Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IV&V”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Corrosion-Resistant Non-Carbon Electrocatalyst Supports for PEFCS

Insufficient durability of commercial catalysts is a persistent issue for PEFC applications.1 Herein, Pt on Nb-doped-TiO 2 is reported as a highly durable electrocatalyst on which the direct 4-electron reduction of oxygen to water is more facile compared to Pt/C. All performance metrics are reported comparing Pt/Nb-TiO2 with a 15% Pt loading, against a commercial Pt/C catalyst (46.5% Pt loading, Tanaka, K. K.). Nb-doped-TiO 2 with high surface area and high electronic conductivity was synthesized using the supercritical fluid method. Initially, the durability of the catalyst was characterized using accelerated stability tests (ASTs) involving 10,000 high potential cycles (DOE/FCCJ protocol) and the Pt/Nb-TiO 2 was found to retain 78% of its initial electrochemically active surface area (ECSA) compared to the 57.6 % retained by Pt/C. These observations were in excellent agreement with previous reports that the Pt particle size of Pt/C grew from 2nm to 8nm during the AST protocol along with severe corrosion and amorphization of the carbon surface.2, 3 TEM and XPS studies of the Pt-Nb-doped-TiO 2 catalyst showed that the Pt particle size grew from 3nm to 6nm and the Nb(IV) and Ti(III) in the support were oxidized to Nb(V) and Ti(IV) after the durability test. Thus, the improvement in Pt/Nb-TiO 2 ECSA retention was attributed to the lower extent of particle growth and lack of oxidative support loss upon oxidation as compared to Pt/C. The oxygen reduction reaction (ORR) performance was characterized by linear polarization using a rotating disk electrode (RDE). The electrochemical surface areas of Pt/Nb-TiO 2 and Pt/C were found to be 48m2·g -1 and 83m2·g -1 respectively, and the mass activity for the ORR at 0.9V vs. RHE were found to be 150 mA·mg-1Pt and 124 mA·mg-1Pt respectively. The improved mass activity on Pt/Nb-TiO 2 was attributed to strong metal support interaction (SMSI) between the Nb-TiO 2 support and the Pt catalyst based on the 625 meV decrease in the binding energy of the Pt4f x-ray photo-electron spectroscopy (XPS) peaks of Pt/Nb-TiO 2 compared to Pt/C. To quantify the impact of the SMSI, a kinetic model was applied to calculate the elementary reaction rate constants for the various steps of the ORR on both catalysts. The reaction rate constant (k1) for the direct 4-electron transfer pathway to produce H 2 O was significantly larger in Pt/Nb-TiO 2 as compared to Pt/C. Thus, the reduction in the electron binding energy as observed in the XPS was found to aid the facile filling of the higher energy 2p orbitals of O 2 thereby leading to improved 4-electron transfer kinetics and improved overall activity.

08 HYDROGEN↗
DOE OSTI2025

Co‐Doping Approach for Enhanced Electron Extraction to TiO 2 for Stable Inorganic Perovskite Solar Cells

Inorganic perovskite CsPbI 3 solar cells hold great potential for improving the operational stability of perovskite photovoltaics. However, electron extraction is limited by the low conductivity of TiO 2 , representing a bottleneck for achieving stable performance. In this study, a co‐doping strategy for TiO 2 using Nb(V) and Sn(IV), which reduces the material's work function by 80 meV compared to Nb(V) mono‐doped TiO 2 , is introduced. To gain fundamental understanding of the processes at the interfaces between the perovskite and charge‐selective layer, transient surface photovoltage measurements are applied, revealing the beneficial effect of the energetic and structural modification on electron extraction across the CsPbI 3 /TiO 2 interface. Using 2D drift‐diffusion simulations, it is found that co‐doping reduces the interface hole recombination velocity by two orders of magnitude, increasing the concentration of extracted electrons by 20%. When integrated into n–i–p solar cells, co‐doped TiO 2 enhances the projected T S80 lifetimes under continuous AM1.5G illumination by a factor of 25 compared to mono‐doped TiO 2 . This study provides fundamental insights into interfacial charge extraction and its correlation with operational stability of perovskite solar cells, offering potential applications for other charge‐selective contacts.

