Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Feedstock Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Techno-Economic Case Study: Low-Temperature Conversion Performance Based on Isolated Anatomical Fractions of Corn Stover

This report summarizes analysis conducted to support a case study under the Feedstock Conversion Interface Consortium (FCIC) focused on techno-economic analysis (TEA) modeling to quantify the process yield and resulting process cost impacts for processing isolated anatomical fractions of corn stover through a low-temperature conversion (biochemical) pathway. It is hypothesized that different individual anatomical fractions of corn stover vary in both composition and recalcitrance, giving biorefineries options in whether and how to deal with fractionated or whole biomass feedstock. By quantifying the techno-economic impacts of this variability, we provide actionable information for end users to understand tradeoffs in conversion system yields and economics in considering feedstock processing decisions at the biorefinery gate. For this study, we worked with FCIC researchers to obtain data on the compositional analysis and conversion performance of whole corn stover alongside three individual anatomical fractions (cobs, husks, and stalks) across key steps of the biorefinery conversion process within FCIC’s research scope—pretreatment and enzymatic hydrolysis. This TEA screening assessment highlighted biorefinery economic trade-offs observed through this approach. Namely, relative to processing whole stover biomass, two of the three anatomical fractions for which composition/conversion data were available (cobs and husks) demonstrated the ability to achieve higher fuel yields and lower minimum fuel selling prices (MFSPs), while the third fraction (stalks) led to the opposite result, as a composite reflection of compositional differences and process convertibility.

cost impacts↗
DOE OSTI2026

Systematic analysis of melt pool dynamics in laser processing of mixed powder feedstocks

Functionally graded materials (FGMs) fabricated via additive manufacturing of blended powders offer the potential to spatially tailor properties for new technologies, such as fusion first-wall systems, turbine blades, and spacecraft. However, processing these materials is difficult due to the multiplicity of processing parameters to optimize, all of which must be changed as substrate material, powder feedstock compositions, and melt pool dynamics evolve. Here, this work systematically evaluates the qualitative and quantitative effects of these variables on the melt pool size, shape, composition, and particle distribution in an exemplar Ti-Ta system, and connects the experimental results to Marangoni flow behavior and phenomena observed in other systems. Increasing laser power linearly increases melt pool size and layer thickness, driving engineering considerations such as part/geometrical tolerances. Decreasing laser velocity changes the melt pool shape from lenticular to convex and reduces chemical homogeneity due to extreme thermal and compositional gradients between the melt pool center and boundaries. Thermophysical property differences between the powder feedstock and substrate material, as well as the directionality of the gradient, affect dilution and melt pool dynamics, which in turn affect the melt pool boundary characteristics, shape, and uniformity. Mixed powder feedstocks of intermediate compositions do not behave according to linear interpolations between single-material endpoints, instead building taller and wider melt pools. As such, it is recommended to quantify process maps for at least one intermediate composition in the FGM or multi-material system of interest to ensure optimized processing parameters, predictable melt pool sizes and shapes, and compositional and spatial precision.

Dissimilar↗
DOE OSTI2022

Spectroscopic analysis reveals that soil phosphorus availability and plant allocation strategies impact feedstock quality of nutrient-limited switchgrass

Abstract The perennial native switchgrass adapts better than other plant species do to marginal soils with low plant-available nutrients, including those with low phosphorus (P) content. Switchgrass roots and their associated microorganisms can alter the pools of available P throughout the whole soil profile making predictions of P availability in situ challenging. Plant P homeostasis makes monitoring of P limitation via measurements of plant P content alone difficult to interpret. To address these challenges, we developed a machine-learning model trained with high accuracy using the leaf tissue chemical profile, rather than P content. By applying this learned model in field trials across two sites with contrasting extractable soil P, we observed that actual plant available P in soil was more similar than expected, suggesting that adaptations occurred to alleviate the apparent P constraint. These adaptations come at a metabolic cost to the plant that have consequences for feedstock chemical components and quality. We observed that other biochemical signatures of P limitation, such as decreased cellulose-to-lignin ratios, were apparent, indicating re-allocation of carbon resources may have contributed to increased P acquisition. Plant P allocation strategies also differed across sites, and these differences were correlated with the subsequent year’s biomass yields.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Data for 3-Hydroxypropionic Acid Recovery from Fermentation Broth through Novel Downstream Processing: Technoeconomic Analysis

