Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fuel additive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Bio-derived sustainable aviation fuels—On the verge of powering our future

Jet fuels derived from biomass (bio-derived sustainable aviation fuels or BSAFs) offer a means of reducing net carbon emissions from aviation. Drop-in substitute fuels are attractive for use with existing and near-future aviation fleets and fueling infrastructure. Yet fuels derived from different biomass feedstock and produced by different production pathways have different fuel properties. These fuel property differences—especially ignition properties—offer challenges. This chapter discusses the current status, challenges, and opportunities of BSAFs. Strategies for closer property matching and for modeling and dealing with varied and uncontrolled properties are highlighted.

ASTM jet fuel certification↗
DOE OSTI2023

A wide range experimental and kinetic modeling study of the oxidation of 2,3-dimethyl-2-butene: Part 1

2,3-Dimethyl-2-butene (TME) is a potential fuel additive with high research octane number (RON) and octane sensitivity (S), which can improve internal combustion engine performance and efficiency. However, the combustion characteristics of TME have not been comprehensively investigated. Thus, it is essential to study the combustion characteristics of TME and construct a detailed chemical kinetic model to describe its combustion. In this paper, two high-pressure shock tubes and a constant-volume reactor are used to measure ignition delay times and laminar flame speeds of TME oxidation. Further, the ignition delay times were measured at equivalence ratios of 0.5, 1.0, and 2.0 in “air”, at pressures of 5 and 10 bar, in the temperature range of 950 – 1500 K. Flame speeds of the TME/ “air” mixtures were measured at atmospheric pressure, at a temperature of 325 K, for equivalence ratios ranging from 0.78 to 1.31. Two detailed kinetic mechanisms were constructed independently using different methodologies; the KAUST TME mechanism was constructed based on NUIGMech1.1, and the MIT TME mechanism was built using the Reaction Mechanism Generator (RMG). Both mechanisms were used to simulate the experimental results using Chemkin Pro. In the present work, reaction flux and sensitivity analyses were performed using the KAUST mechanism to determine the critical reactions controlling TME oxidation at the conditions studied.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Metal-supported solid oxide fuel cells operating with reformed natural gas and sulfur

The performance, long-term durability, and thermal cycling tolerance of metal supported solid oxide fuel cells (MS-SOFCs) operating with natural gas reformate fuels is assessed. Symmetric MS-SOFCs with composite SDC-Ni anode catalysts and PrO x cathode catalysts are operated with simulated natural gas steam-reformate and partial-oxidation-reformate fuels with 1 ppm and 5 ppm of sulfur. Cells are operated for 1000 h with initial degradation rates similar to humidified H 2 , and initial performance differences attributed to the lower H 2 concentration in reformate fuels. Additionally, cells tolerate many aggressive thermal cycles with sulfur present, with minimal impact on performance. Post mortem analysis suggests that Ni particle coarsening and Cr deposition are sources of degradation, while carbon and sulfur deposition are not observed. Overall, MS-SOFCs operate successfully with reformed natural gas.

08 HYDROGEN↗
DOE OSTI2026

Combustion-assisted ink-jet printing of nuclear targets

Advances in target fabrication are critical to high-precision measurements in nuclear physics. This work details the preparation of patterned CeO 2 and ThO 2 architectures and thin-film targets via ink-jet deposition of combustible solutions. The produced targets were characterized by scanning electron microscopy (SEM), and by alpha-particle spectroscopy for radioactive targets to determine densities. Ink jet printing of the targets, used both ethanol and 2-methoxyethanol as solvents, with cerium or thorium nitrate as the oxidizer and acetylacetone as the fuel. Additionally, we found that the distance between each droplet dispersion (step size) played the most significant role in determining the final pattern uniformity and thickness. A 50 μm step size leads to relatively thick targets with a density of 350 μg/cm 2 . Significant overlap in droplet sizes leads to a heterogeneous target with an undesirable cracked surface structure. In contrast, 150 μm spacing yields thinner (20 μg/cm 2 ) patterned structures with excellent surface coverage. This method of Ink-jet printing provides a straightforward, scalable, and high-efficiency pathway to prepare custom made, high-quality targets for nuclear physics experiments.

