Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “In situ”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Mars Biosignature - Detection Capabilities: A Method for Objective Comparison of In Situ Measurements and Sample Return

A Mars sample-return mission has been proposed within NASA's Mars Exploration Program. Studying Martian samples in laboratories on Earth could address many important issues in planetary science, but arguably none is as scientifically compelling as the question of whether biosignatures indicative of past or present life exist on that planet. It is reasonable to ask before embarking on a sample-return mission whether equivalent investigation of Martian biosignatures could be conducted in situ. This study presents an approach to (1)identifying an optimal instrument suite for in situ detection of biosignatures on Mars,and (2)comparing the projected confidence level of in situ detection in a 2026 timeframe to that of Earth-based analysis. We identify a set of candidate instruments, the development of which is projected to be achievable by 2026 well within a $200 million cost cap. Assuming that any biosignatures near the surface of Mars are similar to those of terrestrial life, we find that this instrument suite, if successfully developed and deployed, would enable in situ biosignature detection at essentially the same level of confidence as that of Earth-based analysis of the same samples. At a cost cap of half that amount,the confidence level of in situbiosignature detection analysis could reach about 90% that of Earth-based investigations.

National Environmental Policy Act (NEPA)↗
NASA NTRS2015

Exploration Architecture with Quantum Inertial Gravimetry and In-Situ ChipSat Sensors

The Dual Exploration Architecture is a mission concept that combines remote sensing and in-situ observations into a single mission to answer planetary science questions that can only be answered with both types of data. Adoption of dual exploration architectures may short circuit the long, slow cycle of missions to inaccessible bodies by eliminating the need for separate precursor and follow-up missions. Additionally, the dual architecture possesses inherent flexibility that enables the design of adaptive, event-driven missions that are very different from traditional, largely pre-planned missions. Five key observations about the state and trends of planetary science exploration lead us to the dual architecture: increasing complexity of observations; scarcity of future mission opportunities; desire to capture transitory events; continued miniaturization of spacecraft components; and the Mars exploration cycle. Our goal in this study is to explore missions that can only happen using the dual architecture concept and find technology development needs that must be filled for those missions to compete. A survey of historical and current missions finds that opportunities for exploration are becoming less frequent, causing the flexibility and dual-nature elements of each mission to become more common. The dual exploration architecture takes these trends to their far conclusion, attempting to eliminate precursor and follow-up missions while still returning more scientific payoff. A study of the future of planetary science goals through the decadal survey reveals broad applicability of dual missions to solve mysteries that cannot be answered with a traditional mission architecture. These missions fall into three broad classes: choosing a local target from a global survey; dynamic/reactive science; and global in-situ networks. Two example missions of each class are notionally described. A deeper look at these dual architecture classes reveals four technology development needs that must be addressed for wide adoption of dual missions: passive landers; guided atmospheric probes; robust sensing packages; and small, precise orbital instruments. This study pursues a specific focus on two examples of such enabling technologies: the ChipSat and cold atom gravimetry. The ChipSat is a fully functional spacecraft-on-a-chip system that has broad versatility in the dual architecture mission space. Initial studies show that ChipSats could survive as passive impactor landers on bodies up to the size of Europa. Furthermore, COTS (Commercial Off-The-Shelf) components could provide an in-situ sensor suite that readily answers a number of pressing planetary science questions. Cold atom gravimetry uses inertial sensors based on light-pulse atom interferometry in a small form factor to map the gravity field of a body to precision equaling what would normally require two full spacecraft to achieve. The cold atom gravimeter provides an example of how advanced remote sensing capability can enable dual missions by providing greater returns in a significantly smaller package. Using the above two technologies, we study an example dual-architecture mission to both characterize and sample the subsurface oceans at Europa. The greatest scientific return in terms of detecting extraterrestrial life is in those regions where Europa’s ice crust is thin. The identification of regions with thin ice should therefore precede the selection of surface targets and dispatch of probes to those targets. This two-step process, if accomplished by separate flagship-scale missions, might take decades. As a result, a combined mission to both identify thin areas of Europa’s ice and follow up with surface observations at those regions is a good candidate for the dual-exploration architecture. This example mission consists of an orbiter spacecraft carrying a cold atom gravimeter capable of sensing or inferring the ice thickness on regional to local scales, along with a number of ChipSat probes capable of landing on the moon. The small size and weight of the ChipSats allows large numbers of them to be carried, ensuring that enough can be dropped to ensure survival of a minimum number of probes and potentially allowing for the in-situ sampling of multiple locations on the moon. The example missions and Europa case study show that amazing scientific return can obtained from dual-exploration architecture missions with a single launch by breaking the long timescales of planetary exploration and providing the flexibility to capturing transitory events and collect data across the local, regional, and global scales.

