SEARCH · Engineering Papers

Results for “Ice”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS2018

Summary of Ice Shape Geometric Fidelity Studies on an Iced Swept Wing

Understanding the aerodynamic impact of swept-wing ice accretions is a crucial component of the design of modern aircraft. Computer-simulation tools are commonly used to approximate ice shapes, so the necessary level of detail or fidelity of those simulated ice shapes must be understood relative to high-fidelity representations of the ice. Previous tests were performed in the NASA Icing Research Tunnel to acquire high-fidelity ice shapes. Some of those ice shapes are based on aircraft certification requirements. From this database, full-span artificial ice shapes were designed and manufactured for both an 8.9%-scale and 13.3%-scale semispan wing model of the CRM65 which has been established as the full-scale baseline for this swept-wing project. These models were tested in the Walter H. Beech wind tunnel at Wichita State University and at the ONERA (Office national d'etudes et de recherches aerospatiales) F1 facility, respectively. The data collected in the Wichita State University wind tunnel provided a low-Reynolds number baseline study while the pressurized F1 facility produced data over a wide range of Reynolds and Mach numbers with the highest Reynolds number studied being approximately Re = 11.9 by 10 (sup 6). Three different fidelity representations were created based on three different icing conditions. Lower-fidelity ice shapes were created by lofting a smooth ice shape between cross-section cuts of the high-fidelity ice shape. Grit roughness was attached to this smooth ice shape as another fidelity variant. The data indicates that the geometric fidelity of the ice shapes resulted in significant differences in lift and drag. These results were similar at both facilities over the wide range of test conditions utilized.

Aerodynamics↗

NASA NTRS2019

Detailed infrared study of amorphous to crystalline propionitrile ices relevant to observed spectra of Titan's stratospheric ice clouds

We have conducted a comprehensive study of propionitrile (C2H5CN) ice from the amorphous to crystalline phase in order to provide detailed information on this specific cyanide, which may potentially contribute to the chemical composition of the Haystack ice cloud observed in Titan’s stratosphere by the Cassini Composite InfraRed Spectrometer (CIRS). Infrared transmission spectra of thin films of pure propionitrile ices deposited at low temperature (30 – 160 K) were collected from 50 cm-1 to 11,700 cm-1 (200 – 0.85 μm). The far-infrared spectral region was specifically targeted to compare with CIRS far-infrared limb spectra. The temperature and time evolution of C2H5CN ice was thoroughly investigated to better understand discrepancies reported in previously published laboratory studies on the crystalline phase of C2H5CN. Specifically, we observe peculiar temperature and time-driven ice phase transitions, revealed by significant spectral variations in the ice, which stabilizes once a complete crystalline phase is achieved. From these results, the crystalline phase of propionitrile ice was identified at deposition temperatures greater than or equal to 135 K and less than 140 K. Our findings corroborate previous studies that ruled out pure propionitrile ice as the sole chemical identity of Titan’s observed Haystack emission feature. As a result, we have initiated co-deposition experiments that incorporate mixtures of Titan-relevant organics, many of which have corresponding vapors that are abundantly present in Titan's stratosphere. In this paper, we present one example of a co-deposited trinary ice mixture containing 16% hydrogen cyanide (HCN), 23% C2H5CN, and 61% benzene (C6H6). Although this co-condensed ice mixture is a poor spectral match for the Haystack, it reveals an intriguing result: the strong lattice mode of pure C2H5CN ice is drastically altered by the surrounding molecules as a result of mixing in a co-condensed phase. The laboratory results reported here on propionitrile ice may help to further constrain the chemical identification of Titan’s stratospheric Haystack ice cloud, as well as improve on the current state of knowledge of Titan's stratospheric ice cloud chemistry.

