Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ION IMPACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Analytical Calculation of the Energy Deposition Spectrum and Average Dose to A Spherical Target By Ion Tracks at All Impact Parameters

Microdosimetry is used to estimate quality factors for risk assessment in radiation protection [1] and to quantify relative biological effectiveness (RBE) for treatment planning of hadron radiation therapy [2]. Radiation physics has shown that energetic ions deposit energy in a complex manner: the track structure. The Local Effect Model (LEM) [3] is often used as an approximation to describe this complex track structure. We have previously calculated an analytical expression for the dose to a spherical target fully located in the penumbra of an ion track using the LEM [4]. In this work, the calculation has been extended to all impact parameters. Furthermore, using these analytical expressions, it was possible to obtain the theoretical energy deposition spectra to a sphere irradiated uniformly.

I Plante↗
NASA NTRS1979

Calculation of resonant effects in electron-impact excitation of positive ions Application to oxygen VII

The general reaction theory of Feshbach is applied to the calculation of resonant effects in near-threshold electron-positive-ion excitation. The theory divides configuration space into open- and closed-channel parts, resonance effects being described by the closed-channel part. The open-channel part is handled in a distorted-wave approximation to the set of open-channel coupled equations. Various methods are suggested for handling the closed-channel part. However, an 'attached-excited-target approximation' is used explicitly, which is further approximated by a set of uncoupled closed-channel equations. As an example, the 1 1S-2 1P excitation cross section of O VII below the 3 3S threshold is calculated. Various distorted-wave approximations are investigated and results from most of them are quite similar. Resonant effects arising from the attachment of the colliding electron with the 3 3S state are found to be small, but other close-lying n = 3 states have not yet been included.

Pindzola, M. S.↗
NASA NTRS1988

Ion formation by electron impact

Dissociative attachment and polar dissociation cross sections were measured for the following molecules: HC1, NO, N2O, C6H6, SiH4, Si2H6, and LiH. Direct ionization and dissociative ionization cross sections were determined for the following molecules: H2, D2, N2, O2, He, Ne, Ar, Kr, Xe, H2O, Co, CO2, CH4, SiH4, Sih4, Si2H6, N2*, and NH3. An experimental apparatus for a pulsed extraction technique was fabricated and successfully tested.

Srivastava, Santosh K.↗
NASA NTRS2007

Impact of Ring Current Ions on Electromagnetic Ion Cyclotron Wave Dispersion Relation

Effect of the ring current ions in the real part of electromagnetic ion Cyclotron wave dispersion relation is studied on global scale. Recent Cluster observations by Engebretson et al. showed that although the temperature anisotropy of is energetic (> 10 keV) ring current protons was high during the entire 22 November 2003 perigee pass, electromagnetic ion cyclotron waves were observed only in conjunction with intensification of the ion fluxes below 1 keV by over an order of magnitude. To study the effect of the ring current ions on the wave dispersive properties and the corresponding global wave redistribution, we use a self-consistent model of interacting ring current and electromagnetic ion cyclotron waves, and simulate the May 1998 storm. The main findings of our simulation can be summarized as follows: First, the plasma density enhancement in the night MLT sector during the main and recovery storm phases is mostly caused by injection of suprathermal plasma sheet H + (approximately < 1 keV), which dominate the thermal plasma density. Second, during the recovery storm phases, the ring current modification of the wave dispersion relation leads to a qualitative change of the wave patterns in the postmidnight-dawn sector for L > 4.75. This "new" wave activity is well organized by outward edges of dense suprathermal ring current spots, and the waves are not observed if the ring current ions are not included in the real part of dispersion relation. Third, the most intense wave-induced ring current precipitation is located in the night MLT sector and caused by modification of the wave dispersion relation. The strongest precipitating fluxes of about 8 X 10(exp 6)/ (cm(exp 2) - s X st) are found near L=5.75, MLT=2 during the early recovery phase on 4 May. Finally, the nightside precipitation is more intense than the dayside fluxes, even if there are less intense waves, because the convection field moves ring current ions into the loss cone on the nightside, but drives them out of the loss cone on the dayside. So convection and wave scattering reinforce each other in the nightside, but interfere in the dayside sector.

