Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FREQUENCY DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

AC Magnetic Field Frequency Dependence of Magnetoacoustic Emission

Our recent study has proved a strong correlation between the low-frequency AC applied magnetic field amplitude dependence of the asymmetry of the magnetoacoustic emission (MAE) burst and the strength of the domain wall-defect interaction in iron-base ferromagnets. For the present study the AC magnetic field frequency dependence of the asymmetry has been investigated in the range of 1 to 200 Hz. When represented by the third moment of the rectified acoustic emission pulses, the asymmetry becomes a bell-shaped function of frequency with its center located around 25 Hz. This experiment has been performed with low carbon, high yield stress steel specimens of three different levels of domain wall-defect interaction strength. The results show that the increase in the interaction strength causes a vertical down shift of the asymmetry in the entire frequency range investigated.

Namkung, M.↗
DOE OSTI2017

The Frequency-dependent Damping of Slow Magnetoacoustic Waves in a Sunspot Umbral Atmosphere

High spatial and temporal resolution images of a sunspot, obtained simultaneously in multiple optical and UV wavelengths, are employed to study the propagation and damping characteristics of slow magnetoacoustic waves up to transition region heights. Power spectra are generated from intensity oscillations in sunspot umbra, across multiple atmospheric heights, for frequencies up to a few hundred mHz. It is observed that the power spectra display a power-law dependence over the entire frequency range, with a significant enhancement around 5.5 mHz found for the chromospheric channels. The phase difference spectra reveal a cutoff frequency near 3 mHz, up to which the oscillations are evanescent, while those with higher frequencies propagate upward. The power-law index appears to increase with atmospheric height. Also, shorter damping lengths are observed for oscillations with higher frequencies suggesting frequency-dependent damping. Using the relative amplitudes of the 5.5 mHz (3 minute) oscillations, we estimate the energy flux at different heights, which seems to decay gradually from the photosphere, in agreement with recent numerical simulations. Furthermore, a comparison of power spectra across the umbral radius highlights an enhancement of high-frequency waves near the umbral center, which does not seem to be related to magnetic field inclination angle effects.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1990

The amplitudes of interplanetary fluctuations - Stream structure, heliocentric distance, and frequency dependence

A study is presented of the heliocentric distance, frequency, and stream structure dependence of the amplitudes of interplanetary fluctuations in the velocity and magnetic field from 0.3 to nearly 20 AU and for spacecraft-frame periods of 10 days to a few hours. Evidence is presented that, at a given heliocentric distance, the amplitude of the magnetic field fluctuations is proportional to the magnitude of the field, nearly independently of the solar wind speed. The radial evolution of magnetic fluctuations is shown to be nearly consistent with WKB expectations except at smaller scales in the inner heliosphere and at the largest scales in the outer heliosphere. While the large-scale velocity fluctuations are kinetic energy-dominated in the inner heliosphere due to the presence of streams, the magnetic fluctuation energy eventually comes to be slightly dominant over the kinetic energy at all scales. The theoretical implications of the results are considered.

Roberts, D. A.↗
DOE OSTI2018

Frequency Dependence of the Conductivity of Disordered Semiconductors in the Region of the Transition to the Fixed-Range Hopping Regime

The effect of hybridization of electron states on the high-frequency conductivity of disordered semiconductors is studied. It is shown that the dependence of the pre-exponential factor of the resonance integral on the intercenter separation in a pair determines the abruptness of the change in conductivity mechanisms near the transition of the frequency dependence of the real part of the conductivity σ{sub 1}(ω) from sublinear to quadratic. The abruptness of the change of the conductivity regimes is associated with a rapid decrease in hopping distance with increasing frequency near the transition, which leads to a substantial relative decrease in the contribution from the phononless conductivity component in the variable-range hopping regime with increasing frequency and transition to the fixed-range hopping conductivity regime.

