Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INHALATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Hepatic pathology in mice after continuous inhalation exposure to 1, 1, 1-trichloroethane

Mice exposed to either 250ppm or 1,000ppm 1,1,1-trichloroethane in air continuously for 14 weeks demonstrated significant changes in the centrilobular hepatocytes for the 1,000ppm group. Moderate liver triglyceride accumulation was evident in the 1,000ppm group and peaked at 40mg/gm of tissue after 7 weeks of exposure. Focal hepatocyte necrosis occurred in 40% of the mice exposed to 1,000ppm for 12 weeks. This necrosis was associated with an acute inflammatory infiltrate and hypertrophy of Kupffer cells. These findings indicate that the pathological alternations observed with 1,1,1-trichloroethane are similar to those observed with dichloromethane except for different time courses of the effects and different degrees of recovery. The toxic effects of 1,1,1-trichloroethane are of a similar type to those produced by carbon tetrachloride but appear much less severe.

Mcnutt, N. S.↗

The Acute Inhalation Toxicity in Rats from the Pyrolysis Products of Four Fluoropolymers

Male Sprague-Dawley rats (225?250 g) were exposed to the thermal degradation products from four fluoropolymers. The three polymers containing vinylidene fluoride and hexafluoropropene (VF2/HFP) were pyrolyzed at 550? and 800?C, whereas polytetrafluoroethylene (PTFE) was pyrolyzed at 625 and 800?C. At the lower temperatures, the pyrolysate from the copolymer of vinylidene fluoride and hexafluoropropene (VF2/HFP) was less toxic than the pyrolysates from either the terpolymer of vinyidene fluoride, hexafluoropropene, and tetrafluoroethylene (VF2/HFP/TFE) or the copolymer of vinylidene fluoride and hexafluoropropene with ?additives? (VF2/HFP-A). However, the pyrolysates from the VF2/HFP-containing materials produced less toxic products than the pyrolysate from PTFE at 625?C. When the pyrolysis temperature was increased to 800?C, very little difference was noted between the pyrolysis toxicity for any of the VF2/HFP-containing polymers with the most toxic pyrolysate again produced by PTFE. Carbon monoxide levels were all sublethal. No correlation could be established between hydrolyzable fluoride levels and the lethality of the pyrolysates. Death following exposure occurred within 48 hr due to acute pulmonary edema and hemorrhage. Survival of this acute phase was followed by alveolar lymphocytic infiltration and peribronchial tissue proliferation.

Carter, V. L., Jr.↗

Evaluation of the MARVEL Reactor Inhalation Dose Consequences

A dose consequence analysis was performed to support the preliminary Microreactor Applications Research Validation and Evaluation Project (MARVEL) design effort. The purpose of the MARVEL project is to develop a nuclear microreactor applications test bed at Idaho National Laboratory (INL) to perform research and development on various operational features of microreactors to ultimately improve integration of microreactors to end-user applications. The MARVEL concept is a 100 kilowatt (kW) thermal (kWth) and approximately 20-kW electric (kWe) generating microreactor. The MARVEL system will be located in the INL TREAT facility in the north high-bay equipment pit. The analysis considers the bounding release fractions of the MARVEL reactor concept and documents the dose consequences to the public and collocated worker.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A source of experimental underestimation of aerosol bolus deposition

We examined the measurement error in inhaled and exhaled aerosol concentration resulting from the bolus delivery system when small volumes of monodisperse aerosols are inspired to different lung depths. A laser photometer that illuminated approximately 75% of the breathing path cross section recorded low inhaled bolus half-widths (42 ml) and negative deposition values for shallow bolus inhalation when the inhalation path of a 60-ml aerosol was straight and unobstructed. We attributed these results to incomplete mixing of the inhaled aerosol bolus over the breathing path cross section, on the basis of simultaneous recordings of the photometer with a particle-counter sampling from either the center or the edge of the breathing path. Inserting a 90 degrees bend into the inhaled bolus path increased the photometer measurement of inhaled bolus half-width to 57 ml and yielded positive deposition values. Dispersion, which is predominantly affected by exhaled bolus half-width, was not significantly altered by the 90 degrees bend. We conclude that aerosol bolus-delivery systems should ensure adequate mixing of the inhaled bolus to avoid error in measurement of bolus deposition.

