Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LANDING MODULE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Vacuum measurements on the lunar surface.

Results of measurements of neutral gas pressure on the lunar surface made with a cold cathode ionization gauge carried to the moon by Apollo 14. The vacuum quality at the landing site is much influenced by the adsorption of rocket gases and their later release. During surface operations by the astronauts, the pressure was near 10 to the minus 8th torr. No data were obtained between the time of the surface operations and lunar sunset about 12 days later, at which time the temperature fell rapidly to the vicinity of 100 K. The pressure was about 10 to the minus 12th torr shortly after sunset, but intermittent releases of gas, perhaps from within the moon itself, occasionally raised the pressure by less than an order of magnitude for as long as a day or two at a time and on one occasion to about 10 to the minus 10th torr for about an hour. At lunar sunrise, as the surface was warmed rapidly to about 300 K, the pressure rose rapidly to about 10 to the minus 10th torr, most likely due to the release of absorbed gases in the immediate landing area or on the landing module itself. For comparison with interplanetary vacuum conditions, the directed pressure of the solar wind is usually less than 10 to the minus 11th torr and the pressure of random gas motion within the solar wind, less than 10 to the minus 13th torr.

Johnson, F. S.↗

Apollo 17 traverse gravimeter experiment /Preliminary results/

Preliminary results of the traverse gravimeter experiment successfully performed during the Apollo 17 mission are discussed. An earth-moon gravity tie was established. On the basis of several readings, a gravity value of 162,695 + or - 5 mgal was obtained at the lunar-module landing site in the Taurus-Littrow valley. Free-air and Bouguer corrections were applied to the gravity data. The resultant Bouguer anomaly, analyzed with a two-dimensional approximation, shows a relative gravity maximum of about 25 to 30 mgal over the Taurus-Littrow valley. This maximum is interpreted in terms of a 1-km-thick block of basalt flow with a positive density contrast of 0.8 g/cu cm relative to the highland material on either side.

Talwani, M.↗

Apollo-Soyuz pamphlet no. 1: The flight

The goals of the Apollo-Soyuz Test Project are described in this first in a series of nine pamphlets designed as a curriculum supplement for teachers, supervisors, curriculum specialists, and textbook writers as well as for the general public. Aspects of the space flight covered include descriptions of the astronaut-cosmonaut meeting and of the spacecraft and landing module; spacecraft launch; control, and rendezvous; crew work schedule; and telemetry. Experiments performed are listed in tables, and their major results are summarized.

Page, L. W.↗

Balloons on planet Venus - Final results

On June 11 and 15, 1985 two packages with balloons have been inserted in the atmosphere of Venus from the Soviet VEGA landing modules. This paper summarizes the pressure, temperature, wind illumination and backscattering data from the balloons.

Blamont, J.↗

Advanced takeoff procedures for high-speed civil transport community noise reduction

Advanced takeoff procedures were developed for a Mach 2.62 high-speed civil transport configuration (HSCT) equipped with turbine bypass engines, with the goal of reducing the takeoff noise levels for certification to FAR 36, Stage 3 noise levels. The detailed takeoff and landing module for the Flight Optimizations System (FLOPS) computer program was used to generate takeoff profiles. All takeoff procedures were constrained to meet a FAR takeoff field length of 11,000 feet, as well as the minimum required engine-out climb gradients for each airbome segment. Aircraft noise levels at the FAR 36 certification points were calculated using the Aircraft Noise Prediction Program (ANOPP). The study showed that using advanced takeoff procedures in noise certification could result in a 2.25 dB reduction in the amount of noise suppression required to certify this configuration for Stage 3 noise limits. Advanced procedures also resulted in an 8 percent reduction in the 100 EPNdB noise footprint area compared to basic FAR 36 takeoff procedures. In addition, improvements in the lift-to-drag ratio using high-lift devices were shown to produce 1.81 dB more noise reduction when used in combination with advanced takeoff procedures.

Olson, E. D.↗

The Status of Lunar Simulants: Conclusions and Recommendations from the 2005 Lunar Regolith Simulant Materials Workshop

No coordinated program currently exists in the U.S.A to define reference materials to be used as analogs of lunar materials. While such efforts have existed at different times in the past (Apollo Landing Module and Lunar Rover programs and NASA's Space Initiative in the early 1990's), the need for mineral materials chosen to simulate the characteristics of lunar regoliths is a pressing issue that must be addressed today through the collaboration of scientists, engineers and program managers. The 2005 Lunar Regolith Materials Workshop was held at Marshall Space Flight Center in Huntsville, AL on January 24-26,2005 to launch a focused effort of defining the requirements of lunar >simulant materials and make specific recommendations to NASA Headquarters for their production. Nearly 100 scientists and engineers worked during 3 days to accomplish these goals. Their conclusions and recommendations will be presented.