This study develops and validates a simplified, fully solvent-free downstream processing (DSP) strategy for high-purity recovery of 3-hydroxypropionic acid (3-HP) from real fermentation broth containing 62.3 g/L of 3-HP. Optimized activated carbon treatment achieved 98% color removal, while Amberlite IRA-67 was operated at pH 4.5 and 30 °C to minimize product loss. This is the first integrated demonstration of a fully solvent-free DSP enabling recovery of bio-based 3-HP as both a solid sodium salt and a concentrated aqueous solution, supported by techno-economic analysis. At lab scale, the process achieved 77.3% recovery of sodium 3-HP with 83.2% (w/w) purity and produced a 30% (w/v) aqueous solution. Techno-economic analysis yielded minimum selling prices of $0.551/kg for the solution and $0.892/kg for the salt, both below target thresholds for cost-competitive bio-acrylic acid production. Overall, these results demonstrate an efficient, scalable, and economically viable industrial pathway for 3-HP recovery.

Bioproducts↗
DOE OSTI2023

Organic Waste Resource Assessment for the Detroit Region

This study summarizes major sources of organic wastes in the Detroit region to (1) characterize target feedstock magnitudes and distribution in support of techno-economic analysis (TEA), and (2) guide the design of blended feedstock conversion experiments using hydrothermal liquefaction (HTL). Feedstocks considered in this review include municipal wastewater sludge solids (untreated) and scum; bulk municipal solid waste (MSW); the organic fraction of municipal solid waste (OF-MSW); residential food waste, non-residential food waste including institutional, industrial, and commercial (IIC) sources; confined animal manures (i.e., lactating dairy, feedlot beef, and market swine); waste fats, oils and greases (FOG); agricultural residues; forest residues. The scope of the investigation was limited to existing modeled or publicly available reporting datasets. Bulk MSW data were only collected for context and to generate estimates of OF-MSW by waste type and should not be included in total organic waste estimates. Because the TEA analysis boundary was not defined prior to conducting the resource assessment, the data are summarized within six spatial contexts (boundaries), including (1) city of Detroit (census); (2) Great Lakes Water Authority (GLWA) service area; “Tri-county” urban area (census); “Metro” Detroit-Warren-Dearborn Metropolitan Statistical Area (MSA) (census); Detroit-Warren-Ann Arbor Combined Statistical Area (CSA) (census); and the Michigan Councils of Government (COG) Region-1. All of the spatial contexts are entirely within the State of Michigan, and some overlap one another. A broader context could be developed to include data from surrounding states or Canada.

09 BIOMASS FUELS↗
DOE OSTI2021

Predicting Catalytic Pyrolysis Aromatic Selectivity from Pyrolysis Vapor Composition Using Mass Spectra Coupled with Statistical Analysis

The behavior of fast pyrolysis (FP) and catalytic FP (CFP) of 20 renewable feedstocks was studied in a microscale reactor with molecular beam mass spectral analysis of products generated. A partial least-squares (PLS) model was constructed based on the FP vapor spectra that predicts the aromatic selectivity when upgrading over a ZSM-5 catalyst. Additionally, principal component analysis of both FP and CFP spectra was performed for comprehensive spectral analysis. This work highlighted the value of vapor-phase mass spectral screening to predict the subsequent feedstock performance and demonstrated that the quantity of coke deposited on the catalyst is not a reliable measure of catalyst deactivation when the feedstock type is varied.

09 BIOMASS FUELS↗
DOE OSTI2025

Predicting Selective Laser Printing Print Quality of Polymer Powders through Melt Flow Index