CeO2↗
DOE OSTI2020

Soot formation and growth with palladium acetylacetonate-toluene injection in ethylene base flames investigated by in situ synchrotron small-angle X-ray scattering

Organo-Pd compounds as fuel additives are proven to have distinct catalytic effects on enhancing ignition and combustion performance. However, their effects on soot emission and the mechanism are not well-established. In this study, the effect of palladium acetylacetonate (Pd(C 5 H 7 O 2 ) 2 , Pd(acac) 2 ) on soot formation and growth was investigated experimentally. Different concentrations of Pd(acac)2 were added in the ethylene flames. Synchrotron small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) were used to detect the soot particles to obtain the size, shape and morphology information. The results show that the Pd(acac) 2 addition with low concentration (100 ppm) suppresses the formation and growth of the primary soot particles at each height above the burner. As the addition concentration increases to 200 and 300 ppm, the size and volume fraction of the soot particles are decreased at the low flame region, and increased at the high flame region. Furthermore, detailed size distribution, morphology and nanostructure information of the soot particles at different flame heights are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Boosting the performance of reversible solid oxide electrochemical cells with a novel hybrid oxygen electrode, Pr 1.39 Ba 0.14 Sr 0.53 Co 1.48 Fe 0.76 O 6- δ -Ba 0.66 Sr 0.34 CoO 3- δ

Solid oxide electrochemical cells (SOECs) stand out as a highly promising clean energy technology that offers several benefits, showing significant potential to play a pivotal role in the transition towards a sustainable and low-carbon energy future. SOECs can efficiently convert the chemical energy stored in fuels to electricity in fuel cell mode, and produce various chemicals from abundant feedstocks (e.g., CO 2 , H 2 O) and intermittent solar/wind-based renewable electricity. Despite extensive efforts that have been devoted to designing novel materials and optimizing SOEC manufacturing processes, aiming to achieve enhanced energy efficiency, the current SOECs still suffer from poor performance, which is mainly due to the sluggish oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) kinetics. To address this challenge, in this work, we have successfully designed an in situ formed hybrid oxygen electrode material (Pr 1.39 Ba 0.14 Sr 0.53 Co 1.48 Fe 0.76 O 6- δ -Ba 0.66 Sr 0.34 CoO 3- δ ), which significantly improves the surface oxygen exchange coefficient and bulk oxygen-ion diffusion coefficient, enhancing the OER and ORR electrocatalytic activities. Further, the SOECs equipped with this newly developed oxygen electrode achieved exceptional performance for power generation using both hydrogen and propane as the fuels. At 750 °C, a peak power density of 2.4 W cm -2 was obtained with H 2 as the fuel. Additionally, the SOECs attain unprecedented performance in steam electrolysis mode. A current density of 4.4 A cm -2 was achieved at 1.3 V and 750 °C, which represents the highest performance among all yttria-stabilized zirconia (YSZ) electrolyte-based SOECs. The SOECs also deliver remarkable stability during the accelerated stability testing, highlighting the great potential of Pr 1.39 Ba 0.14 Sr 0.53 Co 1.48 Fe 0.76 O 6- δ -Ba 0.66 Sr 0.34 CoO 3- δ as a high-performance oxygen electrode for next generation SOECs.

08 HYDROGEN↗
DOE OSTI2021

CRISPR-mediated multigene integration enables Shikimate pathway refactoring for enhanced 2-phenylethanol biosynthesis in Kluyveromyces marxianus

Background: 2-phenylethanol (2-PE) is a rose-scented flavor and fragrance compound that is used in food, beverages, and personal care products. Compatibility with gasoline also makes it a potential biofuel or fuel additive. A biochemical process converting glucose or other fermentable sugars to 2-PE can potentially provide a more sustainable and economical production route than current methods that use chemical synthesis and/or isolation from plant material. Results: We work toward this goal by engineering the Shikimate and Ehrlich pathways in the stress-tolerant yeast Kluyveromyces marxianus. First, we develop a multigene integration tool that uses CRISPR-Cas9 induced breaks on the genome as a selection for the one-step integration of an insert that encodes one, two, or three gene expression cassettes. Integration of a 5-kbp insert containing three overexpression cassettes successfully occurs with an efficiency of 51 ± 9% at the ABZ1 locus and was used to create a library of K. marxianus CBS 6556 strains with refactored Shikimate pathway genes. The 3 3 -factorial library includes all combinations of KmARO4, KmARO7, and KmPHA2, each driven by three different promoters that span a wide expression range. Analysis of the refactored pathway library reveals that high expression of the tyrosine-deregulated KmARO4 K221L and native KmPHA2, with the medium expression of feedback insensitive KmARO7 G141S , results in the highest increase in 2-PE biosynthesis, producing 684 ± 73 mg/L. Ehrlich pathway engineering by overexpression of KmARO10 and disruption of KmEAT1 further increases 2-PE production to 766 ± 6 mg/L. The best strain achieves 1943 ± 63 mg/L 2-PE after 120 h fed-batch operation in shake flask cultures. Conclusions: The CRISPR-mediated multigene integration system expands the genome-editing toolset for K. marxianus, a promising multi-stress tolerant host for the biosynthesis of 2-PE and other aromatic compounds derived from the Shikimate pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Combustion of Butyl acetate as an alternative additive to petroleum fuels