Ices↗

DOE OSTI2024

The Effect of Physically Based Ice Radiative Processes on Greenland Ice Sheet Albedo and Surface Mass Balance in E3SM

Abstract A significant portion of surface melt on the Greenland Ice Sheet (GrIS) is due to dark ice regions in the ablation zone, where solar absorption is influenced by the physical properties of the ice, light absorbing constituents (LACs), and the overlying crustal surface or melt ponds. Earth system models (ESMs) typically prescribe the albedo of ice surfaces as a constant value in the visible and near‐infrared spectral regions. This work advances ESM ice radiative transfer modeling by (a) incorporating a physically based radiative transfer model (SNow, ICe and Aerosol Radiation model Adding‐Doubling Version 4; SNICAR‐ADv4) into the Energy Exascale Earth System Model (E3SM), (b) determining spatially and temporally varying bare ice physical properties over the GrIS ablation zone from satellite observations to inform SNICAR‐ADv4, and (c) assessing the impacts on simulated GrIS albedo and surface mass balance associated with modeling of more realistic bare ice albedo. GrIS‐wide bare ice albedo in E3SMv2 is overestimated by ∼4% in the visible and ∼7% in the near‐infrared wavelengths compared to the Moderate Resolution Imaging Spectroradiometer. Our bare ice physical property retrieval method found that LACs, ice crustal surfaces, and melt ponds reduce visible albedo by 30% in the bare ice region of the GrIS ablation zone. The realistic bare ice albedo reduces surface mass balance by ∼145 Gt, or 0.4 mm of sea‐level equivalent between 2000 and 2021 compared to the default E3SM. This work highlights the importance of simulating bare ice albedo accurately and realistically to improve our ability to quantify changes in the GrIS surface mass and radiative energy budgets.

58 GEOSCIENCES↗

DOE OSTI2023

Exploring ice sheet model sensitivity to ocean thermal forcing and basal sliding using the Community Ice Sheet Model (CISM)

Abstract. Multi-meter sea level rise (SLR) is thought to be possible within the next few centuries, with most of the uncertainty originating from the Antarctic land ice contribution. One source of uncertainty relates to the ice sheet model initialization. Since ice sheets have a long response time (compared to other Earth system components such as the atmosphere), ice sheet model initialization methods can have significant impacts on how the ice sheet responds to future forcings. To assess this, we generated 25 different ice sheet spin-ups, using the Community Ice Sheet Model (CISM) at a 4 km resolution. During each spin-up, we varied two key parameters known to impact the sensitivity of the ice sheet to future forcing: one related to the sensitivity of the ice shelf melt rate to ocean thermal forcing (TF) and the other related to the basal friction. The spin-ups all nudge toward observed thickness and enforce a no-advance calving criterion, such that all final spin-up states resemble observations but differ in their melt and friction parameter settings. Each spin-up was then forced with future ocean thermal forcings from 13 different CMIP6 models under the Shared Socioeconomic Pathway (SSP)5-8.5 emissions scenario and modern climatological surface mass balance data. Our results show that the effects of the ice sheet and ocean parameter settings used during the spin-up are capable of impacting multi-century future SLR predictions by as much as 2 m. By the end of this century, the effects of these choices are more modest, but still significant, with differences of up to 0.2 m of SLR. We have identified a combined ocean and ice parameter space that leads to widespread mass loss within 500 years (low friction and high melt rate sensitivity). To explore temperature thresholds, we also ran a synthetically forced CISM ensemble that is focused on the Amundsen region only. Given certain ocean and ice parameter choices, Amundsen mass loss can be triggered with thermal forcing anomalies between 1.5 and 2 ∘C relative to the spin-up. Our results emphasize the critical importance of considering ice sheet and ocean parameter choices during spin-up for SLR predictions and suggest the importance of including glacial isostatic adjustment in ice sheet simulations.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1986

Real-time measurement of ice growth during simulated and natural icing conditions using ultrasonic pulse-echo techniques

Results of tests to measure ice accretion in real-time using ultrasonic pulse-echo techniques are presented. Tests conducted on a 10.2 cm diameter cylinder exposed to simulated icing conditions in the NASA Lewis Icing Research Tunnel and on an 11.4 cm diameter cylinder exposed to natural icing conditions in flight are described. An accuracy of + or - 0.5 mm is achieved for real-time ice thickness measurements. Ice accretion rate is determined by differentiating ice thickness with respect to time. Icing rates measured during simulated and natural icing conditions are compared and related to icing cloud parameters. The ultrasonic signal characteristics are used to detect the presence of surface water on the accreting ice shape and thus to distinguish between dry ice growth and wet growth. The surface roughness of the accreted ice is shown to be related to the width of the echo signal received from the ice surface.

