Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HARMONIC EXCITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2000

Nondestructive Determination of Bond Strength

Although many nondestructive techniques have been applied to detect disbonds in adhesive joints, no absolutely reliable nondestructive method has been developed to detect poor adhesion and evaluate the strength of bonded joints prior to the present work which used nonlinear ultrasonic methods to investigate adhesive bond cure conditions. Previously, a variety of linear and nonlinear ultrasonic methods with water coupling had been used to study aluminum-adhesive-aluminum laminates, prepared under different adhesive curing conditions, for possible bond strength determination. Therefore, in the course of this research effort, a variety of finite-amplitude experimental methods which could possibly differentiate various cure conditions were investigated, including normal and oblique incidence approaches based on nonlinear harmonic generation as well as several non-collinear two-wave interaction approaches. Test samples were mechanically scanned in various ways with respect to the focus of a transmitting transducer operated at several variable excitation frequencies and excitation levels. Even when powerful sample-related resonances were exploited by means of a frequency scanning approach, it was very difficult to isolate the nonlinear characteristics of adhesive bonds. However, a multi-frequency multi-power approach was quite successful and reliable. Ultrasonic tone burst signals at increasing power levels, over a wide frequency range, were transmitted through each bond specimen to determine its excitation dependent nonlinear harmonic resonance behavior. Relative amplitude changes were observed particularly in the higher harmonic spectral data and analyzed using a local displacement and strain analysis in the linear approximation. Two analysis approaches of the excitation-dependent data at specific resonances were found to be quite promising. One of these approaches may represent a very robust algorithm for classifying an adhesive bond as being properly cured or not. Another approach, in addition to differentiation between various cure conditions, may even provide information with respect to the bond strength. Several technical papers were published during the course of this research and a summary is presented in the Ph.D. dissertation of Tobias P. Berndt, a graduate student financially supported by this NASA Grant.

Source record↗
NASA NTRS1986

Stress waves in isotropic elastic plate excited by circular transducer

Steady state harmonic stress waves in an isotropic elastic plate excited on one face by a circular transducer are analyzed theoretically. The transmitting transducer transforms an electrical voltage into a uniform normal stress at the top of the plate. To solve the boundary value problem,the radiation into a half-space is considered. The receiving transducer produces an electrical voltage proportional to the average spatially integrated normal stress over its face due to an incident wave. A numerical procedure is given to evaluate the frequency response at a receiving point due to a multiply reflected wave in the near field. Its stability and convergence are discussed. Parameterization plots which determine the particular wave whose frequency response has maximum magnitude compared with other multiple reflected waves are given for a range of values of dimensionless parameters. The effects of changes in the values of the parameters are discussed.

Williams, J. H., Jr.↗
NASA NTRSDate not supplied

Influence of Source Type on Acoustic Liner Impedance in No Flow

This paper presents findings from a study conducted under a challenge of the International Forum for Aviation Research (IFAR), which consists of partners from various national research labs around the world. A series of normal incidence impedance tube tests are performed to identify differences in acoustic impedance for various types of source excitations. These source types include single-tone, multitone, and broadband. To better understand these differences, six unique acoustic liners are tested using these source types at various sound pressure levels and frequencies. Multitone sources of up to five discrete frequencies at a time (both harmonic and nonharmonic excitations) are included. Predictions are also shown to assess capability of capturing source type in the acoustic liner design process. It is determined that impedance behavior due to single-tone and broadband source excitations is largely well-understood and predictable. Multitone source excitations, however, yield unpredictable impedance characteristics that appear highly dependent on the summed coherent waveform that is incident upon the acoustic liner. Future work on this topic is warranted to improve impedance prediction capability of multitone excitation.

acoustic liner impedance multitone prediction sour↗
NASA NTRS2011

Search for Gravitational Waves Associated with the August 2006 Timing Glitch of the Vela Pulsar