Non-NASA Center↗

Pulmonary Toxicity Studies of Lunar Dusts in Rodents

NASA will build an outpost on the lunar surface for long-duration human habitation and research. The surface of the Moon is covered by a layer of fine, reactive dust, and the living quarters in the lunar outpost are expected to be contaminated by lunar dust. NASA established the Lunar Airborne Dust Toxicity Advisory Group (LADTAG) to evaluate the risk of exposure to the dust and to establish safe exposure limits for astronauts working in the lunar habitat. Because the toxicity of lunar dust is not known, LADTAG has recommended investigating its toxicity in the lungs of laboratory animals. After receiving this recommendation, NASA directed the JSC Toxicology Laboratory to determine the pulmonary toxicity of lunar dust in exposed rodents. The rodent pulmonary toxicity studies proposed here are the same as those proposed by the LADTAG. Studies of the pulmonary toxicity of a dust are generally done first in rodents by intratracheal instillation (ITI). This toxicity screening test is then followed by an inhalation study, which requires much more of the test dust and is labor intensive. We succeeded in completing an ITI study on JSC-1 lunar dust simulant in mice (Lam et al., Inhalation Toxicology 14:901-916, 2002, and Inhalation Toxicology 14: 917-928, 2002), and have conducted a pilot ITI study to examine the acute toxicity of an Apollo lunar (highland) dust sample. Preliminary results obtained by examining lung lavage fluid from dust-treated mice show that lunar dust was somewhat toxic (more toxic than TiO2, but less than quartz dust). More extensive studies have been planned to further examine lung lavage fluid for biomarkers of toxicity and lung tissues for histopathological lesions in rodents exposed to aged and activated lunar dust samples. In these studies, reference dusts (TiO2 and quartz) of known toxicities and have industrial exposure limits will be studied in parallel so the relative toxicity of lunar dust can be determined. The ITI results will also be useful for choosing an exposure concentration for the animal inhalation study on a selected lunar dust sample, which is included as a part of this proposal. The animal inhalation exposure will be conducted with lunar dust simulant prior to the study with the lunar dust. The simulant exposure will ensure that the study techniques used with actual lunar dust will be successful. The results of ITI and inhalation studies will reveal the toxicological risk of exposures and are essential for setting exposure limits on lunar dust for astronauts living in the lunar habitat.

Lam, Chiu-wing↗

Association of particulate air pollution and acute mortality: involvement of ultrafine particles?

Recent epidemiological studies show an association between particulate air pollution and acute mortality and morbidity down to ambient particle concentrations below 100 micrograms/m3. Whether this association also implies a causality between acute health effects and particle exposure at these low levels is unclear at this time; no mechanism is known that would explain such dramatic effects of low ambient particle concentrations. Based on results of our past and most recent inhalation studies with ultrafine particles in rats, we propose that such particles, that is, particles below approximately 50 nm in diameter, may contribute to the observed increased mortality and morbidity In the past we demonstrated that inhalation of highly insoluble particles of low intrinsic toxicity, such as TiO2, results in significantly increased pulmonary inflammatory responses when their size is in the ultrafine particle range, approximately 20 nm in diameter. However, these effects were not of an acute nature and occurred only after prolonged inhalation exposure of the aggregated ultrafine particles at concentrations in the milligrams per cubic meter range. In contrast, in the course of our most recent studies with thermodegradation products of polytetrafluoroethylene (PTFE) we found that freshly generated PTFE fumes containing singlet ultrafine particles (median diameter 26 nm) were highly toxic to rats at inhaled concentrations of 0.7-1.0 x 10(6) particles/cm3, resulting in acute hemorrhagic pulmonary inflammation and death after 10-30 min of exposure. We also found that work performance of the rats in a running wheel was severely affected by PTFE fume exposure. These results confirm reports from other laboratories of the highly toxic nature of PTFE fumes, which cannot be attributed to gas-phase components of these fumes such as HF, carbonylfluoride, or perfluoroisobutylene, or to reactive radicals. The calculated mass concentration of the inhaled ultrafine PTFE particles in our studies was less than 60 micrograms/m3, a very low value to cause mortality in healthy rats. Aging of the fumes with concomitant aggregation of the ultrafine particles significantly decreases their toxicity. Since ultrafine particles are always present in the urban atmosphere, we suggest that they play a role in causing acute lung injury in sensitive parts of the population.

