SEARCH · Engineering Papers

Results for “High order accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Rapid, high-order accurate calculation of flows due to free source or vortex distributions

Fast Fourier transform (FFT) techniques are applied to the problem of finding the flow due to source or vortex distributions in the field outside an airfoil or other two-dimensional body. Either the complex potential or the complex velocity may be obtained to a high order of accuracy, with computational effort similar to that required by second-order fast Poisson solvers. These techniques are applicable to general flow problems with compressibility and rotation. An example is given of their use for inviscid compressible flow.

Halsey, D.↗

NASA NTRS1990

Multi-disciplinary optimization of aeroservoelastic systems

Efficient analytical and computational tools for simultaneous optimal design of the structural and control components of aeroservoelastic systems are presented. The optimization objective is to achieve aircraft performance requirements and sufficient flutter and control stability margins with a minimal weight penalty and without violating the design constraints. Analytical sensitivity derivatives facilitate an efficient optimization process which allows a relatively large number of design variables. Standard finite element and unsteady aerodynamic routines are used to construct a modal data base. Minimum State aerodynamic approximations and dynamic residualization methods are used to construct a high accuracy, low order aeroservoelastic model. Sensitivity derivatives of flutter dynamic pressure, control stability margins and control effectiveness with respect to structural and control design variables are presented. The performance requirements are utilized by equality constraints which affect the sensitivity derivatives. A gradient-based optimization algorithm is used to minimize an overall cost function. A realistic numerical example of a composite wing with four controls is used to demonstrate the modeling technique, the optimization process, and their accuracy and efficiency.

Karpel, Mordechay↗

NASA NTRS1992

Multidisciplinary optimization of aeroservoelastic systems using reduced-size models

Karpel, Mordechay↗

NASA NTRS1988

Maximum likelihood identification for large space structures

This paper examines the use of on-orbit identification based on Maximum Likelihood Estimation (MLE) to provide these high-order, high-accuracy control design models for large space structures (LSS's). First, it outlines a general MLE identification algorithm, together with a covariance-analysis procedure to assess algorithm performance in terms of systematic and stochastic errors. Next, it examines various simplifications appropriate for the LSS identification application. Simplified analytical performance results are presented, as are numerical results to support these analyses. Finally, a graphical interpretation of these results is given.

Barrett, Michael F.↗

NASA NTRS1994

Process modelling for materials preparation experiments

The main goals of the research under this grant consist of the development of mathematical tools and measurement techniques for transport properties necessary for high fidelity modelling of crystal growth from the melt and solution. Of the tasks described in detail in the original proposal, two remain to be worked on: development of a spectral code for moving boundary problems, and development of an expedient diffusivity measurement technique for concentrated and supersaturated solutions. We have focused on developing a code to solve for interface shape, heat and species transport during directional solidification. The work involved the computation of heat, mass and momentum transfer during Bridgman-Stockbarger solidification of compound semiconductors. Domain decomposition techniques and preconditioning methods were used in conjunction with Chebyshev spectral methods to accelerate convergence while retaining the high-order spectral accuracy. During the report period we have further improved our experimental setup. These improvements include: temperature control of the measurement cell to 0.1 C between 10 and 60 C; enclosure of the optical measurement path outside the ZYGO interferometer in a metal housing that is temperature controlled to the same temperature setting as the measurement cell; simultaneous dispensing and partial removal of the lower concentration (lighter) solution above the higher concentration (heavier) solution through independently motor-driven syringes; three-fold increase in data resolution by orientation of the interferometer with respect to diffusion direction; and increase of the optical path length in the solution cell to 12 mm.

Rosenberger, Franz↗

NASA NTRS1997

The Local Discontinuous Galerkin Method for Time-Dependent Convection-Diffusion Systems

In this paper, we study the Local Discontinuous Galerkin methods for nonlinear, time-dependent convection-diffusion systems. These methods are an extension of the Runge-Kutta Discontinuous Galerkin methods for purely hyperbolic systems to convection-diffusion systems and share with those methods their high parallelizability, their high-order formal accuracy, and their easy handling of complicated geometries, for convection dominated problems. It is proven that for scalar equations, the Local Discontinuous Galerkin methods are L(sup 2)-stable in the nonlinear case. Moreover, in the linear case, it is shown that if polynomials of degree k are used, the methods are k-th order accurate for general triangulations; although this order of convergence is suboptimal, it is sharp for the LDG methods. Preliminary numerical examples displaying the performance of the method are shown.

