Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Grid Logging”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Fast mix table construction for material discretization

An effective hybrid Monte Carlo-deterministic implementation typically requires the approximation of a continuous geometry description with a discretized piecewise-constant material field. The inherent geometry discretization error can be reduced somewhat by using material mixing, where multiple materials inside a discrete mesh voxel are homogenized. Material mixing requires the construction of a 'mix table,' which stores the volume fractions in every mixture so that multiple voxels with similar compositions can reference the same mixture. Mix table construction is a potentially expensive serial operation for large problems with many materials and voxels. We formulate an efficient algorithm to construct a sparse mix table in O(number of voxels x log number of mixtures) time. The new algorithm is implemented in ADVANTG and used to discretize continuous geometries onto a structured Cartesian grid. When applied to an end-of-life MCNP model of the High Flux Isotope Reactor with 270 distinct materials, the new method improves the material mixing time by a factor of 100 compared to a naive mix table implementation. (authors)

97 MATHEMATICS AND COMPUTING↗

Model atmospheres for M (sub)dwarf stars. 1: The base model grid

We have calculated a grid of more than 700 model atmospheres valid for a wide range of parameters encompassing the coolest known M dwarfs, M subdwarfs, and brown dwarf candidates: 1500 less than or equal to T(sub eff) less than or equal to 4000 K, 3.5 less than or equal to log g less than or equal to 5.5, and -4.0 less than or equal to (M/H) less than or equal to +0.5. Our equation of state includes 105 molecules and up to 27 ionization stages of 39 elements. In the calculations of the base grid of model atmospheres presented here, we include over 300 molecular bands of four molecules (TiO, VO, CaH, FeH) in the JOLA approximation, the water opacity of Ludwig (1971), collision-induced opacities, b-f and f-f atomic processes, as well as about 2 million spectral lines selected from a list with more than 42 million atomic and 24 million molecular (H2, CH, NH, OH, MgH, SiH, C2, CN, CO, SiO) lines. High-resolution synthetic spectra are obtained using an opacity sampling method. The model atmospheres and spectra are calculated with the generalized stellar atmosphere code PHOENIX, assuming LTE, plane-parallel geometry, energy (radiative plus convective) conservation, and hydrostatic equilibrium. The model spectra give close agreement with observations of M dwarfs across a wide spectral range from the blue to the near-IR, with one notable exception: the fit to the water bands. We discuss several practical applications of our model grid, e.g., broadband colors derived from the synthetic spectra. In light of current efforts to identify genuine brown dwarfs, we also show how low-resolution spectra of cool dwarfs vary with surface gravity, and how the high-regulation line profile of the Li I resonance doublet depends on the Li abundance.

Allard, France↗

The energy distributions of B supergiants in the Large Magellanic Cloud

It is shown that line-blanketed, LTE, plane-parallel model atmosphere calculations provide excellent fits to the ultraviolet-through-visual energy distributions of B supergiants in the Large Magellanic Cloud. The models were computed using Kurucz's (1979) ATLAS atmosphere program, but with lower gravities than were contained in Kurucz's published model grid. The ultraviolet continua of low gravity stars are found to be sensitive to changes in temperature and gravity. Measurements of Teff and log g for ten LMC B supergiants from model atmosphere fits to the energy distributions yield estimates of their radii, luminosities, and masses. Model atmosphere fits suggest that the late B supergiants have significantly lower masses than the earlier B types of the same luminosity, contrary to stellar evolution theory which predicts that B supergiants are in a post-core hydrogen burning phase and should evolve very quickly and at essentially constant mass.

Fitzpatrick, Edward L.↗

Fast Mix Table Construction for Material Discretization

An effective hybrid Monte Carlo--deterministic implementation typically requires the approximation of a continuous geometry description with a discretized piecewise-constant material field. The inherent geometry discretization error can be reduced somewhat by using material mixing, where multiple materials inside a discrete mesh voxel are homogenized. Material mixing requires the construction of a ``mix table,'' which stores the volume fractions in every mixture so that multiple voxels with similar compositions can reference the same mixture. Mix table construction is a potentially expensive serial operation for large problems with many materials and voxels. We formulate an efficient algorithm to construct a sparse mix table in $O(\text{number of voxels}\times \log \text{number of mixtures})$ time. The new algorithm is implemented in ADVANTG and used to discretize continuous geometries onto a structured Cartesian grid. When applied to an end-of-life MCNP model of the High Flux Isotope Reactor with 270 distinct materials, the new method improves the material mixing time by a factor of 100 compared to a naive mix table implementation.