14 SOLAR ENERGY↗
DOE OSTI2024

Prediction of Redox Potentials for Ac, Th, and Pa in Aqueous Solution

Density functional theory in conjunction with small core pseudopotentials and the associated basis sets was used to calculate potentials for multiple redox couples, covering a range of oxidation states for Ac (0 to III), Th (0 to IV), and Pa (0 to V) in aqueous solution. Solvation effects were incorporated using a supermolecule-continuum approach, with 30 water molecules representing two solvation shells, and the COSMO and SMD implicit solvation models. The calculated geometries for Ac(III), Th(IV), and Pa(V) were in reasonable agreement with the available experimental data. Using the COSMO model with the B3LYP functional, the calculated redox potentials were within ± 0.2 V from experiment for most redox couples. Several pathways were explored for the Pa(V/IV) redox couple for different forms of Pa(V) and Pa(IV). Most Pa(V/IV) redox couples have very similar potentials, ranging from 0 to -0.4 V up to a pH of 1.4. At pH = 1.4, the potentials shift to values that are more negative than -0.7 V, reflecting the growing unfavorable nature of the redox process at higher pH levels. The calculated values for An(III/II) potentials were consistent with prior estimates and the available experimental data. The predicted redox potentials for An(II/I) were highly negative, as expected. For An(I/0) potentials, Th and Pa exhibited positive values, contrasting with the negative values calculated for Ac. Furthermore, the An +m /An(0) potentials agreed better with the experimental data when using the COSMO solvation model as compared to the SMD model.

Chemical calculations↗
DOE OSTI2021

Hydrolysis of Small Oxo/Hydroxo Molecules Containing High Oxidation State Actinides (Th, Pa, U, Np, Pu): A Computational Study

The energetics of hydrolysis reactions for high oxidation states of oxo/hydroxo monomeric actinide species (Th IV O 2 , Pa IV O 2 , U IV O 2 , Pa V O 2 (OH), U V O 2 (OH), U VI O 3 , Np VI O 3 , Np VII O 3 (OH), and Pu VII O 3 (OH)) were calculated at the CCSD(T) level. The first step is the formation of a Lewis acid/base adduct with H 2 O (hydration), followed by a proton transfer to form a dihydroxide molecule (hydrolysis); this process is repeated until all oxo groups are hydrolyzed. The physisorption (hydration) for each H 2 O addition was predicted to be exothermic, ca. -20 kcal/mol. The hydrolysis products are preferred energetically over the hydration products for the +IV and +V oxidation states. The compounds with An VI are a turning point in terms of favoring hydration over hydrolysis. For An VII O 3 (OH), hydration products are preferred, and only two waters can bind; the complete hydrolysis process is now endothermic, and the oxidation state for the An in An(OH) 7 is +VI with two OH groups each having one-half an electron. The natural bond order charges and the reaction energies provide insights into the nature of the hydrolysis/hydration processes. The actinide charges and bond ionicity generally decrease across the period. Here, the ionic character decreases as the oxidation state and coordination number increase so that covalency increases moving to the right in the actinide period.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Manganese(II) complexes of 1,1'-bis[(pyridin-2-yl)methyl)]-2,2'-bipiperidine (PYBP): Synthesis, structure, catalytic properties in alkene epoxidation with hydrogen peroxide, and related mechanistic studies