Selective Laser Sintering (SLS) uses a precisely controlled laser to fuse polymer powder to build complex 3D shapes. While SLS covers a wide application space, the processing knowledge of polymer powder is limited, restricting the number of commercial powders available. This study serves to expand the processing knowledge of polypropylene and polyethylene in parallel with a “mature” SLS feedstock, nylon, through melt flow index (MFI) characterization. Differential Scanning Calorimetry (DSC) was used to explore the sintering window of the polymers. Polyethylene and polypropylene exhibited a relatively narrow sintering window between 4 – 5 °C, whereas the sintering window of nylon was much wider, between 23 – 24 °C. This suggests that the print quality between polyethylene and polypropylene would be similar; however, X-ray computed tomography revealed a higher volume of print defects, voids, and de lamination in polyethylene than in polypropylene. MFI analysis provided additional insight into the difference in print quality, as the MFI of polyethylene was 7.16 g/10 min, 9.95 g/10 min for polypropylene, and 17.23 g/10 min for nylon. MFI is inversely correlated to melt viscosity, and a low melt viscosity is desired for proper coalescing between the layers and particles. These results suggest that MFI is a promising tool, in conjunction with traditional thermal analysis, for screening candidate powder feedstocks for SLS and optimization of print parameters for novel powders.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Simulation of Mechanical Fractionation of Chopped Whole-Plant Corn (WPC) Using Discrete Element Method (DEM)

Fractionating whole-plant corn (WPC) in a single-pass harvesting system requires studies on the WPC-to-equipment interaction for improved property control, as well as mechanical and air-driven separation processes compared to the traditional multi-pass grain and stover harvesting system. The discrete element method (DEM) technique has the potential to simulate WPC mechanical fractionation and support simulation-based design of WPC separation processes. In this study, methods to develop DEM particle models of WPC (kernel, cob, stalk, and husk) and their material properties for simulating mass fractionation using the ASABE standard mechanical shaker were proposed. Measurement was done on the axial dimensions (major, intermediate, and minor) and mass of each WPC type (mean sample size is 56), sampled from single-pass harvesting. Applying gaussian multivariate regression and bootstrapping re-sampling techniques, a DEM particle approximate to each WPC was developed. Sensitivity analysis of the DEM Young‘s modulus, Poisson‘s ratio, and interaction parameters of coefficient of restitution, coefficient of rolling friction, and coefficient of static friction on mass fraction was performed after 156 ASABE sieve-shaking DEM simulation runs, generated using Latin Hypercube Design (LHD) design of experiment (DOE) from 19 DEM material parameters. DEM simulation using Hertz-Mindlin with flexible bond contact laws and DOE optimized material properties successfully reproduced the mass fractions retained in ASABE sieves at 9.8% mean relative error and a coefficient of determination of R2 = 0.87. Here, the DEM methodology developed for mechanical WPC mass fractionation could be deployed to perform virtual design of feedstock handling equipment and performance analysis of mechanical fraction systems.

09 BIOMASS FUELS↗
DOE OSTI2021

Supply analysis of preferential market incentive for energy crops

This analysis explores the valuation of feedstock quality attributes of switchgrass and miscanthus – two energy crops poised for future expansion – and compares the relative economic availability of these two crops under two scenarios: (i) uniform price assumptions (i.e., no incentive for quality), and (ii) a scenario of a price premium based on convertibility (i.e., an incentive for quality). Given data on cellulose content, hemicellulose content, and their relative convertibility, miscanthus is expected to be 11% more efficient at conversion to biofuels than switchgrass under the biochemical conversion route. Based on this scenario of improved conversion efficiency and associated profit, we simulate an 11% price premium for miscanthus over other feedstocks in a base-case scenario. By adding this price premium, supplies of miscanthus increase over the base case by about 4 million (44%), 94 million (64%), and 166 million (94%) tons in year 0, 10, and 20 after simulated contracts for production are initiated respectively. These results emphasize that custom simulations are needed to quantify feedstock availability if supplies are intended to reflect grower response to industry demands for feedstock quality specifications. Farmers can grow ‘peas or carrots’, and price signals from biorefineries will influence what energy crops they produce. Recognizing that the energy crop mix is tractable according to quality characteristics is relevant both for near-term and long-term biofuels research and development. Here, we recommend accounting for market preferences for quality attributes when estimating potential future supplies of energy crops.