Johnson, Seth R↗

Error and Complexity Analysis for a Collocation-Grid-Projection Plus Precorrected-FFT Algorithm for Solving Potential Integral Equations with LaPlace or Helmholtz Kernels

In this paper we derive error bounds for a collocation-grid-projection scheme tuned for use in multilevel methods for solving boundary-element discretizations of potential integral equations. The grid-projection scheme is then combined with a precorrected FFT style multilevel method for solving potential integral equations with 1/r and e(sup ikr)/r kernels. A complexity analysis of this combined method is given to show that for homogeneous problems, the method is order n natural log n nearly independent of the kernel. In addition, it is shown analytically and experimentally that for an inhomogeneity generated by a very finely discretized surface, the combined method slows to order n(sup 4/3). Finally, examples are given to show that the collocation-based grid-projection plus precorrected-FFT scheme is competitive with fast-multipole algorithms when considering realistic problems and 1/r kernels, but can be used over a range of spatial frequencies with only a small performance penalty.

Phillips, J. R.↗

THE MASS MIXING LENGTH IN CONVECTIVE STELLAR ENVELOPES

The scale length over which convection mixes mass in a star can be calculated as the inverse of the vertical derivative of the unidirectional (up or down) mass flux. This is related to the mixing length in the mixing length theory of stellar convection. We give the ratio of mass mixing length to pressure scale height for a grid of three-dimensional surface convection simulations, covering from 4300 K to 6900 K on the main sequence, and up to giants at log g = 2.2, all for solar composition. These simulations also confirm what is already known from solar simulations that convection does not proceed by discrete convective elements, but rather as a continuous, slow, smooth, warm upflow and turbulent, entropy deficient, fast down drafts. This convective topology also results in mixing on a scale comparable to the classic mixing length formulation, and is simply a consequence of mass conservation on flows in a stratified atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Integrated Modeling Report for CO 2 Storage with Enhanced Oil Recovery in Northern Michigan

The Midwest Regional Carbon Sequestration Partnership (MRCSP) was founded in 2003 as part of the U.S. Department of Energy’s (DOE’s) Regional Carbon Sequestration Partnership initiative. Since its founding, MRCSP has made significant strides toward making CCUS a viable option for states in the region. The public/private consortium, funded through the DOE Regional Carbon Sequestration Initiative, brings together nearly 40 industry partners and 10 states. Battelle, as the project lead, oversees research, development and operations and coordinates activities among the partners. The incremental, phased approach has built a valuable knowledge base for the industry and paved the way for commercial-scale adoption of CCUS technologies. From 2008 to 2020, MRCSP Phase III focused on the development of large-scale injection projects. This report is part of a series of reports prepared under the Midwestern Regional Carbon Sequestration Partnership (MRCSP) Phase III (Development Phase). These reports summarize and detail the findings of the work conducted under the Phase III project. MRCSP has been investigating various reservoir characterization and modeling technologies related to Carbon Capture, Utilization, and Storage (CCUS) in conjunction with carbon dioxide enhanced oil recovery (CO 2 -EOR) operations in multiple Silurian-age (Niagaran), oil-bearing, carbonate pinnacle reefs in northern Michigan, USA. This report provides a comprehensive discussion of reservoir modeling studies that were conducted for tracking oil production, forecasting CO 2 plume migration, and estimating associated storage in a number of reefs that were at different stages of their CO 2 -EOR life cycle. The modeling process for simulating oil production, CO 2 injection, and associated storage in these reefs entails two phases. The first phase, geologic framework modeling, integrates all pertinent geological and geophysical data (from logs, cores and seismic surveys) about reservoir structure, geometry, rock types, and property distributions (porosity, permeability, water saturation) into a 3-D distributed grid-based static earth model (SEM). The second phase, dynamic reservoir modeling, uses the SEM as a platform to simulate the movement of oil, gas, water, and CO 2 within the reservoir during primary hydrocarbon production, as well as during subsequent phases such as CO 2 -injection assisted EOR, plume migration, and associated storage. In addition, an assessment of coupled process effects is also carried out, where the impacts of geochemical and geo-mechanical processed induced by CO 2 injection are studied.

