Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IDEAL FLOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Development of a Driver Code for the WICS Project

Wall Interference Correction System (WICS) is a computational technique to evaluate the wind tunnel wall interference corrections for blockage, Mach number, dynamic pressure and angle of attack. The objective is to predict the effects of the bounding walls on wind tunnel measurements [1]. The procedure attempts to compute these corrections in real time so that the test engineer can implement these by adjusting wind tunnel controls for angle of attack and dynamic pressure while the test is in progress in the 12 ft. pressure wind tunnel at the Ames Research Center. The technique utilizes an ideal flow solver PMARC (Panel Method developed at the Ames Research Center) to compute influence coefficients in an internal flow mode by representing a paneled model of the tunnel for fullspan and semispan tests.

Ghosh, Amitabha↗

Jet Spreading Increase by Passive Control and Associated Performance Penalty

This paper reviews the effects of 'screech', 'asymmetric nozzle shaping', 'tabs' and 'overexpansion' on the spreading of free jets. Corresponding thrust penalty for the tabs and overexpanded condition are also evaluated. The asymmetric shapes include rectangular ones with varying aspect ratio. Tabs investigated are triangular shaped 'delta-tabs' placed at the exit of a convergent circular nozzle. The effect of overexpansion is examined with circular convergent-divergent (C-D) nozzles. Tabs and overexpansion are found to yield the largest increase in jet spreading. Each, however, involves a performance penalty, i.e., a loss in thrust coefficient. Variation of the size of four delta-tabs show that there exists an optimum size for which the gain in jet spreading is the maximum per unit loss in thrust coefficient. With the C-D nozzles, the minimum in thrust coefficient is expected near the beginning of the overexpanded regime based on idealized flow calculations. The maximum increase in jet spreading, however, is found to occur at higher pressure ratios well into the overexpanded regime. The optimum benefit with the overexpanded flow, in terms of gain in spreading for unit penalty, is found to be comparable to the optimum tab case.

Zaman, K. B. M. Q.↗

The State of Scientific Visualization with Regard to the NASA EOS Mission to Planet Earth

In support of the mission to better understand the dynamics of the global atmosphere, John R. Christy and Nathaniel D. Reynolds investigated a wide range of topics. Christy worked closely with NASA scientist Roy Spencer to develop a data set of precision temperature measurements using the NASA built Microwave Sounding Unit. The data from this effort has received international recognition as they provide a source of precise information for the most difficult of environmental issues in the global climate change arena. In addition, Christy coordinated modeling research with NASA scientist Franklin Robertson with research focusing on the validation of global model output using various satellite data with sophisticated statistical techniques. Reynolds worked with NASA scientist Timothy Miller on idealized flows in a rotating annulus and the application of the results to the general circulation of the atmosphere. Additional work was carried out in investigation of stratospheric ozone fluctuations due to dynamical causes.

Christy, John R.↗

Design Analysis and Thermo-Mechanical Fatigue of a Polyimide Composite for Combustion Chamber Support

Polyimide composites are being evaluated for use in lightweight support structures designed to preserve the ideal flow geometry within thin shell combustion chambers of future space launch propulsion systems. Principles of lightweight design and innovative manufacturing techniques have yielded a sandwich structure with an outer face sheet of carbon fiber polyimide matrix composite. While the continuous carbon fiber enables laminated skin of high specific stiffness; the polyimide matrix materials ensure that the rigidity and durability is maintained at operation temperatures of 316 C. Significant weight savings over all metal support structures are expected. The protypical structure is the result of ongoing collaboration, between Boeing and NASA-GRC seeking to introduce polyimide composites to the harsh environmental and loads familiar to space launch propulsion systems. Design trade analyses were carried out using relevant closed form solutions, approximations for sandwich beams/panels and finite element analysis. Analyses confirm the significant thermal stresses exist when combining materials whose coefficients of thermal expansion (CTEs) differ by a factor of about 10 for materials such as a polymer composite and metallic structures. The ramifications on design and manufacturing alternatives are reviewed and discussed. Due to stringent durability and safety requirements, serious consideration is being given to the synergistic effects of temperature and mechanical loads. The candidate structure operates at 316 C, about 80% of the glass transition temperature T(sub g). Earlier thermomechanical fatigue (TMF) investigations of chopped fiber polyimide composites made this near to T(sub g), showed that cyclic temperature and stress promoted excessive creep damage and strain accumulation. Here it is important to verify that such response is limited in continuous fiber laminates.