NASA Discipline Environmental Health↗

Radiological Performance Modeling: Platform Comparison

Zapadnoe Uranium Mill Tailings Site, Pridneprovsky Chemical Plant Ukraine: Two exposure scenarios were utilized to develop performance assessment models in GoldSim and NORMALYSA. The first scenario is an onsite worker exposed to radioactivity through external ground irradiation as well as radon and radioactive dust inhalation. The second being an offsite Resident 300 years after institutional control exposed through the ingestion of garden vegetables irrigated by contaminated ground water, ingestion of fish from Konoplyanka River, and agricultural activities in contaminated garden. NORMALYSA utilizes a modular interface to connect extensive pre-created modules to develop contaminant transport and risk assessment models for safety assessments and performance assessments at NORM and legacy sites. Developed by Facilia AB, the program was tested with the creation of the Zapadnoe model under the International Atomic Energy Agency MODARIA Il Working Group 1 (WG1). Default values are provided for input parameters where site specific data and distributions lack. Probabilistic simulations and inputs are limited to parameters with assigned Gaussian probability functions. Similar results for transient worker inhalation dose were found in comparison with the Zapadnoe GoldSim model. However, the NORMALYSA model has results larger by an order of magnitude for external radiation in the transient worker and for aquatic food ingestion, inhalation, and garden food ingestion to the resident. Performance Assessment Modeling: Radiological performance models promote good management and support in remediation and environmental decision making by optimizing radioactive waste disposal site performance. a performance assessment model of the Zapadnoe uranium mill tailings site and a model for calculating authorized limits at Los Alamos National Laboratory are created to demonstrate and highlight the respective capabilities of three modeling platforms: GoldSim, NORMALYSA, and RESRAD-Onsite. GoldSim is a general-purpose modeling platform with the ability to simulate site-specific FT radionuclide transport and risk assessment using a graphical interface to create and link elements that act as indivisible building blocks of the model. The Zapadnoe performance assessment model created in GoldSim is composed of input parameters collected from site specific parameters from WG1 as well as standard assumptions seen in the Generic PA Model from Neptune and Company. The multivariate Zapadnoe simulation contains both deterministic and probabilistic simulation capabilities with the ability to quantitatively represent the uncertainty and associated risks of the site via the Monte Carlo simulation method. Model parameters, documentation, and assumptions are built directly into the model creating a transparent, reproducible, and more purposeful site specific model. To demonstrate this, an ingestion of water pathway was included in addition to the exposure pathways included in the NORMALYSA model. GoldSim offers a wide variety of probability distributions to choose from as well as many tools to visualize the uncertainty of the models and explore which pathways and radionuclides dominate dose. In contrast to the NORMALYSA model, the GoldSim model uses dynamic simulation to calculate tritium concentrations. Authorized limits support the evaluation of radiological health effects from radionuclides present in bulk contaminated soil in order to assist in the process of clearing land for release under different uses. Calculations of authorized limits in RESRAD-Onsite and GoldSim models support the evaluation for 15 radionuclides using a residential exposure scenario, indoor and outdoor inhalation of dust and vapor phase radionuclides (tritium), incidental soil ingestion, and ingestion grown fruits and Vegetables. RESRAD-Onsite, developed by Argonne National Laboratory is a dedicated computer code for calculating radiation doses and cancer risks to an individual located on top of radioactively contaminated soils. It can also be used to provide guidelines for deriving radionuclide soil levels corresponding to a specific dose criterion. The menu driven user interface facilitates selection of radionuclides and soil concentrations, as well as defines parameter values related to materials, environmental factors, and exposure pathways. The program contains radionuclide-specific data such as dose conversion factors and risk coefficients, as well as soil-water partition coefficients and transfer factors for biotic media. The GoldSim model successfully emulates the RESRAD-Onsite code using identical radiological decay and ingrowth factors, radiation dose conversion factors, and other input parameters. DE EEDE ETS Each model supports dynamic modeling of radionuclide ingrowth and decay over time, and integrate this capability with the transport of radionuclides in the environment via processes such as advection and/or diffusion in fluids, or within porous solid media, The applicability of each program is heavily dependent on project context. In the context of developing Authorized Limits, RESRAD-Onsite may be a more desirable option as it was developed for this particular application. For simple disposal or legacy sites or sites that do not need site-specific model structure, NORMALYSA may be a desirable modeling platform, GoldSim can be used to model any problem for which RESRAD or NORMALYSA is applicable, but its strength lies in its flexibility, analytical, and probabilistic capabilities.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Olivine Dissolution in Simulated Lung and Gastric Fluid as an Analog to the Behavior of Lunar Particulate Matter Inside the Human Respiratory and Gastrointestinal Systems