01 COAL, LIGNITE, AND PEAT↗

Hubble Space Telescope high resolution spectroscoy of the exposed white dwarf in the dwarf nova VW Hydri in quiescence: A rapidly rotating white dwarf

We obtained a far-ultraviolet spectrum of the dwarf nova VW Hyi in quiescence, with the Hubble Space Telescope Goddard High Resolution Spectrograph covering the region of the Si iv lambda(lambda)1393, 1402 resonance doublet. The broad, shallow Si iv doublet feature is fully resolved, has a total equivalent width of 2.8 A, and is the first metal absorption feature to be clearly detected in the exposed white dwarf. Our synthetic spectral analysis, using a model grid constructed with the code TLUSTY, resulted in a reasonable fit to a white dwarf photosphere with T(sub eff) = 22,000 +/- 2000 K, log g = 8.0 +/- 0.3, an approximately solar Si/H abundance, and a rotational velocity, v sin i approximately equal to 600 km/s. This rotation rate, while not definitive because it is based upon just one line transition, is 20% of the Keplerian (breakup) velocity of the white dwarf and hence does not account for the unexpectedly low boundary-layer luminosity inferred from the soft-X-ray/extreme ultra-violet bands where most of the boundary-layer luminosity should be radiated. The predicted boundary-layer luminosity for a 0.6 solar mass white dwarf accreting at the rate 10(exp -10) solar mass/yr and rotating at 600 km/s, corresponding to VW Hyi in quiescence, is 2 x 10(exp 32) ergs/s when proper account is taken of the rotational kinetic energy going into spinning up the white dwarf. If the boundary-layer area is equal to that of the white dwarf, then T(sub bl) = 24,000 K. This is essentially identical to the photspheric luminosity and temperature determined in far-ultraviolet photospheric analyses. If the boundary-layer area is 10(exp -3) of the white dwarf surface area, then T(sub bl) = 136,000 K.

Sion, Edward M.↗

Modeling the near-ultraviolet band of GK stars. III. Dependence on abundance pattern

We extend the grid of non-LTE (NLTE) models presented in Paper II to explore variations in abundance pattern in two ways: (1) the adoption of the Asplund et al. (GASS10) abundances, (2) for stars of metallicity, [M/H], of –0.5, the adoption of a non-solar enhancement of α-elements by +0.3 dex. Moreover, our grid of synthetic spectral energy distributions (SEDs) is interpolated to a finer numerical resolution in both T {sub eff} (ΔT {sub eff} = 25 K) and log g (Δlog g = 0.25). We compare the values of T {sub eff} and log g inferred from fitting LTE and NLTE SEDs to observed SEDs throughout the entire visible band, and in an ad hoc 'blue' band. We compare our spectrophotometrically derived T {sub eff} values to a variety of T {sub eff} calibrations, including more empirical ones, drawn from the literature. For stars of solar metallicity, we find that the adoption of the GASS10 abundances lowers the inferred T {sub eff} value by 25-50 K for late-type giants, and NLTE models computed with the GASS10 abundances give T {sub eff} results that are marginally in better agreement with other T {sub eff} calibrations. For stars of [M/H] = –0.5 there is marginal evidence that adoption of α-enhancement further lowers the derived T {sub eff} value by 50 K. Stellar parameters inferred from fitting NLTE models to SEDs are more dependent than LTE models on the wavelength region being fitted, and we find that the effect depends on how heavily line blanketed the fitting region is, whether the fitting region is to the blue of the Wien peak of the star's SED, or both.

79 ASTRONOMY AND ASTROPHYSICS↗

Assessment of CO 2 Storage Resources in Depleted Oil and Gas Fields in the Ship Shoal Area, Gulf of Mexico