Hansman, R. J., Jr.↗

NASA NTRS1999

Ice Flow in the North East Greenland Ice Stream

Early observations with ERS-1 SAR image data revealed a large ice stream in North East Greenland (Fahnestock 1993). The ice stream has a number of the characteristics of the more closely studied ice streams in Antarctica, including its large size and gross geometry. The onset of rapid flow close to the ice divide and the evolution of its flow pattern, however, make this ice stream unique. These features can be seen in the balance velocities for the ice stream (Joughin 1997) and its outlets. The ice stream is identifiable for more than 700 km, making it much longer than any other flow feature in Greenland. Our research goals are to gain a greater understanding of the ice flow in the northeast Greenland ice stream and its outlet glaciers in order to assess their impact on the past, present, and future mass balance of the ice sheet. We will accomplish these goals using a combination of remotely sensed data and ice sheet models. We are using satellite radar interferometry data to produce a complete maps of velocity and topography over the entire ice stream. We are in the process of developing methods to use these data in conjunction with existing ice sheet models similar to those that have been used to improve understanding of the mechanics of flow in Antarctic ice streams.

Joughin, Ian↗

NASA NTRS2002

Ice Shelves and Landfast Ice on the Antarctic Perimeter: Revised Scope of Work

Ice shelves respond quickly and profoundly to a warming climate. Within a decade after mean summertime temperature reaches approx. O C and persistent melt pending is observed, a rapid retreat and disintegration occurs. This link was documented for ice shelves in the Antarctic Peninsula region (the Larsen 'A', 'B' and Wilkins Ice shelves) by the results of a previous grant under ADRO-1. Modeling of ice flow and the effects of meltwater indicated that melt pending accelerates shelf breakup by increasing fracture penetration. SAR data supplemented an AVHRR- and SSM/I-based image analysis of extent and surface characteristic changes. This funded grant is a revised, scaled-down version of an earlier proposal under the ADRO-2 NRA. The overall objective remains the same: we propose to build on the previous study by examining other ice shelves of the Antarctic and incorporate an examination of the climate-related characteristics of landfast ice. The study now considers just a few shelf and fast ice areas for study, and is funded for two years. The study regions are the northeastern Ross Ice Shelf, the Larsen 'B' and 'C' shelves, fast ice and floating shelf ice in the Pine Island Glacier area, and fast ice along the Wilkes Land coast. Further, rather than investigating a host of shelf and fast ice processes, we will home in on developing a series of characteristics associated with climate change over shelf and fast ice areas. Melt pending and break-up are the end stages of a response to a warming climate that may begin with increased melt event frequency (which changes both albedo and emissivity temporarily), changing firn backscatter (due to percolation features), and possibly increased rifting of the shelf surface. Fast ice may show some of these same processes on a seasonal timescale, providing insight into shelf evolution.

Scambos, Ted↗

NASA NTRS2006

Contrasts in Sea Ice Formation and Production in the Arctic Seasonal and Perennial Ice Zones

