Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Incident response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Dust Abrasion Damage on Martian Solar Arrays: Experimental Investigation and Opportunity Rover Performance Analysis

Here we investigate the effects of erosion and weathering that occur on III-V cover-glass interconnected cells (CICs) after exposure to Mars dust storm conditions. The durability of these materials in a Martian environment is not well characterized so we perform analogous experimentation. To replicate the dust impingement, test coupons were placed in an enclosure and sandblasted with Mars dust simulant. We show the J-V response dependency on both incident angle and exposure times. We find that the simulated Martian dust storm often results in damage to the anti-reflective coating and subsequent reduced short circuit current. Reduction in the open circuit voltage is observed, likely caused by structural damage to the crystal lattice after CIC fracture. We employ data-driven modeling to determine a performance degradation rate that is consistent with zero within uncertainty. We also quantify the soiling contribution and power degradation of the photovoltaic cells on Mars through analysis of 4.95 Martian years of report-out power conditions from the Opportunity rover. We find that atmospheric dust suspended due to a weather event does not result in instantaneous settled dust on the PV cells. We calculate via autocorrelation function that the dust settling rate is approximately 21 Sols from atmospheric dust suspension. The findings presented here deliver a realistic approximation for the insolation values and subsequent PV power expected over time on the Martian surface thus informing future dust abatement systems.

McMillon-Brown, Lyndsey↗

Dust Abrasion Damage on Martian Solar Arrays: Experimental Investigation and Opportunity Rover Performance Analysis

Here we investigate the effects of erosion and weathering that occur on III-V cover-glass interconnected cells (CICs) after exposure to Mars dust storm conditions. The durability of these materials in a Martian environment is not well characterized so we perform analogous experimentation. To replicate the dust impingement, test coupons were placed in an enclosure and sandblasted with Mars dust simulant. We show the J-V response dependency on both incident angle and exposure times. We find that the simulated Martian dust storm often results in damage to the anti-reflective coating and subsequent reduced short circuit current. Reduction in the open circuit voltage is observed, likely caused by structural damage to the crystal lattice after CIC fracture. We employ data-driven modeling to determine a performance degradation rate that is consistent with zero within uncertainty. We also quantify the soiling contribution and power degradation of the photovoltaic cells on Mars through analysis of 4.95 Martian years of report-out power conditions from the Opportunity rover. We find that atmospheric dust suspended due to a weather event does not result in instantaneous settled dust on the PV cells. We calculate via autocorrelation function that the dust settling rate is approximately 21 Sols from atmospheric dust suspension. The findings presented here deliver a realistic approximation for the insolation values and subsequent PV power expected over time on the Martian surface thus informing future dust abatement systems.

McMillon-Brown, Lyndsey↗

TCL4 UTM (UAS Traffic Management) Nevada 2019 Flight Tests, Airspace Operations Laboratory (AOL) Report

The Unmanned Aircraft Systems (UAS) Traffic Management (UTM) research project has been developing and testing concept ideas for enabling small UAS (sUAS) operations in low altitude airspace (ground to 400 feet). To do this, NASA has organized a series of flight test demonstrations. Technology Capability Level-4 (TCL4) flight tests were conducted at a Nevada, USA test site, during June 2019. The testing resulted in over 300 data collection flights using eight live rotorcraft, 15 simulated vehicles, involving six flight crews and five Unmanned Aerial System (UAS) Service Suppliers (USS). The TCL4 approach was designed to demonstrate five scenarios that set up five diverse sets of UAS events and activities. The Nevada test site focused on three of these scenarios: an incoming weather front, a concert event with an incident requiring an emergency response, and a scenario where multiple vehicles experienced Communication, Navigation, and Surveillance (CNS) issues. The test site created their scenarios to each have three phases and were required to complete three executions of each scenario, for a total of nine missions per Nevada vehicle per scenario. This document presents data collected from participants during the TCL4-Nevada flight test that provides information about how much and how well operators were able to make use of UTM functions and information, with the goal of exploring what the minimum information requirements and/or best practices might be in TCL4 operations. The driving enquiry was: how do UTM tools and features support (human) operators leading to safe and effective conduct of large-scale beyond visual line of sight (BVLOS) sUAS operations in “urban canyon” environments? As with the data collected during previous similar tests (e.g., TCL3, Martin et al., 2019), the quality of the UTM information exchanged, and the meaningfulness and therefore usefulness of this information, were all focal points of the questions asked and the data collected. Data aligned with five human-system attributes to indicate that UTM provided information that contributed to users’ ability to operate safely and effectively within UTM, but that information was not always complete and was sometimes unclear.