Khazanov, G. V.↗
NASA NTRS1994

The physics of grain-grain collisions and gas-grain sputtering in interstellar shocks

Grain-grain collisions and ion sputtering destroy dust grains in interstellar shocks. An analytical theory is developed for the propagation of shock waves in solids driven by grain-grain collisions, which compares very favorably with detailed numerical calculations. This theory is used to determine the fraction of grain vaporized by a grain-grain collision. Our results predict much less vaporization of colliding grains in interstellar shocks than previous estimates. This theory can also be used to determine the fraction of a colliding grain that melts, shatter, or undergoes a phase transformation to a higher density phase. In particular, the latter two processes can be much more important in interstellar shocks than vaporization. The sputtering of grains by impacting gas ions is reanalyzed based upon extensive laboratory studies and a theoretically derived 'universal'sputtering relation. The analytical results are compared to available experimental studies of sputtering of graphite/amorphous carbon, SiO2, SiC, Fe, and H2O. Sputtering yields for astrophysically relevant materials as a function of impact energy and ion mass are derived. These yields are also averaged over thermal impact spectrum and simple polynomial fits to the resulting yields as a function of temperature are presented. The derived sputtering yields are similar to those adopted in previous studies, except for graphite near threshold where the new yields are much larger due to a lower adopted binding energy. The ion bombardment will amorphitize the surface layers of interstellar grains. It will also convert graphite into hydrogenated amorphous carbon (HAC) to a depth of 10-20 A. It is suggested that these HAC surfaces are the carriers of the 3.4 micrometer absorption feature in the interstellar medium.

Tielens, A. G. G. M.↗
NASA NTRS1990

Evidence for magnetospheric effects on the sodium atmosphere of Mercury

Monochromatic images of Mercury at the sodium D2 emission line showed excess sodium emission in localized regions at high northern and southern latitudes and day-to-day global variations in the distribution of sodium emission. These phenomena support the suggestion that magnetospheric effects could be the cause. Sputtering of surface minerals could produce sodium vapor in polar regions during magnetic substorms, when magnetospheric ions directly impact the surface. Another important process may be the transport of sodium ions along magnetic field lines toward polar regions, where they impact directly on the surface of Mercury and are neutralized to regenerate neutral sodium atoms. Day-to-day variations in planetary sodium distributions could result from changing solar activity, which can change the magnetosphere in time scales of a few hours. Observations of the sodium exosphere may provide a tool for remote monitoring of the magnetosphere of Mercury.

Potter, A. E.↗
NASA NTRS2010

Observations of Metallic Species in Mercury's Exosphere

From observations of the metallic species sodium (Na), potassium (K), and magnesium (Mg) in Mercury's exosphere, we derive implications for source and loss processes. All metallic species observed exhibit a distribution and/or line width characteristic of high to extreme temperature - tens of thousands of degrees K. The temperatures of refractory species, including magnesium and calcium, indicate that the source process for the atoms observed in the tail and near-planet exosphere are consistent with ion sputtering and/or impact vaporization of a molecule with subsequent dissociation into the atomic form. The extended Mg tail is consistent with a surface abundance of 5-8% Mg by number, if 30% of impact-vaporized Mg remains as MgO and half of the impact vapor condenses. Globally, ion sputtering is not a major source of Mg, but locally the sputtered source can be larger than the impact vapor source. We conclude that the Na and K in Mercury's exosphere can be derived from a regolith composition similar to that of Luna 16 soil (or Apollo 17 orange glass), in which the abundance by number is 0.0027 (0.0028) for Na and 0.0006 (0.0045) for K.

