Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Isomerization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Mutagenic screening of diamine monomers

The effects of phenyl ring coupling moieties, of isomeric amine positions relative to the coupling groups, and of insertion of other coupling groups on the mutagenic response of a series of dianilines were investigated using the Ames Salmonella assay. Generally, S-9 metabolic activation from Aroclor-induced rat liver was required for mutagenic expression. The range of mutagenicity of steric isomers of several dianiline series was also investigated. No mutagenicity was found for purified samples of o,o' and m,p' isomers of methylene dianiline (MDA) and diaminobenzophenone, while varying degrees of mutagenicity were found for other isomers. The mutagenicity of "benzylogs" of MDA decreased as the degree of linear separation of the m,m' anilino groups by aromatic rings increased. Methylation and two-year storage increased mutagenic response in certain isomers of MDA. However, high performance liquid chromatography indicated there was no discernible change in m,p'-MDA samples aged under varied conditions over four months. Likewise, no change in mutagenicity was found.

Ross, W. D.↗
NASA NTRS1985

Increasing Fire Safety of Epoxies

Epoxy with increased resistance to fire made by reacting any of three commercial epoxide monomers with curing agent consisting of mixture of isomers called "DCEPD". Curing agent incorporates phosphorus and chlorine directly into crosslinking part of polymer. DCEPD produced by nitrating precursor phosphonylmethyl benzene, then reducing resulting isomeric mixture of dinitro compounds.

Kourtides, D. A.↗
NASA NTRS1985

Contact angle and surface tension measurements of a five-ring polyphenyl ether

Contact angle measurements were performed for a five-ring polyphenyl ether isomeric mixture on M-50 steel in a dry nitrogen atmosphere. Two different techniques were used: (1) a tilting plate apparatus, and (2) a sessile drop apparatus. Measurements were made for the temperature range 25 to 190 C. Surface tension was measured by a differential maximum bubble pressure technique over the range 23 to 220C in room air. The critical surface energy of spreading (gamma (sub c)) was determined for the polyphenyl ether by plotting the cosine of the contact angle (theta) versus the surface tension (gamma (sub LV)). The straight line intercept at cosine theta = 1 is defined as gamma (sub c). Gamma (sub c) was found to be 30.1 dyn/cm for the tilting plate technique and 31.3 dyn/cm for the sessile drop technique. These results indicate that the polyphenyl ether is inherently autophobic (i.e., it will not spread on its own surface film until its surface tension is less than gamma (sub c). This phenomenon is discussed in light of the wettability and wear problems encountered with this fluid.

Jones, W. R., Jr.↗
NASA NTRS1985

Theoretical investigation of the interstellar CH3NC/CH3CN ratio

Calculations have been performed to determine the abundance ratio of the metastable isomer CH3NC to the stable isomer CH3CN in dense interstellar clouds. According to gas phase, ion-molecule treatments, these molecules are both synthesized via protonated ion precursors. A calculation has been made of the ratio of the formation rates of the protonated precursor ions, CH3NCH(+) and CH3CNH(+), synthesized via the radiative association reaction between CH3(+) and HCN, which is thought to be the dominant formation process of the two isomeric ions. The calculations, which involve both ab initio quantum chemistry and equilibrium determinations, lead to a predicted CH3NCH(+)/CH3CNH(+) formation rate ratio between 0.1 and 0.4. If this ratio is maintained in the neutral species formed from the precursor ions, theory predicts a sizable abundance for methyl isocyanide (CH3NC) and lends credence to its tentative observation.

Defrees, D. J.↗
NASA NTRS1984

Prepreg cure monitoring using diffuse reflectance-FTIR

An in situ diffuse reflectance-Fourier transform infrared technique was developed to determine infrared spectra of graphite fiber prepregs as they were being cured. A bismaleimide, an epoxy, and addition polyimide matrix resin prepregs were studied. An experimental polyimide adhesive was also examined. Samples were positioned on a small heater at the focal point of diffuse reflectance optics and programmed at 15 F/min while FTIR spectra were being scanned, averaged, and stored. An analysis of the resulting spectra provided basic insights into changes in matrix resin molecular structure which accompanied reactions such as imidization and crosslinking. An endo-exothermal isomerization involving reactive end-caps was confirmed for the addition polyimide prepregs. The results of this study contribute to a fundamental understanding of the processing of composites and adhesives. Such understanding will promote the development of more efficient cure cycles.

Young, P. R.↗
NASA NTRS1985

Photoenergy transduction in halobacterium halobium

The structure and function of a rhodopsin-like pigment bacteriorhodopsin, discovered and isolated from the membranes of the halophile Halobacterium halobium, were studied. Intermediatesm appearing in the cyclic photoreaction that drives the proton translocation, were spectroscopically characterized. The charge translocation in membrane monolayers and mulitlayers placed between electrodes were kinetically resolved. A model was developed for the proton translocation process, in which the isomerization of the retinal Schiff base decreases its pK to drive the proton off and simultaneaouly changes the connectivity from the cytoplasmic surface to the external surface. The stoichiometry of proton pumping in intact cells and the effect of the light generated electrochemical potential on the kinetics of the photoreaction cycle and the synthesis of ATP were investigated.