Exploration↗
NASA NTRS2018

Quantifying Methane Leak Emissions by Fused Airborne Imaging Spectroscopy with in Situ Surface Mobile and Airborne Observations of a California Producing Oil Field

Methane (CH4) emission budgets remain uncertain and are projected to grow as oil and gas production from short-lived wells increases and their subsequent transport through aging gas distribution networks. Orders-of-magnitude variations in temporal, spatial, and emission scales present a key challenge to leak detection and quantification. Also, the probability distributions for large and stochastic, leaky systems such as geological reservoirs (by natural migration-seeps) and petroleum production from those reservoirs remain largely unknown, needed to address current approach limitations. The scale of many petroleum systems favors remote sensing, but the sensitivity of such systems often precludes detection of weak emissions. Consequently, an accurate evaluation requires that the relative contribution from the emission "tails" of small leaks also be quantified, which is best carried out using high-sensitivity in situ methods. Fusion of remote sensing and in situ approaches leverages complementary capabilities to address these limitations. We show results from mobile surface (AMOG) and airborne in situ (AJAX) and thermal-infrared (TIR) hyperspectral imaging spectroscopy (Mako) data applied to a producing oil field in the California Central Valley near Bakersfield. AMOG is an automobile-based mobile lab that measures 13 trace gases, aerosol size distributions and vertical profiles, 3D winds and other meteorology, and atmospheric column measurements by solar spectroscopy at highway speeds. AJAX measures 5 trace gases and 3D winds at ~140 m/s. Mako is a broad-area TIR imaging spectrometer that can discriminate multiple gases present in each pixel acquired. In situ-derived, total field emissions were 31±16 Gg/yr CH4. This was compared with Mako-derived emissions from all plumes identified across the study site. We found that super-emitters were not the dominant emissions mode and the spatial pattern of plume locations from production infrastructure was correlated to geological structures.

Leifer, Ira↗
NASA NTRS2021

Validation of IASI Satellite Ammonia Observations at the Pixel Scale Using In Situ Vertical Profiles

Satellite ammonia (NH 3 ) observations provide unprecedented insights into NH3 emissions, spatiotemporal variabilities and trends, but validation with in situ measurements remains lacking. Here, total columns from the Infrared Atmospheric Sounding Interferometer (IASI) were intercompared to boundary layer NH 3 profiles derived from aircraft- and surface-based measurements primarily in Colorado, USA, in the summer of 2014. IASI-NH 3 version 3 near real-time data set compared well to in situ derived columns (windows ±15 km around centroid, ±1 h around overpass time) with a correlation of 0.58, a slope of 0.78 ± 0.14 and an intercept of 2.1 × 10 15 ±1.5 × 10 15 molecules cm −2 . Agreement degrades at larger spatiotemporal windows, consistent with the short atmospheric lifetime of NH 3 . We also examined IASI version 3R data, which relies on temperature retrievals from the ERA Reanalysis, and a third product generated using aircraft-measured temperature profiles. The overall agreement improves slightly for both cases, and neither is biased within their combined measurement errors. Thus, spatiotemporal averaging of IASI over large windows can be used to reduce retrieval noise. Nonetheless, sampling artifacts of airborne NH 3 instruments result in significant uncertainties of the in situ-derived columns. For example, large validation differences exist between ascent and descent profiles, and the assumptions of the free tropospheric NH 3 profiles used above the aircraft ceiling significantly impact the validation. Because short-lived species like NH 3 largely reside within the boundary layer with complex vertical structures, more comprehensive validation is needed across a wide range of environments. More accurate and widespread in situ NH 3 data sets are therefore required for improved validations of satellite products.