With the Artemis III mission scheduled to land humans on the Moon in 2025, work must be done to understand the hazards lunar dust inhalation would pose to humans. In this study, San Carlos olivine was used as an analog of lunar olivine, a common component of lunar dust. Olivine was dissolved in a flow-through apparatus in both simulated lung fluid and 0.1 M HCl (simulated gastric fluid) over a period of approximately 2 weeks at physiological temperature, 37°C. Effluent samples were collected periodically and analyzed for pH, iron, silicon, and magnesium ion concentrations. The dissolution rate data derived from our measurements allow us to estimate that an inhaled 1.0 μm diameter olivine particle would take approximately 24 years to dissolve in the human lungs and approximately 3 weeks to dissolve in gastric fluid. Results revealed that inhaled olivine particles may generate the toxic chemical, hydroxyl radical, for up to 5–6 days in lung fluid. Olivine dissolved in 0.1 M HCl for 2 weeks transformed to an amorphous silica-rich solid plus the ferric iron oxy-hydroxide ferrihydrite. Olivine dissolved in simulated lung fluid shows no detectable change in composition or crystallinity. Equilibrium thermodynamic models indicate that olivine in the human lungs can precipitate secondary minerals with fibrous crystal structures that have the potential to induce detrimental health effects similar to asbestos exposure. Our work indicates that inhaled lunar dust containing olivine can settle in the human lungs for years and could induce long-term potential health effects like that of silicosis.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Efficacy of Naloxone as a Treatment for an Acute Exposure to Aerosolized Carfentanil