UTM↗

BERT-based Topic Modeling and Information Retrieval to Support Fishbone Diagramming for Safe Integration of Unmanned Aircraft Systems in Wildfire Response

Recent concepts for emerging wildfire response operations have included unmanned aircraft systems (UAS) due to their increasing accessibility and capabilities. To integrate UAS into wildfire response safely, researchers have studied the use of large repositories of historic incident reports to improve the scope of root cause analysis. Recent work has emphasized applying state-of-the-art natural language processing techniques to extract useful information from these repositories. However, it has not yet been studied how these results can be interpreted and integrated into the systems engineering process. In this work, we propose a process in which Bidirectional Encoder Representations from Transformers (BERT)-based topic modeling and information retrieval are applied to a relevant set of documents in order to support the development of a fishbone diagram in a semiautomated process. High-level themes in the document set are identified using topic modeling, which are then refined and interpreted by a human analyst. Then, the themes are used to guide a finer search using information retrieval, which returns specific incident reports of relevance. This provides traceability to specific incidents as well as broader categorizations that comprise the fishbone branches. We apply the proposed process to relevant documents from NASA’s Aviation Safety Reporting System (ASRS). The proposed process is widely applicable when relevant documents are available, and the results from this study will be useful to identifying potential causes of wildfire response UAS incidents.

hazard analysis↗

BERT-based Topic Modeling and Information Retrieval to Support Fishbone Diagramming for Safe Integration of Unmanned Aircraft Systems in Wildfire Response

Recent concepts for emerging wildfire response operations have included unmanned aircraft systems (UAS) due to their increasing accessibility and capabilities. To integrate UAS into wildfire response safely, researchers have studied the use of large repositories of historic incident reports to improve the scope of root cause analysis. Recent work has emphasized applying state-of-the-art natural language processing techniques to extract useful information from these repositories. However, it has not yet been studied how these results can be interpreted and integrated into the systems engineering process. In this work, we propose a process in which Bidirectional Encoder Representations from Transformers (BERT)-based topic modeling and information retrieval are applied to a relevant set of documents in order to support the development of a fishbone diagram in a semiautomated process. High-level themes in the document set are identified using topic modeling, which are then refined and interpreted by a human analyst. Then, the themes are used to guide a finer search using information retrieval, which returns specific incident reports of relevance. This provides traceability to specific incidents as well as broader categorizations that comprise the fishbone branches. We apply the proposed process to relevant documents from NASA’s Aviation Safety Reporting System (ASRS). The proposed process is widely applicable when relevant documents are available, and the results from this study will be useful to identifying potential causes of wildfire response UAS incidents.

hazard analysis↗

BERT-Based Topic Modeling and Information Retrieval to Support Fishbone Diagramming for Safe Integration of Unmanned Aircraft Systems in Wildfire Response