Stoeckenius, W.↗
NASA NTRS1986

Process for preparing essentially colorless polyimide film containing phenoxy-linked diamines

A polyimide film that is approximately 90% transparent at 500 nm, useful for thermal protective coatings and solar cells, and the processes for preparing the same by thermal and chemical conversion are disclosed. An essential feature for achieving maximum optical transparency films requires utilizing recrystallized and/or sublimated specific aromatic diamines and dianhydride monomers and introducing phenoxy or thiophenyl separator groups and isomeric m,m' or o,p'-oriented diamines into the polymer molecular structure. The incorporation of these groups in the polymer structure serves to separate the chromaphoric centers and reduce the formation of inter-chain and intra-chain charge transfer complexes which normally cause absorptions in the UV-visible range. The films may be obtained by hand, brushing, casting, or spraying a layer of polyamic acid solutions onto a surface and thermally converting the applied layer to the polyimide, or the polyamic acid solution can be chemically converted to the polyimide, subsequentially dissolved in an organic solvent, and applied as a polyimide film layer with the solvent therein thermally removed.

Stclair, A. K.↗
NASA NTRS1985

The chemical state of dense interstellar clouds - An overview

The currently known interstellar molecules and isotopes are listed, procedures for determining relative chemical abundances in molecular clouds are discussed, and current best estimates for such abundances in regions of differing physical properties are presented. Among the results are a general chemical similarity across a range of density and temperature for quiescent clouds, and some striking differences among regions which are not easily related to such physical parameters and may instead reflect cloud history and evolution. The possibility of constraining chemical models via measurements of relative abundances for the isomeric pairs HNC/HCN, CH3NC/CH3CN, and HOC(+)/HCO(+) is discussed in detail.

Irvine, W. M.↗
NASA NTRS1986

Contact angle and surface tension measurements of a five-ring polyphenyl ether

Contact angle measurements were performed for a five-ring polyphenyl ether isomeric mixture on M-50 steel in a dry nitrogen atmosphere. Two different techniques were used: (1) a tilting plate apparatus, and (2) a sessile drop apparatus. Measurements were made for the temperature range 25 to 190 C. Surface tension was measured by a differential maximum bubble pressure technique over the range 23 to 220 C in room air. The critical surface energy of spreading (gamma /sub c/) was determined for the polyphenyl ether by plotting the cosine of the contact angle (theta) versus the surface tension (gamma /sub LV/). The straight line intercept at cosine theta = 1 is defined as gamma (sub c). Gamma (sub c) was found to be 30.1 dyn/cm for the tilting plate technique and 31.3 dyn/cm for the sessile drop technique. These results indicate that the polyphenyl ether is inherently autophobic (i.e., it will not spread on its own surface film until its surface tension is less than gamma /sub c/). This phenomenon is discussed in light of the wettability and wear problems encountered with this fluid.

Jones, W. R., Jr.↗
NASA NTRS1985

The rhodopsin-like pigments of halobacteria - Light-energy and signal transducers in an archaebacterium

Three, small retinylidene proteins observed in halobacteria are described. The characteristics of bacteriorhodopsin (bR), which is synthesized during low O2 tension and intense illumination, and the role of bR in the cyclic photoreactions that translocate protons are examined. The detected light-driven chloride influx pigment, halorhodopsin (hR), is also capable of light-driven ion translocation; the hR transport reactions which are chloride dependent and involve isomerization are studied. The sensory photosystem of halobacteria and the receptor functions of the retinal pigment slow rhodopsin are discussed. The similarity of the choromphore structure and photoreactions, and the evolutionary relation between halobacteria and animal pigments are considered.

Stoeckenius, W.↗
NASA NTRS1986

Soluble aromatic polyimides for film and coating applications

Linear all-aromatic polyimides have been synthesized and characterized which show much potential as films and coatings for electronic applications. Structure-property relations with regard to methods for obtaining solubility of fully imidized polymers will be discussed. Methods used to obtain solubility include variation of polymer molecular structure, variation of isomerism of the diamine monomer, modification of cure time/temperature and atmosphere. Other properties of soluble polyimides will be presented which include glass transition temperatures, thermooxidative stabilities, UV-visible spectra, and refractive indices.