Ammonia↗
NASA NTRSDate not supplied

The Relationship Of Size Distributions To Spectral (300 - 700 Nm) Extinction Parameterization Of Ambient In Situ Aerosols Measured During FIREX-AQ And The Influence Of Aerosol Composition

Hyperspectral (300 - 700 nm, 0.7 nm resolution) aerosol extinction spectra were measured at seven fires in six states in the western United States during the Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) field campaign in July and August 2019. Obtained using an in situ aerosol sampling method, these spectra are directly comparable to other in situ aerosol measurements such as size distribution and composition. A previous deployment of the in situ Spectral Aerosol Extinction (SpEx) instrument that measured fine mode aerosols (50% size cut of 1.3 µm particle diameter) around the Korean peninsula showed that over this spectral range 2nd order polynomials provided a better fit to the logarithmically transformed spectra than linear fits (representative of Ångström exponents). The two fit parameters (a1, a2) of the polynomials are related to the classic Ångström exponent but provide additional information via their two-dimensional parameter space. The previous work was limited by the lack of commensurate size distribution information. Here, using the FIREX-AQ spectra set it is possible to expand on the previous analysis in three specific ways: 1) size distribution information is available to further elucidate how size distribution maps into (a1, a2) space, 2) the sampled size distributions include larger particles than the Korean study, and 3) the FIREX-AQ data set exhibits smoke-related spectral features in the UV part of the spectrum that are not present in background air nor were they observed previously in the Korean study. The UV spectral features are particularly intriguing as they likely arise from the absorption component of the extinction measurement and therefore may be related to composition. The relationships between the ambient in situ aerosol size distributions, the extinction spectra, and composition will be presented.

Carolyn Jordan↗
NASA NTRS2022

Midwest Water Resources II: Evaluating Evapotranspiration with NASA Earth Observations and In Situ Observations to Understand Water Balance in Midwest Agriculture

Seasonal water variability in the midwestern United States extensively affects the agricultural community, as it impacts irrigation schedules, growing seasons, and overall ecosystem function. Evapotranspiration (ET) is a critical climatic variable in the water cycle and is used to evaluate spatiotemporal trends in drought and flood conditions. The NASA DEVELOP team partnered with the United States Department of Agriculture (USDA) Midwest Climate Hub, the Minnesota Department of Agriculture, the Illinois State Water Survey, and Michigan State University to compare remotely sensed ET products with in situ observations from January 2001 through December 2020. Remotely sensed actual ET (aET) data were sourced from NASA’s Terra Moderate Resolution Imaging Spectroradiometer (MODIS), and reference ET (refET) data were derived from the Gridded Surface Meteorological (gridMET) dataset. For in situ comparison, aET data were downloaded from the AmeriFlux database while refET data were collected from the Illinois Climate Network and Michigan State University’s Enviro-weather database. For a holistic assessment of ET, this project generated comparisons between remotely sensed and in situ observations, calculated descriptive statistics for validation between refET datasets, and spatially produced statistical validation maps regarding in situ sites. The temporal and spatial gaps of AmeriFlux data limited aET analysis. This comparative assessment of ET products across the Midwest can be used by project partners to assess regional water trends and guide future land management decisions.

Addison Pletcher↗
NASA NTRSDate not supplied

Joint Assimilation of Surface, GEO, and LEO CO, NO2, and O3 In Situ and Partial Column/Profile Retrievals with WRF-Chem/DART

Low earth orbiting (LEO) satellites like OMI or TROPOMI and geostationary satellites like TEMPO (to be launched January 2023) provide ozone (O3) retrieval profiles that extend into the stratosphere. Regional models like WRF-Chem generally do not include the stratosphere and have vertical grids that end near the tropopause. This causes difficulties when assimilating O3 retrievals (both column and profile retrievals) because the respective observation forward operators require model O3 profiles that extend into the stratosphere. In this presentation, we look at results from assimilating O3 observation from surface (in situ measurements), multiple LEO (profile retrievals), and GEO (proxy profile retrievals) platforms in as regional model where we use a global chemical transport model (GCTM) to provide O3 upper boundary conditions (BCs) to enable application of the O3 observation forward operators. We will also present results from assimilating O3 retrievals together with carbon monoxide (CO) observations from surface (in situ measurements) and multiple LEO platforms (column and profile retrievals), and nitrogen dioxide (NO2) observations from surface (in situ measurements), multiple LEO (column retrievals), and GEO (proxy column retrievals) platforms. Our joint assimilation experiments show that sometimes the observations complement each, e.g., when assimilating surface and satellite CO or NO2 observations, and sometimes the observations conflict with each other, e.g., when assimilating observations that are biased with respect to other observations (e.g., CO retrievals), or when the assimilation increments conflict due to their chemical interaction (e.g., surface O3 and NO2 retrievals). Results from assimilation of O3 retrieval profiles in regional model are preliminary and will also be discussed in our presentation. Our expectation is that using GCTM O3 as upper BCs in the regional model for evaluation of the O3 forward operator will improve our O3 forecasts. In summary, we will present results from jointly assimilating surface, LEO, and GEO CO, NO2, and O3 in situ and satellite observations in a regional model with dynamic emissions estimation. This study uses proxy GEO observations as a prelude to actual observations because the GEO platform will not be launched until after our presentation.

