Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ion conducting polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Single Ion Conducting Hairy Nanoparticle Additive to Improve Cycling Stability of Solid Polymer Electrolytes

The development of a solid electrolyte that can impede dendrite growth while still maintaining an appropriate level of conductivity is essential for improving performance of solid-state Li-ion battery. In this paper, we report the synthesis of single Li-ion conducting hairy nanoparticle (NP) materials that improved the cycling stability of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-doped poly(ethylene oxide) (PEO) solid electrolyte without significant reduction in conductivity. To unveil mechanisms leading to improved cycling stability, several characterization techniques including broadband dielectric spectroscopy, differential scanning calorimetry, small angle X-ray scattering, transmission electron microscopy, and shear rheology were used to study properties of polymer composites (PC) with added hairy NPs. It was found that hairy NPs influenced the Li/electrolyte interface and improved mechanical properties of bulk composites, all of which contributed to homogenous Li plating and stripping. The improved performance has been found in composites with concentrations of 4.8 and 9.1 weight % of added hairy NPs, which enabled Li cycling stability at 0.2 mA cm–2 critical current density (>300 h) that was otherwise not possible in either PEO-LiTFSI alone or PEO-LiTFSI composites containing a polymer identical to that attached to hairy NPs. Based on the discovered ability of hairy NP to influence bulk and interfacial properties of solid electrolyte, their use as additives is expected to be equally effective in reducing dendrite formation in other electrolytes relevant for the design of solid-state battery.

25 ENERGY STORAGE↗
DOE OSTI2020

Ionomers for electrochemical energy conversion & storage technologies

We report ionomers, which are used as polymer electrolyte membranes as well as catalyst binders in membrane electrode assemblies, are a key component of electrochemical energy conversion and storage technologies such as fuel cells, electrolyzers, and flow batteries. The use of ionomers in these clean energy technologies has a long history and there has been considerable progress in developing low-cost, high-performance ionomers in recent years. In this review article, we discuss some highlights from recent developments of ionomers with emphasis on chemically stable, mechanically durable, high-performance hydrocarbon ionomers and their state-of-the-art performance in electrochemical energy conversion devices. Future directions of ionomer research that are important to enhance our understanding and the remaining challenges related to device level applications are addressed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unraveling the pathway towards superionic transport in polymer electrolytes

Ionic transport in polymers is critical for Li-ion batteries, fuel cells, flow batteries and many other energy storage and conversion technologies. A significant enhancement of ion conductivity in polymers may be achieved through an increase in the polarity of side chains and their self-organization into specific morphologies, which can potentially act as percolated ionic structures. However, higher polarity increases attractive interactions within a polymer matrix and slows down its segmental dynamics, which conversely hinders ionic transport. To overcome this tradeoff, we designed the functionalization of a Li salt-doped polymer matrix by tailored amounts of zwitterionic (ZI) groups. Our results suggest the emergence of a self-assembled percolation conductivity regime above a specific ZI concentration, in which ion hopping decouples from segmental dynamics by up to ten orders of magnitude. Consequently, in the highly concentrated ZI regime, our polymeric materials exhibit in their glassy state energy barriers for ion hopping similar to, or even smaller than, those reported for superionic ceramics. Our study also reveals that ion dynamics in the poly(zwitterion) with all monomers carrying ZI groups is significantly faster than that of a monomeric ZI compound, although the latter has much faster structural relaxation. Furthermore, this result highlights the crucial role played by the local morphology on the ion transport of polymer electrolytes and opens a new pathway for the design of superionic polymers, significantly expanding the current limited portfolio of solid-state electrolytes for energy applications.

