Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Homeland Security”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Preliminary Benchmarking and MCNP Simulation Results for Homeland Security

The purpose of this article is to create Monte Carlo N-Particle (MCNP) input stacks for benchmarked measurements sufficient for future perturbation studies and analysis. The approach was to utilize historical experimental measurements to recreate the empirical spectral results in MCNP, both qualitatively and quantitatively. Results demonstrate that perturbation analysis of benchmarked MCNP spectra can be used to obtain a better understanding of field measurement results which may be of national interest. If one or more spectral radiation measurements are made in the field and deemed of national interest, the potential source distribution, naturally occurring radioactive material shielding, and interstitial materials can only be estimated in many circumstances. The effects from these factors on the resultant spectral radiation measurements can be very confusing. If benchmarks exist which are sufficiently similar to the suspected configuration, these benchmarks can then be compared to the suspect measurements. Having these benchmarks with validated MCNP input stacks can substantially improve the predictive capability of experts supporting these efforts.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

National Atmospheric Release Advisory Center (NARAC) Capabilities for Homeland Security

The Department of Energy's National Atmospheric Release Advisory Center (NARAC) provides critical information during hazardous airborne releases as part of an integrated national preparedness and response strategy. Located at Lawrence Livermore National Laboratory, NARAC provides 24/7 tools and expert services to map the spread of hazardous material accidentally or intentionally released into the atmosphere. NARAC graphical products show affected areas and populations, potential casualties, and health effect or protective action guideline levels. LLNL experts produce quality-assured analyses based on field data to assist decision makers and responders. NARAC staff and collaborators conduct research and development into new science, tools, capabilities, and technologies in strategically important areas related to airborne transport and fate modeling and emergency response. This paper provides a brief overview of some of NARAC's activities, capabilities, and research and development.

99 GENERAL AND MISCELLANEOUS↗

Novel Materials and Devices for Solid-State Neutron Detection

There is a need in many fields, such as nuclear medicine, non-proliferation, energy exploration, national security, homeland security, nuclear energy, etc, for miniature, thermal neutron detectors. Until recently, thermal neutron detection has required physically large devices to provide sufficient neutron interaction and transduction signal. Miniaturization would allow broader use in the fields just mentioned and open up other applications potentially. Recent research shows promise in creating smaller neutron detectors through the combination of high-neutron-cross-section converter materials and solid-state devices. Yet, till recently it is difficult to measure low neutron fluxes by solidstate means given the need for optimized converter materials (purity, chemical composition and thickness) and a lack of designs capable of efficient transduction of the neutron conversion products (x-rays, electrons, gamma rays). Gadolinium-based semiconductor heterojunctions have detected electrons produced by Gd-neutron reactions but only at high neutron fluxes. One of the main limitations to this type of approach is the use of thin converter layers and the inability to utilize all the conversion products. In this LDRD we have optimized the converter material thickness and chemical composition to improve capture of conversion electrons and have detected thermal neutrons with high fidelity at low flux. We are also examining different semiconductor materials and converter materials to attempt to capture a greater percentage of the conversion electrons, both low and higher energy varieties. We have studied detector size and bias scaling, and cross-sensitivity to xrays and shown that we can detect low fluxes of thermal neutrons in less than 30 minutes with high selectivity by our approach. We are currently studying improvements in performance with direct placement of the Gd converter on the detector. The advancement of sensitive, miniature neutron detectors will have benefits in energy production, nonproliferation and medicine.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Demonstration of a Submillimeter-Wave HEMT Oscillator Module at 330 GHz

In this work, radial transitions have been successfully mated with a HEMT-based MMIC (high-electron-mobility-transistor-based monolithic microwave integrated circuit) oscillator circuit. The chip has been assembled into a WR2.2 waveguide module for the basic implementation with radial E-plane probe transitions to convert the waveguide mode to the MMIC coplanar waveguide mode. The E-plane transitions have been directly integrated onto the InP substrate to couple the submillimeter-wave energy directly to the waveguides, thus avoiding wire-bonds in the RF path. The oscillator demonstrates a measured 1.7 percent DC-RF efficiency at the module level. The oscillator chip uses 35-nm-gate-length HEMT devices, which enable the high frequency of oscillation, creating the first demonstration of a packaged waveguide oscillator that operates over 300 GHz and is based on InP HEMT technology. The oscillator chip is extremely compact, with dimensions of only 1.085 x 320 sq mm for a total die size of 0.35 sq mm. This fully integrated, waveguide oscillator module, with an output power of 0.27 mW at 330 GHz, can provide low-mass, low DC-power-consumption alternatives to existing local oscillator schemes, which require high DC power consumption and large mass. This oscillator module can be easily integrated with mixers, multipliers, and amplifiers for building high-frequency transmit and receive systems at submillimeter wave frequencies. Because it requires only a DC bias to enable submillimeter wave output power, it is a simple and reliable technique for generating power at these frequencies. Future work will be directed to further improving the applicability of HEMT transistors to submillimeter wave and terahertz applications. Commercial applications include submillimeter-wave imaging systems for hidden weapons detection, airport security, homeland security, and portable low-mass, low-power imaging systems

Radisic, Vesna↗

Resilience: Concepts from Engineering, Ecology, and the Social Sciences

“Resilience” is fast becoming a key word for describing the desired result of the activities we group under the heading of “homeland security.” Department of Homeland Security (DHS) Secretary Napolitano has made resilience a key theme in her speeches, highlighting the efforts of DHS to “strengthen the resilience of ... infrastructure, computer networks, and of ... communities and citizens.” She has talked about resilience as “strengthening the ability for our systems, our cities, our towns, and our country to bounce back quickly from an attack or a natural disaster, and to be even stronger than before. This paper first provides an overview of resilience concepts from U.S. government and academic research sources. It then discusses resilience concepts and metrics from the academic literature in more detail, focusing on three types of resilience: engineering resilience, ecological resilience, and community and regional resilience. Next, it discusses system characteristics that have been associated with increased resilience. Based on this background, we propose a model of the infrastructure resilience analysis process. We then review LANL capabilities for each process element and indicate areas where capability development opportunities exist. Appendices provide additional information on funding sources and key players in infrastructure resilience, and a more detailed technical explanation of ecological resilience.

42 ENGINEERING↗