WRF-Chem/DART↗
NASA NTRSDate not supplied

In-Situ Process Monitoring, Synchronization, and Mapping Laser Powder Bed Fusion Builds of Ti6Al4V

The use of in-situ process monitoring is of interest to lower the cost of inspection for the qualification of laser powder bed fusion (LPBF) parts. Precise monitoring of the LPBF-AM build process constitutes a multi-scale and multi-discipline task. There are several significant challenges to the in-situ approach: the synchronization of sensor signals to process steps, the physical interpretation and classification of sensor signals, managing very large datasets, and comparing the inputs with the observed monitoring signals. At NASA Langley Research Center, a configurable architecture additive testbed has been developed to monitor the build process with synchronized sensors. The philosophy and method adopted for the synchronization of the cameras with laser power & position Ti-6Al-4V LPBF are described. The synchronized in-situ monitoring signals are compared with ex-situ nondestructive inspection and optical microscopy observations. Such comparisons permit a better understanding of how the sequential process actions of LPBF-AM can affect build quality.

Laser Powder Bed Fusion↗
NASA NTRSDate not supplied

Satellite-Assisted Particulate Matter (SAPM) for the Models, In situ, and Remote sensing of Aerosols (MIRA) Working Group

Models, In situ, and Remote sensing of Aerosols (MIRA) is an international working group that aims to foster collaborations amongst these three major aerosol specialties. It consists of a collection of interdisciplinary and independently funded projects/topics with clearly-defined goals. Currently there are four MIRA topic areas, including Satellite-Assisted Particulate Matter (SAPM), which is focused specifically on fine particulate matter (PM2.5). The study of PM2.5 is important due to its significant contribution to air pollution and resultant, adverse human health effects. The goal of the SAPM topic group is to conduct and provide intercomparisons of various methods and techniques to obtain surface PM2.5 estimates assisted by satellite remote sensors, global aerosol models, and in situ aerosol measurements. Some benefits of space-based/model-assisted PM2.5 retrievals include providing PM2.5 approximations in regions with poor in situ ground station coverage and a means for assessing spatial/temporal PM2.5 variations on regional and/or global scales. Furthermore, benefits of spaceborne lidar/model-assisted PM2.5 retrievals include providing nighttime PM2.5 estimates and characterization of near-surface aerosol vertical structure. SAPM is seeking international datasets of mass scattering/absorption coefficient and aerosol hygroscopic properties for different aerosol species, as well as ground-based in situ PM2.5 measurements. In this poster presentation, we give an overview of SAPM, and show results from three recent/ongoing PM2.5 studies. These efforts involve deriving surface PM2.5 concentrations from two spaceborne lidars, the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and Cloud-Aerosol Transport System (CATS), and investigating key variables that impact the estimation of PM2.5 from model simulated aerosol optical depth (AOD) using the Goddard Earth Observing System (GEOS) model.

Travis D. Toth↗
NASA NTRS2011

In Situ Validation of the Soil Moisture Active Passive (SMAP) Satellite Mission

SMAP is a new NASA mission proposed for 2014 that would provide a number of soil moisture and freeze/thaw products. The soil moisture products span spatial resolutions from 3 to 40 km. In situ soil moisture observations will be one of the key elements of the validation program for SMAP. Data from the currently available set of soil moisture observing sites and networks need improvement if they are to be useful. Problems include a lack of standardization of instrumentation and installation and the disparity in spatial scale between the point-scale in situ data (a few centimeters) and the coarser satellite products. SMAP has initiated activities to resolve these issues for some of the existing resources. The other challenge to soil moisture validation is the need to expand the number of sites and their geographic distribution. SMAP is attempting to increase the number of sites and their value in validation through collaboration. The issues and solutions involving in situ validation being investigated will be described along with recent results from SMAP validation projects.