Carfentanil (CRF) is a powerful synthetic opioid that is approximately 100 times more potent than fentanyl and 10,000 times more potent than morphine. CRF originally was intended to be used as a sedative for big game animals in a veterinary setting, but is becoming increasingly common in the illicit drug trade. The increased use of CRF by people has put strain on first responders, who need to administer increased doses of naloxone (Naracan®, Evzio®), an FDA‐approved opioid antagonist, to counteract the effects. First responders may also worry about the potential of self‐exposure through inhalation or dermal contact with CRF. We set out to study the effectiveness of naloxone against a potentially lethal dose of inhaled CRF in male ferrets. Ferrets were implanted with telemetry devices to study cardiac parameters and exposed to aerosolized CRF in a whole‐body plethysmography chamber to record respiratory parameters. We observed profound depression of respiration which resulted in the animals becoming apneic 23% ± 9% of the time during exposure. We also observed cardiac abnormalities, in the form of premature junctional contractions (PJCs), in the ferrets during the apneic periods. At our acute exposure dose, which was lethal in 9% of our animals, ferrets were unresponsive and incapacitated for 105.6 ± 20.0 minutes following the end of exposure. Naloxone, when administered intramuscularly at human equivalent doses ranging from 4 to 40 mg, significantly reduced the time that ferrets were incapacitated following exposure. Although we saw no significant difference in the reduction of time that the animals were incapacitated between the treatment groups (average times between treatment and revival ranged from 6.5 to 9.7 minutes), higher doses of naloxone did revive a portion of the ferrets quicker than the lower doses (some as soon as 1.5–3.5 minutes post‐treatment). We also observed that naloxone was able to significantly reduce the amount of apneic episodes in CRF‐exposed ferrets and resolved the observed cardiac PJCs. Our results suggest that naloxone is a viable treatment against the effects of a potentially lethal dose of inhaled CRF in ferrets. These data have the potential to inform and aid treatment strategies for an acute inhalation exposure to synthetic opioids. Support or Funding Information Opinions, interpretations, conclusions, and recommendations are those of the author and are not necessarily endorsed by the US Army. This research complied with the Animal Welfare Act and implementing Animal Welfare Regulations and adhered to the principles noted in The Guide for the Care and Use of Laboratory Animals. This research was supported by DTRA RD‐CB. M.R. and N.A.A. were supported in part by an appointment to the Postgraduate Research Participation Program at the US Army Medical Research Institute of Chemical Defense administered by the Oak Ridge Institute for Science and Education through an interagency agreement between the US Department of Energy and USAMRMC. This abstract is from the Experimental Biology 2019 Meeting. There is no full text article associated with this abstract published in The FASEB Journal .

McCranor, Bryan J.↗

220 Rn (Thoron) Geohazard in Room Air of Earthen Dwellings in Vietnam

Thoron’s ( 220 Rn) contribution to α -radiation exposure is usually considered negligible compared to that of 222 Rn (radon). Despite its short half-life of 55.6 seconds, thoron can be exhaled from porous surface layers of building materials into indoor air where people subsequently inhale radioisotopes, including metallic radioactive progeny. Bare surfaces of dry porous soil with relatively high 232 Th content can pose a thoron radiation hazard in indoor air. On northern Vietnam’s Dong Van karst plateau, the spatial distribution of thoron was determined in indoor air of traditional earthen and other types of dwellings using portable RAD7 and SARAD® RTM 2200 detectors. “Mud houses” are constructed with local compacted soil and typically do not have any floor or wall coverings (i.e., no plaster, wallpaper, or paint). Detailed measurements in a mud house revealed levels of thoron in room air averaging >500 Bq m -3 . The spatial distribution of α -radiation from thoron in indoor air at a distance of about 1 m from interior walls was fairly homogeneous and averaged ~200 Bq m -3 . Most concerning, from a human health perspective, were the high thoron concentrations of up to 884 Bq m -3 in sleeping areas near mud walls. The average annual thoron radiation dose to inhabitants of mud houses was estimated based on 13 hours of daily occupancy, including daily activities and sleeping. The estimated average thoron inhalation dose of 27.1 mSv a -1 during sleeping hours near mud surfaces accounts for nearly 75% of the total estimated radon and thoron inhalation dose of 37.4 mSv a -1 from indoor mud house air. Our conservative annual radiation dose estimates do not include subsequent radiation from inhaled metallic progeny of thoron. Our data demonstrate a significant human health risk from radiation exposure and a critical need for remediation in traditional northern Vietnamese mud house dwellings.

