Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FORGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Crack toughness evaluation of hot pressed and forged beryllium.

Fracture toughness tests at room temperature were made on three-point loaded beryllium bend specimens cut from hot pressed block and a forged disk. These specimens had plane proportions conforming to ASTM E 399 and covered a thickness range of from 1/32 to 1/2 in. Two sets of bend specimens were tested, one having fatigue cracks and the other 0.5 mil radius notches. One objective of the investigation was the development of techniques to produce fatigue cracks in accordance with the procedures specified in ASTM E 399. This objective was achieved for the hot pressed material. In plane cracks were not consistently produced in the specimens cut from forged stock.

Jones, M. H.↗
NASA NTRS1974

Vibration control in forge hammers

Special measures are discussed for calculating, designing and executing a forge hammer foundation, so that the vibrations that occur during its working will not be transmitted to neighboring machinery, workrooms and offices. These vibrations are harmful to the workers near the forge hammer.

Moise, F.↗
NASA NTRS1978

Nine percent nickel steel heavy forging weld repair study

The feasibility of making weld repairs on heavy section 9% nickel steel forgings such as those being manufactured for the National Transonic Facility fan disk and fan drive shaft components was evaluated. Results indicate that 9% nickel steel in heavy forgings has very good weldability characteristics for the particular weld rod and weld procedures used. A comparison of data for known similar work is included.

Young, C. P., Jr.↗
NASA NTRS1990

Compression behavior of the forged Ll2 compounds Al67Ti25Cr8 and Al66Ti25Mn9

The paper presents the findings of a compression study as a function of temperature from cryogenic temperatures to 1373 K at a strain rate of about 0.0001/s on forged Al67Ti25Cr8 and Al66Ti25Mn9 compounds. The creep response of these alloys is analyzed at strain rates varying from 2 x 10 to the -4th to 2 x 10 to the -7th /s at 1000 K and 1100 K. It is shown that as-cast microstructures for both compounds are dendritic, while both intermetallics forged very well with no edge cracking, with the microstructures appearing fully recrystallized. True comprehensive stress-strain diagrams determined at 1100 K as a function of nominal strain rate reveal a range of behaviors in both materials.

Brown, S. A.↗
NASA NTRS1953

Behavior of Forged S-816 Turbine Blades in Steady-state Operation of J33-9 Turbojet Engine with Stress-rupture and Metallographic Evaluations / by F. B.garrett, C. A. Gyorgak, and J. W. Weeton

An investigation was conducted to determine the behavior of recently produced, forged S-816 turbine blades in a full-scale turbojet engine, and in particular, the scatter in performance of the alloy. The turbine blades were operated as continuously as possible at a temperature of 1500 degrees F and a centrifugal stress of 21,500 pounds per square inch. The operating lives of the turbine blades varied from 181 to 539 hours, a range of 358 hours. Stress-rupture properties of specimens cut from blade airfoils also varied considerably, as much as 1257 hours at 20,000 pounds per square inch and 1500 degrees F. Since the variability of scatter of stress-rupture data is greater than that of blade performance, the scatter is probably caused by variations in the properties of the forged blades rather than by variations caused by engine operation or installation of the blades. Metallographic examinations were made to determine possible causes of the scatter and although numerous differences in microstructures of blades were found, no consistent tendencies were observed and the findings did not permit an explanation of the scatter of blade performance. The results of the metallographic examinations and of the physical tests indirectly indicated variables in the fabricating method caused the scatter in properties.

Garrett, Floyd B↗
DOE OSTI2022

Utah FORGE Groundwater Levels: Updated March 2022

This Excel spreadsheet contains Utah FORGE groundwater data for wells WOW2 and WOW3. The data was updated on March 16th, 2022 and contains legacy data. Groundwater data includes the level, offset, date, and time for each measurement. Temperature, drift, water elevation and other parameters are recorded. Figures in the data include a water elevation over time plot. Legacy data ranges from year 1976 to 2019 and updated data ranges from year 2019 to 2021.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Utah FORGE Well 16A(78)-32 Stimulation Data (April, 2022)

This is a set of data related to the stimulation program at Utah FORGE well 16A(78)-32 during April, 2022. This includes daily reports, 1 second Pason data, tracer data, and shear stimulation data and information including a report of an evolving prognosis for the stimulation operations.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Utah FORGE: Southwestern Utah Magnetotelluric (MT) Data

This comprehensive magnetotellurics (MT) dataset, which covers southwestern Utah, integrates 600 sites from various surveys, including those from the Utah FORGE, SubTER, and Play Fairway projects, all of which are linked below. The core of this dataset is the use of a 3D finite element (FE) algorithm for inversion imaging, allowing for detailed analysis of the MT data. Provided here are all .edi files, the 3D finite element mesh (with a readme file), graphic slices, node graphics, resistivity graphics, and reports on the acquisition areas and inversion.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Utah FORGE Downhole Geophone Seismic Data (August 2022)

This is a link to downhole geophone data collected by Schlumberger. These data were collected in the Utah FORGE deep seismic monitoring wells 58-32 and 56-32. The format is a standard SEGY and the units are bits. To convert to acceleration (m/s2) multiply by 2.333 x 10-7. Use one of the scripts linked below to use wget commands to pull the data.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Utah FORGE GeoThermOPTIMAL Video

This is a project description video by Dr. William W. Fleckenstein related to their "Development of Multi-Stage Fracturing System and Wellbore Tractor to Enable Zonal Isolation During Stimulation and EGS Operations in Horizontal Wellbores" R&D project at Utah FORGE which is linked bellow.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Utah FORGE: Documentation on Discrete Fracture Network and Fracture Propagation Modelling

This dataset includes reports and a slide presentation on discrete fracture network (DFN) generation and hydraulic fracture modeling at the Utah FORGE site. It details the characterization of natural fractures using well log and core data, as well as stochastic modeling techniques. The reports describe simulations of hydraulic fracture propagation, fluid-mechanical interactions, and induced microseismicity. The dataset also includes history-matching of net pressure and analyses of fracture growth in naturally fractured geothermal reservoirs. The slides summarize key findings and future research directions.

