SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Functional and environmental testing of 6000 psig, 3/4-inch shutoff valve for venting high pressure gaseous hydrogen storage bottles
Navigational device, invented to aid recovery of spacecraft from any orbit, also illustrates motions of satellites relative to earth and their entry-ranging requirements. Device rapidly and accurately defines lateral range requirements for spacecraft returning to any desired site without manual or computerized calculation of orbital equations of motion.
Gas bubble in liquid under surface tension, weightlessness and rotation, determining angular velocity for fluid system disintegration
Three full size developmental batteries were tested with electric vehicles; two nickel-iron batteries and a lead-acid battery. Constant speed and driving schedule tests were done on a chassis dynamometer. Several aspects of battery performance were evaluated for capacity, recharge efficiency, voltage response, and self discharge. Each of these three batteries exhibited some strengths and some weaknesses.
Data on the concentration and composition of free tropospheric aerosol over the Pacific Ocean, collected during the GAMETAG program in 1977-1978 (Davis, 1980 and Patterson et al., 1980) are used to model values of aerosol optical extinction coefficients (sigma) at two wavelengths (0.55 and 1 micron) and values of volume backscatter coefficients (beta) at four wavelengths (1 micron, 9.11 microns, 9.25 microns, and 10.6 microns) and to investigate the relationship between these parameters. The mass concentrations inferred from the GAMETAG measurements with optical particle spectrometers agreed with the results of simultaneous chemical measurements. The study of the relationships among the optical parameters indicates that visible and near-visible values of beta and sigma may be useful in predicting 9.11- and 10.6-micron backscatter.
The paper presents an airborne backscatter lidar developed to fly multiple times on the NASA DC-8 research aircraft and measure vertical profiles of aerosol and cloud backscatter throughout the vertical extent of the troposphere, with emphasis on coverage of the range of latitudes. The lidar instrument characteristics are summarized and the calibration procedures are described. Results of aerosol and cloud observations are presented.
Shortwave radiative fluxes which reach the Earth's surface are key elements that influence both atmospheric and oceanic circulation as well as crop growth. The World Climate Research Program has established the Surface Radiation Budget Climatology Project with the ultimate goal of determining the various components of the surface radiation budget from satellite data on a global scale. This report describes the first global product that is being produced and archived as part of that effort. Product content and accuracy are reviewed, and example data from several regions are presented.
Global distributions of surface and atmospheric cloud radiative forcing parameters have been derived using parameterized radiation models with satellite meteorological data from the International Satellite Cloud Climatology Project, and directly measured top-of-atmosphere radiative fluxes from the Earth Radiation Budget Experiment. Specifically, shortwave, longwave, and total cloud forcing at the surface, and column-averaged values of longwave cloud forcing of the atmosphere were derived for the midseasonal months of April, July, and October 1985 and January 1986, covering a complete annual cycle. Seasonal variability is illustrated by comparing the results for July 1985 and January 1986, which represent the seasonal extremes. Surface shortwave cloud forcing is always negative, representing a cooling of the surface, with strongest cooling (-120 to -180 W/sq m) occurring over midlatitude storm tracks of the summer hemisphere. Surface longwave cloud forcing is always positive, representing a warming of the surface, with strongest warming (60 to 75 W/sq m) occurring over storm tracks of the winter hemisphere. Zonal averages show the entire summer hemisphere dominated by shortwave cooling, the middle and high latitudes of the winter hemisphere dominated by longwave warming, and a broad zone of transition in between. The globally averaged total cloud forcing amounts to a cooling throughout the year, ranging from a low of about -12 W/sq m for July 1985 to a high of about -25 W/sq m for January 1986. The longwave cloud forcing of the atmosphere shows a strong warming over deep convective regions in the tropics and a moderate cooling outside the tropics, amounting to a weak cooling (-2 to -5 W/sq m) in the global average. Comparisons of the results with general circulation model simulations show broad qualitative agreement regarding the locations of prominent warming and cooling regions. Quantitative comparisons, on the other hand, show significant differences between the magnitudes of warming and cooling in these regions. Most of the larger differences can be attributed to known deficiences of the general circulation model simulations. Comparisons with satellite-derived results of other investigators show much better agreement.
A generalized (pseudo) inverse technique was developed to facilitate a better understanding of the numerical effects of tropical singularities inherent in the spectral linear balance equation (LBE). Depending upon the truncation, various levels of determinancy are manifest. The traditional fully-determined (FD) systems give rise to a strong response, while the under-determined (UD) systems yield a weak response to the tropical singularities. The over-determined (OD) systems result in a modest response and a large residual in the tropics. The FD and OD systems can be alternatively solved by the iterative method. Differences in the solutions of an UD system exist between the inverse technique and the iterative method owing to the non- uniqueness of the problem. A realistic balanced wind was obtained by solving the principal components of the spectral LBE in terms of vorticity in an intermediate resolution. Improved solutions were achieved by including the singular-component solutions which best fit the observed wind data.