09 BIOMASS FUELS↗
DOE OSTI2023

Techno-Economic Case Study: Fermentation Cost Impacts from Selected Critical Material Attributes

This report summarizes analysis conducted to support a case study under the Feedstock-Conversion Interface Consortium (FCIC) focused on techno-economic analysis (TEA) modeling to quantify the economic implications of biomass hydrolysate substrate variability on fermentation performance and resultant biorefinery fuel yields. It is known that fermentation inhibitors or byproducts, as may either come from constituents in the biomass feedstock or imparted through biorefinery processing operations, can detrimentally impact fermentation rates and yields. However, it is often difficult to isolate fermentation impacts to individual components given the complex nature of biomass varying simultaneously in multiple attributes from one lot to another. For this study, we worked with FCIC researchers to obtain data on key fermentation performance metrics, namely productivity rates and conversion yields, across a number of material attribute species previously selected by the researchers as "critical" attributes which may be found in hydrolysate used as microbial carbon sources during fermentation. These data were run through TEA models to estimate resultant impacts on biorefinery economics, reported as minimum fuel selling price (MFSP). Overall, the trends in MFSP closely followed fuel yields, in turn tied to fermentation process yields and selectivity, with minimal economic impact from variations in fermentation productivity.

09 BIOMASS FUELS↗
DOE OSTI2021

CO2ROpt (Feedstock Allocation Optimization Model) [SWR-22-13]

Reducing greenhouse gas emissions remains a critical challenge for the transportation and chemical sectors. The electrochemical reduction of carbon dioxide is a potential pathway for production of fuels and chemicals that uses atmospheric carbon dioxide as a feedstock. Here we present an analysis of the potential for carbon dioxide captured from point sources and via direct air capture to be utilized in electrochemical reduction under different market scenarios. Using a numerical optimization framework and national data sets, scenarios for nationwide production of ethylene, formate, and carbon monoxide are evaluated at scales comparable to current production of these molecules in the United States. We show that developing a network for production of these products at scale requires capture and utilization of significant portions of the carbon dioxide that is currently emitted from large stationary point sources. Because carbon dioxide point sources are spatially and compositionally variable, their use for carbon dioxide reduction depends on electricity prices, capture cost, and location. If the power sector in the United States is decarbonized, carbon dioxide supply decreases significantly, increasing the importance of utilizing other carbon dioxide streams, and increasing the likelihood that direct air capture plays a role in supplying carbon dioxide feedstocks. These findings provide a first insight into the feedstock and energy constraints for carbon dioxide reduction.

Badgett, Alex↗
DOE OSTI2023

Air Classification of Forest Residue for Tissue and Ash Separation Efficiency

The goal of this Case Study was to evaluate the performance of air classification of logging residues toward meeting conversion CMAs for carbon and ash contents, as compared to the static status quo Base Case system in which the residues are first dried and then ground in a hammer mill with a 6 mm screen and fines less than 1.18 mm are removed. Also considered were moisture and ash impacts on throughput and Overall Operating Effectiveness (OOE), as well as delivered feedstock cost and minimum fuel selling price (MFSP). Laboratory data on the impacts of fan speed and moisture content on the separation efficiency of soil ash, needles and bark from white wood were received from FCIC Subtask 5.2: Preprocessing, High Temperature Conversion Preprocessing (Jordan Klinger and Tiasha Bhattacharjee, INL). Average throughput and energy consumption data were obtained from the Bioenergy Feedstock National User Facility (BFNUF) (Neal Yancey, INL) for the same air classifier. These data were utilized to develop the necessary response surface equations to perform throughput analysis using discrete event simulation. Feedstock-Conversion Interface Consortium. Because the Base Case status quo system utilizes drying prior to grinding, we modeled the Case Study with drying prior to air classification and subsequent grinding of the separated white wood to isolate the individual quality and cost impacts of air classification relative to the Base Case system.

CMA↗
DOE OSTI2023

Techno-Economic Case Study: Low-Temperature Conversion Performance Based on Isolated Anatomical Fractions of Corn Stover

