Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IAC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Midwest Industrial Assessment Center (Final Technical Report)

The Midwest IAC’s prime center was at the University of Missouri (MU) and the satellite center was at Wichita State University, Kansas. During the 5-year period we conducted at least 96 energy assessments, with recommended energy cost savings of $10.3 million of which $6.5 million was implemented savings. The implemented energy savings were 0.63 Terra BTU and CO2 emissions reduction was 400,000 tons. Thirty-five students completed requirements for a certificate of completion from DOE. IAC students received training in cybersecurity basics and application to manufacturing, fundamentals of energy efficiency, ISO50001, smart manufacturing.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Integrated analysis capability for large space systems

The development of an integrated analysis computer program capable of performing the conceptual/preliminary structural system design analysis of large space systems is addressed. The integrated analysis capability (IAC) specifications include thermal/structural/controls integration, an emphasis on existing software and interactive graphics and I/O, a project size capability of 1 to 50 users (1 to 5 users concurrent), and the use of the FORTRAN '77 language. The advantages of the DISCOS and NASTRAN computer programs to the IAC are outlined and recommendations for other programs are made. Barriers to the development of the system arising from the interdisciplinary data flow are defined.

Vos, R. G.↗

Integrated Analysis Capability pilot computer program

An integrated analysis capability (IAC) computer software package was developed for the design analysis and performance evaluation of large space systems. The IAC aids the user in coupling the required technical disciplines (initially structures, thermal and controls), providing analysis solution paths which reveal critical interactive effects in order to study loads, stability and mission performance. Existing technical software modules, having a wide existing user community, are combined with the interface software to bridge between the different technologies and mathematical modeling techniques. The package is supported by executive, data management and interactive graphics software, with primary development within the superminicomputer environment.

Vos, R. G.↗

Finite area combustor theoretical rocket performance

Previous to this report, the computer program of NASA SP-273 and NASA TM-86885 was capable of calculating theoretical rocket performance based only on the assumption of an infinite area combustion chamber (IAC). An option was added to this program which now also permits the calculation of rocket performance based on the assumption of a finite area combustion chamber (FAC). In the FAC model, the combustion process in the cylindrical chamber is assumed to be adiabatic, but nonisentropic. This results in a stagnation pressure drop from the injector face to the end of the chamber and a lower calculated performance for the FAC model than the IAC model.

Gordon, Sanford↗

Crowdsourcing for Challenging Technical Problems - It Works!

The NASA Johnson Space Center Space Life Sciences Directorate (SLSD) and Wyle Integrated Science and Engineering (Wyle) will conduct a one-day business cluster at the 62nd IAC so that IAC attendees will understand the benefits of open innovation (crowdsourcing), review successful results of conducting technical challenges in various open innovation projects, and learn how an organization can effectively deploy these new problem solving tools to innovate more efficiently and effectively. Results from both the SLSD open innovation pilot program and the open innovation workshop conducted by the NASA Human Health and Performance Center will be discussed. NHHPC members will be recruited to participate in the business cluster (see membership http://nhhpc.nasa.gov) and as IAF members. Crowdsourcing may be defined as the act of outsourcing tasks that are traditionally performed by an employee or contractor to an undefined, generally large group of people or community (a crowd) in the form of an open call. The open call may be issued by the organization wishing to find a solution to a particular problem or complete a task, or by an open innovation service provider on behalf of that organization. In 2008, the SLSD, with the support of Wyle, established and implemented pilot projects in open innovation (crowdsourcing) to determine if these new internet-based platforms could indeed find solutions to difficult technical challenges. These unsolved technical problems were converted to problem statements, called Challenges by some open innovation service providers, and were then posted externally to seek solutions to these problems. In addition, an open call was issued internally to NASA employees Agency wide (11 Field Centers and NASA HQ) using an open innovation service provider crowdsourcing platform to post NASA challenges from each Center for the others to propose solutions). From 2008 to 2010, the SLSD issued 34 challenges, 14 externally and 20 internally. The 14 external problems or challenges were posted through three different vendors: InnoCentive, yet2.com and TopCoder. The 20 internal challenges were conducted using the InnoCentive crowdsourcing platform designed for use internal to an organization and customized for NASA use, and promoted as NASA@Work. The results were significant. Of the seven InnoCentive external challenges, two full and five partial awards were made in complex technical areas such as predicting solar flares and long-duration food packaging.

Davis, Jeffrey R.↗

Identifying Energy Savings in Water and Wastewater Plants - Illinois

Since 1976, Industrial Assessment Centers (IACs) administered by the U.S. Department of Energy have supported small and medium-sized American manufacturers to reduce their energy use and improve their productivity and competitiveness. DOE is now offering up to 50 assessments per year at no cost to industrial or municipal water and wastewater plants.

IAC, Illinios↗

Identifying Energy Savings in Water and Wastewater Plants - Indiana

Since 1976, Industrial Assessment Centers (IACs) administered by the U.S. Department of Energy have supported small and medium-sized American manufacturers to reduce their energy use and improve their productivity and competitiveness. DOE is now offering up to 50 assessments per year at no cost to industrial or municipal water and wastewater plants.