Cockburn, Bernardo↗

NASA NTRS2001

Computational Aeroacoustics by the Space-time CE/SE Method

In recent years, a new numerical methodology for conservation laws-the Space-Time Conservation Element and Solution Element Method (CE/SE), was developed by Dr. Chang of NASA Glenn Research Center and collaborators. In nature, the new method may be categorized as a finite volume method, where the conservation element (CE) is equivalent to a finite control volume (or cell) and the solution element (SE) can be understood as the cell interface. However, due to its rigorous treatment of the fluxes and geometry, it is different from the existing schemes. The CE/SE scheme features: (1) space and time treated on the same footing, the integral equations of conservation laws are solve( for with second order accuracy, (2) high resolution, low dispersion and low dissipation, (3) novel, truly multi-dimensional, simple but effective non-reflecting boundary condition, (4) effortless implementation of computation, no numerical fix or parameter choice is needed, an( (5) robust enough to cover a wide spectrum of compressible flow: from weak linear acoustic waves to strong, discontinuous waves (shocks) appropriate for linear and nonlinear aeroacoustics. Currently, the CE/SE scheme has been developed to such a stage that a 3-13 unstructured CE/SE Navier-Stokes solver is already available. However, in the present paper, as a general introduction to the CE/SE method, only the 2-D unstructured Euler CE/SE solver is chosen as a prototype and is sketched in Section 2. Then applications of the CE/SE scheme to linear, nonlinear aeroacoustics and airframe noise are depicted in Sections 3, 4, and 5 respectively to demonstrate its robustness and capability.

Loh, Ching Y.↗

NASA NTRS2001

Multiresolution Wavelet Based Adaptive Numerical Dissipation Control for Shock-Turbulence Computations

The recently developed essentially fourth-order or higher low dissipative shock-capturing scheme of Yee, Sandham and Djomehri (1999) aimed at minimizing nu- merical dissipations for high speed compressible viscous flows containing shocks, shears and turbulence. To detect non smooth behavior and control the amount of numerical dissipation to be added, Yee et al. employed an artificial compression method (ACM) of Harten (1978) but utilize it in an entirely different context than Harten originally intended. The ACM sensor consists of two tuning parameters and is highly physical problem dependent. To minimize the tuning of parameters and physical problem dependence, new sensors with improved detection properties are proposed. The new sensors are derived from utilizing appropriate non-orthogonal wavelet basis functions and they can be used to completely switch to the extra numerical dissipation outside shock layers. The non-dissipative spatial base scheme of arbitrarily high order of accuracy can be maintained without compromising its stability at all parts of the domain where the solution is smooth. Two types of redundant non-orthogonal wavelet basis functions are considered. One is the B-spline wavelet (Mallat & Zhong 1992) used by Gerritsen and Olsson (1996) in an adaptive mesh refinement method, to determine regions where re nement should be done. The other is the modification of the multiresolution method of Harten (1995) by converting it to a new, redundant, non-orthogonal wavelet. The wavelet sensor is then obtained by computing the estimated Lipschitz exponent of a chosen physical quantity (or vector) to be sensed on a chosen wavelet basis function. Both wavelet sensors can be viewed as dual purpose adaptive methods leading to dynamic numerical dissipation control and improved grid adaptation indicators. Consequently, they are useful not only for shock-turbulence computations but also for computational aeroacoustics and numerical combustion. In addition, these sensors are scheme independent and can be stand alone options for numerical algorithm other than the Yee et al. scheme.

Sjoegreen, B.↗

NASA NTRS2012

Wavefront Sensing for WFIRST with a Linear Optical Model

In this paper we develop methods to use a linear optical model to capture the field dependence of wavefront aberrations in a nonlinear optimization-based phase retrieval algorithm for image-based wavefront sensing. The linear optical model is generated from a ray trace model of the system and allows the system state to be described in terms of mechanical alignment parameters rather than wavefront coefficients. This approach allows joint optimization over images taken at different field points and does not require separate convergence of phase retrieval at individual field points. Because the algorithm exploits field diversity, multiple defocused images per field point are not required for robustness. Furthermore, because it is possible to simultaneously fit images of many stars over the field, it is not necessary to use a fixed defocus to achieve adequate signal-to-noise ratio despite having images with high dynamic range. This allows high performance wavefront sensing using in-focus science data. We applied this technique in a simulation model based on the Wide Field Infrared Survey Telescope (WFIRST) Intermediate Design Reference Mission (IDRM) imager using a linear optical model with 25 field points. We demonstrate sub-thousandth-wave wavefront sensing accuracy in the presence of noise and moderate undersampling for both monochromatic and polychromatic images using 25 high-SNR target stars. Using these high-quality wavefront sensing results, we are able to generate upsampled point-spread functions (PSFs) and use them to determine PSF ellipticity to high accuracy in order to reduce the systematic impact of aberrations on the accuracy of galactic ellipticity determination for weak-lensing science.

