Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Geometry meshing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Verification and Validation of COMSOL for Heat Transfer in Thin Rectangular Channels Using NACA Test Results

Currently efforts are underway at Oak Ridge National Lab (ORNL) to convert the High Flux Isotope Reactor (HFIR) from high enriched uranium to low enriched uranium fuel. In order to provide confidence to the thermal hydraulics calculations, computational fluid dynamics (CFD) simulations – simulated using COMOSOL – have been employed to calculate the pressure drop and heat transfer in the coolant. While CFD simulations provide well resolved results, turbulence models include a large amount of assumptions and must be validated for use in any safety-based analysis. In HFIR, long thin involute fuel plates are separated by coolant channels of equal size. The coolant channels are best described as thin rectangular channels. Unfortunately, there are few studies verifying and validating CFD for use in thin rectangular channels. This study seeks to bridge that gap by verifying, validating, and comparing various CFD models used in thin channels. To verify and validate CFD for use in thin channels, a series of simple analytic test cases are employed, and MMS is used to further verify the COMSOL tool and mesh geometry. For the validation, a series of tests conducted at NASA were simulated in COMSOL. The results of this study are three-fold. First, it verifies the ability of COMSOL to model heat transfer in thin channels. Second, it addresses the various aspects of CFD modeling that are of greatest concern for heat transfer simulations in the geometry. Third, and finally, it discusses the ability of various CFD models used in COMSOL to accurately predict heat transfer in narrow rectangular channels.

Howard, Trevor↗

Neutron production in the beryllium filter of a linac using 6 MeV treatment beam - 25425

In most conventional radiation therapy treatments, special attention is paid for neutron contamination when working with energy beams above 8 MeV. Generally, neutron generation it is only considered for shielding requirements, not for dose study in patients or employees. The present work is focused on studying the unwanted generated photoneutrons in a Medical Linear Accelerator (Linac) Varian TrueBeam using a 6 MeV radiation treatment beam. To that, Monte Carlo (MC) simulation code MCNP6.1.1 was used. This new version of the code allows the use of unstructured mesh geometries models, offering more geometric reliable results. The particularity of the studied Linac is the presence of a beryllium filter at the treatment head. Since Beryllium causes photonuclear reactions (γ, n) at energies much lower than other Linac composing materials, this work aims to analyze if this type of unit, when using low energy treatment beams (6 MeV), produce significant neutron dose and to ensure that this unwanted radiation can be considered negligible. (authors)

43 PARTICLE ACCELERATORS↗

MOCUM: A two-dimensional method of characteristics code based on unstructured meshing for general geometries

A transport theory code MOCUM based on the Method of Characteristics (MOC) as the flux solver with an advanced general geometry processor is developed for two-dimensional lattice and full core neutronics modeling. The core structure is represented by Constructive Solid Geometry (CSG) that uses Boolean operations to build complex geometries from simple polygons. Arbitrary-precision arithmetic is also used in the process of building CSG objects to eliminate the round-off error from the commonly used double precision numbers. Then, the constructed core frame will be decomposed and refined into a conforming Delaunay triangulation to ensure the quality of the meshes. The MOC solver kernel is fully paralleled using OpenMP and the developed numerical code is validated by several benchmarks representing various core geometries. For the cases modeled, the maximum percentage error for multiplication factor and the pin power compared to reference values are 0.1% and 0.7% respectively. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

EMPHASIS/Nevada UTDEM user guide. Version 2.0.