The physical mechanisms responsible for pulsar timing glitches are thought to excite quasinormal mode oscillations in their parent neutron star that couple to gravitational-wave emission, In August 2006, a timing glitch was observed in the radio emission of PSR B0833-45, the Vela pulsar. At the time of the glitch, the two colocated Hanford gravitational-wave detectors of the Laser Interferometer Gravitational-wave observatory (LIGO) were operational and taking data as part of the fifth LIGO science run (S5). We present the first direct search for the gravitational-wave emission associated with oscillations of the fundamental quadrupole mode excited by a pulsar timing glitch. No gravitational-wave detection candidate was found. We place Bayesian 90% confidence upper limits of 6,3 x 10(exp -21) to 1.4 x 10(exp -20) on the peak: intrinsic strain amplitude of gravitational-wave ring-down signals, depending on which spherical harmonic mode is excited. The corresponding range of energy upper limits is 5.0 x 10(exp 44) to 1.3 x 10(exp 45) erg.

Camp, J. B.↗
NASA NTRS1989

Three-dimensional wave packets and instability waves in free shear layers and their receptivity

A study is made of the evolution of strongly three-dimensional disturbances which are generated by a point force in a parallel mixing layer. When the input force is a pulse, a wave packet develops whose wavefronts are approximately parallel to the spanwise direction. This is in sharp contrast to a wave packet in a wall boundary layer for which the wavefronts are strongly curved. On the other hand, when the input disturbance is oscillating harmonically in time, a spatially growing instability wave develops in a downstream wedge of (x, z)-space. The size of this wedge, as a function of excitation frequency and velocity ratio, is determined. The receptivity of the shear layer to pulse-type and harmonic excitation is also studied. It is found that the shear layer is especially sensitive to relatively high-frequency forcing on its centreline.

Balsa, Thomas F.↗
NASA NTRS2007

Coupled Groups of g-Modes in a Sun with Mixed Core

Groups of linear g-modes can sum to create long-lived nonlinear oscillations in small "hot volumes" very deep in the Sun that help drive the modes. In these volumes (dimensions -10 Mm), the time average rate of He-3 burning doubles as temperature fluctuations exceed 10% and rises by an order of magnitude for fluctuations of 25%. To be consistent with locally large motions, we impose a mixed shell on an otherwise standard solar model before computing g-mode solutions. Mixing in the assumed shell r = (0.10+/-0.03) R(sub sun) is rapid (<<10(exp 6) yr) with slower mixing somewhat beyond. If l is the principal spherical harmonic index, a set of g-modes for any single l less than or equal to 15 with five consecutive radial harmonics can be excited with nearly linear thermal amplitudes, A(sub T) less than or equal to 0.053, throughout the star and a fractional temperature fluctuation in its hot volume of (Delta)T/T less than or equal to 0.18. These thresholds for excitation will become smaller when sets for several values of l are computed simultaneously. There is some evidence for the rotation of g-mode sets in the long solar activity record and g-mode upward wave flux has been suggested to explain the 1.3 yr reversing flows tentatively detected below the Sun's convective envelope (CE). The large local amplitudes needed for excitation implies that g-modes may transport a non-negligible fraction of the solar luminosity, yet their near linear amplitudes outside the hot volume suggests amplitudes over most of the solar surface that would be barely detectable for l > 3. A formalism is presented for summing the g-modes and estimating growth rates under the approximation that modes are strictly linear except in a hot volume which holds only a few percent of mode kinetic energy. Finally over the range 2 less than or equal to l less than or equal to 30, we summed all zonal harmonics, m, for a given l and computed the relative angular orientations that would release the most nuclear energy. This should be close to the physically preferred angular state of such a family and a few examples were displayed.

Wolff, Charles L.↗
NASA NTRS1982

Helicopter vibration suppression using simple pendulum absorbers on the rotor blade

A comprehensive anaytical design procedure for the installation of simple pendulums on the blades of a helicopter rotor to suppress the root reactions is presented. A frequency response anaysis is conducted of typical rotor blades excited by a harmonic variation of spanwise airload distributions as well as a concentrated load at the tip. The results presented included the effect of pendulum tuning on the minimization of the hub reactions. It is found that a properly designed flapping pendulum attenuates the root out-of-plane force and moment whereas the optimum designed lead-lag pendulum attenuates the root in-plane reactions. For optimum pendulum tuning the parameters to be determined are the pendulum uncoupled natural frequency, the pendulum spanwise location and its mass. It is found that the optimum pendulum frequency is in the vicinity of the excitation frequency. For the optimum pendulum a parametric study is conducted. The parameters varied include prepitch, pretwist, precone and pendulum hinge offset.