In this study, several manganese(II) complexes with the stereoisomers of ligand PYBP (1,1'-bis[(pyridin-2-yl)methyl]-2,2'-bipiperidine) and different anions were prepared and characterized by X-ray diffractometry. Complex [Mn II (rac-PYBP)] 2+ (1) was found to be an efficient catalyst of alkene epoxidation by hydrogen peroxide in the presence of acetic acid in acetonitrile at room temperature. Cyclooctene was converted to its epoxide with up to 91 % yield, 99.6 % selectivity, and the turnover number of 180 within 5 min. Fast epoxidations of cyclohexene, 1-decene, styrene, and cis-stilbene were also achieved. Isomeric complex [Mn II (meso-PYBP)] 2+ (2) was catalytically inactive under the same experimental conditions. Stopped-flow spectrophotometry and freeze-quenched EPR spectra show that complex 2 is not oxidized by H 2 O 2 in the presence of acetic acid (AcOH) but instead undergoes partial ligand protonation and liberation of the Mn 2+ cations due to the relatively poor chelating ability of ligand meso-PYBP. The rac-PYBP isomer acts as a better ligand and retains the coordinated Mn center when complex 1 is treated with the H 2 O 2 /AcOH mixture in acetonitrile solution yielding a mixture of intensely colored intermediates likely involving Mn III , Mn IV , and Mn V complexes. Magnetic susceptibility measurements, UV–vis and EPR spectra suggest that dinuclear complexes [Mn III 2 (μ-O)(μ-OAc)(rac-PYBP) 2 ] 3+ and [Mn III Mn IV (μ-O) 2 (rac-PYBP) 2 ] 3+ gradually accumulate in the reaction mixture as inactivated states of the catalyst. Complex 1 also causes fast decomposition of hydrogen peroxide into O 2 gas and H 2 O, which competes with the epoxidation of alkenes and requires gradual addition of H 2 O 2 for its efficient use. The catalytic activity of complex 1 is strongly influenced by its counterions and decreases in order ClO 4 - ≈ SbF 6 - > NO 3 – > Cl - indicating that labile ligands in the coordination sphere of Mn are required for the activation of H 2 O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Amidinate Supporting Ligands Influence Molecularity in Formation of Uranium Nitrides

Uranium nitride complexes are attractive targets for chemists as molecular models for the bonding, reactivity, and magnetic properties of next-generation nuclear fuels, but these molecules are uncommon and can be difficult to isolate due to their high reactivity. Here, we describe the synthesis of three new multinuclear uranium nitride complexes, [U(BCMA) 2 ] 2 (μ-N)(μ-κ 1 :κ 1 -BCMA) (7), [(U(BIMA) 2 ) 2 (μ-N)(μ-N i Pr)(K 2 (μ-η 3 :η 3 -CH 2 CHN i Pr)] 2 (8), and [U(BIMA) 2 ] 2 (μ-N)(μ-κ 1 :κ 1 -BIMA) (9) (BCMA = N,N-bis(cyclohexyl)methylamidinate, BIMA = N,N-bis(iso-propyl)methylamidinate), from U(III) and U(IV) amidinate precursors. By varying the amidinate ligand substituents and azide source, we were able to influence the composition and size of these nitride complexes. 15 N isotopic labeling experiments confirmed the bridging nitride moieties in 7–9 were formed via two-electron reduction of azide. The tetra-uranium cluster 8 was isolated in 99% yield via reductive cleavage of the amidinate ligands; this unusual molecule contains nitrogen-based ligands with formal 1–, 2–, and 3– charges. Additionally, chemical oxidation of the U(IV) precursor U(N 3 )(BCMA) 3 yielded the cationic U(V) species [U(N 3 )(BCMA) 3 ][OTf]. Magnetic susceptibility measurements confirmed a U(IV) oxidation state for the uranium centers in the three nitride-bridged complexes and provided a comparison of magnetic behavior in the structurally related U(III)-U(IV)-U(V) series U(BCMA) 3 , U(N 3 )(BCMA) 3 , and [U(N 3 )(BCMA) 3 ][OTf]. At 240 K, the magnetic moments in this series decreased with increasing oxidation state, i.e., U(III) > U(IV) > U(V); this trend follows the decreasing number of 5f valence electrons along this series.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Multiple oxidation states of uranium stabilized by an O , N , O -ligand