Thesken, J. C.↗

Experimental and Modeling Studies of the Combustion Characteristics of Conventional and Alternative Jet Fuels. Final Report

The objectives of this project have been to develop a comprehensive set of fundamental data regarding the combustion behavior of jet fuels and appropriately associated model fuels. Based on the fundamental study results, an auxiliary objective was to identify differentiating characteristics of molecular fuel components that can be used to explain different fuel behavior and that may ultimately be used in the planning and design of optimal fuel-production processes. The fuels studied in this project were Fischer-Tropsch (F-T) fuels and biomass-derived jet fuels that meet certain specifications of currently used jet propulsion applications. Prior to this project, there were no systematic experimental flame data available for such fuels. One of the key goals has been to generate such data, and to use this data in developing and verifying effective kinetic models. The models have then been reduced through automated means to enable multidimensional simulation of the combustion characteristics of such fuels in real combustors. Such reliable kinetic models, validated against fundamental data derived from laminar flames using idealized flow models, are key to the development and design of optimal combustors and fuels. The models provide direct information about the relative contribution of different molecular constituents to the fuel performance and can be used to assess both combustion and emissions characteristics.

Meeks, Ellen↗

Lattice Boltzmann and Navier-Stokes Cartesian CFD Approaches for Airframe Noise Predictions

Lattice Boltzmann (LB) and compressible Navier-Stokes (NS) equations based computational fluid dynamics (CFD) approaches are compared for simulating airframe noise. Both LB and NS CFD approaches are implemented within the Launch Ascent and Vehicle Aerodynamics (LAVA) framework. Both schemes utilize the same underlying Cartesian structured mesh paradigm with provision for local adaptive grid refinement and sub-cycling in time. We choose a prototypical massively separated, wake-dominated flow ideally suited for Cartesian-grid based approaches in this study - The partially-dressed, cavity-closed nose landing gear (PDCC-NLG) noise problem from AIAA's Benchmark problems for Airframe Noise Computations (BANC) series of workshops. The relative accuracy and computational efficiency of the two approaches are systematically compared. Detailed comments are made on the potential held by LB to significantly reduce time-to-solution for a desired level of accuracy within the context of modeling airframes noise from first principles.

Airframe Noise Prediction↗

Simulation of Cold Flow in a Truncated Ideal Nozzle with Film Cooling

Flow transients during rocket start-up and shut-down can lead to significant side loads on rocket nozzles. The capability to estimate these side loads computationally can streamline the nozzle design process. Towards this goal, the flow in a truncated ideal contour (TIC) nozzle has been simulated for a range of nozzle pressure ratios (NPRs) aimed to match a series of cold flow experiments performed at the NASA MSFC Nozzle Test Facility. These simulations were performed with varying turbulence model choices and with four different versions of the TIC nozzle model geometry, each of which was created with a different simplification to the test article geometry.

Braman, Kalen↗

Simulation of Cold Flow in a Truncated Ideal Nozzle with Film Cooling

Flow transients during rocket start-up and shut-down can lead to significant side loads on rocket nozzles. The capability to estimate these side loads computationally can streamline the nozzle design process. Towards this goal, the flow in a truncated ideal contour (TIC) nozzle has been simulated using RANS and URANS for a range of nozzle pressure ratios (NPRs) aimed to match a series of cold flow experiments performed at the NASA MSFC Nozzle Test Facility. These simulations were performed with varying turbulence model choices and for four approximations of the supersonic film injection geometry, each of which was created with a different simplification of the test article geometry. The results show that although a reasonable match to experiment can be obtained with varying levels of geometric fidelity, the modeling choices made do not fully represent the physics of flow separation in a TIC nozzle with film cooling.

Braman, K. E.↗

Multidimensional simulations of Mckenna-driven flow tube configuration: Investigating non-ideality in NO x formation flow tube experiments