Pierce, G. A.↗
NASA NTRS1974

Effect of nonsymmetrical flow resistance upon orifice impedance resistance

A nonreactive orifice in an infinite baffle is analyzed. The pressure difference delta across the orifice varies sinusoidally with amplitude 1.0 and average value -P. The orifice resistance, delta p is discontinuous at zero velocity and exhibits the constant values R sub + and R sub - for u 0 and u 0, respectively. The resultant velocity has power in all harmonics of the excitation frequency. A quasi-linear resistance is defined and found to be relatively insensitive to the presence or absence of a resonant backing cavity; however, it does vary from 1.33 R sub + to 0.67 R sub + for a resistance ratio R sub +/R sub - between 0.5 and 2.0.

Posey, J. W.↗
NASA NTRS1981

Helicopter vibration suppression using simple pendulum absorbers on the rotor blade

A design procedure is presented for the installation of simple pendulums on the blades of a helicopter rotor to suppress the root reactions. The procedure consists of a frequency response analysis for a hingeless rotor blade excited by a harmonic variation of spanwise airload distributions during forward flight, as well as a concentrated load at the tip. The structural modeling of the blade provides for elastic degrees of freedom in flap and lead-lag bending plus torsion. Simple flap and lead-lag pendulums are considered individually. Using a rational order scheme, the general nonlinear equations of motion are linearized. A quasi-steady aerodynamic representation is used in the formation of the airloads. The solution of the system equations derives from their representation as a transfer matrix. The results include the effect of pendulum tuning on the minimization of the hub reactions.

Hamouda, M.-N. H.↗
NASA NTRS1986

Blade loss transient dynamics analysis, volume 1. Task 2: TETRA 2 theoretical development

The theoretical development of the forced steady state analysis of the structural dynamic response of a turbine engine having nonlinear connecting elements is discussed. Based on modal synthesis, and the principle of harmonic balance, the governing relations are the compatibility of displacements at the nonlinear connecting elements. There are four displacement compatibility equations at each nonlinear connection, which are solved by iteration for the principle harmonic of the excitation frequency. The resulting computer program, TETRA 2, combines the original TETRA transient analysis (with flexible bladed disk) with the steady state capability. A more versatile nonlinear rub or bearing element which contains a hardening (or softening) spring, with or without deadband, is also incorporated.

Gallardo, Vincente C.↗
NASA NTRS1992

Nonlinear analyses of composite aerospace structures in sonic fatigue

The primary research effort of this project is the development of analytical methods for the prediction of nonlinear random response of composite aerospace structures subjected to combined acoustic and thermal loads. The progress, accomplishments, and future plans of three random response research topics are discussed, namely acoustics-structure interactions using boundary/finite element methods, nonlinear vibrations of beams and composite plates under harmonic and random excitations, and numerical simulation of the nonlinear response of composite plates under combined thermal and acoustic loading.

Mei, Chuh↗
NASA NTRS1991

Active isolation of vibrations with adaptive structures

Vibration transmission in structures is controlled by means of a technique which employs distributed arrays of piezoelectric transducers bonded to the supporting structure. Distributed PVDF piezoelectric strips are employed as error sensors, and a two-channel feedforward adaptive LMS algorithm is used for minimizing error signals and thereby controlling the structure. A harmonic force input excites a thick plate, and a receiving plate is configured with three pairs of piezoelectric actuators. Modal analyses are performed to determine the resonant frequencies of the system, and a scanning laser vibrometer is used to study the shape of the response of the receiving plate during excitation with and without the control algorithm. Efficient active isolation of the vibrations is achieved with modal suppression, and good control is noted in the on-resonance cases in which increased numbers of PVDF sensors and piezoelectric actuators are employed.