Elements of the 5f row maintain a wide variety of oxidation states that have been exploited in synthesis, catalysis, and separations. Herein, we describe the complexation of an O,N,O chelator, ExPh, with uranium in the (IV) and (VI) (uranyl) oxidation states. These two uranium complexes, U(IV)ExPh and UO 2 ExPh, respectively, were characterized in the solid state via single-crystal X-ray diffraction (SC-XRD) analysis. Electrochemical studies using cyclic voltammetry were employed to investigate the multiple redox events associated with the U(IV) complex. Spectro-electrochemical analysis of U(IV)ExPh provided spectroscopic evidence of a stable U(V) species. Chemical oxidation of U(IV)ExPh allowed isolation of the U(V) complex, U(V)ExPh. All three stable uranium complexes produced in this study were characterized via IR, UV-vis and NMR spectroscopies, and micro-spectrophotometry. On the other hand, efforts to reduce U(IV)ExPh to the corresponding U(III) species or produce this putative complex directly from ExPh failed to yield an isolable product. The stabilization of three formal oxidation states of uranium, coupled with previous lanthanide-row results, paves the way for studies of ExPh and its analogues in minor actinide chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mineral-specific heterogeneous neptunium sorption onto geological repository rocks in oxic and anoxic conditions and various temperatures

Neptunium poses challenges for radioactive wastes management due to its long half-life and ingrowth from americium decay, as well as its high mobility in water in its oxidized forms. Np(V)-bearing aqueous solutions were contacted with polished and crushed gneiss and dolerite from the Yeniseisky site, Russia, which is under consideration as a location for an underground repository, both in oxic and anoxic conditions at 20 and 90 °C. Neptunium sorption on crushed gneiss and dolerite in oxic conditions at 20 °C was quite low, but increased substantially in anoxic conditions. Autoradiography on samples treated at 20 °C revealed that sorbed Np was associated mostly with dark colored iron-bearing minerals, and solvent extraction indicated partial reduction of Np(V) to Np(IV). Sorption of Np from aqueous solutions contacted with dolerite and gneiss at 90 °C was in all cases higher than at the lower temperature. Autoradiography of polished rock samples treated in anoxic conditions at 90 °C revealed that Fe-bearing minerals had 3–4 orders of magnitude more Np sorbed on them than the quartz and feldspar grains. X-ray photoelectron spectroscopy indicated this sorbed Np was present as NpO 2 . This study supports the concept that the geologic conditions present at the planned repository site will retard Np migration.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Correlated X‐Ray and Electron Microscopies of a Single Biphasic GaAs Nanowire

Engineering the properties of semiconductors by changing their crystalline phase is a technologically and economically relevant alternative to doping using foreign elements, with strong potential for photonic and electronic applications. Although major advances have been reported recently for crystal‐phase engineering of III‐V and group IV semiconductor nanowires, interfacing two mismatched crystalline phases in a nanostructure induces several deformation mechanisms, which remain largely unexplored. Here, using state‐of‐the‐art synchrotron X‐ray nanobeam diffraction and transmission electron microscopy, subtle twisting and bending is unveiled within an individual GaAs nanowire containing cubic and hexagonal segments. Their role is discussed in accommodating the inter‐reticular spacing fluctuations, and their variations are correlated to the nanoscale phase distribution and to the effect of the NW support. This study brings direct evidence of a complex combination of deformation mechanisms in biphasic nanowires, which opens a new path to tune the nanowire properties with appealing perspectives for device engineering in nanophotonics and nanomechanics.

III-V semiconductors↗
DOE OSTI2024

Hydrologic applicability of satellite-based precipitation estimates for irrigation water management in the data-scarce region

Reliable precipitation estimates are crucial for planning and managing water resources, monitoring hydrologic extremes, and fulfilling irrigation water requirements. Accurate precipitation estimates are particularly challenging in complex mountain terrains, where monitoring gauges are often sparsely distributed due to their remote locations, and high installation and long-term operation costs. Recent advances in satellite-based precipitation estimates offer promising opportunities to improve our understanding of hydrologic processes and their applications for irrigation water management. Several datasets are available varying considerably in terms of their data sources, quality control methods, estimation procedure, and spatiotemporal resolutions. Choosing the most suitable dataset for a particular application is a complex task. In this study, we (1) evaluate the performance of six satellite-based precipitation estimates (SPEs): i) CHIRPS v2.0, ii) CMORPH v1.0, iii) ERA5, iv) IMERG v6, v) MSWEP v2.8, and vi) PERSIANN-CDR against the gauge precipitation using continuous statistical and categorical indices, (2) integrate SPEs with a calibrated semi-distributed hydrologic model to predict streamflow, and (3) demonstrate practical implications of improved streamflow prediction for irrigation water management in the central Himalayan region, Nepal. Our results illustrate that satellite-based precipitation estimates have competitive performance in capturing a wide range of rainfall characteristics, with demonstrated variability across river basins and time scales. Further, there are no significant discrepancies observed in satellite-based precipitation estimates for estimating irrigation water requirements for the three major crops (maize, wheat, and paddy) during the cropping period across the selected river basins, showing a greater promise for irrigation water management planning and decision making.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Multiscale Modeling of Plutonium Radiation Chemistry in Nitric Acid Solutions. 1. Cobalt-60 Gamma Irradiation of Pu(IV)