58 GEOSCIENCES↗

Pulmonary Toxicity Studies of Lunar Dusts in Rodents

NASA will build an outpost on the lunar surface for long-duration human habitation and research. The surface of the Moon is covered by a layer of fine, reactive dust, and the living quarters in the lunar outpost are expected to be contaminated by lunar dust. Because the toxicity of lunar dust is not known, NASA has tasked its toxicology laboratory to evaluate the risk of exposure to the dust and to establish safe exposure limits for astronauts working in the lunar habitat. Studies of the pulmonary toxicity of a dust are generally done first in rodents by intratracheal/intrapharyngeal instillation. This toxicity screening test is then followed by an inhalation study, which requires much more of the test dust and is labor intensive. Preliminary results obtained by examining lung lavage fluid from dust-treated mice show that lunar dust was somewhat toxic (more toxic than TiO2, but less than quartz dust). More extensive studies are in progress to further examine lung lavage fluid for biomarkers of toxicity and lung tissues for histopathological lesions in rodents exposed to aged and activated (ground) lunar dust samples. In these studies, reference dusts (TiO2 and quartz) of known toxicities and have industrial exposure limits will be studied in parallel so the relative toxicity of lunar dust can be determined. The results from the instillation studies will be useful for choosing exposure concentrations for the animal inhalation study. The animal inhalation exposure will be conducted with lunar dust simulant prior to the study with the lunar dust. The experiment with the simulate will ensure that the study techniques used with actual lunar dust will be successful. The results of instillation and inhalation studies will reveal the toxicological risk of exposures and are essential for setting exposure limits on lunar dust for astronauts living in the lunar habitat.

Lam, Chiu-wing↗

Chemical Reactivity of In-Situ Lunar Dust for Biotoxicity Assessment

Introduction: How does the chemical reactivity of in-situ lunar dust compare to Apollo samples currently stored in curation facilities here on Earth? Essential investigations of this question will help us to further mitigate exploration risks for future human explorers on the Moon and will also provide critical information for astrobiologists and space biologists using the Moon for scientific inquiry. Discussion: Apollo 14 dust biotoxicity studies, carried out by the NASA Lunar Airborne Dust Toxici-ty Assessment Group (LADTAG), included numerous physiochemical studies[1] and cellular and animal ex-periments. Intratracheal instillation [2] and inhalation studies [3] in rats both showed Apollo 14 dust to be intermediate in toxicity compared to low-tox titanium dusts and high-tox quartz dusts of similar particle siz-es. The collective results were used in models [4] to establish a safe exposure limit for astronauts [5]. Alt-hough LADTAG took extensive steps to preserve what chemical reactivity may still have existed in the sam-ples, it is simply unknown if they possessed true in-situ chemical reactivity or if that reactivity has de-cayed. Initial gas loss on collection and other altera-tions, and even intermittent exposure to Earth-normal conditions during subsequent decades of handling, obscure a forensic reconstruction of the initial state. Because a mineral dust’s chemical reactivity influ-ences its biotoxicity [6], researchers have developed methods to “activate” lunar dust and simulants [7][8]. Past studies that modeled impact processes and radia-tion [9] in the lunar environment suggest that in-situ lunar dust is likely to be more chemically reactive than Earth-exposed samples. Because of these results, in-situ measurements are warranted [10]. Other studies have examined the hydroxyl generating capability of iron bearing mineral phases [11][12] and further em-phasize the role iron plays in chemical reactivity of lunar material, as well as decay of chemical reactivity in mineral dusts [12]. Recent observations of the lunar surface reveal the presence of hematite [13], a finding that further supports the hypothesis that in-situ lunar dust is reactive. Since the lunar surface is heterogene-ous, dust biotoxicity is expected to vary from site to site [14] due to particle size, mineralogy, physical characteristics, degree of space weathering, and chemi-cal reactivity (Figure 1). This circumstance dictates dust assessments at a suite of lunar sites enabled by upcoming NASA and commercial lunar payload ser-vices (CLPS) opportunities. Dose, location, and dura-tion of particle exposure will also affect biological responses. In-situ chemical reactivity measurements can inform cross-cutting collaborative research cam-paigns such as astrobiology studies examining regolith interactions with organisms and its ability to preserve chemical and structural biomarkers, as well as space biology investigations that examine regolith-microbe interactions relating to life support systems, plant growth, biomining, and development of regolith bio-composites. Figure 1: Environment conditions on the lunar surface that may alter regolith reactivity. Summary A series of in-situ measurements of lu-nar dust free radical chemistry at future Artemis and CLPS landing sites, combined with LADTAG-like studies of freshly collected lunar dust specimens, will reveal the true chemical reactivity of in-situ lunar dust and generate scientific data that can be compared to the chemical reactivity and biotoxicity of samples from Apollo landing sites. Furthermore, results from in situ measurements and biotoxicity studies of freshly col-lected specimens can also be used to validate, or re-quire revision of, the current astronaut permissible exposure limit [15]. References: [1] McKay D et al (2015), Acta As-tronaut 107:163–176. [2] Rask J et al (2013), LPSC, p 3062. [3] Lam CW et al (2013), Inhal Toxicol 25:661–678. [4] James JT, et. al. (2013) , Inhal Toxicol 25:243–256. [5] Scully RR, et.al. (2013), Inhal Toxi-col 25:785–793. [6] Porter, D. W., et.al., (2002), Tox-icology 175, 63–71. [7] Wallace WT, et.al., (2009), Meteorit Planet Sci 44:961–970. [8] Wallace WT, et.al., (2010), Earth Planet Sci Lett 295:571–577. [9] Loftus D, Rask J, et.al., (2010), Earth Moon Planet 107:95–105. [10] Rask J, et.al., (2009) LEAG p 57. [11] Turci F, et.a., (2015), Astrobiology. 2015;15(5):371-380. [12] Hendrix DA, et.al., (2019), Geohealth. 2019;3(1):28-42. [13] Li, S., et.al., (2020), Science advances, 6(36), p.eaba1940. [14] Rask J. (2018), In: Cudnik B. (eds) Encyclopedia of Lunar Science. Springer, Cham. [15] Rask, J, (2020), LPI, Artemis III Sci. def. paper 2120.