Jurling, Alden S.↗

NASA NTRS2017

Navier-Stokes Simulation of UH-60A Rotor/Wake Interaction Using Adaptive Mesh Refinement

High-resolution simulations of rotor/vortex-wake interaction for a UH60-A rotor under BVI and dynamic stallconditions were carried out with the OVERFLOW Navier-Stokes code.a. The normal force and pitching moment variation with azimuth angle were in good overall agreementwith flight-test data, similar to other CFD results reported in the literature.b. The wake-grid resolution did not have a significant effect on the rotor-blade airloads. This surprisingresult indicates that a wake grid spacing of (Delta)S=10% ctip is sufficient for engineering airloads predictionfor hover and forward flight. This assumes high-resolution body grids, high-order spatial accuracy, anda hybrid RANS/DDES turbulence model.c. Three-dimensional dynamic stall was found to occur due the presence of blade-tip vortices passing overa rotor blade on the retreating side. This changed the local airfoil angle of attack, causing stall, unlikethe 2D perspective of pure pitch oscillation of the local airfoil section.

CFD Validation↗

NASA NTRS2018

High-Order Stabilized Finite Elements on Dynamic Meshes

The development of dynamic mesh capability for turbulent flow simulations using the Streamlined Upwind Petrov-Galerkin (SUPG) discretization is described. The current work extends previous research to include high-order spatial accuracy, including the satisfaction of the discrete geometric conservation law (GCL) on curved elements. Two closely-related schemes are described and the ability of these schemes to satisfy the GCL, while also maintaining temporal accuracy and conservation is assessed. Studies indicate that although one scheme discretizes the time derivative in conservative form, both schemes exhibit temporal conservation errors that decrease according to the expected design order of accuracy. The source of the temporal conservation errors is examined, and it is demonstrated that many finite-volume and finite-element schemes can also be expected to have difficulty strictly satisfying conservation in time. The effects on conservation are examined and, while present in the simulations, are seen to be negligible for the problems considered.

Anderson, W. Kyle↗

NASA NTRSDate not supplied

Quantitative Approach for the Accurate CFD Simulation of Hover in Turbulent Flow

Time-dependent Navier-Stokes simulations have been carried out for a V22 rotor in hover using an improved, low-diffusion, HLLE++ upwind algorithm in the OVERFLOW code. Emphasis is placed on lessons learned over the past decade regarding the effects of high-order spatial accuracy, grid resolution, and the use of detached eddy simulation in predicting the rotor performance, i.e., figure-of-merit (FM). A quick-start procedure is described together with a statistical measure of FM convergence that reduces hover computations by 5 times, similar in computational work for forward flight. Furthermore, Cartesian adaptive mesh refinement in the rotor wake revealed a complex turbulent flow with worm-like structures of various scales. These turbulent worms, found computationally more than a decade ago, have recently been observed in a separate German Aerospace Center (DLR) experiment. Moreover, adaptive mesh refinement has been used to resolve the tip-vortex to its correct physical size.

Neal M. Chaderjian↗

NASA NTRSDate not supplied

High-Order Finite-Difference Large-Eddy Simulations of a Supersonic Nozzle

Large-eddy simulations of the flow emanating from supersonic nozzles were carried out for the 6th Propulsion Aerodynamics Workshop to be held at the AIAA SciTech Conference. The purpose of the work is to detail the ability of a high-order of accuracy finite-difference based numerical scheme to accurately compute this flow. Results for both a perfectly expanded and over-expanded flow case are presented. Several complicating factors are discussed: 1) the limitations on the computational grid imposed by the numerical method, 2) the effect of additional dissipation necessary to resolve shock waves and 3) the effect of the nozzle boundary layer on the flow. Results indicate that the simulations replicate the basic flow physics, but there is room for improvement in accuracy. Areas for future study are outlined.

turbulence↗

DOE OSTI2025

Neural operators for stochastic modeling of nonlinear structural system response to natural hazards

Traditionally, neural networks have been employed to learn the mapping between finite-dimensional Euclidean spaces. However, recent research has opened up new horizons, focusing on the utilization of deep neural networks to learn operators capable of mapping infinite-dimensional function spaces. Here, in this work, we employ two state-of-the-art neural operators, the deep operator network (DeepONet) and the Fourier neural operator (FNO) for the prediction of the nonlinear time history response of structural systems exposed to natural hazards, such as earthquakes and windstorms. Specifically, we propose two architectures, a self-adaptive FNO and a fast Fourier transform-based DeepONet (DeepFNOnet), where we employ a FNO beyond the DeepONet to learn the discrepancy between the ground truth and the solution predicted by the DeepONet. To demonstrate the efficiency and applicability of the architectures, two problems are considered. In the first, we use the proposed model to predict the seismic nonlinear dynamic response of a six-story shear building subject to stochastic ground motions. In the second problem, we employ the operators to predict the wind-induced nonlinear dynamic response of a high-rise building while explicitly accounting for the stochastic nature of the wind excitation. In both cases, the trained metamodels achieve high accuracy while being orders of magnitude faster than their corresponding high-fidelity models.