We report careful manipulation of the plutonium oxidation states is essential in the study and utilization of its rich redox chemistry. To achieve this level of control, a comprehensive mechanistic understanding of radiation-induced plutonium redox chemistry is critical due to the unavoidable exposure of plutonium to ionizing radiation fields, both inherent and from in-process applications. To this end, we have developed an experimentally evaluated multiscale computer model for the prediction of gamma radiation-induced Pu(IV) redox chemistry in concentrated nitric acid solutions (1.0, 3.0, and 6.0 M). Under these acidic, aqueous solution conditions, cobalt-60 gamma irradiation afforded marginal net conversion of Pu(IV) to Pu(VI), the extent of which was dependent on the concentration of HNO 3 and absorbed gamma dose. Multiscale calculations, which are in excellent agreement with experimental data, indicate that this observation is due to a combination of inherent plutonium disproportionation reactions and several radiation-induced processes, including redox cycling between Pu(IV) and Pu(III), as achieved by the reduction of Pu(IV) by nitrous acid and hydrogen peroxide, the oxidation of Pu(III) by nitrate and hydroxyl radicals, and the sequential oxidation of Pu(IV) to Pu(V) and Pu(VI) by the remaining available yield of nitrate radicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Alkaline Earth-Based Ternary Chalcogenide Nanocrystals: Cadmium- and Lead-Free Optical Materials

As some of the most abundant elements on the Earth’s crust, alkaline earths bear great potential in Cd- and Pb-free catalytic, energy conversion, and light-emitting devices. Further, because large electropositive alkaline earths (Ae) can adopt high coordination numbers, they offer structural complexity beyond the tetrahedral (c-Si, II–VI, III–V) or octahedral (IV–VI) atomic sites that─with the notable exception of halide perovskites─are ubiquitous among nanocrystalline semiconductors. Here, in this work, we present a general route to photoluminescent 6–125 nm nanocrystals of ternary AeIn 2 Ch 4 semiconductors (Ae = Sr, Ba; Ch = S, Se) featuring eight- (Ae) as well as four-coordinate (In and Ch) atomic sites. Powder X-ray diffraction, electron microscopy, optical absorption, photoluminescence, and solid-state (ss)NMR spectroscopies attest to the ternary composition and phase purity of the nanocrystals. Continuous shape measures pinpoint the degree of distortion of individual crystallographic sites from ideal coordination polyhedra, allowing us to identify two very distinct types of Se coordination environments. Based on their higher order, pseudo-3-fold rotational symmetry, we assign 77 Se ssNMR peaks with negligible chemical shift anisotropy (CSA) to pyramidalized Se sites with vacant-trigonal bipyramid-like geometries and those with larger CSA to lower symmetry Se sites with seesaw-distorted geometries. Calculations help to better understand the electronic band structure of these materials. The nanocrystals are stable at room temperature in open air for several weeks, and some compositions up to 1000 °C under Ar, making them strong candidates for practical applications.

alkaline earth↗
DOE OSTI2021

Electrochemical behaviour of uranium at a tripolyphosphate modified ITO electrode