Four years (1997-2000) of RADARSAT Geophysical Processor System (RGPS) data are used to contrast the sea ice deformation and production regionally, and in the seasonal (SIZ) and perennial (PIZ) ice zones. Ice production is of seasonal ice in openings during the winter. 3-day estimates of these quantities are provided within Lagrangian elements initially 10 km on a side. A distinct seasonal cycle is seen in both zones with these estimates highest in the late fall and with seasonal minimums in the mid-winter. Regional divergence over the winter could be up to 30%. Spatially, the highest deformation is in the SIZ north of coastal Alaska. Both ice deformation and production are higher in the SIZ: deformation-related ice production in the SIZ (approx.0.5 m) is 1.5-2.3 times that of the PIZ (approx.0.3 m) - this is connected to ice strength and thickness. Atmospheric forcing and boundary layer structure contribute to only the seasonal and interannual variability. Seasonal ice growth in ice fractures accounts for approx.25-40% of the total ice production of the Arctic Ocean. By itself, this deformation-ice production relationship could be considered a negative feedback when thickness is perturbed. However, the overall effect on ice production in the face of increasing seasonal and thinner/weaker ice coverage could be modified by: local destabilization of the water column promoting overturning of warmer water due to increased brine rejection; and, the upwelling of the pynocline associated with increased occurrence of large shear motion in sea ice.

Kwok, R.↗

NASA NTRS2010

Analysis of Ice Plains of Filchner/Ronne Ice Shelf Using ICESat Data

We use repeat-track laser altimeter data from the Ice, Cloud, and land Elevation Satellite (ICESat) to map the grounding zone of Filchner/Ronne Ice Shelf (FRIS), Antarctica. Repeated passes of ICESat reveal ice flexure in the grounding zone occurs as the ice shelf responds to ocean height changes due primarily to tides. In the course of our mapping, we have confirmed or identified three major "ice plains", regions of low surface slope near the GZ where the ice is close to hydrostatic equilibrium: one on Institute Ice Stream, another to its east, and another west of Foundation Ice Stream. The vertical information from repeated ICESat tracks enables us to study the topography and flexure characteristics across these three ice plains, and we use this to develop a classification scheme for ice plains based on their surface topography and their state of flotation. We show that one of these ice plains indicates changes in lateral extent on short time-scales, depending on the state of the ocean tide. Understanding the location and nature of ice plains is important for ice sheet modeling, since they add uncertainty to the absolute boundary between floating and grounded ice.

Brunt, Kelly M.↗

NASA NTRS2013

A Model to Assess the Risk of Ice Accretion Due to Ice Crystal Ingestion in a Turbofan Engine and its Effects on Performance

The occurrence of ice accretion within commercial high bypass aircraft turbine engines has been reported under certain atmospheric conditions. Engine anomalies have taken place at high altitudes that were attributed to ice crystal ingestion, partially melting, and ice accretion on the compression system components. The result was one or more of the following anomalies: degraded engine performance, engine roll back, compressor surge and stall, and flameout of the combustor. The main focus of this research is the development of a computational tool that can estimate whether there is a risk of ice accretion by tracking key parameters through the compression system blade rows at all engine operating points within the flight trajectory. The tool has an engine system thermodynamic cycle code, coupled with a compressor flow analysis code, and an ice particle melt code that has the capability of determining the rate of sublimation, melting, and evaporation through the compressor blade rows. Assumptions are made to predict the complex physics involved in engine icing. Specifically, the code does not directly estimate ice accretion and does not have models for particle breakup or erosion. Two key parameters have been suggested as conditions that must be met at the same location for ice accretion to occur: the local wet-bulb temperature to be near freezing or below and the local melt ratio must be above 10%. These parameters were deduced from analyzing laboratory icing test data and are the criteria used to predict the possibility of ice accretion within an engine including the specific blade row where it could occur. Once the possibility of accretion is determined from these parameters, the degree of blockage due to ice accretion on the local stator vane can be estimated from an empirical model of ice growth rate and time spent at that operating point in the flight trajectory. The computational tool can be used to assess specific turbine engines to their susceptibility to ice accretion in an ice crystal environment.