The Gulf of Mexico is one of the most important regions in the United States for energy resources and infrastructure. Gulf of Mexico federal offshore oil and gas production accounts for 17% of total U.S. crude oil production and 5% of total U.S. gas production (EIA Gulf of Mexico Fact Sheet). This region presents an excellent combination of high need and significant opportunity for large scale geologic storage of CO 2 . The Ship Shoal Area is located about 20 miles offshore Louisiana within the Gulf Coast federal waters. Miocene and Pliocene sediments in the Ship Shoal Area are proven to provide excellent and secure traps for oil and gas. The Ship Shoal Area contains a large number of depleted oil and gas fields either currently abandoned, or planned for abandonment by 2025, which may provide very significant potential CO 2 storage capacity. GeoMechanics Technologies conducted a comprehensive research project to better characterize Neogene sediments in the Ship Shoal Area for high volume CO 2 storage. The data generated from literature, well data, well log, and formation evaluation were input into Rockwork 16 geologic software to create a detailed geologic model for the Ship Shoal study area. The geologic grids were then fed into TOUGH2, the gas migration model software and FLAC 3D, the geomechanical model software. The fluid flow modeling for both the Miocene and Pliocene simulation from both Block 107 and Block 84 indicated that Pliocene and Miocene are a good reservoir for the CO 2 sequestration. Thirty years of CO 2 injection (at a rate of 1 million metric tons CO 2 per year) and 30 years of observation simulations were run with the fluid flow modeling. The 3D geomechanical modeling for Ship Shoal Block 107 and Block 84 were developed to evaluate induced surface deformation and potential fault reactivation after 30 years CO 2 injection at base of Pliocene and at upper Miocene injection locations. Evaluation results indicate low to no risks for fault slips or fault reactivation. Twelve well bores and 76 well bores for Ship Shoal Blocks 84 and 107 respectively were reviewed for their cement history. Most wells (57 out of 76 and 7 out of 12 wells in Ship Shoal Block 107 and 84 respectively) have good integrity. Nineteen and 5 wells (in Ship Shoal Block 107 and 84 respectively) with no top plug, incomplete cement or Plug and Abandonment information are given yellow cautionary indicators. These cautionary wells may provide leakage paths of CO 2 through the well bores to the USDWs. Using our Quantitative Risk & Decision Analysis Tool (QRDAT) for caprock integrity evaluation, we compared Ship Shoal’s risk to that of In Salah, Sleipner, Kevin Dome, Loudon, Illinois Industrial CCS and Wilmington Graben. We found the risk at the Ship Shoal Blocks 84 and 107 fields are similar to the known CO 2 active sequestration sites, but lower than the Wilmington Graben turbidities offshore California studied site. The risk of natural seismicity in the Gulf of Mexico is relatively low. Geomechanics Technologies has documented the top 25 CO 2 emission sources within the close proximity of the Ship Shoal Block 84 and 107 fields. All the offshore and onshore pipelines have been digitized and can be viewed in an interactive website (http://www.geomechanicstech.com/shipshoal.html). We also performed a feasibility study on the potential for converting existing oil or gas pipelines for CO 2 transport. There are abandoned, idled and retired onshore and offshore pipelines. However, there is no standard specification for maximum pipeline pressures needed for CO 2 transport. It is a function of design, materials, and testing provided; thus it will be the responsibility of the pipeline operator to correctly determine, maintain and operate within the limits of the pipelines. There are a few transit corridors extending from onshore Louisiana (Cailou Bay) to offshore trunk-lines. The cost for constructing a pipeline has increased about 46% from 2015 to an average cost of $5,064,046 per mile in 2016. We use the NETL CO 2 storage resource mass estimate to calculate the potential resources for Ship Shoal Block 84 and 107 fields using the depleted oil and gas reservoir volume and sand volume generated from our geologic modeling. The estimated storage resource results are greater when using the sand volumes derived through geologic modeling than the oil and gas reservoir data. The difference is due to the depleted oil and gas reservoir information not accounting for the water-flooded sand located below the oil/gas-water contact or unproductive sand units. Resource calculation using the sand volume obtained through geologic modeling overestimate the storage capacity as the model accounts for all sand within the formation, not just the interconnected sand.

02 PETROLEUM↗

An efficient, high-order probabilistic collocation method on sparse grids for three-dimensional flow and solute transport in randomly heterogeneous porous media

In this study, a probabilistic collocation method (PCM) on sparse grids was used to solve stochastic equations describing flow and transport in three-dimensional in saturated, randomly heterogeneous porous media. Karhunen-Lo\`{e}ve (KL) decomposition was used to represent the three-dimensional log hydraulic conductivity $Y=\ln K_s$. The hydraulic head $h$ and average pore-velocity $\bf v$ were obtained by solving the three-dimensional continuity equation coupled with Darcy's law with random hydraulic conductivity field. The concentration was computed by solving a three-dimensional stochastic advection-dispersion equation with stochastic average pore-velocity $\bf v$ computed from Darcy's law. PCM is an extension of the generalized polynomial chaos (gPC) that couples gPC with probabilistic collocation. By using the sparse grid points, PCM can handle a random process with large number of random dimensions, with relatively lower computational cost, compared to full tensor products. Monte Carlo (MC) simulations have also been conducted to verify accuracy of the PCM. By comparing the MC and PCM results for mean and standard deviation of concentration, it is evident that the PCM approach is computational more efficient than Monte Carlo simulations. Unlike the conventional moment-equation approach, there is no limitation on the amplitude of random perturbation in PCM. Furthermore, PCM on sparse grids can efficiently simulate solute transport in randomly heterogeneous porous media with large variances.