Ion conductivity↗
DOE OSTI2024

Percolating Interfacial Layers Enhance Conductivity in Polymer–Composite Electrolytes

Here, this study investigates the impact of the ceramic particle size on the bulk and interfacial ion transport properties of composite polymer electrolytes. The ceramic particles used for this study are micrometer-sized commercial lithium lanthanum titanate (LLTO) powders and LLTO nanorods (NR) prepared in the laboratory. The polymer matrices are vinylene carbonate (VEC) based single-ion-conducting (SIC) and dual-ion-conducting (DIC) polymer electrolytes. Our results reveal that the addition of LLTO NR results in improved ion transport, while the addition of commercial LLTO is ineffective or even detrimental. We ascribe these results to the formation of an interfacial polymer layer around the LLTO particles with enhanced Li + mobility and estimate the thickness of the interfacial layer to be ∼5 nm. The high surface-to-volume ratio of the LLTO NR leads to the percolation of the interfacial region at a relatively low ceramic loading of 30 wt %. This study highlights the importance of achieving percolation of the interface region (as opposed to the particles themselves) within the composite electrolyte when the interfacial layer is the enhancement mechanism.

Ock, Ji-young↗
DOE OSTI2026

Superionic conduction in solid polymer electrolytes – decoupling ion transport from segmental relaxation

Solvent-free, solid polymer electrolytes (SPEs) are promising candidates for next-generation, electrochemical energy storage systems due to their potential to enhance safety and performance, enable flexible device architectures, and streamline manufacturing processes. Conventional SPEs suffer from limited ionic conductivity due to the strong coupling between ion transport and (generally slow) polymer segmental relaxation. The realization of superionic conduction in SPEs, in which ions move faster than the structural relaxation of the polymers, requires a shift in design principles to promote this type of decoupled ion motion. In this perspective, we discuss how polymer architecture, ion–ion correlations, and ion–polymer interactions can unlock superionic behavior. We highlight several key design features, such as crystallinity, bulky side groups, high molecular weight, and percolating ionic aggregation, with a focus on creating low-barrier transport pathways in various polymer systems. We also demonstrate opportunities to combine polymer chemistry and data science through high-throughput and automated screening approaches to reveal how phase behavior, ion dynamics, and ionic interactions govern transport, thereby potentially enabling data-driven discovery of superionic polymer electrolyte materials.

Yang, Mengying [Univ. of Delaware, Newark, DE (Uni↗
DOE OSTI2020

Ion-Conducting Thermoresponsive Films Based on Polymer-Grafted Cellulose Nanocrystals

Mechanically robust, thermo-responsive, ion-conducting nanocomposite films are prepared from poly(2-phenylethyl methacrylate) grafted cellulose nanocrystals (MxG-CNC-g-PPMA). One-component nanocomposite films of the polymer grafted nanoparticle (PGN) MxG-CNC-g-PPMA are imbibed with 30 wt% imidazolium-based ionic liquid, to produce flexible ion-conducting films. These films with 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (MxG-CNC-g-PPMA/[H]) not only displays remarkable improvements in toughness (>25 times) and tensile strength (>70 times) relative to the corresponding nanocomposites consisting of the ionic liquid imbibed in the two component CNC/PPMA nanocomposite, but also shows higher ionic conductivity than the corresponding neat PPMA with the same wt.% of ionic liquid. Notably, the one-component film containing 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (MxG-CNC-g-PPMA/[E]) exhibits temperature responsive ionic conduction. The ionic conductivity decreases at around 60°C as a consequence of the lower critical solution temperature (LCST) phase transition of the grafted polymer in the ionic liquid, which leads to phase separation. Moreover, holding the MxG-CNC-g-PPMA/[E] film at room temperature for 24 hours returns the film to its original homogenous state. These materials exhibit properties relevant to thermal cutoff safety devices (e.g., thermal fuse) where a reduction in conductivity above a critical temperature is needed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effects of Ion Size and Dielectric Constant on Ion Transport and Transference Number in Polymer Electrolytes