Recent concepts for emerging wildfire response operations have included unmanned aircraft systems (UAS) due to their increasing accessibility and capabilities. To integrate UAS into wildfire response safely, researchers have studied the use of large repositories of historic incident reports to improve the scope of root cause analysis. Recent work has emphasized applying state-of-the-art natural language processing techniques to extract useful information from these repositories. However, it has not yet been studied how these results can be interpreted and integrated into the systems engineering process. In this work, we propose a process in which Bidirectional Encoder Representations from Transformers (BERT)-based topic modeling and information retrieval are applied to a relevant set of documents in order to support the development of a fishbone diagram in a semiautomated process. High-level themes in the document set are identified using topic modeling, which are then refined and interpreted by a human analyst. Then, the themes are used to guide a finer search using information retrieval, which returns specific incident reports of relevance. This provides traceability to specific incidents as well as broader categorizations that comprise the fishbone branches. We apply the proposed process to relevant documents from NASA’s Aviation Safety Reporting System (ASRS). The proposed process is widely applicable when relevant documents are available, and the results from this study will be useful to identifying potential causes of wildfire response UAS incidents.

Hazard analysis↗

Analysis of Input from Wildfire Incident Experts to Identify Key Risks and Hazards in Wildfire Emergency Response

The United States Department of Agriculture (USDA) describes wildland fires as, “a force of nature that can be nearly as impossible to prevent, and as difficult to control, as hurricanes, tornadoes and floods.” Existing challenges in managing wildland fires often put first responders’ lives at risk. The emergence of drones and their capabilities to supplement human efforts could alleviate some, if not all, of those risks that first responders face during wildfire management efforts. However, the process of adding drones to wildfire response has come with its own challenges as well. NASA’s System-Wide Safety Project is working towards overcoming these challenges to enable routine transfer of risk from responders to aviation assets. The concept of operations and model-based systems engineering (MBSE) effort for this shift is underway. To inform and to validate the MBSE effort, we delivered a questionnaire to wildland firefighting experts on the hazards they currently face. This questionnaire has given us insight and a better understanding of the challenges related to the use of drones from a first responder’s point of view. We are using this information to better address responders’ concerns, develop a safety management system, and eliminate the roadblocks that prevent the use of drones in wildfire management.

Wildfire↗

COMPTEL neutron response at 17 MeV

The Compton imaging telescope (COMPTEL) instrument of the Gamma Ray Observatory was exposed to 17 MeV d,t neutrons prior to launch. These data were analyzed and compared with Monte Carlo calculations using the MCNP(LANL) code. Energy and angular resolutions are compared and absolute efficiencies are calculated at 0 and 30 degrees incident angle. The COMPTEL neutron responses at 17 MeV and higher energies are needed to understand solar flare neutron data.

Oneill, Terrence J.↗

Signal-Induced Noise Effects in a Photon Counting System for Stratospheric Ozone Measurement

Signal-induced noise (SIN) is a common effect resulting when a photomultiplier tube (PMT) is saturated, for a brief moment, with a high intensity light pulse. After the laser pulse is sent into the atmosphere a very large light return, from either the near-field or a cloud, causes the PMT to momentarily saturate. The PMT is gated off at this time so no signal is seen at the anode. When the PMT gate is turned on, the far-field light return from the atmosphere is observed. This signal is distorted, however because of the addition of SIN to the received light signal causing a slower than expected decay of the atmospheric signal return. We have characterized SIN responses to varying parameters of the incident light on the PMT. These varied parameters included incident wavelength, PMT voltage, incident intensity, and tube type. We found that only the amplitude of the SIN was effected by varying PMT voltages and light intensities. The amplitude increased linearly as input light intensity increased. Different incident wavelengths at the same intensity did not effect the amplitude or the temporal behavior of the SIN response. Finally, different PMT tubes with similar physical structures exhibited similar SIN responses although with different amplitudes. The different amplitudes can be attributed to the different gains and operating voltages of each tube. These results suggest that SIN is caused by photocathode electron dynamics such as charge accumulation on internal PMT surfaces. These surfaces then emit the electrons slowly resulting in a long decay noise signal. With the SIN responses characterized we can now try to develop a method to reduce or eliminate SIN in DIAL systems.