Blending petroleum fuels with oxygenates is a common approach to stem the depletion of crude oil while also mitigating the impact of their combustion on the environment. It has recently been considered that butyl acetate (BA, C6H12O2 , boiling point of 399K) could be a viable oxygenate additive to diesel fuel. The platform used to study combustion of commercial and synthesized BA was an isolated droplet burning with spherical symmetry. The experiments were carried out in a drop tower to minimize buoyant convection. Restricting motion by supporting droplets on 14 micrometer fibers eliminated forced convection. Precise control of the initial diameter was achieved by first deploying large droplets and letting them evaporate to the size of interest, here being between 0.3 mm to 0.8 mm. The experimental results show that commercial and the newly synthesized BA burned almost identically for the evolution of droplet and flame diameters. Droplets burned slower as the initial diameter was increased and soot formation was noted for the larger sizes studied due to a residence size effect. Burning in a buoyant convective field showed higher burn rates due to the convective effect and that the asymmetric flames became nearly spherical as diameter decreased. The study illustrates the significant value that the microgravity environment brings to evaluating performance of oxygenated fuels synthesized by new production methods.

Wang, Yujie↗
DOE OSTI2022

3D printing of additive structures for nuclear fuels

A method for manufacturing a nuclear fuel compact is provided. The method includes forming an additive structure, consolidating a fuel matrix around the additive structure, and thermally processing the fuel matrix to form a fuel compact in which the additive structure is encapsulated therein. The additive structure optionally includes a vertical segment and a plurality of arm segments that extend generally radially from the vertical segment for conducting heat outwardly toward an exterior of the fuel compact. In addition to improving heat transfer, the additive structure may function as burnable absorbers, and may provide fission product trapping.

Terrani, Kurt A.↗
DOE OSTI2023

3D printing of additive structures for nuclear fuels

A method for manufacturing a nuclear fuel compact is provided. The method includes forming an additive structure, consolidating a fuel matrix around the additive structure, and thermally processing the fuel matrix to form a fuel compact in which the additive structure is encapsulated therein. The additive structure optionally includes a vertical segment and a plurality of arm segments that extend generally radially from the vertical segment for conducting heat outwardly toward an exterior of the fuel compact. In addition to improving heat transfer, the additive structure may function as burnable absorbers, and may provide fission product trapping.

Terrani, Kurt A.↗
DOE OSTI2022

Durability Study of a High-Pressure Common Rail Fuel Injection System Using Lubricity Additive-Dosed Gasoline-Like Fuel—Improved Endurance with Upgraded Hardware

Gasoline compression ignition (GCI) is a promising combustion technology that can help the commercial transportation sector achieve operational flexibility and meet upcoming criteria pollutant regulations. However, high-pressure fuel injection systems (>1000 bar) are needed to enable GCI and fully realize its benefits compared to conventional diesel combustion. This work is a continuation of previous durability studies that identified three key technical risks after running gasoline-like fuel through a heavy-duty, common rail injection system: (i) cavitation damage to the inlet check valve of the high-pressure pump, (ii) loss of injector fueling capacity, (iii) cavitation erosion of the injector nozzle holes. Upgraded hardware solutions were tested on a consistent 400- to 800-hour NATO durability cycle with the same gasoline-like fuel as previous studies. The upgraded pump showed no signs of abnormal wear or cavitation damage to the inlet check valve. In contrast to previous studies, there were no signs of pump performance degradation observed after 400 hours of testing. Material selection and design upgrades were also made to the injector which, only showed a 6.5% loss in fueling capacity after 800 hours of durability testing compared to 49.3% previously. Finally, geometric nozzle hole features such as higher inlet radius of curvature and higher K-factor were found to correlate with reduced cavitation erosion. However, mitigation of eccentric radial needle motion (i.e., wobble) is likely needed to further suppress cavitation. In general, the results from this study indicate there are viable hardware-based solutions for improving the endurance of high-pressure systems when running with gasoline-like fuel.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Methods of forming structures and fissile fuel materials by additive manufacturing