The Unstructured Time-Domain ElectroMagnetics (UTDEM) portion of the EMPHASIS suite solves Maxwell's equations using finite-element techniques on unstructured meshes. This document provides user-specific information to facilitate the use of the code for applications of interest. UTDEM is a general-purpose code for solving Maxwell's equations on arbitrary, unstructured tetrahedral meshes. The geometries and the meshes thereof are limited only by the patience of the user in meshing and by the available computing resources for the solution. UTDEM solves Maxwell's equations using finite-element method (FEM) techniques on tetrahedral elements using vector, edge-conforming basis functions. EMPHASIS/Nevada Unstructured Time-Domain ElectroMagnetic Particle-In-Cell (UTDEM PIC) is a superset of the capabilities found in UTDEM. It adds the capability to simulate systems in which the effects of free charge are important and need to be treated in a self-consistent manner. This is done by integrating the equations of motion for macroparticles (a macroparticle is an object that represents a large number of real physical particles, all with the same position and momentum) being accelerated by the electromagnetic forces upon the particle (Lorentz force). The motion of these particles results in a current, which is a source for the fields in Maxwell's equations.

99 GENERAL AND MISCELLANEOUS↗

HLPW-4/GMGW-3: High-Order Discretization Technology Focus Group Workshop Summary

This paper summarizes the High-Order Technical Focus Group (HO-TFG) submissions for the joint 4th AIAA High Lift Prediction (HLPW-4) and 3rd Geometry and Mesh Generation Workshop (GMGW-3). The goal of the workshop was to assess the state-of-the-art in mesh generation and computational fluid dynamics software. The Common Research Model High-Lift (CRM-HL) variant served as the primary focus of the workshop, and a two-dimensional airfoil section from the CRM-HL was used as a verification test case. Here, the HO-TFG was tasked with generating high-order curved meshes for both geometries, and computing high-order solutions using both Reynolds-averaged Navier–Stokes and scale-resolving formulations. While limited by computational resources, the final results demonstrate the potential of higher-order methods to increase solution accuracy with a lower degree-of-freedom count relative to second-order discretizations.

42 ENGINEERING↗

HLPW-4/GMGW-3: High Order Discretization Technology Focus Group Workshop Summary

This paper summarizes the High-Order Technical Focus Group (HO-TFG) submissions for the joint 4th AIAA High Lift Prediction and 3rd Geometry and Mesh Generation Workshop. The goal of the workshop was to assess the state-of-the-art in mesh generation and computational fluid dynamics software. The Common Research Model High-Lift (CRM-HL) variant served as the primary focus of the workshop, and a 2D airfoil section from the CRM-HL was used as a verification test case. The HO-TFG was tasked with generating high-order curved meshes for both geometries, and computing high-order solutions using both Reynolds Averaged Navier-Stokes and scale resolving formulations. While limited by computational resources, the final results demonstrate the potential of higher-order methods to increase solution accuracy with a lower degree of freedom count relative to second-order discretizations.

Galbraith, Marshall C.↗

Report on FY11 Extensions to MeshKit and RGG

One of the barriers to performing high-fidelity computational simulation of reactor core phenomena is the production of good-quality geometry and mesh models required by these simulations. Although a variety of geometry and meshing tools are available, they suffer from shortcomings in usability, robustness, or generality which makes them difficult to apply to reactor applications. The SHARP frameworks project is addressing these deficiencies by developing a library of mesh generation algorithms, and tools based on that library. The library is known as MeshKit, and one of the tools being developed is named RGG, for Reactor Geometry (and mesh) Generator. Over the past year, our meshing-related work was split between general design improvements in MeshKit, enhancing RGG to run in parallel, and the application of RGG to several specific reactor designs. These activities are described in this report.

97 MATHEMATICS AND COMPUTING↗

Big Ten MCNP6 Unstructured Mesh Benchmark

The purpose of this report is to document a benchmarking effort for the MCNP6 Unstructured Mesh (UM) geometry description method applied to a large and fairly complex critical assembly, Big Ten. A secondary goal of this effort is to provide a set of best practices for modeling a critical assembly with the MCNP UM method. Specification of geometry using UM requires creating a mesh from a solid geometry model and there are some important considerations when using this method for criticality problems. These considerations will be discussed along with suggested practices for correctly modeling these types of problems.