Harper, David B.↗

Reflective overcoats for radiation control surfaces

Theoretical models are developed to predict the surface properties of a coating layer composed of particles of a known size distribution, applied to an opaque substrate, such as a metal or reaction cured glass (RCG). The surface temperature attained at radiative equilibrium by an overcoated surface subject to a given heat flux is calculated. The incident radiation was assumed to exhibit the spectral distribution characteristic of a black body at different temperatures or equivalently, having different peak wavelengths, with the energy level scaled to give a range of desired surface radiative heat fluxes. This approach allows a straightforward comparison of the thernal response of a surface to incident radiation having the energy predominantly in a characteristic wavelength band and a well-defined spectral distribution. The ratio of the radiative heat flux to the total heat flux was varied, and the different geometric and material parameters of such overcoat layers were explored. The model was applied to representative surface heating rates to the Aeroasssisted Flight Experiment (AFE) and to Aeroassisted Space Transfer Vehicles (ASTVs). The predicted radiative energy flux to the surface of the AFE vehicle gives a single-point comparison of the surface temperatures attained with and without a selective-reflector overcoat on the vehicle surface. The specific objective of this work is to identify the most desirable radiative properties of an overcoat/substrate system for this environment.

White, Susan M.↗

The Focusing Optics X-Ray Solar Imager: FOXSI

The Focusing Optics x-ray Solar Imager (FOXSI) is a sounding rocket payload funded under the NASA Low Cost Access to Space program to test hard x-ray (HXR) focusing optics and position-sensitive solid state detectors for solar observations. Today's leading solar HXR instrument, the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) provides excellent spatial (2 arcseconds) and spectral (1 keV) resolution. Yet, due to its use of an indirect imaging system, the derived images have a low dynamic range (typically <10) and sensitivity. These limitations make it difficult to study faint x-ray sources in the solar corona which are crucial for understanding the particle acceleration processes which occur there. Grazing-incidence x-ray focusing optics combined with position-sensitive solid state detectors can overcome both of these limitations enabling the next breakthrough in understanding impulsive energy release on the Sun. The FOXSI project is led by the Space Sciences Laboratory at the University of California, Berkeley. The NASA Marshall Space Flight Center is responsible for the grazing-incidence optics, while the Astro-H team at JAXA/ISAS has provided double-sided silicon strip detectors. FOXSI is a pathfinder for the next generation of solar hard x-ray spectroscopic imagers. Such observatories will be able to image the non-thermal electrons within the solar flare acceleration region, trace their paths through the corona, and provide essential quantitative measurements such as energy spectra, density, and energy content in accelerated electrons.

Krucker, Saem↗

Potential application of satellite radar to monitor soil moisture

The microwave backscattering characteristics of soils as a function of moisture content are reviewed as a basis for the evaluation of the applicability of satellite radar to soil moisture determinations. Results of experiments showing the dependence of the complex dielectric constant, power reflection coefficient and backscattering coefficient of soil on its volumetric moisture content are presented. Results of a research program using the truck-mounted University of Kansas microwave active spectrometer to determine if, by the proper choice of sensor frequency, polarization and incidence, the sensor dynamic range in response to moisture variations may be greater than its response to other variations are considered in detail, and the optimum conditions of frequency (between 4 and 5 GHz), angular incidence (between 7 and 20 deg from nadir) and polarization (HH) obtained are indicated. An empirical model for the backscattering coefficient as a function of gravimetric moisture content derived on the basis of the experimental data is presented, and it is noted that available airborne and spaceborne data confirm the results of the ground-based sensors.