Multidimensional simulations have been conducted to simulate atmospheric pressure, flat-flame/McKenna-burner-driven-flow tube experiments targeted to obtain NO x speciation data for predicting/analyzing syngas combustion emissions. In a prior work, we demonstrated the impacts of multidimensional transport on post flame region prediction departures from those assuming unidimensional flow/transport conditions. In this work, we develop and utilize a multidimensional laminar reacting flow solver to simulate the fully coupled flame and post flame regions to further elucidate the impacts of the earlier unidimensional modeling assumptions on interpreting post flame NO x experimental data. The model is used to simulate a lean, premixed syngas/air flame and its associated post flame regions within a cylindrical flow-tube-like arrangement. The combustion process takes place under atmospheric condition with trace amount of NO x seeding fed into the inlet gas stream. The spatial evolution of NO x species (NO and NO 2 ) in the flame and in the post-combustion zone suggests two distinct regions: 1) a region encompassing the flame structure itself; and 2) a post flame region in which the temperature decays due to both axial and radial transport processes. The predictions show that for the conditions studied, a pulsatile flow field exists due to the formation of an expanding and contracting recirculation zone in the outer periphery of the flow tube. By resolving the nature of the flow, the resulting time-averaged temperature and species concentrations show improved agreement with existing experimental measurements. The flow-field interaction results in radial inhomogeneities in the NO 2 profiles with the maximum concentration offset from the flow centerline. The location of the peak in NO 2 is coupled with radial temperature gradients from wall cooling effects and their significant influence on NO/NO 2 interconversion kinetics, producing notable NO 2 accumulation in regions near the wall. Geometrical configurations capable of suppressing/minimizing the pulsatile nature are also investigated and the results are compared. Other experimental configurations could be considered in parametric simulations to determine the optimal configuration that would minimize non-idealities in the observations. The work shows the value in performing such computations in advance of settling on a particular design for flow tube/flow reactor experiments.

42 ENGINEERING↗

Assessment of Using Ideal Gas for Predicting Boattail Flow at Cryogenic Temperatures

The applicability of using ideal gas assumptions to simulate high Reynolds number experimental data that was obtained at cryogenic temperatures is examined. Flow over an axisymmetric nozzle boattail model was calculated using reference temperatures of 117 K and 300 K and at Reynolds numbers from 50 to 200 million per meter. From the testing perspective, pressure, compression factor, and isentropic coefficients calculated using one-dimensional real gas equations are used to examine the departure of cryogenic flow from ideal gas flow across the range of temperatures and potential impacts on measured aerodynamic data. Solutions developed using ideal gas assumptions in a three-dimensional Navier-Stokes code are compared with experimental data obtained at cryogenic temperatures at two unit Reynolds numbers at freestream Mach numbers of 0.6 and 0.9. Results for several one- and two-equation turbulence models are shown. Predicted pressure coefficient distributions along the nozzle boattail differed from experimental data between 8% to less than 0.5% depending on the turbulence model and Mach number. The greatest discrepancy occurred in the level of static pressure recovery in the recompression region where the flow was separated. Solutions using warm and cryogenic freestream temperatures predicted similar boattail pressure distributions at the same unit Reynolds number.

Nozzle↗

Assessment of Using Ideal Gas for Predicting Boattail Flow at Cryogenic Temperatures

The applicability of using ideal gas assumptions to simulate high Reynolds number experimental data that was obtained at cryogenic temperatures is examined. Flow over an axisymmetric nozzle boattail model was calculated using reference temperatures of 117 K and 300 K and at Reynolds numbers from 50 to 200 million per meter. From the testing perspective, pressure, compression factor, and isentropic coefficients calculated using one-dimensional real gas equations are used to examine the departure of cryogenic flow from ideal gas flow across the range of temperatures and potential impacts on measured aerodynamic data. Solutions developed using ideal gas assumptions in a three-dimensional Navier-Stokes code are compared with experimental data obtained at cryogenic temperatures at two unit Reynolds numbers at freestream Mach numbers of 0.6 and 0.9. Results for several one- and two-equation turbulence models are shown. Predicted pressure coefficient distributions along the nozzle boattail differed from experimental data between 8% to less than 0.5% depending on the turbulence model and Mach number. The greatest discrepancy occurred in the level of static pressure recovery in the recompression region where the flow was separated. Solutions using warm and cryogenic freestream temperatures predicted similar boattail pressure distributions at the same unit Reynolds number.

Nozzle↗

Numerical Solutions for Supersonic Flow of an Ideal Gas Around Blunt Two-Dimensional Bodies

The method described is an inverse one; the shock shape is chosen and the solution proceeds downstream to a body. Bodies blunter than circular cylinders are readily accessible, and any adiabatic index can be chosen. The lower limit to the free-stream Mach number available in any case is determined by the extent of the subsonic field, which in turn depends upon the body shape. Some discussion of the stability of the numerical processes is given. A set of solutions for flows about circular cylinders at several Mach numbers and several values of the adiabatic index is included.

Fuller, Franklyn B.↗

Correcting for particle counting bias error in turbulent flow

An ideal seeding device is proposed generating particles that exactly follow the flow out are still a major source of error, i.e., with a particle counting bias wherein the probability of measuring velocity is a function of velocity. The error in the measured mean can be as much as 25%. Many schemes have been put forward to correct for this error, but there is not universal agreement as to the acceptability of any one method. In particular it is sometimes difficult to know if the assumptions required in the analysis are fulfilled by any particular flow measurement system. To check various correction mechanisms in an ideal way and to gain some insight into how to correct with the fewest initial assumptions, a computer simulation is constructed to simulate laser anemometer measurements in a turbulent flow. That simulator and the results of its use are discussed.