validation↗
NASA NTRS2016

Sample Handling and Instruments for the In-Situ Exploration of Ice-Rich Planets

NASA's key science goals for the exploration of the solar system seek a better understanding of the formation and evolutionary processes that have shaped planetary bodies and emphasize the search for habitable environments. Efforts are also made to detect and quantify resources that could be used for the support of human exploration. These themes call for chemistry and physical property observations that may be best approached by in situ measurements. NASA's planetary missions have progressively evolved from remote reconnaissance to in situ exploration with the ultimate goal to return samples. This chapter focuses on the techniques, available or in development, for advanced geophysical and chemical characterization of icy bodies, especially Mars polar areas, Enceladus, Titan, Europa, and Ceres. These astrobiological targets are the objects of recent or ongoing exploration whose findings are driving the formulation of new missions that involve in situ exploration. After reviewing the overall objectives of icy body exploration (Section 9.1) we describe key techniques used for addressing these objectives from surface platforms via geophysical observations (Section 9.2) and chemical measurements (Section 9.3).

planets↗
NASA NTRS2024

Variability and Distribution of Nighttime Equatorial to Mid Latitude Ionospheric Irregularities and Vertical Plasma Drift Observed by FORMOSAT-5 Advanced Ionospheric Probe In-Situ Measurements from 2017 – 2020

Irregularities in ionospheric plasma distribution can result in severe scintillation and disruption to the radio frequencies utilized for satellite communications and navigation. In the low and mid latitudes, these irregularities can include Equatorial Plasma Bubbles (EPBs) and Travelling Ionospheric Disturbances (TIDs). EPBs are irregularities manifesting in low latitude nighttime ionosphere plasma density that can extend along magnetic field lines with zonal scales on the order of 100 km or less, while TIDs are propagating wave disturbances. High frequency in-situ measurements of ionospheric plasma aboard spacecraft in Low Earth Orbit (LEO) are a direct measurement of irregularities in plasma density and are therefore valuable for resolving EPB and TID occurrences, variability, and relation to other ionospheric parameters that are believed to play a driving role in the formation of such irregularities. In this study, we utilize observations taken over a three-year period between 2017 and 2020 by the Advanced Ionospheric Probe (AIP) carried aboard the FORMOSAT-5 satellite to examine the spatial, seasonal, and interannual variability of equatorial to mid latitude ionospheric irregularities and vertical ion drift during this time. AIP provides in-situ measurements of ion density and vertical ion drift in the equatorial to mid latitude ionosphere at approximately 720 km altitude with local times between 22:00 – 23:00 local time. Our global scale results resolve distinct and inter-annually recurrent seasonal patterns in the distribution of nighttime ionospheric irregularities and vertical plasma drift during this time. Elevated occurrences of ion density irregularities are resolved along the Equatorial Ionization Anomaly (EIA) latitudes, while notable occurrences with variability consistent with EPBs also observed along the low and equatorial magnetic latitudes. Zonal variability of equatorial irregularities consistent with the signatures of nonmigrating atmospheric tides are observed. It is also notable that the occurrences and geographic distribution of ion density irregularities showed a considerable level of interannual variability, especially at mid latitudes over the South Atlantic and Southern African sectors, which showed much higher levels of irregularities in 2017–––2018, compared to 2019 and 2020. In comparison, the spatial and interannual variation of the co-located vertical ion drifts were much more consistent during the years examined, indicating that the driver for the observed interannual variability in ion density irregularities cannot be attributed to the vertical ion drift at the same time and location of the observations. This highlights the need for in-situ instruments distributed across multiple satellites in different local time zones.

ionosphere↗
NASA NTRS1976

The development of an electrochemical technique for in situ calibrating of combustible gas detectors

A program to determine the feasibility of performing in situ calibration of combustible gas detectors was successfully completed. Several possible techniques for performing the in situ calibration were proposed. The approach that showed the most promise involved the use of a miniature water vapor electrolysis cell for the generation of hydrogen within the flame arrestor of a combustible gas detector to be used for the purpose of calibrating the combustible gas detectors. A preliminary breadboard of the in situ calibration hardware was designed, fabricated and assembled. The breadboard equipment consisted of a commercially available combustible gas detector, modified to incorporate a water vapor electrolysis cell, and the instrumentation required for controlling the water vapor electrolysis and controlling and calibrating the combustible gas detector. The results showed that operation of the water vapor electrolysis at a given current density for a specific time period resulted in the attainment of a hydrogen concentration plateau within the flame arrestor of the combustible gas detector.