Jorgenson, Philip C. E.↗

NASA NTRS2019

Detailed Infrared Study of Amorphous to Crystalline Propionitrile Ices Relevant to Observed Spectra of Titan's Stratospheric Ice Clouds

We have conducted a comprehensive study of propionitrile (C2H5CN) ice from the amorphous to crystalline phase in order to provide detailed information on this specific cyanide, which may potentially contribute to the chemical composition of the Haystack ice cloud observed in Titan's stratosphere by the Cassini Composite InfraRed Spectrometer (CIRS). Infrared transmission spectra of thin films of pure propionitrile ices deposited at low temperature (30-160 K) were collected from 50 cm1 to 11,700 cm1 (200-0.85 m). The far-infrared spectral region was specifically targeted to compare with CIRS far-infrared limb spectra. The temperature and time evolution of C2H5CN ice was thoroughly investigated to better understand discrepancies reported in pre- viously published laboratory studies on the crystalline phase of C2H5CN. Specifically, we observe peculiar temperature and time-driven ice phase transitions, revealed by significant spectral variations in the ice, which stabilizes once a complete crystalline phase is achieved. From these results, the crystalline phase of propionitrile ice was identified at deposition temperatures greater than or equal to 135 K and < 140 K. Our findings corro- borate previous studies that ruled out pure propionitrile ice as the sole chemical identity of Titan's observed Haystack emission feature. In order to understand and identify the Haystack cloud, we have initiated co-de- position experiments that incorporate mixtures of Titan-relevant organics, many of which have corresponding vapors that are abundantly present in Titan's stratosphere. In this paper, we present the result of one example of a co-deposited ternary ice mixture containing 16% hydrogen cyanide (HCN), 23% C2H5CN, and 61% benzene (C6H6). Although this co-condensed ice mixture is the best fit thus far obtained to match the broad width of the Haystack, it is still not the appropriate chemical candidate. However, it reveals an intriguing result: the strong lattice mode of pure C2H5CN ice is drastically altered by the surrounding molecules as a result of mixing in a co- condensed phase. The laboratory results reported here on propionitrile ice may help to further constrain the chemical identification of Titan's stratospheric Haystack ice cloud, as well as improve on the current state of knowledge of Titan's stratospheric ice cloud chemistry.

Nna-Mvondo, Delphine↗

NASA NTRS2019

Detailed Infrared Study of Amorphous to Crystalline Propionitrile Ices Relevant to Observed Spectra of Titan's Stratospheric Ice Clouds

We have conducted a comprehensive study of propionitrile (C2H5CN) ice from the amorphous to crystalline phase in order to provide detailed information on this specific cyanide, which may potentially contribute to the chemical composition of the Haystack ice cloud observed in Titan’s stratosphere by the Cassini Composite InfraRed Spectrometer (CIRS). Infrared transmission spectra of thin films of pure propionitrile ices deposited at low temperature (30 – 160 K) were collected from 50 cm(exp -1) to 11700 cm(exp -1) (200 – 0.85 μm). The far-infrared spectral region was specifically targeted to compare with CIRS far-infrared limb spectra. The temperature and time evolution of C2H5CN ice was thoroughly investigated to better understand discrepancies reported in previously published laboratory studies on the crystalline phase of C2H5CN. Specifically, we observe peculiar temperature and time-driven ice phase transitions, revealed by significant spectral variations in the ice, which stabilizes once a complete crystalline phase is achieved. From these results, the crystalline phase of propionitrile ice was identified at deposition temperatures greater than or equal to 135 K and less than 140 K. Our findings corroborate previous studies that ruled out pure propionitrile ice as the sole chemical identity of Titan’s observed Haystack emission feature. As a result, we have initiated co-deposition experiments that incorporate mixtures of Titan relevant organics, many of which have corresponding vapors that are abundantly present in Titan's stratosphere. In this paper, we present the result of one example of a co-deposited trinary ice mixture containing 16% hydrogen cyanide (HCN), 23% C2H5CN, and 61% benzene (C6H6). Although this co-condensed ice mixture is the best fit thus far obtained to match the broad width of the Haystack, it is still not the appropriate chemical candidate. However, it reveals an intriguing result: the strong lattice mode of pure C2H5CN ice is drastically altered by the surrounding molecules as a result of mixing in a co-condensed phase. The laboratory results reported here on propionitrile ice may help to further constrain the chemical identification of Titan’s stratospheric Haystack ice cloud, as well as improve on the current state of knowledge of Titan's stratospheric ice cloud chemistry.

