Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HYBRIDIZATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Enhanced copper–carbon nanotube hybrid conductors with titanium adhesion layer

Cu–carbon nanotube (CNT) hybrids combine the advantages of the high electrical conductivity of Cu with the low temperature coefficient of resistance for CNTs, but require enhanced interfacing to improve the electrical performance when exposed to elevated temperatures. In this work, Ti and Ni were investigated as adhesion metals by thermally evaporating 10 nm layers onto a CNT conductor. SEM analysis shows Ni deposits as discrete nanoscale crystallites which coalesce after annealing to 400 °C in H 2 /Ar. Ti deposits uniformly along the CNT surface and is stable over such temperatures. A 100 nm deposition of Cu is shown to delaminate from the CNTs after annealing, and the resistance per length (R/L) increases by 40%. The Cu–Ni–CNT exhibits a 125% increase, while the Cu–Ti–CNT achieves a 12% decrease in R/L, for similar annealing conditions. Thus, Ti emerges as an effective adhesion metal, warranting its use in metal–CNT wire technologies for elevated temperature operation.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hybrid and Inorganic Vacancy-Ordered Double Perovskites A 2 WCl 6

We report hybrid and all-inorganic, vacancy-ordered double perovskites of d 2 W 4+ with the formula A 2 WCl 6 (A = CH 3 NH 3 + , Rb + , and Cs + ). These compounds, which are reddish in color, can be distinguished from structurally similar compounds obtained by hydrothermal methods on the basis of structure, spectroscopic, and magnetic properties. The latter are green and incorporate oxygen, with the actual formula Cs 2 WO x Cl 6–x and distinct optical absorption and emission behavior. Furthermore, the local-moment magnetism of the pure-red d 2 compounds reported here does not correspond to the appropriate Kotani model, suggesting as-yet undiscovered physics in these systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Vacuum Pyrolysis of Hybrid Poplar Milled Wood Lignin with Fourier Transform-Ion Cyclotron Resonance Mass Spectrometry Analysis of Feedstock and Products for the Elucidation of Reaction Mechanisms

The pyrolysis of lignocellulosic materials is a promising technique to produce fuels and chemicals. It is well known that the most abundant products of lignin pyrolysis are oligomeric molecules, known as pyrolytic lignin (PL). The chemical composition of PL has been extensively studied; however, there is still an important debate whether these oligomers are produced directly from the lignin or from the recombination of monomeric pyrolytic products. Existing theories are unable to describe the effect of vacuum on the distribution of pyrolysis products. Hybrid poplar milled wood lignin (MWL) was initially isolated and thoroughly characterized by Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS). Chemical formulas were assigned to each oligomeric compound detected. The MWL was also subjected to vacuum pyrolysis in a modified pyroprobe at 250, 750, and 1000 mbar (absolute pressure), and the resulting liquid products were analyzed by FT-ICR MS. A new strategy to assign structural representations to the oligomeric PL products is proposed, based on the plausible pyrolysis reaction mechanisms of depolymerization/fragmentation applied to original MWL oligomer formulas. Our results support the hypothesis that PL is formed from the removal of moieties from primary lignin pyrolysis products with between three and five aromatic rings. This depolymerization/fragmentation allows the oligomers to reduce their molecular weights to the point where they can be removed from the reaction zone by direct vaporization. Furthermore, this phenomenon highlights the importance of pressure on removal mechanisms and their impact on the molecular weight of the resulting products from lignin pyrolysis.

09 BIOMASS FUELS↗
DOE OSTI2024

Hybrid Quantum Mechanical, Molecular Mechanical, and Machine Learning Potential for Computing Aqueous-Phase Adsorption Free Energies on Metal Surfaces

Performing reliable computer simulations of elementary processes occurring at metal–water interfaces is pivotal for novel catalyst design in sustainable energy applications. Computational catalyst design hinges on the ability to reliably and efficiently compute the potential energy surface (PES) of the system. Here, due to the large system sizes needed for studying processes at liquid water–metal interfaces, these systems can currently not be described using density functional theory (DFT). In this work, we used a hybrid quantum mechanical, molecular mechanical, and machine learning potential for studying the adsorption behavior of phenol, atomic hydrogen, 2-butanol, and 2-butanone on the (0001) facet of Ru under reducing conditions when Ru is not oxidized. Specifically, we describe the adsorbate and the surrounding metal atoms at the DFT level of theory. Here, we also considered the electrostatic field effect of the water molecules on adsorbate–metal interactions. Next, for the water–water and water–adsorbate interactions, we used established classical force fields. Finally, for the water–Ru surface interaction, for which no reliable force fields have been published, we used Behler–Parrinello high-dimensional neural network potentials (HDNNPs). Employing this setup, we used our explicit solvation for metal surface (eSMS) approach to compute the aqueous-phase effect on the low-coverage adsorption of selected molecules and atoms on the (0001) facet of Ru. In agreement with previous experimental and computational studies of oxygenated molecules over transition metal facets, we found that liquid water destabilizes the tested adsorbates on Ru(0001). Interestingly, our findings indicate that adsorbates on Ru are less affected by the presence of an aqueous phase than on other transition metals (e.g., Pt), highlighting the necessity of experimental investigations of Ru-based catalytic systems in liquid water.