This report summarizes analysis conducted to support a case study under the Feedstock-Conversion Interface Consortium (FCIC) focused on techno-economic analysis (TEA) modeling to quantify the yield and cost ramifications for processing isolated anatomical fractions of corn stover through a low-temperature conversion (biochemical pathway) biorefinery. It is hypothesized that different individual anatomical fractions of corn stover vary in composition and recalcitrance, such that processing each fraction on its own e.g. through dedicated campaigns may enable economic benefits relative to processing the whole stover material. To investigate this concept, we worked with FCIC researchers to obtain data on compositional analysis, as well as processing conditions and yields, for conversion of whole corn stover plus three individual anatomical fractions (cobs, husks, and stalks) across key steps of the biorefinery conversion process within FCIC research scope, namely pretreatment and enzymatic hydrolysis. After running the data through the TEA models, fractionated cobs and husks achieved higher fuel yields and lower minimum fuel selling prices than whole corn stover, but stalks fared worse than whole stover on both metrics. The most direct takeaway from this assessment is that a biorefinery would stand to benefit economically from maximizing the use of cob and husk fractions while avoiding or minimizing the use of stalks, though recognizing practical constraints with this approach in maintaining an equivalent processing capacity (fixed at 2,000 dry metric tonne per day in all cases).

09 BIOMASS FUELS↗
DOE OSTI2024

The Role of Biofuels and Biomass Feedstocks for Decarbonizing the U.S. Economy by 2050 - (DECARB) Decarbonizing Energy Through Collaborative Analysis of Routes and Benefits

Utilizing biomass resources, such as cellulosic biomass and waste, can greatly contribute to decarbonization efforts in the U.S. economy. The U.S. bioenergy sector includes corn ethanol production, biodiesel, renewable diesel production, and the utilization of biomass wastes for electricity generation being the primary applications. Within the electricity sector, biopower can play a crucial role as a stable low-carbon resource. Enhancing the electricity mix's diversity could enhance grid reliability. If the issues regarding hot gas cleanup can be resolved, flexible biopower resources like biomass gasification facilities could complement the integration of variable renewable energy sources due to their quick ramp-up and ramp-down times. The criticality of bioenergy deployment lies in its ability to decarbonize hard-to-electrify sectors, such as aviation, where alternative decarbonization options may not be viable in the short term. Moreover, bioenergy has the potential to be converted into process heating, building materials, and plastics, which are not considered in this study. A set of pathways was carefully chosen to represent viable options for converting ample herbaceous and woody cellulosic feedstocks into fuels, chemicals, and electricity in this study. In conclusion, biomass pathways provide flexibility by generating various types of bioenergy and bioproducts, including electricity, hydrogen, liquid fuels, biochemicals, and bioplastics. When paired with carbon dioxide capture and storage (CCS), specific bioenergy approaches can effectively extract carbon dioxide from the atmosphere, thus providing an effective decarbonization option for the transportation sector.

09 BIOMASS FUELS↗
DOE OSTI2024

Sustainable and Energy-Efficient Production of Rare-Earth Metals via Chloride-Based Molten Salt Electrolysis

Neodymium metal is a critical component of rare earth magnets, essential for electric vehicles and the green energy transition, but its production has severe environmental impacts across its mining, separation, purification, and metal electrowinning steps. Specifically, conventional neodymium electrowinning in oxyfluoride molten salts using a consumable graphite anode generates greenhouse gases, e.g., carbon dioxide and perfluorocarbon (PFC). We propose an alternative chloride-based molten salt electrolysis process utilizing a novel dimensionally stable anode (DSA). Our process lowers the specific electrical energy consumption compared to the state of the art, while producing reusable chlorine gas and eliminating direct CO 2 and PFC emissions. Chloride-based molten salt electrolysis of NdCl 3 (1.65 M) added to a LiCl–KCl eutectic (45:55 wt %), while using a RuO 2 -coated DSA enables high Coulombic efficiency (>80%), low specific energy consumption (2.3 kWh/kg-Nd), and excellent electrowon Nd product purity (>97 wt %). Life cycle analysis, excluding the common input feedstock (Nd 2 O 3 ), shows that the global warming potential for the proposed chloride-based electrolysis approach is 5 kg CO 2 equivalent, compared to 9–16 kg CO 2 equivalent for the conventional process, representing a 44–69% reduction in CO 2 emissions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Image Analysis for Rapid Assessment and Quality-Based Sorting of Corn Stover