UO 2 2+ binds to the surface of a tripolyphosphate modified mesoporous indium tin-doped oxide electrode (nanoITO|P 3 ). Electrochemical studies reveal that nITO|P 3 electrodes catalyze the 2-electron interconversion between UO 2 2+ and U 4+ with the P 3 -ligand assisting in the rate-limiting proton-coupled reduction of U(V) to U(IV), based on the kinetic isotope effect (1.8). Product composition between nITO|P 3 (U 4+ ) and surface adsorbed UO 2 can be controlled by adjusting the proton concentration and/or scan rate in voltammograms. Furthermore these studies with uranium suggest that nITO|P 3 electrodes are good candidates for redox transformations with other actinides including neptunium, plutonium, and americium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Dangling bonds, the charge neutrality level, and band alignment in semiconductors

We present a systematic study of the electronic properties of dangling bonds (DBs) in a variety of semiconductors and examine the relationship between DBs and the charge neutrality level (CNL) in the context of band alignments of semiconductors. We use first-principles calculations based on density functional theory to assess the energetics of DBs in a set of diamond-structure group-IV and III–V or II–VI zinc-blende-structure semiconductors, considering both cation and anion-derived states. We examine the charge-state transition levels of DBs to assess whether they can serve as a CNL to align band structures, by comparing with offsets calculated from interface calculations. Our results show that this approach for evaluating the CNL yields quantitative results for band offsets and provides useful insights. We discuss the relation with alternative approaches for determination of CNLs based on branch-point energies or transition levels of interstitial hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2022

COVID-19 Exposure Assessment Tool (CEAT): Exposure quantification based on ventilation, infection prevalence, group characteristics, and behavior

The coronavirus disease 2019 (COVID-19) Exposure Assessment Tool (CEAT) allows users to compare respiratory relative risk to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) for various scenarios, providing understanding of how combinations of protective measures affect risk. CEAT incorporates mechanistic, stochastic, and epidemiological factors including the (i) emission rate of virus, (ii) viral aerosol degradation and removal, (iii) duration of activity/exposure, (iv) inhalation rates, (v) ventilation rates (indoors/outdoors), (vi) volume of indoor space, (vii) filtration, (viii) mask use and effectiveness, (ix) distance between people (taking into account both near-field and far-field effects of proximity), (x) group size, (xi) current infection rates by variant, (xii) prevalence of infection and immunity in the community, (xiii) vaccination rates, and (xiv) implementation of COVID-19 testing procedures. CEAT applied to published studies of COVID-19 transmission events demonstrates the model’s accuracy. We also show how health and safety professionals at NASA Ames Research Center used CEAT to manage potential risks posed by SARS-CoV-2 exposures.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

New Solids in As-O-Mo, As(P)-O-Mo(W) and As(P)-O-Nb(W) Systems That Exhibit Nonlinear Optical Properties

Interactions between well-mixed fine powders of As 2 O 3 , P 2 O 5 , MoO 3 , WO 3 and Nb 2 O 5 at different stoichiometry in quartz ampoules under vacuum at ~1000 °C in the presence of metallic molybdenum (or niobium), over several weeks, led to shiny dichroic crystalline materials being formed in cooler parts of the reaction vessel. An addition of small quantities of metals-Mo or Nb-was made with the aim of partially reducing their highly oxidized Mo(VI), W(VI) or Nb(V) species to corresponding Mo(V), W(V) and Nb(IV) centers, in order to form mixed valence solids. Sublimed crystals of four new compounds were investigated using a variety of techniques, with prime emphasis on the X-ray analysis, followed by spectroscopy (diffusion reflectance, IR, Raman and EPR), second harmonic generation (SHG), thermal analysis under N 2 and air atmosphere, and single crystals electrical conductivity studies. The results evidenced the formation of new complex solids of previously unknown compositions and structures. Three out of four compounds crystallized in non-centrosymmetric space groups and represent layered 2D polymeric puckered structures that being stacked on each other form 3D lattices. All new solids exhibit strong second-harmonic-generation (SHG effect; based on YAG 1064 nm tests with detection of 532 nm photons), and a rare photosalient effect when crystals physically move in the laser beam. Single crystals’ electrical conductivity of the four new synthesized compounds was measured, and the results showed their semiconductor behavior. Values of band gaps of these new solids were determined using diffusion reflectance spectroscopy in the visible region. Aspects of new solids’ practical usefulness are discussed.

59 BASIC BIOLOGICAL SCIENCES↗