}(19/2{sup -}) gap well, suggesting that the 23/2{sup -} state is dominated by {pi}p{sub 3/2}{nu}((fp){sup 10}(g{sub 9/2}){sup 4}) configurations. The present result constitutes further evidence supporting the view that the N=40 subshell closure persists in {sup 71}Cu, herewith challenging recent suggestions that the coupling of two or more proton or neutron quasiparticles induces a large polarization of the {sup 68}Ni core.
Thermodynamic assessment of the hollandite high‐level radioactive waste form
Abstract Hollandite has been studied as a candidate ceramic waste form for the disposal of high‐level radioactive waste due to its inherent leach resistance and ability to immobilize alkaline‐earth metals such as Cs and Ba at defined lattice sites in the crystallographic structure. The chemical and structural complexity of hollandite‐type phases developed for high‐level waste immobilization limits the systematic experimental research that is required to understand phase development due to the large number of potential additives and compositional ranges that must be evaluated. Modeling the equilibrium behavior of the complex hollandite‐forming oxide waste system would aid in the design and processing of hollandite waste forms by predicting their thermodynamic stability. Thus, a BaO–Cs 2 O–TiO 2 –Cr 2 O 3 –Al 2 O 3 –Fe 2 O 3 –FeO–Ga 2 O 3 thermodynamic database was developed in this work according to the CALPHAD methodology. The compound energy formalism was used to model solid solution phases such as hollandite while the two‐sublattice partially ionic liquid model characterized the oxide melt. Results of model optimizations are presented and discussed including a 1473 K isothermal BaO–Cs 2 O–TiO 2 pseudo‐ternary diagram that extrapolates phase equilibrium behavior to regions not experimentally explored.
Homeostatic levels of nonstructural carbohydrates after 13 yr of drought and irrigation in Pinus sylvestris
Nonstructural carbohydrates (NSCs) are important for the growth and survival of trees. Drought may lead to a decrease in tree growth and to NSC depletion, whereas increased soil moisture in otherwise dry ecosystems may increase growth and NSC concentrations. A long-term (13 yr) irrigation experiment was conducted in a Pinus sylvestris-dominated forest located at the dry margin of the species in southern Switzerland. We measured the relative leaf area, growth, NSCs, needle d13C, [N] and [P] in trees on control and irrigated plots. Irrigation resulted in higher growth rates and carbon isotope discrimination, but did not alter NSC levels. Growth and NSC decreased with decreasing leaf area in both treatments, but NSC did not correlate with leaf-level gas exchange indices, such as foliar d13C, [N] or [P]. A legacy effect was shown, as trees with initially low leaf area had limited ability to respond to prolonged irrigation. The NSC constancy across treatments provides evidence that carbohydrate storage may stay constant when climate changes are sufficiently slow to allow acclimation. Moreover, we speculate that total leaf area, rather than leaf gas exchange per unit leaf area, drives the variation in whole-tree carbohydrate dynamics in this system.
Novel multimodality segmentation using level sets and Jensen-Rényi divergence
Purpose: Positron emission tomography (PET) is playing an increasing role in radiotherapy treatment planning. However, despite progress, robust algorithms for PET and multimodal image segmentation are still lacking, especially if the algorithm were extended to image-guided and adaptive radiotherapy (IGART). This work presents a novel multimodality segmentation algorithm using the Jensen-Rényi divergence (JRD) to evolve the geometric level set contour. The algorithm offers improved noise tolerance which is particularly applicable to segmentation of regions found in PET and cone-beam computed tomography. Methods: A steepest gradient ascent optimization method is used in conjunction with the JRD and a level set active contour to iteratively evolve a contour to partition an image based on statistical divergence of the intensity histograms. The algorithm is evaluated using PET scans of pharyngolaryngeal squamous cell carcinoma with the corresponding histological reference. The multimodality extension of the algorithm is evaluated using 22 PET/CT scans of patients with lung carcinoma and a physical phantom scanned under varying image quality conditions. Results: The average concordance index (CI) of the JRD segmentation of the PET images was 0.56 with an average classification error of 65%. The segmentation of the lung carcinoma images had a maximum diameter relative error of 63%, 19.5%, and 14.8% when using CT, PET, and combined PET/CT images, respectively. The estimated maximal diameters of the gross tumor volume (GTV) showed a high correlation with the macroscopically determined maximal diameters, with aR{sup 2} value of 0.85 and 0.88 using the PET and PET/CT images, respectively. Results from the physical phantom show that the JRD is more robust to image noise compared to mutual information and region growing. Conclusions: The JRD has shown improved noise tolerance compared to mutual information for the purpose of PET image segmentation. Presented is a flexible framework for multimodal image segmentation that can incorporate a large number of inputs efficiently for IGART.