IAC, Indiana↗

Identifying Energy Savings in Water and Wastewater Plants - Iowa

Since 1976, Industrial Assessment Centers (IACs) administered by the U.S. Department of Energy have supported small and medium-sized American manufacturers to reduce their energy use and improve their productivity and competitiveness. DOE is now offering up to 50 assessments per year at no cost to industrial or municipal water and wastewater plants.

IAC, Iowa↗

Identifying Energy Savings in Water and Wastewater Plants - West Virginia

Since 1976, Industrial Assessment Centers (IACs) administered by the U.S. Department of Energy have supported small and medium-sized American manufacturers to reduce their energy use and improve their productivity and competitiveness. DOE is now offering up to 50 assessments per year at no cost to industrial or municipal water and wastewater plants.

IAC, West Virginia↗

Identifying Energy Savings in Water and Wastewater Plants - Wisconsin

Since 1976, Industrial Assessment Centers (IACs) administered by the U.S. Department of Energy have supported small and medium-sized American manufacturers to reduce their energy use and improve their productivity and competitiveness. DOE is now offering up to 50 assessments per year at no cost to industrial or municipal water and wastewater plants.

IAC, Wisconsin↗

Design, fabrication, simulation, and testing of additively manufactured lattice-based copper heat sinks

Here, this study investigates the potential advantages of lattice structure-based bound metal material extrusion (MEX) 3D printing for fabricating high-performance copper heat sinks. Copper powder-filled polymer filaments, with a copper content of > 90 wt.%, were developed specifically for the bound metal MEX 3D printing process. Three types of structures—planar, strut, and surface lattices—were 3D printed to facilitate efficient heat transfer pathways within the heat sinks. Subsequent post-processing steps, including polymer removal and sintering, were performed to achieve dense copper parts. Hot isostatic pressing was further employed to enhance the sintered density from 93 to 98%. Finite element analysis (FEA) simulations were conducted to assess the heat transfer efficiency of the designs, and heat transfer experiments were performed using a custom setup to validate the simulation results. Additionally, this research explores the use of extended hold times during pre-sintering and a reduced atmosphere to enhance the %IACS values (electrical conductivity) and thermal performance of the bound metal MEX 3D printed copper heat sinks. The investigation combines experimental analysis, including simulations and heat transfer experiments, to gain insights into the structure-material property relationships and optimize the thermal performance of the printed heat sinks.

Ajjarapu, Kameswara Pavan Kumar [Oak Ridge Nationa↗

Optimizing Conductivity and Hardness in Cu–Nb Nanolamellar Composites Fabricated Through Accumulative Roll Bonding Without Intermittent Heat Treatments

High strength/high conductivity Cu–XNb nanolamellar bimetallic composites (where X < 50 pct) were successfully processed via accumulative roll bonding. No intermittent heat treatments were used which increases industrial applicability. Estimates of conductivity from published models were validated at length scales of ~ 150 nm but were shown to be four times too low for composites with layer thicknesses < 40 nm. Nanoscale composites with conductivity of ~ 47 pct IACS and 99 Rockwell B hardness were fabricated.

36 MATERIALS SCIENCE↗

High Strength, Utilizable Ductility and Electrical Conductivity in Cold Rolled Sheets of Cu-Cr-Zr-Ti Alloy

The microstructure and properties of Cu-0.5Cr-0.03Zr-0.04Ti (wt.%) alloy subjected to cold rolling and aging were investigated using hardness and electrical conductivity measurement, tensile testing, and transmission electron microscopy. Plates subjected to 85% reduction in thickness showed significant improvement in the strength compared to solution treated and aged condition. By proper selection of aging temperature, ductility could be significantly improved without reduction in the strength. Aging of the cold rolled sheet at 420 °C for 1 h yielded an ultimate tensile strength and yield strength of 540 and 460 MPa, respectively. On the other hand, total and uniform elongation was 16 and 12%, respectively, with an electrical conductivity of 65 %IACS. The combination of properties achieved after cold rolling and aging is attributed to the higher dislocation density, ultrafine grains and nano-sized chromium precipitates.

36 MATERIALS SCIENCE↗

Microstructural and Property Evolution of Continuous Columnar-Grained Polycrystalline Copper during Extreme Plastic Deformation at Room Temperature

An extreme extensibility with a true strain of 11.12 has been obtained for continuous columnar-grained (CCG) polycrystalline copper at room temperature, which was cold-drawn from a 10-mm-diameter as-cast rod into a 38.5-μm-diameter ultra-fine wire without any intermediate softening heat treatment. During the extreme plastic deformation, the ultimate tensile stress increased from 140 MPa for as-cast CCG copper to 525 MPa for the deformed sample at a true stain of 11.12, while the relative electrical conductivity maintained a high value of 97.6% IACS. On this basis, CCG copper is an excellent raw material for the fabrication of ultra-fine wires with both high strength and high electrical conductivity. The original columnar grains experienced grain subdivision and formed fibrous grains along the drawing direction with a fibrous longitudinal morphology and curly transverse microstructure at medium to high strain. The subdivision of the fibrous grains then went on as the extreme plastic deformation continued. Large amounts of strain-induced boundaries and microstructural refinement facilitated the storage of abundant glide dislocations created by extreme plastic deformation. Thus, extreme plastic extensibility can be achieved through continuous work hardening of CCG copper.