A generalized inverse technique is applied to retrieve two types of balanced winds that characterize the large-scale dynamics of the atmosphere: rotational winds based upon the linear balance equation, and divergent winds based upon the vorticity budget equation. Both balance equations are singular at or near the equator. The balance equations are transformed in spherical harmonic function space to an under-determined system, for which the scale-weighed least-squares solution consists of a sum of principal and singular components. The principal components represent the response to the source function for the regular eigenmodes, while the singular components are determined by the projection of an independent measurement on the singular eigenmodes. The method was tested with the NCEP/NCAR reanalysis data in which a quasi-balance condition exists. A realistic balanced wind field is retrievable when the singular components are computed based upon the reanalyzed wind data.
The majority of our work, therefore, centered on experiments at an extended exposure period at low ozone concentrations, creating and programming the necessary calibration curve into a Zikua reader. and verifying that the Zikua would use the curve reliably. Zikua is a device supplied by Vistanomics to 'read' the exposed EcoBadge cards and provide a read-out of measured ozone concentration in ppb. This device replaces the visual comparison to a calibrated color chart. For our initial studies, test papers were prepared by the usual method in small batches. Although testing would also eventually include Vistanomics' EcoBadge papers, we began with papers prepared in our lab so that we could be assured of the freshness of each batch. We felt this would allow us better comparison among our runs as we varied exposure time. At the outset, our target acceptable error was about +/- 10%. For example, if the actual ozone concentration was 20 ppb, then we hoped to be in the range 18-22 ppb. If the actual ozone concentration was 100 ppb. then we hoped to fall within 90-110 ppb in our measurements. Clearly a systematic error in the range of 3-4 ppb or more would significantly affect the lower exposure data.
The Moon Mineralogy Mapper (M3), a NASA Discovery Mission of Opportunity, was launched October 22, 2008 from Shriharikota in India on board the Indian ISRO Chandrayaan- 1 spacecraft for a nominal two-year mission in a 100-km polar lunar orbit. M3 is a high-fidelity imaging spectrometer with 260 spectral bands in Target Mode and 85 spectral bands in a reduced-resolution Global Mode. Target Mode pixel sizes are nominally 70 meters and Global pixels (binned 2 by 2) are 140 meters, from the planned 100-km orbit. The mission was cut short, just before halfway, in August, 2009 when the spacecraft ceased operations. Despite the abbreviated mission and numerous technical and scientific challenges during the flight, M3 was able to cover more than 95% of the Moon in Global Mode. These data, presented and analyzed here as a global whole, are revolutionizing our understanding of the Moon. Already, numerous discoveries relating to volatiles and unexpected mineralogy have been published [1], [2], [3]. The rich spectral and spatial information content of the M3 data indicates that many more discoveries and an improved understanding of the mineralogy, geology, photometry, thermal regime and volatile status of our nearest neighbor are forthcoming from these data. Sadly, only minimal high-resolution Target Mode images were acquired, as these were to be the focus of the second half of the mission. This abstract gives the reader a global overview of all the M3 data that were collected and an introduction to their rich spectral character and complexity. We employ a Principal Components statistical method to assess the underlying dimensionality of the Moon as a whole, as seen by M3, and to identify numerous areas that are low-probability targets and thus of potential interest to selenologists.
The DEVELOP National Program was established over a decade ago to provide students with experience in the practical application of NASA Earth science research results. As part of NASA's Applied Sciences Program, DEVELOP focuses on bridging the gap between NASA technology and the public through projects that innovatively use NASA Earth science resources to address environmental issues. Cultivating a diverse and dynamic group of students and young professionals, the program conducts applied science research projects during three terms each year (spring, summer, and fall) that focus on topics ranging from water resource management to natural disasters.
No abstract available
Explore the source record for details and available documents.
We use a machine learning algorithm combining information from the NASA GEOS composition forecast (GEOS-CF) model and surface observations of nitrogen dioxide (NO2) and ozone (O3) at more than 5,000 observation sites to assess the impact of COVID-19 restrictions on surface air quality in 46 countries. Our methodology removes the compounding impacts of meteorology, seasonality and atmospheric chemistry on air pollution, thus allowing for a quantitative estimate of the change in surface air quality following COVID-19 containment measures. Compared to GEOS-CF model predictions that do not include emission reductions related to COVID-19 restrictions, surface observations show a drop in surface NO2 of up to 60% after the implementation of lockdowns. Average NO2 concentrations between February 2020 to June 2020 were 18% lower than business as usual. The earliest and strongest declines are observed over China, followed by Europe and the US. While NO2 concentrations over China recovered within 2 months, the recovery has been slower over Europe and the US. The impact of COVID-19 restrictions on O3 is complicated by non-linear atmospheric chemistry. Locally, O3 can show a short-term increase of up to 50% as a result of the decrease in NO2, which leads to a reduction in night time titration. However, this effect is offset by a decrease in photochemical production during the day. Our results indicate that these two competing processes resulted in a net zero change in average surface ozone during the first 5 months of the pandemic. The results also indicate that the reduced photochemical production becomes increasingly important over time. Our analysis is based on surface observations and model simulations available in near real-time, and we will present an up-to-date view of the short and medium-term impacts of COVID-19 restrictions on air quality around the world.