Salt-doped polymers without added solvents have potential as nonflammable, robust electrolytes for batteries but suffer from low ion conductivity. Using bulky anions with delocalized charge may reduce ion agglomeration and increase conduction. However, size asymmetry between ions may increase preferential solvation of cations versus the larger anions, lowering the transference number t + (fraction of conductivity contributed by the cation, relevant to battery performance). We use coarse-grained molecular dynamics simulations, including a 1/r 4 potential to capture size-dependent solvation effects, to relate polymer and ion chemistry to t + and overall conductivity. At low ion size disparity, increasing dielectric constant improves cation conduction due to the mitigation of ion aggregation and correlated cation-anion motion. However, at high ion size disparity, high dielectric medium results in strong preferential solvation of cations, reducing cation mobility and t + . The trade-off between better cation-anion separation and cation preferential solvation suggests that the strategy of developing high dielectric polymers may enhance performance only at low ion size disparity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Large-Area Lithium Electrode Sub-Assemblies (LESAs) Protected by Self Forming Microstructured Polymer-Inorganic Single-Ion Conducting Composites (Final Report)

The aim of this project is to realize a low-cost, safe, reversible, high-areal capacity lithium metal electrode though the use of scalable, low-cost Lithium Electrode Sub-Assembly (LESA). At its core, the LESA applies novel polymer scaffolds to nanostructure inorganic ionic materials into high-conductivity composites that stabilize lithium anodes during high-rate, high-capacity cycling in lithium metal batteries. Fundamental investigations from this project identified a newly defined region of stability for composites with respect to the shear modulus and lithium molar volume ratio which have been broadly applied in the scientific literature for a multitude of different systems. The advancements achieved in this field have furthered the fundamental understanding of lithium metal electrode chemistry and degradation mechanisms and resulted in a lithium metal anode with improved cycle life.

25 ENERGY STORAGE↗
DOE OSTI2020

Development of lithium ion conducting interface between lithium metal and a lithium ion conducting ceramic using block polymers

The lithium-air (Li-air) technology developed by EDF uses an air electrode which works with an aqueous electrolyte, which prevent the use of unprotected lithium metal electrode. A Li+ ionic conductor glass ceramic is used to separate the aqueous electrolyte compartment from the negative lithium electrode. However, this glass-ceramic is not stable in contact with lithium, it is thus necessary to add a protective buffer layer. In another hand, this protection should ideally resist to lithium dendritic growth. It is in this context that this research project which has as goal the development of a protective buffer layer based on block copolymer electrolytes (BCE) between the lithium metal and the lithium ionic conductor ceramic, for lithium-air battery. In a first part, the BCE is studied in lithium-lithium symmetric cells, in order to determine their electrochemical properties such as ionic conductivity, steady state transference number, and finally their resistance to dendritic growth during cycling. Several characterization techniques were employed and especially hard X-ray micro-tomography to analyze the lithium morphology before and after cycling. For single-ion BCE, we expect to suppress dendritic growth, however, we report here for the first time, the visualization of a homogeneous growth of lithium but the formation of dense lithium objects. In another part, the composite BCE-ceramic is studied by electrochemical impedance spectroscopy (EIS). The cycling of lithium-composite-lithium symmetric cells and the analysis of the EIS measurement after each cycle permit to determine if the dendrites have cross the protective layer and are in contact with the ceramic. Besides, the quantification of the polarization loss at the interface polymer-ceramic is evaluated by polarization experiments. This contribution is found to be small.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nanoscale Ion Transport Enhances Conductivity in Solid Polymer-Ceramic Lithium Electrolytes