Ulaby, F. T.↗

L-Band H Polarized Microwave Emission During the Corn Growth Cycle

Hourly L-band (1.4 GHz) horizontally (H) polarized brightness temperatures (T(sub B))'s measured during five episodes (more than two days of continuous measurements) of the 2002 corn growth cycle are analyzed. These T(sub B)'s measurements were acquired as a part of a combined active/passive microwave field campaign, and were obtained at five incidence and three azimuth angles relative to the row direction. In support of this microwave data collection, intensive ground sampling took place once a week. Moreover, the interpretation of the hourly T(sub B)'s could also rely on the data obtained using the various automated instruments installed in the same field. In this paper, the soil moisture and temperature measured at fixed time intervals have been employed as input for the tau-omega model to reproduce the hourly T(sub B). Through the calibration of the vegetation and surface roughness parameterizations, the impact of the vegetation morphological changes on the microwave emission and the dependence of the soil surface roughness parameter, h(sub r), on soil moisture are investigated. This analysis demonstrates that the b parameter, appearing in the representation of the canopy opacity, has an angular dependence that varies throughout the growing period and also that the parameter hr increases as the soil dries in a portion of the dry-down cycle. The angular dependence of the b parameter imposes the largest uncertainty on T(sub B) simulations near senescence as the response of b to the incidence is also affected by the crop row orientation. On the other hand, the incorporation of a soil moisture dependent h(sub r) parameterization was responsible for the largest error reduction of T(sub B) simulations in the early growth cycle.

Joseph, A. T.↗

Gated-Dynode Photomultiplier Tube Assembly for the Boronated Scintillator Detector of the ISS-CREAM Experiment

We present the design of a four-photomultiplier tube (PMT) assembly for measuring light generation in theBoronated Scintillator Detector (BSD) of the Cosmic Ray Energetics And Mass experiment for the InternationalSpace Station (ISS-CREAM). The light produced in the scintillator includes a contribution from the captureof thermalized neutrons produced in cosmic ray interactions, as well as delayed fluorescence, in the range ofseveral microseconds following the incident cosmic ray impact. The BSD is held in an insensitive state until acosmic-ray trigger causes a rapid turn on of the PMTs to detect late light signals, several microseconds afterthe trigger. The design includes two pulsed high-voltage supplies, which serve to gate the first two dynodesof the Hamamatsu R1924A PMTs used in the assembly. When the dynode gates are held in the "off" state,this scheme is shown to suppress >105 photons from injection into the tube's multiplier stage, while beingcapable of rapid switching into a stable operating mode in less than 1 s. This mitigates any backgroundsfrom afterpulsing that might otherwise be present in the PMT response following the cosmic ray incidence.

Anderson, T.↗

Historical Study of Radiation Exposures and the Incidence of Cataracts in Astronauts

For over 35 years, astronauts in low Earth orbit or on missions to the moon have been exposed to space radiation comprised of high-energy protons, heavy ions, and secondary neutrons. We reviewed the radiation exposures received by astronauts in space and on Earth, and presented results from the first epidemiological study of cataract incidence in the astronauts. Our data suggested an increased risk for cataracts from space radiation exposures. Using parametric survival analysis and the maximum likelihood method, we estimated the dose-response and age distribution for cataract incidence in astronauts by space radiation. Considering the high-LET dose contributions on specific space missions as well as data from animal studies with neutrons and heavy ions, suggested a linear response with no dose-threshold for cataracts. However, there are unanswered questions related to the importance and the definition of clinically significant cataracts commonly used in radiation protection, especially in light of epidemiological data suggesting that the probability that sub-clinical cataracts will progress is highly dependent on the age at which cataracts appear. We briefly describe a new study that will address the measurement of cataract progression-rates in astronauts and a ground-based comparison group.