chemical reactivity↗

Repetitive diacetyl vapor exposure promotes ubiquitin proteasome stress and precedes bronchiolitis obliterans pathology

Bronchiolitis obliterans (BO) is a devastating lung disease seen commonly after lung transplant but also seen following severe respiratory tract infection or chemical inhalation exposure. Diacetyl (DA; 2,3-butanedione), highly reactive alpha-diketone is known to cause BO when inhaled, however, the mechanisms of how inhalation exposure leads to BO development remains poorly understood. In the current work, we combined two clinically relevant models for studying the pathogenesis of DA-induced BO: (1) an in vivo rat model of repetitive DA vapor exposures with recovery and (2) an in vitro model of primary human airway epithelial cells exposed to pure DA vapors. Rats exposed to 5 consecutive days 200 parts-per-million DA 6 hrs per day had worsening survival, persistent hypoxemia, poor weight gain, and histologic evidence of BO 14 days after DA exposure cessation. At the end of exposure, increased expression of the ubiquitin stress protein, ubiquitin-C, accumulated within DA-exposed rat lung homogenates, localized primarily to the airway epithelium, the primary site of BO development, and did not occur in air-exposed controls. Lung proteasome activity increased concurrently after DA exposure. In primary human airway cultures, global proteomics analysis identified 519 significantly modified proteins in DA-exposed samples relative to controls with the ubiquitin proteasome system, endosomal reticulum transport, and the response to unfolded protein pathways being upregulated while cell-cell adhesion and oxidation-reduction pathways being downregulated in DA-exposed samples. Altogether, repetitive DA vapor exposure resulted in abundant protein damage, accumulation of polyubiquinated proteins, and ubiquitin proteasome stress prior to the development of chemical-induced BO pathology.