36 MATERIALS SCIENCE↗
DOE OSTI2018

On the Physical Meaning of Disperse Parameters of Frequency Dependence of Dielectric Permittivity in the Havriliak–Negami Model

This paper is devoted to an analysis of the frequency dispersion of dielectric permittivity in order to establish the physical meaning of the dispersion parameters α and β in the Havriliak–Negami model. It is found that parameter α is associated with the spectrum broadening of relaxation time τ. Examples with the appearance of a dispersion with parameter α of about 0.4 and 0.7 are presented. A conclusion is drawn that disorder creates a broadening of the relaxation times. Dispersion parameters α and β are introduced to preserve the unified relaxation time. The possibility of the analysis of experimental results on the basis of the Debye model in order to obtain the relaxation time distribution and determine parameters α and β according to the log(τ{sub HN}/τ) chart is shown.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Atomic-scale imaging of frequency-dependent phonon anisotropy

Directly visualizing vibrational anisotropy in individual phonon modes is essential for understanding a wide range of intriguing optical, thermal and elastic phenomena in materials. Although conventional optical and diffraction techniques have been used to estimate vibrational anisotropies, they fall short in achieving the spatial and energy resolution necessary to provide detailed information. Here, we introduce a new form of momentum-selective electron energy-loss spectroscopy, which enables the element-resolved imaging of frequency- and symmetry-dependent vibrational anisotropies with atomic resolution. Vibrational anisotropies manifest in different norms of orthogonal atomic displacements, known as thermal ellipsoids. Using the centrosymmetric strontium titanate as a model system, we observed two distinct types of oxygen vibrations with contrasting anisotropies: oblate thermal ellipsoids below 60 meV and prolate ones above 60 meV. In non-centrosymmetric barium titanate, our approach can detect subtle distortions of the oxygen octahedra by observing the unexpected modulation of q-selective signals between apical and equatorial oxygen sites near 55 meV, which originates from reduced crystal symmetry and may also be linked to ferroelectric polarization. These observations are quantitatively supported by theoretical modelling, which demonstrates the reliability of our approach. The measured frequency-dependent vibrational anisotropies shed new light on the dielectric and thermal behaviours governed by acoustic and optical phonons. Furthermore, the ability to visualize phonon eigenvectors at specific crystallographic sites with unprecedented spatial and energy resolution opens new avenues for exploring dielectric, optical, thermal and superconducting properties.

Ferroelectrics and multiferroics↗
DOE OSTI2018

Advancement in the Understanding of the Field and Frequency Dependent Microwave Surface Resistance of Niobium

The radio-frequency surface resistance of niobium resonators is incredibly reduced when nitrogen impurities are dissolved as interstitial in the material, conferring ultra-high Q-factors at medium values of accelerating field. This effect has been observed in both high and low temperature nitrogen treatments. As a matter of fact, the peculiar anti Q-slope observed in nitrogen doped cavities, i.e. the decreasing of the Q-factor with the increasing of the radio-frequency field, come from the decreasing of the BCS surface resistance component as a function of the field. Such peculiar behavior has been considered consequence of the interstitial nitrogen present in the niobium lattice after the doping treatment. The study here presented show the field dependence of the BCS surface resistance surface of cavities with different resonant frequencies, such as: 650 MHz, 1.3 GHz, 2.6 GHz and 3.9 GHz, and processed with different state-of-the-art surface treatments. These findings show for the first time that the anti Q-slope might be seen at high frequency even for clean Niobium cavities, revealing useful suggestion on the physics underneath the anti Q-slope effect.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

Mechanisms of Frequency-Dependent Conductivity of Mesoporous Silicon at γ Irradiation with Small Doses

Abstract—The effect of low-dose γ radiation on the mechanisms of low-frequency conductivity of mesoporous silicon has been studied. It has been shown that γ irradiation preserves the hopping character of conductivity at a change of the frequency of phonon lattice vibrations, a decrease in the size of the hop, and a shift of the level of the capture of traps to the Fermi level in the band gap, which makes the structure with mesoporous silicon irradiated by γ radiation promising for the creation of multifunctional resistive and capacitive devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2015