Delphine Nna-Mvondo↗

NASA NTRS2019

Detailed Infrared Study of Amorphous to Crystalline Propionitrile Ices Relevant to Observed Spectra of Titan's Stratospheric Ice Clouds

We have conducted a comprehensive study of propionitrile (C2H5CN) ice from the amorphous to crystalline phase in order to provide detailed information on this specific cyanide, which may potentially contribute to the chemical composition of the Haystack ice cloud observed in Titan's stratosphere by the Cassini Composite InfraRed spectrometer (CIRS). Infrared transmission spectra of thin films of pure propionitrile ices deposited at low temperature (30–160 K) were collected from 50 cm(exp −1) to 11,700 cm(exp −1) (200–0.85 μm). The far-infrared spectral region was specifically targeted to compare with CIRS far-infrared limb spectra. The temperature and time evolution of C2H5CN ice was thoroughly investigated to better understand discrepancies reported in previously published laboratory studies on the crystalline phase of C2H5CN. Specifically, we observe peculiar temperature and time-driven ice phase transitions, revealed by significant spectral variations in the ice, which stabilizes once a complete crystalline phase is achieved. From these results, the crystalline phase of propionitrile ice was identified at deposition temperatures greater than or equal to 135 K and <140 K. Our findings corroborate previous studies that ruled out pure propionitrile ice as the sole chemical identity of Titan's observed Haystack emission feature. In order to understand and identify the Haystack cloud, we have initiated co-deposition experiments that incorporate mixtures of Titan-relevant organics, many of which have corresponding vapors that are abundantly present in Titan's stratosphere. In this paper, we present the result of one example of a co-deposited ternary ice mixture containing 16% hydrogen cyanide (HCN), 23% C2H5CN, and 61% benzene (C6H6). Although this co-condensed ice mixture is the best fit thus far obtained to match the broad width of the Haystack, it is still not the appropriate chemical candidate. However, it reveals an intriguing result: the strong lattice mode of pure C2H5CN ice is drastically altered by the surrounding molecules as a result of mixing in a co-condensed phase. The laboratory results reported here on propionitrile ice may help to further constrain the chemical identification of Titan's stratospheric Haystack ice cloud, as well as improve on the current state of knowledge of Titan's stratospheric ice cloud chemistry.

Delphine Nna-Mvondo↗

NASA NTRS2022

An Empirical Algorithm to Map Perennial Firn Aquifers and Ice Slabs Within the Greenland Ice Sheet Using Satellite L-band Microwave Radiometry

Perennial firn aquifers are subsurface meltwater reservoirs consisting of a meters-thick water-saturated firn layer that can form on spatial scales as large as tens of kilometers. They have been observed within the percolation facies of glaciated regions experiencing intense seasonal surface melting and high snow accumulation. Widespread perennial firn aquifers have been identified within the Greenland Ice Sheet (GrIS) via field expeditions, airborne ice-penetrating radar surveys, and satellite microwave sensors. In contrast, ice slabs are nearly continuous ice layers that can also form on spatial scales as large as tens of kilometers as a result of surface and subsurface water-saturated snow and firn layers sequentially refreezing following multiple melting seasons. They have been observed within the percolation facies of glaciated regions experiencing intense seasonal surface melting but in areas where snow accumulation is at least 25 % lower as compared to perennial firn aquifer areas. Widespread ice slabs have recently been identified within the GrIS via field expeditions and airborne ice-penetrating radar surveys, specifically in areas where perennial firn aquifers typically do not form. However, ice slabs have yet to be identified from space. Together, these two ice sheet features represent distinct, but related, sub-facies within the broader percolation facies of the GrIS that can be defined primarily by differences in snow accumulation, which influences the englacial hydrology and thermal characteristics of firn layers at depth. Here, for the first time, we use enhanced-resolution vertically polarized L-band brightness temperature () imagery (2015–2019) generated using observations collected over the GrIS by NASA's Soil Moisture Active Passive (SMAP) satellite to map perennial firn aquifer and ice slab areas together as a continuous englacial hydrological system. We use an empirical algorithm previously developed to map the extent of Greenland's perennial firn aquifers via fitting exponentially decreasing temporal L-band signatures to a set of sigmoidal curves. This algorithm is recalibrated to also map the extent of ice slab areas using airborne ice-penetrating radar surveys collected by NASA's Operation IceBridge (OIB) campaigns (2010–2017). Our SMAP-derived maps show that between 2015 and 2019, perennial firn aquifer areas extended over 64 000 km2, and ice slab areas extended over 76 000 km2. Combined together, these sub-facies are the equivalent of 24 % of the percolation facies of the GrIS. As Greenland's climate continues to warm, seasonal surface melting will increase in extent, intensity, and duration. Quantifying the possible rapid expansion of these sub-facies using satellite L-band microwave radiometry has significant implications for understanding ice-sheet-wide variability in englacial hydrology that may drive meltwater-induced hydrofracturing and accelerated ice flow as well as high-elevation meltwater runoff that can impact the mass balance and stability of the GrIS.