97 MATHEMATICS AND COMPUTING↗

Meshkit

MeshKit is an open-source library for mesh generation and related algorithms. MeshKit is designed both for users that perform mesh generation and for developers that develop meshing algorithm/application(s). MeshKit includes new meshing algorithms implemented first in this library, as well as interfaces to meshing algorithms/packages developed in DOE Labs and elsewhere. MeshKit uses a directed graph-based approach for organizing meshing problems that supports both traditional BREP-driven meshing as well as more general meshing processes and tools. One such tool is the Reactor Geometry (and mesh) Generator (RGG); RGG generates hexagonal and rectangular reactor geometries and meshes from text-based input in serial and parallel. It has been used to support a variety of reactor simulation codes and reactor types. Although primarily a library, MeshKit is also supporting a collaboration with Kitware to develop a graphical/GUI interface to the library.

Jain, Rajeev↗

Axom

The Axom library consists of n collection of software components that provide core computer science infrastructure capabilities that can be shared by diverse high performance computing (HPC) applications. The current set of capabilities that Axom provides includes: Customizable support for error/warning and diagnostic message reporting and coordination among components of integrated applications (e.g., physics packages, libraries, etc.); Scalable parallel aggregation and filtering of message logging; In memory datastore for hierarchical, mesh-aware simulation data. The datastore supports data description, allocation, deallocation. parallel l/0, etc; Mesh data model abstractions that enable the development of mesh-based computational algorithms that work with many diverse, application· specific mesh types; and Computational geometry primitives for developing high performance parallel algorithms based on spatial geometry and meshes, e.g., spatial acceleration data structures, sets, maps, relations, etc.

Hornung, RichardD.↗

Transparent, High‐Charge Capacity Metal Mesh Electrode for Reversible Metal Electrodeposition Dynamic Windows with Dark‐State Transmission <0.1%

Abstract Dynamic windows allow user control over light and heat flow to save energy and maximize comfort. Reversible metal electrodeposition (RME) dynamic windows can uniquely tint to a color‐neutral privacy state (0.1% visible light transmission). The design parameters of transparent metal mesh counter electrodes for high‐contrast RME dynamic windows: high transparency, charge capacity and surface area with low haze, sheet resistance and cost are discussed, concluding that woven metal meshes meet these design parameters. Electroplated current is measured on an indium tin oxide electrode and two meshes with different wire spacings, showing the meshes’ cylindrical geometry enable them to draw more current per square area. The mesh material composition is analyzed to ensure cycling durability in a CuBi electrolyte by developing a transparent mesh with an inert core (stainless steel, SS), a thin Au coating, and a high charge‐capacity (1.5 C cm −2 ) CuBi outer coating. The study demonstrates that the films maintain a consistent Cu:Bi ratio and optical properties after 250 privacy cycles or 1500 cycles to 10% transmission, showing that the Cu and Bi coating is effective in keeping the films from becoming Cu rich with cycling. Finally, a 100 cm 2 device with excellent uniformity and color neutrality is demonstrated.

Yeang, Andrew L.↗

Unconstrained plastering : all-hexahedral mesh generation via advancing front geometry decomposition (2004-2008).

The generation of all-hexahedral finite element meshes has been an area of ongoing research for the past two decades and remains an open problem. Unconstrained plastering is a new method for generating all-hexahedral finite element meshes on arbitrary volumetric geometries. Starting from an unmeshed volume boundary, unconstrained plastering generates the interior mesh topology without the constraints of a pre-defined boundary mesh. Using advancing fronts, unconstrained plastering forms partially defined hexahedral dual sheets by decomposing the geometry into simple shapes, each of which can be meshed with simple meshing primitives. By breaking from the tradition of previous advancing-front algorithms, which start from pre-meshed boundary surfaces, unconstrained plastering demonstrates that for the tested geometries, high quality, boundary aligned, orientation insensitive, all-hexahedral meshes can be generated automatically without pre-meshing the boundary. Examples are given for meshes from both solid mechanics and geotechnical applications.

97 MATHEMATICS AND COMPUTING↗