Edwards, R. V.↗

Numerical Calculations Demonstrating Complete Stabilization of the Ideal Magnetohydrodynamic Resistive Wall Mode by Longitudinal Flow

The cylindrical ideal magnetohydrodynamic (MHD) stability problem, including ow and a resistive wall, is cast in the standard mathematical form, ωA∙x = B∙x, without discretizing the vacuum regions surrounding the plasma. This is accomplished by means of a finite element expansion for the plasma perturbations, by coupling the plasma surface perturbations to the resistive wall using a Green's function approach, and by expanding the unknown vector, x, to include the perturbed current in the resistive wall as an additional degree of freedom. The ideal MHD resistive wall mode (RWM) can be stabilized when the plasma has a uniform equilibrium ow such that the RWM frequency resonates with the plasma's Doppler-shifted sound continuum modes. The resonance induces a singularity in the parallel component of the plasma perturbations, which must be adequately resolved. Complete stabilization within the ideal MHD model (i.e. without parallel damping being added) is achieved as the grid spacing in the region of the resonance is extrapolated to 0 step size

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Classical free-streamline flow over a polygonal obstacle

In classical Kirchhoff flow, an ideal incompressible fluid flows past an obstacle and around a motionless wake bounded by free streamlines. Since 1869 it has been known that in principle, the two-dimensional Kirchhoff flow over a polygonal obstacle can be determined by constructing a conformal map onto a polygon in the log-hodograph plane. In practice, however, this idea has rarely been put to use except for very simple obstacles, because the conformal mapping problem has been too difficult. This paper presents a practical method for computing flows over arbitrary polygonal obstacles to high accuracy in a few seconds of computer time. We achieve this high speed and flexibility by working with a modified Schwarz-Christoffel integral that maps onto the flow region directly rather than onto the log-hodograph polygon. This integral and its associated parameter problem are treated numerically by methods developed earlier by Trefethen for standard Schwarz-Christoffel maps.

Elcrat, A. R.↗

Classical free-streamline flow over a polygonal obstacle

In classical Kirchhoff flow, an ideal incompressible fluid flows past an obstacle and around a motionless wake bounded by free streamlines. Since 1869 it has been known that in principle, the two-dimensional Kirchhoff flow over a polygonal obstacle can be determined by constructing a conformal map onto a polygon in the log-hodograph plane. In practice, however, this idea has rarely been put to use except for very simple obstacles, because the conformal mapping problem has been too difficult. This paper presents a practical method for computing flows over arbitrary polygonal obstacles to high accuracy in a few seconds of computer time. We achieve this high speed and flexibility by working with a modified Schwarz-Christoffel integral that maps onto the flow region directly rather than onto the log-hodograph polygon. This integral and its associated parameter problem are treated numerically by methods developed earlier by Trefethen for standard Schwarz-Christoffel maps.

Elcrat, A. R.↗

Semiempirical method of determining flow coefficients for pitot rake mass flow rate measurements

Flow coefficients applicable to area-weighted pitot rake mass flow rate measurements are presented for fully developed, turbulent flow in an annulus. A turbulent velocity profile is generated semiempirically for a given annulus hub-to-tip radius ratio and integrated numerically to determine the ideal mass flow rate. The calculated velocities at each probe location are then summed, and the flow rate as indicated by the rake is obtained. The flow coefficient to be used with the particular rake geometry is subsequently obtained by dividing the ideal flow rate by the rake-indicated flow rate. Flow coefficients ranged from 0.903 for one probe placed at a radius dividing two equal areas to 0.984 for a 10-probe area-weighted rake. Flow coefficients were not a strong function of annulus hub-to-tip radius ratio for rakes with three or more probes. The semiempirical method used to generate the turbulent velocity profiles is described in detail.

Trefny, C. J.↗

Mixer Analysis of Nacelle/Nozzle Flow

Flow over idealized nozzle computed. Analysis and computer program calculate flow over idealized mixer nozzle. Nozzle idealized by unwrapping it so planform lies in z=O plane. Linearized compresible flow used to calculate flow and mixer shape given loading on mixer. End goal to achieve maximum amount of mixing downstream of mixer while retaining reasonable shape for mixer. Because analysis assumes linearized flow, calculation of effects of deep lobe penetration cannot be made using this program.

Barber, T. J.↗