Julie Z Miller↗

NASA NTRS2022

Effects of Increasing the Category Resolution of the Sea Ice Thickness Distribution in a Coupled Climate Model on Arctic and Antarctic Sea Ice Mean State

Many modern sea ice models used in global climate models represent the subgrid-scale heterogeneity in sea ice thickness with an ice thickness distribution (ITD), which improves model realism by representing the significant impact of the high spatial heterogeneity of sea ice thickness on thermodynamic and dynamic processes. Most models default to five thickness categories. However, little has been done to explore the effects of the resolution of this distribution (number of categories) on sea-ice feedbacks in a coupled model framework and resulting representation of the sea ice mean state. Here, we explore this using sensitivity experiments in CESM2 with the standard 5 ice thickness categories and 15 ice thickness categories. Increasing the resolution of the ITD in a run with preindustrial climate forcing results in substantially thicker Arctic sea ice year-round. Analyses show that this is a result of the ITD influence on ice strength. With 15 ITD categories, weaker ice occurs for the same average thickness, resulting in a higher fraction of ridged sea ice. In contrast, the higher resolution of thin ice categories results in enhanced heat conduction and bottom growth and leads to only somewhat increased winter Antarctic sea ice volume. The spatial resolution of the ICESat-2 satellite mission provides a new opportunity to compare model outputs with observations of seasonal evolution of the ITD in the Arctic (ICESat-2; 2018–2021). Comparisons highlight significant differences from the ITD modeled with both runs over this period, likely pointing to underlying issues contributing to the representation of average thickness.

Madison M. Smith↗

NASA NTRS2021

A multi-model CMIP6-PMIP4 study of Arctic sea ice at 127 ka: sea ice data compilation and model differences

The Last Interglacial period (LIG) is a period with increased summer insolation at high northern latitudes, which results in strong changes in the terrestrial and marine cryosphere. Understanding the mechanisms for this response via climate modelling and comparing the models' representation of climate reconstructions is one of the objectives set up by the Paleoclimate Modelling Intercomparison Project for its contribution to the sixth phase of the Coupled Model Intercomparison Project. Here we analyse the results from 16 climate models in terms of Arctic sea ice. The multi-model mean reduction in minimum sea ice area from the pre industrial period (PI) to the LIG reaches 50 % (multi-model mean LIG area is 3.20×10^6 sq.km, compared to 6.46×10^6 sq.km for the PI). On the other hand, there is little change for the maximum sea ice area (which is 15–16×10^6 sq.km for both the PI and the LIG. To evaluate the model results we synthesise LIG sea ice data from marine cores collected in the Arctic Ocean, Nordic Seas and northern North Atlantic. The reconstructions for the northern North Atlantic show year-round ice-free conditions, and most models yield results in agreement with these reconstructions. Model–data disagreement appear for the sites in the Nordic Seas close to Greenland and at the edge of the Arctic Ocean. The northernmost site with good chronology, for which a sea ice concentration larger than 75 % is reconstructed even in summer, discriminates those models which simulate too little sea ice. However, the remaining models appear to simulate too much sea ice over the two sites south of the northernmost one, for which the reconstructed sea ice cover is seasonal. Hence models either underestimate or overestimate sea ice cover for the LIG, and their bias does not appear to be related to their bias for the pre-industrial period. Drivers for the inter-model differences are different phasing of the up and down short-wave anomalies over the Arctic Ocean, which are associated with differences in model albedo; possible cloud property differences, in terms of optical depth; and LIG ocean circulation changes which occur for some, but not all, LIG simulations. Finally, we note that inter-comparisons between the LIG simulations and simulations for future climate with moderate (1 %/yr) CO2 increase show a relationship between LIG sea ice and sea ice simulated under CO2 increase around the years of doubling CO2. The LIG may therefore yield insight into likely 21st century Arctic sea ice changes using these LIG simulations.