Frequency dependence of the maximum operating temperature for quantum-cascade lasers up to 5.4 THz

We report on the observation of an approximately linear reduction in the maximum operating temperature with an increasing emission frequency for terahertz quantum-cascade lasers between 4.2 and 5.4 THz. These lasers are based on the same design type, but vary in period length and barrier height for the cascade structure. The sample emitting at the highest frequency around 5.4 THz can be operated in pulsed mode up to 56 K. We identify an additional relaxation channel for electrons by longitudinal optical phonon scattering from the upper to the lower laser level and increasing optical losses toward higher frequencies as major processes, leading to the observed temperature behavior.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Temperature, rf field, and frequency dependence performance evaluation of superconducting niobium half-wave coaxial cavity

Recent advancement in superconducting radio frequency cavity processing techniques, with diffusion of impurities within the RF penetration depth, resulted in high quality factor with increase in quality factor with increasing accelerating gradient. The increase in quality factor is the result of a decrease in the surface resistance as a result of nonmagnetic impurities doping and change in electronic density of states. The fundamental understanding of the dependence of surface resistance on frequency and surface preparation is still an active area of research. Here, we present the result of RF measurements of the TEM modes in a coaxial half-wave niobium cavity resonating at frequencies between 0.3 ? 1.3 GHz. The temperature dependence of the surface resistance was measured between 4.2 K and 1.6 K. The field dependence of the surface resistance was measured at 2.0 K. The baseline measurements were made after standard surface preparation by buffered chemical polishing.

Dhakal, P.↗
DOE OSTI2015

Temperature- and frequency-dependent dielectric properties of organic–inorganic hybrid compound: (C{sub 6}H{sub 9}N{sub 2}){sub 2}(Hg{sub 0.75}Cd{sub 0.25})Cl{sub 4}

Highlights: • We have synthesized a new hybrid compound of composition (C6H9N2)2(Hg0.75Cd0.25)Cl4. • The Ac conductivity of the title material was studied as a function of frequency and temperature. • The dielectric data have been analyzed in modulus formalism using KWW. - Abstract: The bis-2-amino-4-picolinium tetrachloromercurate-cadmate compound (C{sub 6}H{sub 9}N{sub 2}){sub 2}(Hg{sub 0.75}Cd{sub 0.25})Cl{sub 4} was prepared by hydrothermal method and characterized by X-ray diffraction (XRD) technique. The electrical properties of the compound were studied using impedance spectroscopy in the frequency and temperature range of 200 Hz–5 MHz and 308–403 K, respectively. The equivalent circuit is modeled by a combination of a parallel Rp//CPE circuit to explain the impedance results. The dielectric data were analyzed using complex electrical modulus M* at various temperatures. The activation energy responsible for the relaxation calculated from the modulus spectra is found to be almost the same as the value obtained from the temperature variation of dc conductivity. The electrical modulus and its scaling behavior are also investigated.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Frequency dependence of BCS and residual resistance using multi-mode measurement of nitrogen-doped single-cell elliptical cavities

Various cavity surface treatments have been found to significantly improve cavity quality factor, Q0, with one such treatment being nitrogen-doping (N-doping). N-doped 1.3 GHz cavities were the first found to exhibit anti-Q slope, the increase of Q0 with accelerating field, Eacc. However, even with the use of the same N-doping recipes, this anti-Q slope behavior has not been realized in sub-GHz frequency cavities. In this study, we measured the Q0 and surface resistance, RS, of our N-doped, single-cell, elliptical cavity for both the 644 MHz fundamental mode (FM) and 1.45 GHz higher-order mode (HOM). As a result of multi-mode measurements, the BCS and residual resistances, the temperature-dependent and temperature-in-dependent RF surface resistances, could be determined without the influence of cavity-to-cavity surface treatment variations. We will discuss the frequency-dependent behaviors of the BCS and residual resistances.