The predictive design of flexible and solvent-free polymer electrolytes for solid-state batteries requires an understanding of the fundamental principles governing the ion transport. In this work, we establish a correlation among the composite structures, polymer segmental dynamics, and lithium ion (Li + ) transport in a ceramic-polymer composite. Elucidating this structure–property relationship will allow tailoring of the Li + conductivity by optimizing the macroscopic electrochemical stability of the electrolyte. The ion dissociation from the slow polymer segmental dynamics was found to be enhanced by controlling the morphology and functionality of the polymer/ceramic interface. The chemical structure of the Li + salt in the composite electrolyte was correlated with the size of the ionic cluster domains, the conductivity mechanism, and the electrochemical stability of the electrolyte. Polyethylene oxide (PEO) filled with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) or lithium bis(fluorosulfonyl) imide (LiFSI) salts was used as a matrix. A garnet electrolyte, aluminum substituted lithium lanthanum zirconium oxide (Al-LLZO) with a planar geometry, was used for the ceramic nanoparticle moieties. Further, the dynamics of the strongly bound and highly mobile Li + were investigated using dielectric relaxation spectroscopy. The incorporation of the Al-LLZO platelets increased the number density of more mobile Li + . The structure of the nanoscale ion-agglomeration was investigated by small-angle X-ray scattering, while molecular dynamics (MD) simulation studies were conducted to obtain the fundamental mechanism of the decorrelation of the Li + in the LiTFSI and LiFSI salts from the long PEO chain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Conductive Organometallic Polymers from Soluble Superatom Ions

Superatomic crystals comprising ligand-capped, metal chalcogenide clusters and fullerenes are modular materials that exhibit enhanced electronic, magnetic, and thermal conductivity properties. We find that neutral, M 4 S 4 (M = Fe, Co) clusters stabilized with N -heterocyclic carbenes (NHCs) can transfer charge to C 60 fullerene to form binary superatomic crystals. Notably, these compounds are soluble in various organic solvents, allowing their properties to be investigated in solution, unlike traditional fullerene-based superatomic crystals. The ion pairs can be further assembled into organometallic polymers using Janus-bis(NHCs) to cross-link the oxidized M 4 S 4 units. We show that the superatomic polymers are more conductive than both the precursor superatomic crystals and the polymers containing only neutral M 4 S 4 clusters. Similar conductivity values can be obtained when neutral M 4 S 4 –NHC polymers are doped with solutions of C 60 fullerene. These findings demonstrate that next generation superatomic materials can be prepared via the combination of charge transfer and polymerization with appropriate cross-linking agents.

carbon nanomaterials↗
DOE OSTI2023

Electrospinning of PVdF-HFP: novel composite polymer electrolytes (CPES) with enhanced ionic conductivities for lithium-sulfur batteries

The invention relates to lithium ion batteries and, more particularly, to lithium ion conducting composite polymer electrolyte separators. The separators include a nanofiber mat composed of electrospun nanofibers. The nanofibers include a polymer having one or more polar halogen groups, a lithium-containing solid or liquid electrolyte and nanoparticle filler. The polymer, electrolyte and filler are combined to form a solution that is subjected to the electro-spinning process to produce electrospun nanofibers in the form of the mat.

Kumta, Prashant N.↗
DOE OSTI2025

What is the Role of Relative Humidity on Conductivity in Polymer Electrolytes?

Ion transport properties in polymer electrolytes have been widely studied under rigorously dry and highly water-swollen conditions. However, the transition between these extremes, i.e., the low hydration regime, is still poorly understood at the molecular level and relevant to applications ranging from battery electrolytes to electrophoretic separations. Here, in this study, we apply atomistic molecular dynamics simulations to probe the role of hydration on ion mobilities and conductivities in LiTFSI-doped polyethers at low water content (less than 10% water by volume), which corresponds to 0−80% relative humidity conditions. With increasing water content, Li + ions exhibit two distinct regimes in their mobilities. At low water content, the majority of the Li + ions are weakly hydrated (two or fewer water molecules per Li + ion), maintaining strong interactions with their polymer solvation cage, and therefore exhibit only a weak increase in mobility relative to dry conditions. As water content increases, Li + ions form complete hydration shells, residing within water-rich domains that promote faster mobilities. Further, Li + mobilities increase more significantly in polymer electrolytes composed of more hydrophilic polymers and higher salt concentrations due to the formation of larger water-rich domains. In contrast, TFSI − has comparatively weak interactions with both the polymer and water, exhibiting a monotonic increase in mobility as a function of water content. Overall, these results help clarify the molecular mechanisms underlying ionic mobilities and conductivities in polymer electrolytes at low water content.