Sibille, L.↗

Challenges of Roll Orientation with Respect to Vehicle Heading at Touchdown for the Orion Command Module

Due to mass constraints, the Orion Command Module landing attention system requires that the capsule be oriented in a specific direction with respect to the horizontal surface-relative velocity (Heading) at touchdown in order to keep crew and vehicle loads within specifications. These constraints apply to both land and water landings. In fact, water landings are even more constrained with the addition of impact angle requirements necessary to slice through the water. There are two primary challenges with achieving this touchdown orientation: 1. Navigation knowledge of velocity (needed to determine Heading) with and without GPS, including the effects of the Heading angle itself becoming undefined as horizontal velocity decreases, and 2. Controlling to the desired orientation in the presences of chute torque and wind gusts that may change the Heading just prior to touchdown. This paper will discuss the design and performance of the current Orion navigation and control system used to achieve the desired orientation at touchdown.

Gay, Robert S.↗

Altair

This slide presentation explores some of the issues that concern the engineers and planners of the Altair Lunar landing module. Particular attention is paid to the issues concerning Lunar dust, and attempts that will be made to test the Altair systems using Lunar dust simulants.

Rucker, Michelle a.↗

Indigenous Carbon Embedded in Apollo 17 Black Volcanic Glass Surface Deposits

The assessment of indigenous organic matter in returned lunar samples was one of the primary scientific goals of the Apollo program. The levels of such organic material were expected to be and found to be small. Previous work on this topic includes Murphy et al. [1] who reported the presence of anthropogenic organics with sub-ppm concentrations in Apollo 11 fines. In Apollo 12 samples, Preti et al. [2] detected low levels, < 10 ppb or below, of more complex organic material that may have been synthesized by abrupt heating during analysis. Kvenvolden et al. [3] detected porphyrin-like pigments at the ng to pg level in an Apollo 11 bulk sample. Hodgson et al. [4] and Ponnamperuma et al. [5] suggested that most if not all porphyrins were synthesized from rocket fuel during module landing. Chang et al. [6] reported indigenous carbon ranging from 5-20 g/g in the form of metal carbides in Apollo 11 fines. Hare et al. [7] reported amino acids at he 50 ng/g level in Apollo 11 samples but suggested the results may be explained as contamination. More recently, Clemett et al. [8] reported simple polycyclic aromatic hydrocarbons at concentrations of < 1ppm in an Apollo 16 soil. Low concentrations of lunar organics may be a consequence not only of its paucity, but also its heterogeneous distribution. If the sample size required for a measurement is large relative to the localization of organics, detection is limited not by ultimate sensitivity but rather by the ability to distinguish an indigenous signature from background contamination [9].

Thomas-Keprta, Kathie L.↗

The Effectiveness of Power Distribution Systems for Deployment on the Lunar Surface

Lunar habitation missions are currently being planned to have astronauts return to the moon by the mid 2020’s with a sustained lunar presence by the end of the decade. The various landed modules needed to support the missions are expected to be distributed around Shackleton Crater at distances ranging from 1 to 15 km and with power needs ranging from 10 kW to 50kW. Current plans call for a solar array to be installed on the rim of the crater that receives near-constant sunlight year around with a power distribution system that transfers power from the source to consumers. This paper details several power distribution systems: DC transmission lines, radio frequency power beaming, and optical power beaming. Sizing algorithms for each of these distributions systems along with their necessary subsystems were developed from literature and subject matter expertise input. Several experiments were then conducted to determine the performance of the systems along with their sensitivities to changes in assumptions for various sub-components. The defined Figures of Merit enable mission designers to select the best power distribution system for each possible power consumer mission scenario. The experimental results were analyzed and compiled into a set of figures that highlight the conditions for which a certain system outperforms the other.

Bradford Robertson↗

The Effectiveness of Power Distribution Systems for Deployment on the Lunar Surface

Lunar habitation missions are currently being planned to have astronauts return to the moon by the mid 2020’s with a sustained lunar presence by the end of the decade. The various landed modules needed to support the missions are expected to be distributed around Shackleton Crater at distances ranging from 1 to 15 km and with power needs ranging from 10 kW to 50kW. Current plans call for a solar array to be installed on the rim of the crater that receives near-constant sunlight year around with a power distribution system that transfers power from the source to consumers. This paper details several power distribution systems: DC transmission lines, radio frequency power beaming, and optical power beaming. Sizing algorithms for each of these distributions systems along with their necessary subsystems were developed from literature and subject matter expertise input. Several experiments were then conducted to determine the performance of the systems along with their sensitivities to changes in assumptions for various sub-components. The defined Figures of Merit enable mission designers to select the best power distribution system for each possible power consumer mission scenario. The experimental results were analyzed and compiled into a set of figures that highlight the conditions for which a certain system outperforms the other.

Bradford Robertson↗

High Altitude Re-entry Plasma Emulation Experiment (HARPEE)

A table-top apparatus has recently been constructed at the NASA Glenn Research Center to investigate potential solutions for the radio-frequency communication blackout problem -- experienced by landing modules during high-speed atmospheric entry. This customized plasma chamber was designed to emulate Earth-based atmospheric entry plasmas with electron densities in the range of 10^16 m^-3 to 10^19 m^-3. The system makes use of a 40-kHz, perforated coaxial electrode pair to generate a disk-shaped, static plasma with an approximate diameter and thickness of 405 mm and 100 mm, respectively. A translatable Langmuir probe was employed to characterize the radial profile of electron temperature and density as a function the 40-kHz power (< 1 kW) and dry-nitrogen flow rate (< 160 SCCM).

plasma↗