Shumar, J. W.↗
NASA NTRS1981

In situ correlative measurements for the ultraviolet differential absorption lidar and the high spectral resolution lidar air quality remote sensors: 1980 PEPE/NEROS program

In situ correlative measurements were obtained with a NASA aircraft in support of two NASA airborne remote sensors participating in the Environmental Protection Agency's 1980persistent elevated pollution episode (PEPE) and Northeast regional oxidant study (NEROS) field program in order to provide data for evaluating the capability of two remote sensors for measuring mixing layer height, and ozone and aerosol concentrations in the troposphere during the 1980 PEPE/NEROS program. The in situ aircraft was instrumented to measure temperature, dewpoint temperature, ozone concentrations, and light scattering coefficient. In situ measurements for ten correlative missions are given and discussed. Each data set is presented in graphical and tabular format aircraft flight plans are included.

Gregory, G. L.↗
NASA NTRS1982

In situ ozone data for comparison with laser absorption remote sensor: 1980 PEPE/NEROS program

Several sets of in situ ozone (O3) measurements were made by a NASA aircraft in support of the laser absorption spectrometer (LAS) remote sensor. These measurements were designed to provide comparative O3 data for the LAS sensor. The LAS, which was flown on a second aircraft, remotely measured the vertical burden of O3 from the aircraft to the surface. In situ results of the air quality (O3 and B sub scat) and meteorological (temperature and dewpoint) parameters for three correlative missions are presented. The aircraft flight plans, in situ concentration profiles and vertical burdens, and measurement errors are summarized.

Mcdougal, D. S.↗
NASA NTRS1983

The in situ transverse lamina strength of composite laminates

The objective of the work reported in this presentation is to determine the in situ transverse strength of a lamina within a composite laminate. From a fracture mechanics standpoint, in situ strength may be viewed as constrained cracking that has been shown to be a function of both lamina thickness and the stiffness of adjacent plies that serve to constrain the cracking process. From an engineering point of view, however, constrained cracking can be perceived as an apparent increase in lamina strength. With the growing need to design more highly loaded composite structures, the concept of in situ strength may prove to be a viable means of increasing the design allowables of current and future composite material systems. A simplified one dimensional analytical model is presented that is used to predict the strain at onset of transverse cracking. While it is accurate only for the most constrained cases, the model is important in that the predicted failure strain is seen to be a function of a lamina's thickness d and of the extensional stiffness bE theta of the adjacent laminae that constrain crack propagation in the 90 deg laminae.

Flaggs, D. L.↗
NASA NTRS1982

Satellite-in situ measurement intercomparisons at Wallops Island, Virginia

A field program was carried out at Wallops Island, Virginia in which a number of in situ soundings were made during February to May 1980 in conjunction with near overpasses of NOAA-6. A comparison of NOAA-6 measured and derived quantities with those of in situ instruments was made. Positive temperature biases (satellite warmer) were found to appear in the lower troposphere and tropopause regions; negative differences generally were found to appear in the middle and upper stratosphere. Average geopotential height differences were relatively small at all levels, but increasing rms errors showed decreasing reliability with height of satellite geopotential heights. Satellite-derived geostrophic winds were found to have less shear than in situ determined winds. Bias in the directional differences was found to range from less than 5 deg to about 20 deg, with rms differences apparently decreasing near the level of wind speed.

Nestler, M. S.↗
NASA NTRS1984

In Situ Data

In-situ planetary data include all measurements made by a wide variety of instruments whose sensors are exposed directly to the planetry environment. Typical measurements include those of magnetic fields, energetic particle densities and energy distributions, plasma wave characteristics, ionospheric and neutral gas densities, temperatures, composition and motions. A large body of scientists in the United States, and the world, are involved in research using in-situ data. Many of these scientists are associated with Mission investigations groups which provide specific types of in-situ data. These groups, in the course of data analysis, use data provided by similar groups. The interdisciplinary nature of these investigations fosters exchange and reliance upon one another for data is heavy. To a lesser extent, correlative data sets are obtained from the National Space Science Data Center (NSSDC). However, the data entries often have limited temporal and spatial resolution, are of uncertain quality, and are usually available only for measurements that are several years old.

Source record↗