36 MATERIALS SCIENCE↗
NASA NTRS2007

Use of Ionic Liquids in Rod-Coil Block Copolyimides for Improved Lithium Ion Conduction

Solvent-free, solid polymer electrolytes (SPE) have the potential to improve safety, increase design flexibility and enhance performance of rechargeable lithium batteries. Solution based electrolytes are flammable and typically incompatible with lithium metal anodes, limiting energy density. We have previously demonstrated use of polyimide rod coil block copolymers doped with lithium salts as electrolytes for lithium polymer batteries. The polyimide rod blocks provide dimensional stability while the polyethylene oxide (PEO) coil portions conduct ions. Phase separation of the rods and coils in these highly branched polymers provide channels with an order of magnitude improvement in lithium conduction over polyethylene oxide itself at room temperature. In addition, the polymers have been demonstrated in coin cells to be compatible with lithium metal. For practical use at room temperature and below, however, at least an order of magnitude improvement in ion conduction is still required. The addition of nonvolatile, room temperature ionic liquids has been shown to improve the ionic conductivity of high molecular weight PEO. Herein we describe use of these molten salts to improve ionic conductivity in the rod-coil block copolymers.

Meador, Mary Ann B.↗
DOE OSTI2020

Highly-Cyclable Room-Temperature Phosphorene Polymer Electrolyte Composites for Li Metal Batteries

Despite significant interest toward solid-state electrolytes owing to their superior safety in comparison to liquid-based electrolytes, sluggish ion diffusion and high interfacial resistance limit their application in durable and high-power density batteries. Here, a novel quasi-solid Li + ion conductive nanocomposite polymer electrolyte containing black phosphorous (BP) nanosheets is reported. The developed electrolyte is successfully cycled against Li metal (over 550 h cycling) at 1 mA cm -2 at room temperature. The cycling overpotential is dropped by 75% in comparison to BP-free polymer composite electrolyte indicating lower interfacial resistance at the electrode/electrolyte interfaces. Molecular dynamics simulations reveal that the coordination number of Li + ions around (trifluoromethanesulfonyl)imide (TFSI - ) pairs and ethylene-oxide chains decreases at the Li metal/electrolyte interface, which facilitates the Li + transport through the polymer host. Here, density functional theory calculations confirm that the adsorption of the LiTFSI molecules at the BP surface leads to the weakening of N and Li atomic bonding and enhances the dissociation of Li + ions. This work offers a new potential mechanism to tune the bulk and interfacial ionic conductivity of solid-state electrolytes that may lead to a new generation of lithium polymer batteries with high ionic conduction kinetics and stable long-life cycling.

2D materials↗
DOE OSTI2021

Nanostructured Block Polymer Electrolytes: Tailoring Self-Assembly to Unlock the Potential in Lithium-Ion Batteries

Ion-containing solid block polymer (BP) electrolytes can self-assemble into microphase-separated domains to facilitate the independent optimization of ion conduction and mechanical stability; this assembly behavior has the potential to improve the functionality and safety of lithium-ion batteries over liquid electrolytes to meet future demands (e.g., large capacities and long lifetimes) in various applications. However, significant enhancements in the ionic conductivity and processability of BPs must be realized for BP-based electrolytes to become robust alternatives in commercial devices. Toward this end, the controlled modification of BP electrolytes’ intra-domain (nanometer-scale) and multi-grain (micrometer-scale) structure is one viable approach; intra-domain ion transport and segmental compatibility (related to the effective Flory–Huggins parameter, χ eff ) can be increased by tuning the ion and monomer-segment distributions, and the morphology can be selected such that the multi-grain transport is less sensitive to grain size and orientation.

25 ENERGY STORAGE↗