Adsorption↗
DOE OSTI2022

Ultralow-Loading Pt/Zn Hybrid Cluster in Zeolite HZSM-5 for Efficient Dehydroaromatization

Minimizing Pt loading without sacrificing catalytic performance is critical, particularly for designing cost-efficient hydrocarbon transformation catalysts. Here, we show that ultralow-loading (0.001–0.05 wt %) Pt- and Zn-functionalized HZSM-5 catalysts, prepared through simple ion exchange and impregnation, are highly active and stable for light alkane dehydroaromatization (DHA). The specific activity of benzene, toluene, and xylene is up to 8.2 mol/g Pt /min (or 1592 min –1 ) over the 0.001 wt % Pt–Zn 2 /HZSM-5 catalyst during ethane DHA at 550 °C under atmospheric pressure. Additionally, such bimetallic Pt x –Zn y /HZSM-5 catalysts are highly stable in contrast to the monometallic Pt/HZSM-5 catalysts. The rate constant of deactivation (k deactiv ), according to the first-order generalized power law equation model, for the bimetallic catalysts is up to 120 times lower than that of the monometallic counterparts, depending on the Pt loading. In conclusion, this breakthrough is achieved through the formation of the [Pt 1 –Zn n ] δ+ hybrid cluster, instead of Pt 0 cluster–proton adducts, in the micropores of the ZSM-5 zeolite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Tunable exciton binding energy in 2D hybrid layered perovskites through donor–acceptor interactions within the organic layer

The strength of electrostatic interactions within semiconductors strongly affects their performance in optoelectronic devices. An important target is the tuning of a material’s exciton binding energy—the energy binding an electron–hole pair through the electrostatic Coulomb force—independent of its electronic band gap. Here, we report on the doping of a family of two-dimensional hybrid perovskites, in which inorganic lead halide sheets alternate with naphthalene-based organic layers, with tetrachloro-1,2-benzoquinone (TCBQ). For four out of seven n = 1 perovskites, the incorporation of the electron-accepting TCBQ dopant into the organic sublattice containing the electron-donating naphthalene species enabled the tuning of the materials’ 1s exciton binding energy. The naphthalene–TCBQ electron donor–acceptor interactions increased the electrostatic screening of the exciton, in turn lowering its binding energy relative to the undoped perovskite—by almost 50% in one system. Structural and optical characterization showed that the inorganic lattice is not significantly perturbed even though the layer-to-layer spacing increases upon molecular dopant incorporation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Flow and extraction of energy and charge carriers in hybrid plasmonic nanostructures

Strong interactions of electromagnetic fields with plasmonic nanomaterials have been exploited in various applications. These applications have centred on plasmon-enhanced scattering rates in nearby molecules or plasmon-induced heating. A question that has emerged recently is whether it is possible to use plasmonic nanostructures in a range of hot electron (hole) applications, including photocatalysis, photovoltaics and photodetection. These applications require coupling of a plasmonic component, which amplifies the interaction of light with the material, to an attached non-plasmonic component that extracts this energy in the form of electronic excitations to perform a function. Here, in this Perspective, we discuss recent work in the emerging field of hybrid plasmonics. We focus on fundamental questions related to the nanoscopic flow of energy and excited charge carriers in these multicomponent materials. We also address critical misconceptions, challenges and opportunities that require more attention.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1975

Design guidelines for hybrid microcircuits; organic adhesives for hybrid microcircuits

The properties of organic adhesives were studied to acquire an adequate information base to generate a guideline document for the selection of adhesives for use in high reliability hybrid microcircuits. Specific areas covered include: (1) alternate methods for determining the outgassing of cured adhesives; (2) effects of long term aging at 150C on the electrical properties of conductive adhesives; (3) effects of shelf life age on adhesive characteristics; (4) bond strengths of electrically conductive adhesives on thick film gold metallization, (5) a copper filled adhesive; (6) effects of products outgassed from cured adhesives on device electrical parameters; (7) metal migration from electrically conductive adhesives; and (8) ionic content of electrically insulative adhesives. The tests performed during these investigations are described, and the results obtained are discussed in detail.

Perkins, K. L.↗
DOE OSTI2024

Battery-ultracapacitor hybrid energy storage system architecture for mild-hybrid power systems

A mild-hybrid energy storage system architecture is provided, comprising: a battery; an ultracapacitor connected in parallel with the battery; a passive battery pre-charge circuit connected between a terminal of the battery and a DC bus; a battery main contactor connected in parallel with the battery pre-charge circuit between the terminal of the battery and the DC bus; a passive ultracapacitor pre-charge circuit connected between a terminal of the ultracapacitor and the DC bus; an ultracapacitor main contactor connected in parallel with the ultracapacitor pre-charge circuit between the terminal of the ultracapacitor and the DC bus; and a control module configured to independently control operation of the battery pre-charge circuit, the battery main contactor, the ultracapacitor pre-charge circuit and the ultracapacitor main contactor.

Varigonda, Subbarao↗
DOE OSTI2021

Impact of Hybrid Energy Storage System (HESS) Topologies on Performance: Exploration for Hydropower Hybrids

We investigate the technical performance of six HESS topologies integrated with run-of-river (ROR) hydropower to provide frequency support. We choose ROR hydropower because there are 23 GW of installed ROR hydropower in the U.S. and integrating these plants with energy storage could boost their contribution to grid services. We focus on HESSs composed of batteries and ultracapacitors because batteries are cost effective for storing energy but degrade more quickly as a function of cycling. In contrast, ultracapacitors can be cycled millions of times and are cost effective for quick injections of power. We find that active HESS topologies demonstrate the best overall improvement to grid frequency during a contingency while adhering to the power ramping limits of the HESS devices. Future work will investigate other services to identify if one HESS topology performs best for all services of interest or, more likely, different HESS topologies are best suited for specific services.

13 HYDRO ENERGY↗