On the determination of reference levels for quality assurance of flattening filter free photon beams in radiation therapy
Purpose: New definitions for some dosimetric parameters for use in quality assurance of flattening filter free (FFF) beams generated by medical linear accelerators have been suggested. The present study aims to validate these suggestions and to propose possible reference levels. Methods: The main characteristics of FFF photon beams were described in terms of: field size, penumbra, unflatness, slope, and peak-position parameters. Data were collected for 6 and 10 MV-FFF beams from three different Varian TrueBeam Linacs. Measurements were performed with a 2D-array (Starcheck system from PTW-Freiburg) and with the portal dosimetry method GLAaS utilizing the build-in portal imager of TrueBeam. Data were also compared to ion chamber measurements. A cross check validation has been performed on a FFF beam of 6 MV generated by a Varian Clinac-iX upgraded to FFF capability. Results : All the parameters suggested to characterize the FFF beams resulted easily measurable and little variation was observed among different Linacs. Referring to two reference field sizes of 10 × 10 and 20 × 20 cm{sup 2}, at SDD = 100 cm and d = dmax, from the portal dosimetry data, the following results (averaging X and Y profiles) were obtained. Field size: 9.95 ± 0.02 and 19.98 ± 0.03 cm for 6 MV-FFF (9.94 ± 0.02 and 19.98 ± 0.03 cm for 10 MV-FFF). Penumbra: 2.7 ± 0.3 and 2.9 ± 0.3 mm for 6 MV-FFF (3.1 ± 0.2 and 3.3 ± 0.3 for 10 MV-FFF). Unflatness: 1.11 ± 0.01 and 1.25 ± 0.01 for 6 MV-FFF (1.21 ± 0.01 and 1.50 ± 0.01 for 10 MV-FFF). Slope: 0.320 ± 0.020%/mm and 0.43 ± 0.015%/mm for 6 MV-FFF (0.657 ± 0.023%/mm and 0.795 ± 0.017%/mm for 10 MV-FFF). Peak Position −0.2 ± 0.2 and −0.4 ± 0.2 mm for 6 MV-FFF (−0.3 ± 0.2 and 0.7 ± 0.3 mm for 10 MV-FFF). Results would depend upon measurement depth. With thresholds set to at least 95% confidence level from the measured data and to account for possible variations between detectors and methods and experimental settings, a tolerance set of: 1 mm for field size and penumbra, 0.04 for unflatness, 0.1%/mm for slope, and 1 mm for peak position could be proposed from our data. Conclusions : The parameters proposed for the characterization and routine control of stability of profiles of FFF beams appear to be a viable solution with a strong similarity to the conventional parameters used for flattened beams. The results from three different TrueBeams and the cross-validation against a Clinac-iX suggested the possible generalization of the methods and the possibility to use common tolerances for the parameters. The data showed also the reproducibility of beam characteristics among different systems (of the same vendor) and the resulting parameter values could therefore be possibly generalized.
Deep level transient spectroscopy study of energy levels in InAs/GaAs self-assembled quantum dots
The energy states in InAs/GaAs self-assembled QD system were measured and analyzed by using capacitance-voltage and deep level transient spectroscopy methods with varying the applied biases and the filling pulse widths. The activation energies of the QD signals were shifted from 0.07 to 0.60 eV by changing the measurement biases, and then these results represent that the QD has many kind of confined energy levels. From the DLTS measurements with varying the filling pulse widths, it was confirmed that the QD has band-like interacting energy levels.
Resolving the EH{sub 6/7} level in 4H-SiC by Laplace-transform deep level transient spectroscopy
We show that Laplace transform deep level transient spectroscopy (LDLTS) is an effective technique for the separation of the overlapping emission rates of the EH{sub 6} and EH{sub 7} levels, which are known to constitute EH{sub 6/7}, a mid-gap level in n-type 4H-SiC. The analysis of the electron irradiation dose, electric field dependence, and the effects of carbon interstitials injection on the emission rates of EH{sub 6} and EH{sub 7} shows that EH{sub 7} is dominant over EH{sub 6} and confirms that their nature is related to a carbon vacancy.