Guigou, C.↗
NASA NTRS1996

Structural Acoustic Response of Shape Memory Alloy Hybrid Composite Panels

A method has been developed to predict the structural acoustic response of shape memory alloy hybrid composite panels subjected to acoustic excitation. The panel is modeled by a finite element analysis and the radiated field is predicted using Rayleigh's integral. Transmission loss predictions for the case of an aluminum panel excited by a harmonic acoustic pressure are shown to compare very well with a classical analysis. Predictions of the normal velocity response and transmitted acoustic pressure for a clamped aluminum panel show excellent agreement with experimental measurements. Predicted transmission loss performance for a composite panel with and without shape memory alloy reinforcement are also presented. The preliminary results demonstrate that the transmission loss can be significantly increased with shape memory alloy reinforcement.

Turner, Travis L.↗
NASA NTRS2004

A Spectral Analysis Approach for Acoustic Radiation from Composite Panels

A method is developed to predict the vibration response of a composite panel and the resulting far-field acoustic radiation due to acoustic excitation. The acoustic excitation is assumed to consist of obliquely incident plane waves. The panel is modeled by a finite element analysis and the radiated field is predicted using Rayleigh's integral. The approach can easily include other effects such as shape memory alloy (SMA) ber reinforcement, large detection thermal postbuckling, and non-symmetric SMA distribution or lamination. Transmission loss predictions for the case of an aluminum panel excited by a harmonic acoustic pressure are shown to compare very well with a classical analysis. Results for a composite panel with and without shape memory alloy reinforcement are also presented. The preliminary results demonstrate that the transmission loss can be significantly increased with shape memory alloy reinforcement. The mechanisms for further transmission loss improvement are identified and discussed.

Turner, Travis L.↗
NASA NTRS2011

Preliminary Assessment of the Interior Noise Environment in the Large Civil Tiltrotor (LCTR2)

The second-generation Large Civil Tiltrotor (LCTR2) serves as a representative vehicle under the NASA Fundamental Aeronautics Program (FAP) Subsonic Rotary Wing (SRW) project with a design goal to transport 90 passengers over a distance of 1800 km at a speed of 550 km/hr. The tiltrotor combines the vertical lift capability of a helicopter with the speed, altitude, and range of a turboprop airplane. The blade-passage frequency of the four-bladed rotor is as low as 6.9 Hz during cruise conditions. The resulting low-frequency acoustic excitation and its harmonics, combined with the anticipated use of lightweight composite and sandwich materials for the fuselage sidewall, may pose a challenge to achieving acceptable interior noise levels. The objective of the present study is to perform a preliminary assessment of the expected interior noise environment in the LCTR2 cabin. The approach includes a combination of semi-empirical, analytical, and statistical energy analysis methods. Because the LCTR2 is a notional vehicle, the prediction approach was also applied to the XV-15 tiltrotor and Bombardier Q400 turobprop aircraft to compare predictions with publicly available experimental data. Guidance for the expected interior noise levels in the LCTR2 was obtained by considering both the predicted exterior noise levels and the transmission loss of a basic fuselage sidewall consisting of a skin, porous layer and a trim panel. Structural and acoustic resonances are expected to coincide with low order harmonics of the blade passage frequency. The estimated sound pressure levels in the LCTR2 may not be acceptable when evaluated against known characteristics of human response to low frequency sound.

Grosveld, Ferdinand W.↗
NASA NTRS1985

Stress waves in an isotropic elastic plate excited by a circular transducer

Steady state harmonic stress waves in an isotropic elastic plate excited on one face by a circular transducer are analyzed theoretically. The transmitting transducer transforms an electrical voltage into a uniform normal stress at the top of the plate. To solve the boundary value problem, the radiation into a half-space is considered. The receiving transducer produces an electrical voltage proportional to the average spatially integrated normal stress over its face due to an incident wave. A numerical procedure is given to evaluate the frequency response at a receiving point due to a multiply reflected wave in the near field. Its stability and convergence are discussed. Parameterization plots which determine the particular wave whose frequency response has maximum magnitude compared with other multiple reflected waves are given for a range of values of dimensionless parameters. The effects of changes in the values of the parameters are discussed.

Karagulle, H.↗
NASA NTRS1987

A theoretical study of the excited states of Ag3

Calculations of the excited states of the Ag3 molecule are reported. The excitation energies, geometries, derived harmonic frequencies, and transition moments are given and discussed. The results of other calculations of the excited states are reviewed and assessed.

Walch, Stephen P.↗