A method of forming one or more structures by additive manufacturing comprises introducing a first layer of a powder mixture comprising graphite and a fuel on a surface of a substrate. The first layer is at least partially compacted and then exposed to laser radiation to form a first layer of material comprising the fuel dispersed within a graphite matrix material. At least a second layer of the powder mixture is provided over the first layer of material and exposed to laser radiation to form inter-granular bonds between the second layer and the first layer. Related structures and methods of forming one or more structures are also disclosed.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Microstructurally validated stable and predictable swelling in low-enriched uranium monolithic U-10Mo fuel mini-plates

Qualification of the low-enriched uranium (LEU) monolithic U-10 wt%Mo (U-10Mo) plate-type fuel system requires a demonstration of a stable and predictable fuel swelling behavior over the anticipated operating conditions of the United States high-performance research reactors (USHPRRs) selected for conversion to LEU operation. This will allow each reactor to develop appropriate safety margins that will retain fuel element lifetime coolability. Additionally, the fuel system must maintain performance attributes when fabricated at a commercial scale. The Mini-plate 1 experiment represents the first irradiation test of commercially fabricated miniaturized monolithic LEU U-10Mo fuel plates. Here, the swelling behavior within this experiment was compared against that of historical fuel developmental tests to reveal that the commercially fabricated fuel performed within the current recommended U-10Mo swelling model's predictions. Additionally, the fuel microstructural evolution was evaluated to link initial conditions to subtle variations detected in the swelling response, providing validation and confidence that the fuel system is robust.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Elucidating the effect of minor-actinide addition on fuel-cladding chemical interaction in an HT-9 clad U-Pu-Zr metallic fuel irradiated to 6.15 at.% burnup in EBR-II

Scanning and transmission electron microscopy (S/TEM) were used to characterize the local fuel-cladding chemical interaction (FCCI) in one cross-section taken from a HT-9 clad U-20.3Pu-10Zr-1.2Am-1.3Np (in wt.%) fuel irradiated to 6.15 at.% burnup with inner cladding temperatures ranging between 460–490 °C. Results showed that the total interaction thickness between fuel and cladding was <10 µm. Fe infiltrated the fuel to form U-Zr-Fe phases while fuel elements or lanthanides did not infiltrate into the cladding. Np was not involved in the formation of any phases in the examined locations; however, Am played a role by forming a ∼2 µm thick homogeneous Fe-Pu-Am planar front at the inner cladding wall. An oxidized Na layer existed in the fuel-cladding gap with Fe and lanthanide particles dispersed within, suggesting Na could facilitate the transport of fuel and cladding constituents. Secondary phases, including an FCC Zr-rich phase, lanthanide phases, and α’-Cr(Fe) were identified in the outer fuel and FCCI regions. Furthermore, this study suggests that, for the irradiation conditions specific to this cross-section, minor actinides have little impact on FCCI behavior beyond what would be observed in typical HT-9 clad U-Pu-Zr fuel pins systems.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Investigation of Membrane Chemical Degradation as a Function of Catalyst Platinum Loading

Membrane chemical degradation is one of many factors that can impact fuel cell durability. Additionally, the fuel cell’s lifetime heavily depends on the membrane and its ability to maintain chemical and mechanical integrity. Previous studies indicate that chemical degradation is due to the formation of hydroxyl radicals that attack the polymer structure resulting in membrane thinning, pinhole formation, and the release of fluoride and sulfate ions. Membrane durability was investigated using ultra-low Pt electrode loadings (≤ 0.1 mg Pt cm -2 ). Accelerated stress testing (US-DOE protocols) demonstrated that the degradation rate was found to increase with higher Pt loadings. This is most likely due to more heterogeneous sites for radical formation due to hydrogen crossover to the cathode. We also explored membrane degradation rates while varying catalyst layer thickness, ionomer to carbon ratio, and types of carbon support. All of the aforementioned variables impact the membrane degradation rates.

25 ENERGY STORAGE↗