59 BASIC BIOLOGICAL SCIENCES↗

Phthalate esters on urban airborne particles: Levels in PM10 and PM2.5 from Mexico City and theoretical assessment of lung exposure

Highlights: • Phthtalates esters were found in PM{sub 10} and PM{sub 2.5} collected in Mexico City. • DEHP and DnBP were the phthalates esters in higher concentration. • The exposure to DEHP was estimated as high as 18 ng/8 h. • Age and gender are variables that must be considered when evaluating exposure by inhalation. Endocrine disrupting chemicals (EDCs) from the environment are associated with reproductive abnormalities (i.e. decreased sperm concentration; increased endometriosis) and alterations of the cardiovascular system (i.e. increased blood pressure and risk of coronary disease). Some phthalates esters have been identified as EDCs, for which inhalation is considered as one of the routes of exposure. However, only little is known regarding inhalational exposure to EDCs via urban airborne particles. In the present study, we report the monthly concentration of 8 phthalate esters measured in PM{sub 10} and PM{sub 2.5} collected and recovered during 7 months in a highly populated area of Mexico City. Using the levels of PM{sub 10} and PM{sub 2.5} reported by the automatized network of environmental monitoring of Mexico City for the sampling site, we estimated exposure levels for people of different ages and gender. Two endocrine disrupting compounds, the phthalate esters DEHP and DnBP, were found on the particles in higher concentrations during the warmer months of the year. The highest concentration was reported for DEHP (229.7 μg/g of particles) in PM{sub 2.5} collected in May 2013. After calculations of the DEHP concentration in the atmosphere, and using the respiratory flow rate, we determined males were potentially exposed to larger quantities of DEHP, reaching up to 18 ng/8 h in April 2013. Despite the concentrations of phthalates seem to be rather small, a comprehensive characterization of its presence is necessary in order to evaluate the overall exposure to these compounds, providing a clear view of exposure on children, adolescents and pregnant women.

54 ENVIRONMENTAL SCIENCES↗

Factors determining the exposure of dairy farmers to thoracic organic dust

Highlights: • Dairy farming exposes to thoracic dusts containing bacteria and moulds. • Specific tasks and farm characteristics control exposures to thoracic organic dusts. • Temperature and hygrometry also control the levels of organic dust exposure. Bronchial respiratory diseases are more common in dairy farmers than in the general population, perhaps because the repeated inhalation of organic dust contributes to the development of these disorders. However, the factors determining the exposure of farmers to particles that can enter the lower bronchial tract and interact with it, i.e. the thoracic fraction of the inhalable dust, remain to be identified. We therefore measured the exposure of dairy farmers to thoracic organic dust and identified the farm features and tasks that increased exposure. We measured thoracic particles (n = 110) and farm characteristics and occupational tasks in 29 Brittany dairy farms. The mean (GM) (geometric standard deviation, GSD) concentration of thoracic dust in air inhaled by farmers was 0.24 mg/m{sup 3} (2.8) and the concentrations of endotoxins, Gram-positive bacteria and fungi in the thoracic fraction were 128 EU/m{sup 3} (4.0), 960 CFU/m{sup 3} (6.3) and 690 CFU/m{sup 3} (5.4), respectively. Model-based estimates of the association between exposure, farm features and tasks indicated that manual grain and feed handling and mechanical bedding spreading significantly increased exposure to thoracic dust, endotoxins, bacteria and fungi. Exposure to bacteria and fungi was reduced by cowsheds divided into cubicles, whereas using automatic muck scrappers in alleyway and automatic milking tended to increase exposure to bacteria and endotoxins. Finally, exposure to endotoxin and fungi were reduced by warmer farm buildings and well-ventilated buildings having walls with large openings. In conclusions, major occupational tasks and specific farm features determine the exposure of Breton dairy farmers to thoracic organic dust.

54 ENVIRONMENTAL SCIENCES↗