Killen, Rosemary M.↗
NASA NTRS2012

Space Weathering Investigations Enabled by NASA's Virtual Heliophysical Observatories

Structural and chemical impact of the heliospheric space environment on exposed planetary surfaces and interplanetary dust grains may be generally defined as space weathering . In the inner solar system, from the asteroid belt inwards towards the Sun, the surface regolith structures of airless bodies are primarily determined by cumulative meteoritic impacts over billions of years, but the molecular composition to meters in depth can be substantially modified by irradiation effects. Plasma ions at eV to keV energies may both erode uppermost surfaces by sputtering, and implant or locally produce exogenic material, e.g. He-3 and H2O, while more energetic ions drive molecular change through electronic ionization. Galactic cosmic ray ions and more energetic solar ions can impact chemistry to meters in depth. High energy cosmic ray interactions produce showers of secondary particles and energetic photons that present hazards for robotic and human exploration missions but also enable detection of potentially useable resources such as water ice, oxygen, and many other elements. Surface sputtering also makes ejected elemental and molecular species accessible for in-situ compositional analysis by spacecraft with ion and neutral mass spectrometers. Modeling of relative impacts for these various space weathering processes requires knowledge of the incident species-resolved ion flux spectra at plasma to cosmic ray energies and as integrated over varying time scales. Although the main drivers for investigations of these processes come from NASA's planetary science and human exploration programs, the NASA heliophysics program provides the requisite data measurement and modeling resources to enable specification of the field & plasma and energetic particle irradiation environments for application to space weather and surface weathering investigations. The Virtual Heliospheric Observatory (VHO), Virtual Energetic Particle Observatory (VEPO), Lunar Solar Origins Exploration (LunaSOX), and Space Physics Data Facility (SPDF) services now provide a wide range of inner heliospheric spacecraft data that can be applied to space weathering of potential exploration destinations including the Moon, asteroids, and the moons of Mars, as well to radiation hazard assessment for the spacecraft and human explorers. For example, the new VEPO service for time-averaging of multi-source ion flux spectra enables the specification of composite flux spectra from a variety of ongoing and legacy missions for applications to surface interaction modeling. Apollo to Artemis data resources of LunaSOX enable specific space weathering investigations for the Moon, while VHO more generally covers the space field and plasma environments of the inner and outer solar system from the sunward-most perihelia of the twin Helios spacecraft to the ongoing heliosheath passages of the twin Voyagers. Composite multi-source spectra from VEPO can also be applied to the continuing compilation of accumulated 1-AU fluence spectra, mostly contributed by solar wind plasma and energetic particle events, for determination of time-averaged particle compositional and kinetic energy output from the Sun and for modeling of long-term irradiation impacts on planetary surfaces.

Cooper, John F.↗
NASA NTRS1992

The ancient oxygen exosphere of Mars: Implications for atmosphere evolution

This study involves the calculation, by the 2-stream method of Nagy and Cravens, of 'hot' oxygen exosphere density profiles for 'ancient' atmospheres and ionospheres (e.g., different extreme ultraviolet fluxes) and the associated escaping fluxes. We computed the total production rates above different 'nominal' ionopause altitudes (not taking into account the fact that some will reenter the atmosphere). We do not consider the additional neutral escape due to the sputtering process described by Luhmann and Kozyra. The results presented here thus represent conservative estimations of the neutral escape fluxes, but generous estimates of ion loss rates (except that here we do not consider charge exchange and impact ionization ion production processes). Further work along the lines of Luhmann and Kozyra can lead to estimates of sputtering losses over time and the roles played by impact ionization and charge exchange.

Zhang, M. H. G.↗
NASA NTRS1991

Ion microprobe elemental analyses of impact features on interplanetary dust experiment sensor surfaces

Hypervelocity impact features on several of the electro-active dust sensors utilized in the Interplanetary Dust Experiment (IDE) were subjected to elemental analysis using an ion microprobe. The negatively biased dust sensor surfaces acted as ion traps for cations produced in the plasma plumes of impacting particles. Impactor residue surrounds most impact features to two or three feature diameters. After etching away a layer of carbonaceous/silicaceous surface contamination, low mass resolution elemental survey scans are used to tentatively identify the presence of impactor debris. High mass resolution two-dimensional elemental maps and three dimensional depth profiling of the feature and surrounding area show the distribution and relative composition of the debris. The location of these sensors on the six primary Long Duration Exposure Facility (LDEF) sides provides a unique opportunity to further define the debris environment. Researchers applied the same techniques to impact and contaminant features on a set of ultra-pure, highly polished single crystal germanium wafer witness plates that were mounted on row 12 and exposed to the environment during the entire mission.