Imaging in the visible spectrum is a low-cost tool that can be readily deployed for in-field or over-belt monitoring of biomass quality for bio-refining operations. Rapid image analysis coupled with innovative preprocessing may reduce the impacts of feedstock variability through identification of contaminants or other material attributes to guide selective sorting and quality management. Image analysis was employed to evaluate the quality of corn stover in red-green-blue (RGB) chromatic space. This study used controlled, bench-scale imaging as a proof-of-concept for rapid quality assessment of corn stover based on variations in material attributes, including chemical and physical attributes, that relate to biological degradation and soil contamination. Additionally, logistic regression-based classification algorithms were used to develop a method for biomass screening as a function of biological degradation or soil contamination. This study demonstrated the use of image analysis to extract features from RGB color space to investigate variations in critical material attributes from chemical composition of corn stover. Fourier transform infrared (FT-IR) suggested a correlation between red band intensity and biological degradation, while detailed surface texture analysis was found to distinguish among variations in ash. These insights offer promise for development of a rapid screening tool that could be deployed by farmers for in-field assessment of biomass quality or biorefinery operators for in-line sorting and process optimization.

09 BIOMASS FUELS↗
DOE OSTI2022

Techno‐economic assessment of single‐stream feedstock logistics supply chain for corn stover and grain

Abstract The state‐of‐technology for corn stover harvest is a multi‐pass system that collects the stover after grain harvest. An alternative is a single‐stream system where the grain and stover are harvested as a bulk material co‐stored and preserved by anerobic fermentation, and finally, co‐transported to a biorefinery. In the present work, four single‐pass whole‐plant bulk systems were compared with a conventional multi‐pass bale system. The single‐stream systems consisted of the harvest of corn grain and a portion of the stover fraction. Four machine configurations were simulated. This work predicted that a multi‐pass bale system would result in a material cost of 111.80 $2021 Mg –1 stover DM delivered to the biorefinery gate. Alternatively, the lowest cost single‐stream system was the self‐propelled forage harvester (SPFH) configured with the whole‐plant header, which delivered feedstock for 74.76 $2021 Mg stover DM –1 . In addition to machine configuration, a sensitivity analysis was performed to understand important drivers of feedstock cost. These analyses revealed that feedstock cost increased with moisture content, fertilizer price, and biorefinery size, and decreased with harvest season length, crop yield, and grower participation. This work demonstrated that single‐stream systems could reduce corn stover feedstock costs in comparison with state‐of‐technology systems. © 2022 The Authors. Biofuels, Bioproducts and Biorefining published by Society of Industrial Chemistry and John Wiley & Sons Ltd.

09 BIOMASS FUELS↗
DOE OSTI2022

Experimental-based mechanistic study and optimization of hydrothermal liquefaction of anaerobic digestates

Valorization of agricultural and food waste digestates is crucial for sustainable waste management to reduce environmental impacts and improve the economics of commercial farms. Hydrothermal liquefaction (HTL) of anaerobic digestates was evaluated to recover resources by converting them into carbon-dense biocrude oil and a nutrient-rich HTL aqueous phase (HTL-AP) coproduct. The effects of HTL temperature (280–360 °C), reaction time (10–50 min), feedstock pH (2.5–8.5), digestate salt content (1–5 wt%), and digestate cellulose-to-lignin ratio (0.2–1.8) on energy and nutrient recovery were systematically investigated in a set of well-designed experiments following a half-fractional central composite protocol. Response surface analysis combined with HTL product characterization and comparative literature study produced a comprehensive reaction pathway for HTL of anaerobic digestates. Moreover, this analysis revealed the importance of acidic feedstocks (pH 3.00–5.53), high reaction temperatures (337–360 °C), and reaction times <45 or 45–50 min for digestates with Cel/Lig >1 or <1, for maximizing the energy recovered in biocrude (high carbon yield and low heteroatom content) and the amounts of P, NH 3 –N, and Mg distributed in the HTL-AP. Acidic conditions catalyzed biocrude production, inhibited the Maillard reaction (lowering the nitrogen content in biocrude), and partitioned nutrients into the HTL-AP. Higher reaction temperatures coupled with longer reaction times activated hydro-denitrogenation and deoxygenation reactions to improve biocrude quality. Finally, this work provides not only validated methods to achieve targeted resource recovery for specific feedstock compositions using HTL, but also a comprehensive mechanistic understanding of the HTL of biomass waste for controlling target product characteristics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