Accelerator Physics↗
DOE OSTI2014

Energy and frequency dependence of the alpha particle redistribution produced by internal kink modes

The redistribution of alpha particles due to internal kink modes is studied. The exact particle trajectories in the total fields, equilibrium plus perturbation, are calculated. The equilibrium has circular cross section and the plasma parameters are similar to those expected in ITER. The alpha particles are initially distributed according to a slowing down distribution function and have energies between 18 keV and 3.5 MeV. The (1, 1), (2, 2), and (2, 1) modes are included and the effect of changing their amplitude and frequency is studied. When only the (1, 1) mode is included, the spreading of high energy (E≳1 MeV) alpha particles increases slowly with the energy and mode frequency. At lower energies, the redistribution is more sensitive to the mode frequency and particle energy. When a (2, 1) mode is added, the spreading increases significantly and particles can reach the edge of the plasma. Trapped particles are the most affected and the redistribution parameter can have maxima above 1 MeV, depending on the mode frequency. These results can have important implications for ash removal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1972

Frequency dependence of ATS-1 observed micropulsations of some geophysical parameters

Low frequency oscillations in the earth's magnetic field at the synchronous orbit were observed with the magnetometer experiment on board the ATS 1 satellite since Dec. 1966. An analysis of oscillations in the range .002 f .02 H3 for the interval Dec. 1966 through Dec. 1968 is reported. It was found that the frequency of an event increases with the sum of Kp for 24 hours prior to the event midpoint. For events with duration greater than 6 hours, the product moment correlation coefficient for frequency f, and the sum Kp was R = 0.87. The best least squares linear fit to the data for these events was f = (0.32) sum Kp = 5.1. For the same events the correlation coefficient for frequency and Dst was R = -0.83.

Mason, F.↗
NASA NTRS1979

Temperature and frequency dependence of ultrasonic attenuation in selected tissues

Ultrasonic attenuation over the frequency range of 1.5-10 MHz has been measured as a function of temperature for porcine liver, backfat, kidney and spleen as well as for a single specimen of human liver. The attenuation in these excised specimens increases nearly linearly with frequency. Over the temperature range of approximately 4-37 C the attenuation decreases with increasing temperature for most soft tissue studied.

Gammell, P. M.↗
DOE OSTI2014

Investigation of trap states in high Al content AlGaN/GaN high electron mobility transistors by frequency dependent capacitance and conductance analysis

Trap states in Al{sub 0.55}Ga{sub 0.45}N/GaN Schottky-gate high-electron-mobility transistors (S-HEMTs) and Al{sub 2}O{sub 3}/Al{sub 0.55}Ga{sub 0.45}N/GaN metal-oxide-semiconductor HEMTs (MOS-HEMTs) were investigated with conductance method in this paper. Surface states with time constant of (0.09–0.12) μs were found in S-HEMTs, and electron tunneling rather than emission was deemed to be the dominant de-trapping mechanism due to the high electric field in high Al content barrier. The density of surface states evaluated in S-HEMTs was (1.02–4.67)×10{sup 13} eV{sup −1}·cm{sup −2}. Al{sub 2}O{sub 3} gate insulator slightly reduced the surface states, but introduced low density of new traps with time constant of (0.65–1.29) μs into MOS-HEMTs.

36 MATERIALS SCIENCE↗
NASA NTRS2004

Frequency dependence of single-event upset in advanced commercial PowerPC microprocessors

Single-event upset (SEU) from heavy ions is measured for advanced commercial microprocessors in a dynamic mode with clock frequencies up to 1 GHz. Frequency and core voltage dependence of SEUs in registers and D-Cache are discussed. The results of our studies suggest the SEU in registers and D-Cache tend to increase with frequency. This might have important implications for the overall SEU trend as technology moves toward higher frequencies.

Farmanesh, F. F.↗