36 MATERIALS SCIENCE↗

Nickel-Coated Super-Aligned Carbon Nanotube Reinforced Copper Composite for Improved Strength and Conductivity

Nickel (Ni)-coated super-aligned carbon nanotube (SACNT) films-reinforced copper (Cu) matrix composites were fabricated by electrodeposition. The microstructure, mechanical property and electrical conductivity of the prepared composites have been studied systematically. The results show that the mechanical properties of SACNT/Cu were significantly improved by coating SACNT with Ni. When the volume fraction of SACNT is 10.0%, the tensile strength and yield strength of the composite can reach 477.8 and 295.5 MPa, respectively, corresponding to 147 and 170% improvement compared to pure Cu prepared by the same method. Meanwhile, due to the super-aligned arrangement of SACNTs and the homogeneous distribution of Ni, which is not mixing or dissolving with Cu, the conductivities of all the Ni-coated SACNT-reinforced Cu composites are above 58% IACS, which is about 4 times higher than the results in previous research. The enhancement of the strength of the SACNT/Cu composites comes from the combined contribution of load transfer and grain refinement strengthening.

36 MATERIALS SCIENCE↗

Investigation on Strength, Ductility and Electrical Conductivity of Cu-4Ag Alloy Prepared by Cryorolling and Subsequent Annealing Process

Cu-Ag alloy is widely used as conductive material for high-field pulsed magnets in electrical industry. The cryorolling technique is considered as the most applicable severe plastic deformation technique. Therefore, in this study, cryorolling and subsequent annealing process were used to prepare Cu-4Ag (in wt.%) alloy sheets. The strength, ductility and electrical conductivity of Cu-4Ag alloy sheets were investigated. Microstructure of Cu-4Ag alloy was also studied by OM, SEM, XRD and TEM. As a result, the cryorolling specimens after annealing at temperature of 300 °C display a good combination of tensile strength of 652.2 ± 6.0 MPa, moderate elongation of 12.5 ± 0.7% and electrical conductivity of 80.6 ± 0.2% IACS. This is due to the presence of dislocations, dislocation cells, nanograins and nanotwins in the non-recrystallized regions and fine nanoscaled silver precipitates. Besides, a good ductility is achieved in this condition due to its desirable ductile fracture characteristics.

36 MATERIALS SCIENCE↗

The current state of the industrial energy assessment and its impacts on the manufacturing industry

Energy-intensive manufacturing is the greatest contributor to the U.S. industrial energy consumption today. Globally, manufacturing facilities are being directed to reduce their energy consumption to prepare for a sustainable future. Industrial energy assessment plays a crucial role in helping facilities meet their energy efficiency goals by encouraging the implementation of cost-effective, energy-saving recommendations to the existing equipment and processes. Across the world, programs such as the U.S. Department of Energy (DOE) sponsored Industrial Assessment Centers (IACs) (operational across several states in the U.S. for over four decades), are transforming the future of industrial energy consumption by offering free industrial energy assessments to qualifying facilities. In this review paper, the industrial energy assessment approach and practices are comprehensively reviewed with focus on popular recommendations, procedures, and the current practices of the industrial energy assessment program. Specifically, opportunities for improvement in the most energy-intensive manufacturing processes are examined, concentrating on the energy savings and other non-energy benefits of each of these measures, such as cost savings and emissions reduction. Furthermore, this paper also reviews how these energy-saving opportunities are procedurally evaluated and how factors, such as level and cost of assessments, and assessment metrics, are currently defining industrial energy assessment. In final considerations, existing research on energy management, decarbonization through electrification, and renewable energy in industry is reviewed and discussed, and how these advancements will shape the future of industrial energy assessment is addressed through forward-looking lenses.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Nuclear response of additive manufactured GRCop-84 copper for use in Lower hybrid launchers in a fusion environment

Recent advances in selective laser melting (SLM) 3D printing technology allow additive manufacture of lower hybrid current drive (LHCD) RF launchers from a new material, Glenn Research Copper 84 (GRCop-84), a Cr 2 Nb (8 at. % Cr, 4 at. % Nb) precipitation hardened alloy, in configurations unachievable with conventional machining. Tensile strength and thermal conductivity are compared to other competing high conductivity copper alloys for fusion use. Swelling and conductivity at 100 DPA when exposed to the Hanford Fast Flux Test Facility neutron spectrum is predicted in the 1–2 % and 65-70% IACS range, respectively, by comparison to copper alloys with similar precipitate and grain size. Finally, self-similar ion irradiation of a GRCop-84 target at 430 °C to 20 DPA resulted in no noticeable void formation in FIB cross sections or TEM lamella.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