Hunter, Jerry L.↗
NASA NTRS1992

Ion microprobe elemental analyses of impact features on interplanetary dust experiment sensor surfaces

Hypervelocity impact features from very small particles (less than 3 microns in diameter) on several of the electro-active dust sensors used in the Interplanetary Dust Experiment (IDE) were subjected to elemental analysis using an ion microscope. The same analytical techniques were applied to impact and containment features on a set of ultra-pure, highly polished single crystal germanium wafer witness plates that were mounted on tray B12. Very little unambiguously identifiable impactor debris was found in the central craters or shatter zones of small impacts in this crystalline surface. The surface contamination, ubiquitous on the surface of the Long Duration Exposure Facility, has greatly complicated data collection and interpretation from microparticle impacts on all surfaces.

Simon, Charles G.↗
NASA NTRS2009

Sources of Sodium in the Lunar Exosphere: Modeling Using Ground-Based Observations of Sodium Emission and Spacecraft Data of the Plasma

Observations of the equatorial lunar sodium emission are examined to quantify the effect of precipitating ions on source rates for the Moon's exospheric volatile species. Using a model of exospheric sodium transport under lunar gravity forces, the measured emission intensity is normalized to a constant lunar phase angle to minimize the effect of different viewing geometries. Daily averages of the solar Lyman alpha flux and ion flux are used as the input variables for photon-stimulated desorption (PSD) and ion sputtering, respectively, while impact vaporization due to the micrometeoritic influx is assumed constant. Additionally, a proxy term proportional to both the Lyman alpha and to the ion flux is introduced to assess the importance of ion-enhanced diffusion and/or chemical sputtering. The combination of particle transport and constrained regression models demonstrates that, assuming sputtering yields that are typical of protons incident on lunar soils, the primary effect of ion impact on the surface of the Moon is not direct sputtering but rather an enhancement of the PSD efficiency. It is inferred that the ion-induced effects must double the PSD efficiency for flux typical of the solar wind at 1 AU. The enhancement in relative efficiency of PSD due to the bombardment of the lunar surface by the plasma sheet ions during passages through the Earth's magnetotail is shown to be approximately two times higher than when it is due to solar wind ions. This leads to the conclusion that the priming of the surface is more efficiently carried out by the energetic plasma sheet ions.

Sarantos, Menelaos↗
NASA NTRS2021

Sputtering of Surfaces by Ion Irradiation: A Comparison of Molecular Dynamics and Binary Collision Approximation Models to Laboratory Measurements

We compare various sputtering simulation methods to experimental results in both the low energy (<1 keV) and high energy (≥1 keV) impact regimes for argon ions impacting a pure copper substrate at normal incidence. Our results indicate that for high energy impacts, both binary collision approximation (BCA) and molecular dynamics methods can be used to generate reasonable predictions for the yield and energy distribution of the sputtered atoms. We also find reasonable agreement between the theoretical and experimental results down to impact energies of 600 eV. However, at 200 eV impact energies, significant discrepancies appear between the experimental and theoretical ejecta energy distributions in the peak position, the width of the energy distribution, and the magnitude of the high energy tail. These discrepancies appear to arise from the experimental results being only for atoms sputtered normal to the substrate surface, whereas the theoretical results are integrated over all 2π solid angles above the surface. Using the BCA code SDTrimSP and limiting the results to only atoms emitted within ±15° of the surface normal brings theory and experiment into reasonable agreement. These results suggest that for low energy impacts, the energy distribution of sputtered atoms is highly dependent on the emission angle of the ejecta.

Solar wind↗