15 GEOTHERMAL ENERGY↗
DOE OSTI2023

Utah FORGE: InSAR Data Best Pairs

This submission provides Interferometric Synthetic Aperture Radar (InSAR) data covering the Utah FORGE site via the TerraSAR-X and TanDEM-X satellite missions operated by the German Space Agency (DLR). Data was collected between 2019/01/01 and 2023/06/30. Interferometric pairs (interferograms) were created using generic mapping tool GMT-SAR processing software. The best 112 pairs were selected based on having short orbital separations (perpendicular baseline less than 5 meters in absolute value).

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Utah FORGE: Interferometric Synthetic Aperture Radar Data from 2023 and 2024

The dataset comprises Interferometric Synthetic Aperture Radar (InSAR) data from the TerraSAR-X and TanDEM-X satellite missions, covering the Utah FORGE site. This data includes interferometric pairs created using GMT-SAR processing software, chosen for their short orbital separations between May 1, 2023, and June 30, 2024. Included are various data and metadata, including Digital Elevation Models, unit vectors, and correlation coefficients. The dataset is packaged in several compressed tar files and formatted in NetCDF. To utilize this dataset, users will need software capable of handling NetCDF files and tools for decompressing tar files.

15 GEOTHERMAL ENERGY↗
DOE OSTI2024

Corrosion mechanism of cold forged 316 stainless steel in molten FLiNaK salt

This study examined how cold forging (CF) affects the corrosion of 316 stainless steel (SS) in molten FLiNaK salt at 700 °C for 48 h. CF samples had two corrosion areas: one near the top and another displaying intergranular corrosion (IGC). Samples with lower CF (5–30 %) showed more IGC, while the 50 % CF sample had less IGC but the shallowest corrosion depth. This was due to the increased number of grain boundaries, which raised the potential corrosion initiation sites, and certain grain boundaries promoting chromium dissolution, thus enhancing IGC.

FLiNaK↗
DOE OSTI2024

Adaptively remeshed multiphysical modeling of resistance forge welding with experimental validation of residual stress fields and measurement processes

Welding processes used in the production of pressure vessels impart residual stresses in the manufactured component. Computational modeling is critical to predicting these residual stress fields and understanding how they interact with notches and flaws to impact pressure vessel durability. Here, in this work, we present a finite element model for a resistance forge weld and validate it using laboratory measurements. Extensive microstructural changes, near-melt temperatures, and large localized deformations along the weld interface pose significant challenges to Lagrangian finite element modeling. The proposed modeling approach overcomes these roadblocks in order to provide a high-fidelity simulation that can predict the residual stress state in the manufactured pressure vessel; a rich microstructural constitutive model accounts for material recrystallization dynamics, a frictional-to-tied contact model is coordinated with the constitutive model to represent interfacial bonding, and adaptive remeshing is employed to alleviate severe mesh distortion. An interrupted-weld approach is applied to the simulation to facilitate comparison to displacement measures. Several techniques are employed for residual stress measurement in order to validate the finite element model: neutron diffraction, the contour method, and the slitting method. Model-measurement comparisons are supplemented with detailed simulations that reflect the configurations of the residual-stress measurement processes themselves. The model results show general agreement with experimental measurements, and we observe some similarities in the features around the weld region. Factors that contribute to model-measurement differences are identified. Finally, we conclude with some discussion of the model development and residual stress measurement strategies, including how to best leverage the efforts put forth here for other weld problems.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Utah FORGE Phase 3 Native State Model: 2022 Update

This is the Phase 3 native state model update. The Phase 3 numerical model represents a significant subsurface volume below the FORGE site footprint. The model domain of 4.0 km x 4.0 km x 4.2 km is located approximately between depths of 4000 to 4200 meters below land surface. This data archive consists of 10 files, 4 of which are simulation input files and the remaining 6 are simulation output files. There is an included readme.txt file that contains details on each of the data files. The input files include meshes, FALCON code inputs, tabulated data of water properties, temperature values, and model boundaries. The output files include simulation outfiles and point data of modeled material properties.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Utah FORGE Friction-Permeability-Seismicity Laboratory Experiments with Non-Linear Acoustics

Laboratory experimental data on saw-cut interface of Westerly Granite and Utah Forge granitoid rocks. Experiments include velocity-stepping and fluid pressure stepping experiments. Mechanical data from 3 ISCO pumps connected to a Temco pressure vessel measure axial, confining and fault: fluid pressure (kPa), fluid flow rate (mL/min) and volume remaining in pump (mL). Non-linear acoustic data acquired via Verasonics systems connected to PZTs inside the pressure vessel give the timeshift, amplitude and RMS amplitude of the passing P-wave.

15 GEOTHERMAL ENERGY↗