DeepONet↗

DOE OSTI2025

Toward Higher-order Accuracy in Self-gravitating Hydrodynamics

High-order algorithms have emerged in numerical astrophysics as a promising avenue to reduce truncation error (proportional to a power of the linear resolution Δ x ) with only a moderate increase to computational expense. Significant effort has been placed in the development of finite-volume algorithms for (magneto)hydrodynamics; however, state-of-the-art astrophysical simulations tightly couple a plenitude of physics, additionally including gravity, photon transport, cosmic-ray transport, chemistry, and/or diffusion, to name a few. Algorithms frequently operator-split this additional physics (often a first-order error in time) and/or adopt a model wherein their evaluation is limited to second-order accuracy in space. In this work, we present a fourth-order-accurate finite-volume scheme for self-gravitating hydrodynamics on a uniform Cartesian grid. The method supplies source terms for the gravitational acceleration ( ρ g ) and gravitational energy release ( ρ v · g ) associated with fourth-order-accurate solutions to the Poisson equation. Our scheme (1) guarantees the conservation of total linear momentum while (2) decreasing (in proportion to Δ x 4 ) the effects of spurious heating and/or cooling associated with truncation error in the gravity. We demonstrate expected convergence rates for the algorithm by measuring errors in test problems evolving self-gravity modified linear waves and 3D polytropic equilibria. We test robustness of the algorithm by integrating an induced “inside-out” adiabatic collapse. We also discuss a method to smoothly downgrade the solution to second-order spatial accuracy to avoid spurious overshoots near steep density and/or pressure gradients.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1993

Nonreflective boundary conditions for high-order methods

A different approach to nonreflective boundary conditions for the Euler equations is presented. This work is motivated by a need for in and outflow boundary conditions that do not limit the useful accuracy of high-order accurate methods. The primary interest is in the propagation and convection of continuous acoustic and convective waves. This new approach employs the exact solution to finite waves to relate interior values and ambient conditions to boundary values. The method is first presented in one dimension and then generalized to multidimensions. Grid refinement studies are used to demonstrate high-order convergence for both one-dimensional and two-dimensional flows.

Atkins, H. L.↗

NASA NTRS1994

Nonreflective boundary conditions for high-order methods

A different approach to nonreflective boundary conditions for the Euler equations is presented. This work is motivated by a need for inflow and outflow boundary conditions that do not limit the useful accuracy of high-order accurate methods. The primary interest is in the propagation and convection of continuous acoustic and convective waves. This new approach employs the exact solution to finite waves to relate interior values and ambient conditions to boundary values. The method is first presented in one dimension and then generalized to multidimensions. Grid refinement studies are used to demonstrate high-order convergence for both one-dimensional and two-dimensional flows.

Atkins, H.↗

NASA NTRS2013

Time-Accurate Local Time Stepping and High-Order Time CESE Methods for Multi-Dimensional Flows Using Unstructured Meshes

With the wide availability of affordable multiple-core parallel supercomputers, next generation numerical simulations of flow physics are being focused on unsteady computations for problems involving multiple time scales and multiple physics. These simulations require higher solution accuracy than most algorithms and computational fluid dynamics codes currently available. This paper focuses on the developmental effort for high-fidelity multi-dimensional, unstructured-mesh flow solvers using the space-time conservation element, solution element (CESE) framework. Two approaches have been investigated in this research in order to provide high-accuracy, cross-cutting numerical simulations for a variety of flow regimes: 1) time-accurate local time stepping and 2) highorder CESE method. The first approach utilizes consistent numerical formulations in the space-time flux integration to preserve temporal conservation across the cells with different marching time steps. Such approach relieves the stringent time step constraint associated with the smallest time step in the computational domain while preserving temporal accuracy for all the cells. For flows involving multiple scales, both numerical accuracy and efficiency can be significantly enhanced. The second approach extends the current CESE solver to higher-order accuracy. Unlike other existing explicit high-order methods for unstructured meshes, the CESE framework maintains a CFL condition of one for arbitrarily high-order formulations while retaining the same compact stencil as its second-order counterpart. For large-scale unsteady computations, this feature substantially enhances numerical efficiency. Numerical formulations and validations using benchmark problems are discussed in this paper along with realistic examples.

Chang, Chau-Lyan↗