Arctic sea ice↗

NASA NTRSDate not supplied

Implementation of Interactive Sea Ice Radiative Transfer into the GISS GCM and Its Impact on Sea Ice Simulation

To improve the representation of solar radiation in sea ice in the Goddard Institute for Space Studies (GISS) climate model (ModelE), we have implemented an advanced radiative transfer (RT) scheme to interactively calculate the surface albedo and transmittance of the ice layer and the solar absorption within. The ice physical properties (temperature, salinity, and density), which are simulated by the thermodynamic module in ModelE, are directly used as the input of the RT scheme to determine the inherent optical properties (IOPs) of brine pockets and air bubbles in the ice layers. This provides a more sophisticated, accurate, and complete treatment of sea ice RT for ModelE. The sea ice RT model is also validated with measured spectral albedo and transmittance for different ice types. Compared with ModelE simulations with current radiative parameterization for sea ice, the new RT implementation will slightly increase the ice surface albedo in the summer in the Arctic and greatly increase the radiative transmittance. Consequently, the ice surface melting is reduced and the base melting is increased but the difference in the simulated ice area is small. The effect of this new RT implementation on the Antarctic ice is negligible. The observed decrease in Arctic sea ice extent is well captured by the ModelE simulation.

Sea ice↗

DOE OSTI2022

Sea Ice Rheology Experiment (SIREx): 1. Scaling and Statistical Properties of Sea-Ice Deformation Fields

As the sea-ice modeling community is shifting to advanced numerical frameworks, developing new sea-ice rheologies, and increasing model spatial resolution, ubiquitous deformation features in the Arctic sea ice are now being resolved by sea-ice models. Initiated at the Forum for Arctic Modeling and Observational Synthesis, the Sea Ice Rheology Experiment (SIREx) aims at evaluating state-of-the-art sea-ice models using existing and new metrics to understand how the simulated deformation fields are affected by different representations of sea-ice physics (rheology) and by model configuration. Part 1 of the SIREx analysis is concerned with evaluation of the statistical distribution and scaling properties of sea-ice deformation fields from 35 different simulations against those from the RADARSAT Geophysical Processor System (RGPS). For the first time, the viscous-plastic (and the elastic-viscous-plastic variant), elastic-anisotropic-plastic, and Maxwell-elasto-brittle rheologies are compared in a single study. We find that both plastic and brittle sea-ice rheologies have the potential to reproduce the observed RGPS deformation statistics, including multi-fractality. Model configuration (e.g., numerical convergence, atmospheric representation, spatial resolution) and physical parameterizations (e.g., ice strength parameters and ice thickness distribution) both have effects as important as the choice of sea-ice rheology on the deformation statistics. It is therefore not straightforward to attribute model performance to a specific rheological framework using current deformation metrics. In light of these results, we further evaluate the statistical properties of simulated Linear Kinematic Features in a SIREx Part 2 companion paper.

54 ENVIRONMENTAL SCIENCES↗