St.clair, Anne K.↗
NASA NTRS1987

Reactions of Atomic Oxygen (O(3P)) with Polybutadienes and Related Polymers

Thin films of the following polymers were exposed at ambient temperature to ground-state oxygen atoms (O(3P)), generated by a radio-frequency glow discharge in O2: cis- and trans-1,4-polybutadienes (CB and TB), amorphous 1,2-polybutadiene (VB), polybutadienes with different 1,4/1,2 contents, trans polypentenamer (TP), cis and trans polyoctenamers (CO and TO), and ethylene-propylene rubber (EPM). Transmission infrared spectra of CB and TB films revealed extensive surface recession, or etching, unaccompanied by any microstructural changes within the films, demonstrating that the reactions were confined to the surface layers. Contrary to the report by Rabek, Lucki, and Ranby (1979), there was no O(3P)-induced cis-trans isomerization in CB or TB. From weight-loss measurements, etch rates for polybutadienes were found to be markedly dependent on vinyl content, decreasing by two orders of magnitude from CB (2% 1,2) to structures with 30 to 40% 1,2 double bonds, thereafter increasing by half an order of magnitude to VB (97% 1,2). Relative etch rates for EMP and the polyalkenamers were in the order: EMP is greater than CO (or TO) is greater than TP is greater than CB. The sole non-elastomer examined, TB, had an etch rate about six times that of CB, ascribable to a morphology difference. Cis/trans content had a negligible effect on the etch rate of the polyalkenamers. Mechanisms involving crosslinking through units are proposed for the unexpected protection imparted to polybutadienes by the 1,2 double bonds.

Golub, Morton A.↗
NASA NTRS1986

Enhanced Raman spectroscopic study of rotational isomers on metal surfaces

Surfaced-enhanced Raman spectroscopy has been used to study rotational isomers of succinonitrile and N-methyl-thioacetamide on Cu and Ag surfaces. Both the gauche and trans conformers of succinonitrile are found to chemisorb on the metal surface. The doubly degenerate nu(C-triple bond-N) in the free molecules is removed when succinonitrile adsorbs on copper, which indicates that the two (C-triple bond-N) groups are no longer chemically equivalent. Both conformers are found to coordinate to the copper surface through the pi system of one of the two (C-triple bond-N) groups. In the case of N-methyl-thioacetamide, the population of the cis isomer is greatly increased on Cu and Ag surfaces. This is probably due to surface-induced cis-trans isomerization, in which the predominant trans isomer is converted to the cis isomer.

Loo, B. H.↗
NASA NTRS1987

Kinetic analysis of the template effect in ribooligoguanylate elongation

The paper presents kinetic studies on the reaction of elongation of the 3-prime-5-prime-linked ribooligoguanylates with guanosine 5-prime-phospho-2-methylimidazolide (2-MelmpG) in the presence or absence of a complementary template, the polycytidylic acid. In the absence of poly(C), the reaction leads to three isomeric oligomers that are elongated by one monomer unit: the 3-prime-5-prime linked, the 2-prime-5-prime linked, and the pyrophosphate, formed in a ratio of 1:2:5. In the presence of the template, the reaction is 20-fold faster and yields products (n + 1), (n + 2), (n + 3), etc., as long as 2-MelmpG is available. The formation of the natural, 3-prime-5-prime-linked isomer, is enhanced selectively by 140-fold at 37 C, and its relative yield increases with decreasing temperature.

Kanavarioti, Anastassia↗
NASA NTRS1987

Soluble aromatic polyimides for film and coating applications

Linear all-aromatic polyimides have been synthesized and characterized which show much potential as films and coatings for electronic applications. Structure-property relations with regard to methods for obtaining solubility of fully imidized polymers will be discussed. Methods used to obtain solubility include variation of polymer molecular structure, variation of isomerism of the diamine monomer, modification of cure time/temperature and atmosphere. Other properties of soluble polyimides will be presented which include glass transition temperatures, thermooxidative stabilities, UV-visible spectra, and refractive indices.

St.clair, Anne K.↗
NASA NTRS1987

Soluble aromatic polyimides for film and coating applications

The effect of changing isomeric points of attachment of phenoxy units in the diamine portion of several all-aromatic polyimide systems on the solubility of these materials were investigated. It was found that solubility could be enhanced by the presence of meta and ortho isomer links in the diamine portion of the molecule. The soluble phenoxy-linked polyimides yield tough flexible colorless to pale-yellow transparent films from solutions of chlorinated solvents, with high potential for use in electronic applications.

St. Clair, Anne K.↗
NASA NTRS1988

Modified reaction mechanism of aerated n-dodecane liquid flowing over heated metal tubes

The degradation mechanism of the n-dodecane was studied using a modified jet fuel thermal oxidation tester containing a sample withdrawal system as a reaction vessel. The reaction products were identified using gas chromatography and mass spectorometry. The soluble products were found to consist mainly of C5-C10 n-alkanes and 1-alkenes, C7-C10 aldehydes, tetrahydrofuran derivatives, dodecanol and dodecanone isomers, dodecyl hydroperoxide (ROOH) decomposition products, and C24 alkane isomers. The data from the experiments agreed with those of Hazlett et al. (1977). It was found that alkyl peroxide radical reactions dominate in the autooxidation temperature regime (at T not above 300 C); the dominant path is for the alkyl peroxyl radical to react bimolecularly with fuel to yield primarily alkyl hydroperoxides. The alkyl peroxide radical also undergoes self-termination and unimolecular isomerization and decomposition reactions, to yield smaller amounts of C12 alcohol plus ketone products and tetrahydrofuran derivatives, respectively.

Reddy, K. T.↗