Cucinotta, F. A.↗

Historical Study of Radiation Exposures and the Incidence of Cataracts in Astronauts

For over 35 years, astronauts in low Earth orbit or on missions to the moon have been exposed to space radiation comprised of high-energy protons, heavy ions, and secondary neutrons. We reviewed the radiation exposures received by astronauts in space and on Earth, and presented results from the first epidemiological study of cataract incidence in the astronauts. Our data suggested an increased risk for cataracts from space radiation exposures*. Using parametric survival analysis and the maximum likelihood method, we estimated the dose-response and age distribution for cataract incidence in astronauts by space radiation. Considering the high-LET dose contributions on specific space missions as well as data from animal studies with neutrons and heavy ions, suggested a linear response with no dose-threshold for cataracts. However, there are unanswered questions related to the importance and the definition of "clinically significant" cataracts commonly used in radiation protection, especially in light of epidemiological data suggesting that the probability that "sub-clinical" cataracts will progress is highly dependent on the age at which cataracts appear. We briefly describe a new study that will address the measurement of cataract progression-rates in astronauts and a ground-based comparison group.

Cucinotta, F. A.↗

Characterizing Response Versus Scan-Angle for MODIS Reflective Solar Bands Using Deep Convective Clouds

MODIS consists of a cross-track, two-sided scan mirror, whose reflectance is not uniform but is a function of angle of incidence (AOI). This feature, known as response versusscan-angle (RVS), was characterized for all reflective solar bands of both MODIS instruments prior to launch. The RVS characteristic has changed on orbit, which must be tracked precisely over time to ensure the quality of MODIS products. The MODIS characterization support team utilizes the onboard calibrators and the earth view responses from multiple pseudo invariant desert sites to track the RVS changes at different AOIs. The drawback of using deserts is the assumption that these sites are radiometrically stable during the monitoring period. In addition, the 16-day orbit repeat cycle of MODIS allows for only a limited set of AOIs over a given desert. We propose a novel and robust approach of characterizing the MODIS RVS using tropical deep convective clouds (DCC). The method tracks the monthly DCC response at specified sets of AOIs to compute the temporal RVS changes. Initial results have shown that the Aqua-MODIS collection 6 band 1 level 1B radiances show considerable residual RVS dependencies, with long-term drifts up to 2.3 at certain AOIs.

Clouds↗

Orthostatic responses to dietary sodium restriction during heat acclimation

Several studies have shown that individuals consuming low-salt diets and working in the heat have an increased risk or incidence of heat injury, suggestive of inadequate cardiovascular adjustment. Furthermore, others have shown that prolonged work in hot climates can precipitate orthostatic hypotension and syncope. This study was designed to evaluate the effects of moderate-salt (MS) and low-salt (LS) diets on the circulatory responses and incidence of presyncopal symptoms to an orthostatic test (OT) during successive days of heat acclimation (HA). Seventeen unacclimatized male soldiers (mean +/- SE: age 20+/-1 yrs) participated in this two-phase study. The first phase consisted of a seven day dietary stabilization period during which all subjects consumed similar diets of about 4000 kcal/day containing 8g NaCl and lived in a dormitory setting (21 C, 30% RH). The second phase commenced on day eight and consisted of dietary NaCl restriction and 10 days HA (days 8-17). Volunteers were randomly assigned to either the MS diet (n=9) providing 8g NaCl/day or the LS diet (n=8) furnishing just 4g NaCl/day. The acquisition of HA was manifested in both groups by reductions in exercising rectal temperature and heart rate (HR); these characteristics were similar in the MS and LS diets. The OT was performed at 21 C on day seven of the stabilization phase and on days 9, 11, 13, 15, and 17 of the HA phase, before and after 8.5 hr of intermittent treadmill walking in a hot environment. Blood pressure (BP) and HR responses at 1,2, and 4 min and any presyncopal symptoms were recorded after assuming an upright position from recumbency. All subjects completed the OT before and after prolonged exercise in the heat without incidence of either hypotension or presyncopal symptoms irrespective of dietary-salt intake and day of HA. The results indicate that the prolonged work in the heat can be performed without orthostatic hypotension or syncope while consuming 4g NaCl/day with adequate fluid replacement. Furthermore, the circulatory responses to OT showed no improvement with successive days of HA irrespective of dietary-salt intake.

Szlyk, Patricia C.↗