54 ENVIRONMENTAL SCIENCES↗

Stochastic multiscale flux basis for Stokes-Darcy flows

Three algorithms are developed for uncertainty quantification in modeling coupled Stokes and Darcy flows. The porous media may consist of multiple regions with different properties. The permeability is modeled as a non-stationary stochastic variable, with its log represented as a sum of local Karhunen-Loève (KL) expansions. The problem is approximated by stochastic collocation on either tensor-product or sparse grids, coupled with a multiscale mortar mixed finite element method for the spatial discretization. A non-overlapping domain decomposition algorithm reduces the global problem to a coarse scale mortar interface problem, which is solved by an iterative solver, for each stochastic realization. In the traditional domain decomposition implementation, each subdomain solves a local Dirichlet or Neumann problem in every interface iteration. To reduce this cost, two additional algorithms based on deterministic or stochastic multiscale flux basis are introduced. The basis consists of the local flux (or velocity trace) responses from each mortar degree of freedom. It is computed for each subdomain independently before the interface iteration begins. The use of the multiscale flux basis avoids the need for subdomain solves on each iteration. The deterministic basis is computed at each stochastic collocation and used only at this realization. The stochastic basis is formed by further looping over all local realizations of a subdomain's KL region before the stochastic collocation begins. It is used over multiple realizations. Numerical tests are presented to illustrate the performance of the three algorithms, with the stochastic multiscale flux basis showing significant savings in computational cost compared to the other two algorithms.

97 MATHEMATICS AND COMPUTING↗

A communication-avoiding 3D algorithm for sparse LU factorization on heterogeneous systems

We propose a new algorithm to improve the strong scalability of right-looking sparse LU factorization on distributed memory systems. Our 3D algorithm for sparse LU uses a three-dimensional MPI process grid, exploits elimination tree parallelism, and trades off increased memory for reduced per-process communication. We also analyze the asymptotic improvements for planar graphs (e.g., those arising from 2D grid or mesh discretizations) and certain non-planar graphs (specifically for 3D grids and meshes). For a planar graph with $n$ vertices, our algorithm reduces communication volume asymptotically in $n$ by a factor of $\mathscr{O}$ $\Big(\sqrt{log \ n}\Big)$ and latency by a factor of $\mathscr{O}$ $(log \ n)$. For nonplanar cases, our algorithm can reduce the per-process communication volume by 3× and latency by $\mathscr{O}$ $\Big(n^\frac13\Big)$ times. In all cases, the memory needed to achieve these gains is a constant factor. We implemented our algorithm by extending the 2D data structure used in SuperLU_DIST. Our new 3D code achieves empirical speedups up to 27× for planar graphs and up to 3.3× for non-planar graphs over the baseline 2D SuperLU_DIST when run on 24,000 cores of a Cray XC30. We extend the 3D algorithm for heterogeneous architectures by adding the Highly Asynchronous Lazy Offload (Halo) algorithm for co-processor offload. On 4096 nodes of a Cray XK7 with 32,768 CPU cores and 4096 Nvidia K20x GPUs, the 3D algorithm achieves empirical speedups up to 24× for planar graphs and 3.5× for non-planar graphs over the baseline 2D SuperLU_DIST with co-processor acceleration.

97 MATHEMATICS AND COMPUTING↗

A PC-based bus monitor program for use with the transport systems research vehicle RS-232 communication interfaces

Experiment critical use of RS-232 data busses in the Transport Systems Research Vehicle (TSRV) operated by the Advanced Transport Operating Systems Program Office at the NASA Langley Research Center has recently increased. Each application utilizes a number of nonidentical computer and peripheral configurations and requires task specific software development. To aid these development tasks, an IBM PC-based RS-232 bus monitoring system was produced. It can simultaneously monitor two communication ports of a PC or clone, including the nonstandard bus expansion of the TSRV Grid laptop computers. Display occurs in a separate window for each port's input with binary display being selectable. A number of other features including binary log files, screen capture to files, and a full range of communication parameters are provided.

Easley, Wesley C.↗

Identification of topology changes in power grids using phasor measurements

Phasor measurement units (PMUs) are increasingly important for monitoring the state of an electrical power grid and quickly detecting topology changes caused by events such as lines going down or large loads being dropped. Phasors are complex‐valued measurements of voltage and current at various points of generation and consumption. If a line goes down or a load is removed, power flows change throughout the grid according to known physical laws, and the probability distribution of phasor measurements changes accordingly. This paper develops a method to estimate the current topology of a power grid from phasor measurements and considers the design goal of placing PMUs at strategic points in a distribution system to achieve good sensitivity to single‐line outages. From a vector of phasor measurements, probabilities are computed corresponding to the scenario that all power lines are operational and to alternate scenarios in which each line goes down individually. These probabilities are functions of the joint distributions of phasor measurements under each possible scenario, obtained through Monte Carlo simulations with random load profiles. We use log‐spline densities to estimate marginal distributions of phasor measurements and fold these into a multivariate Gaussian copula to capture important correlations. Sensitivity to outages varies according to which line goes down and where PMUs are placed on the grid. A greedy search algorithm is demonstrated for placing PMUs at locations that provide good sensitivity to single‐line outages. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

Wiel, Scott Vander↗

Quantum Simulation of the First-Quantized Pauli-Fierz Hamiltonian

We provide an explicit recursive divide-and-conquer approach for simulating quantum dynamics and derive a discrete first-quantized nonrelativistic QED Hamiltonian based on the many-particle Pauli-Fierz Hamiltonian. We apply this recursive divide-and-conquer algorithm to this Hamiltonian and compare it to a concrete simulation algorithm that uses qubitization. Our divide-and-conquer algorithm, using lowest-order Trotterization, scales for fixed grid spacing as O ~ ( Λ N 2 η 2 t 2 / ϵ ) for grid size N , η particles, simulation time t , field cutoff Λ , and error ϵ . Our qubitization algorithm scales as O ~ ( N ( η + N ) ( η + Λ 2 ) t log ( 1 / ϵ ) ) . This shows that even a naive partitioning and low-order splitting formula can yield, through our divide-and-conquer formalism, superior scaling to qubitization for large Λ . We compare the relative costs of these two algorithms on systems that are relevant for applications such as the spontaneous emission of photons and the photoionization of electrons. We observe that for different parameter regimes, one method can be favored over the other. Finally, we give new algorithmic and circuit-level techniques for gate optimization, including a new way of implementing a group of multicontrolled- X gates that can be used for better analysis of circuit cost. Published by the American Physical Society 2024

Mukhopadhyay, Priyanka (ORCID:0000000164639100)↗

An analysis of the bright white dwarf CD - 38 deg 10980

The bright DA white dwarf CD - 38 deg 10980 is comprehensively analyzed using all available data. Detailed comparisons of the overall energy distribution and Lyman-alpha and Balmer profiles are made with theoretical predictions based on a homogeneous grid of model atmospheres. These comparisons yield a consistent, well-defined effective temperature and surface gravity for this star of 24,700 + or - 250 K and log g = 7.95 + or - 0.15, respectively. A new gravitational redshift of 28.4 + or - 4.8 km/s is derived from an IUE high-dispersion spectrum. Conclusions regarding the mass and radius of CD - 38 deg 10980 are also presented.

Holberg, J. B.↗

Kepler Stellar Properties Catalog Update for Q1-Q17 DR25 Transit Search

Huber et al. (2014) presented revised stellar properties for 196,468 Kepler targets, which were used for the Q1-Q16 TPSDV planet search (Tenenbaum et al. 2014). The catalog was based on atmospheric properties (i.e., temperature (Teff), surface gravity (log(g)), and metallicity ([FeH])) published in the literature using a variety of methods (e.g., asteroseismology, spectroscopy, exoplanet transits, photometry), which were then homogeneously fitted to a grid of Dartmouth (DSEP) isochrones (Dotter et al. 2008). The catalog was updated in early 2015 for the Q1-Q17 Data Release (DR) 24 transit search (Seader et al. 2015) based on the latest classifications of Kepler targets in the literature at that time. The methodology followed Huber et al. (2014). Here we provide updated stellar properties of 197,096 Kepler targets. Like the previous catalog, this update is based on atmospheric properties that were either published in the literature or provided by the Kepler community follow-up program (CFOP). The input values again come from different methods: asteroseismology, spectroscopy, flicker, and photometry. This catalog update was developed to support the SOC 9.3 TPSDV planet search (Twicken et al. 2016), which is expected to be the final search and data release by the Kepler project.In this document, we describe the method and the inputs that were used to build the catalog. The methodology follows Huber et al. (2014) with a few improvements as described in Section 2.

DR25↗