Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FLASH effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

FueL Additives for Solid Hydrogen (FLASH) Carriers for Electric Aviation

Most UAV technologies currently rely on (non-renewable) electric power. Fuel cells with material-based H2 storage addresses this limitation and can be cost effective. The goals of this project are to develop FLASH formulation that can deliver 6g H2/100g fuel, to design, build and test fuel cell cartridge compatible with FLASH, and to test FLASH with 600 W fuel cell system and quantify cartridge and system specific energy.

AMR↗

Effects of N-Doping on Silicon Carbide

Silicon carbide (SiC) is a widely preferred material within many industries due to its favorable properties, most notably its low electrical resistivity at high temperatures, excellent thermal conductivity, and sturdy mechanical properties. Doping, particularly n-type doping, is shown to extremely reduce electrical resistivity, but due to structural changes within the lattice caused by interaction with thermal neutrons, it is possible that other attributes of SiC may also be affected. In addition to review of past literature and data, four-point probe testing, scanning electron microscopy, nanoindentation, strength tests, differential scanning calorimetry and laser flash analysis were used to investigate the effects of n-doping 3C ß-phase SiC. According to temperature dependent measurements, electric resistivity and thermal conductivity both declined as dopant levels increases. Dopant levels are shown to have a significant effect on the mechanical performance of SiC, with the highest dopant levels (4 x 1018 cm-3) providing a 40% decrease in elastic modulus from 420 GPa to 258 GPa and a 30% decrease in hardness from 40 GPa to 27.7 GPa. These values are still above average and doped SiC may prove valuable for nuclear applications.

36 MATERIALS SCIENCE↗

Code-to-code comparison between FLASH and HYDRA in gas-puff Z-pinch modeling

The numerical modeling of gas-puff Z pinches involves the nonlinear coupling of a broad range of complex, multi-physics phenomena that makes such simulations challenging. The challenge is further compounded by nonlinear instabilities that can impact the dynamics of imploding gas-puff Z pinches, such as the magneto Rayleigh–Taylor instability (MRTI). If the growth rate and amplitude of the latter is comparable to the relevant timescales and properties of the imploding plasma, the MRTI can dramatically alter implosion dynamics, dictate pinch stability, and govern the plasma properties achievable in pulsed-power-driven laboratory experiments. National Laboratories and academic teams have developed numerical tools that can accurately model Z-pinch configurations and provide reliable design capabilities that can guide experimental choices and assist in interpreting experimental results. Most such tools, however, are not broadly available. Here, we present newly developed Z-pinch simulation capabilities of the publicly available FLASH code, applied in the study of MRTI growth and dynamical effects in gas-puff implosions. To verify the new implementations, we perform a comparison of FLASH gas-puff implosion simulations with previously published calculations with the HYDRA code from Lawrence Livermore National Laboratory, which have been validated with experimental data from the CESZAR pulsed-power driver at the University of California, San Diego. The experiments involved double- and triple-nozzle configurations, in an experimental attempt to stabilize the pinch to the MRTI. The code-to-code comparison shows similar results between the FLASH and HYDRA simulations, supporting the use of FLASH in the modeling of future gas-puff Z-pinch experiments at CESZAR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

FLASH Dose Rate Helium Ion Beams: First In Vitro Investigations

To establish and investigate the effects of dose, linear energy transfer (LET), and O{sub 2} concentration on biologic response to ultrahigh dose rate (uHDR; FLASH) helium ion beams compared with standard dose rate (SDR) irradiation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Irradiation at Ultra-High (FLASH) Dose Rates Reduces Acute Normal Tissue Toxicity in the Mouse Gastrointestinal System

Preclinical studies using ultra-high dose rate (FLASH) irradiation have demonstrated reduced normal tissue toxicity compared with conventional dose rate (CONV) irradiation, although this finding is not universal. We investigated the effect of temporal pulse structure and average dose rate of FLASH compared with CONV irradiation on acute intestinal toxicity.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Deceleration-stage Rayleigh–Taylor growth in a background magnetic field studied in cylindrical and Cartesian geometries

Experiments have identified the Rayleigh–Taylor (RT) instability as one of the greatest obstacles to achieving inertial confinement fusion. Consequently, mitigation strategies to reduce RT growth and fuel–ablator mixing in the hotspot during the deceleration phase of the implosion are of great interest. In this work, the effect of seed magnetic fields on deceleration-phase RT growth are studied in planar and cylindrical geometries under conditions relevant to the National Ignition Facility (NIF) and Omega experiments. The magnetohydrodynamic (MHD) and resistive-MHD capabilities of the FLASH code are used to model imploding cylinders and planar blast-wave-driven targets. Realistic target and laser parameters are presented that suggest the occurrence of morphological differences in late-time RT evolution in the cylindrical NIF case and a measurable difference in spike height of single-mode growth in the planar NIF case. The results of this study indicate the need for target designs to utilize an RT-unstable foam–foam interface in order to achieve sufficient magnetic field amplification to alter RT evolution. Benchmarked FLASH simulations are used to study these magnetic field effects in both resistive and ideal MHD.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ratchet effects in cyclic pattern formation systems with competing interactions

Ratchet effects can appear for particles interacting with an asymmetric potential under ac driving or for a thermal system in which a substrate is periodically flashed. Here, we show that a different type of collective ratchet effect can arise for a pattern-forming system coupled to an asymmetric substrate when the interaction potential between the particles is periodically oscillated in order to cycle the system through different patterns. We consider particles with competing short-range attraction and long-range repulsion subjected to time-dependent oscillations of the ratio between the attractive and repulsive interaction terms, which causes the system to cycle periodically between crystal and bubble states. In the presence of the substrate, this system exhibits both a positive and a reversed ratchet effect, and we show that there is a maximum in the ratchet efficiency as a function of interaction strength, ac drive frequency, and particle density. In conclusion, our results could be realized for a variety of pattern-forming systems on asymmetric substrates where the pattern type or particle interactions can be oscillated.

36 MATERIALS SCIENCE↗

3D modeling of the Staged Z-pinch with the FLASH code

The Staged Z-pinch (SZP) fusion concept is a magneto-inertial compression scheme developed by Magneto-Inertial Fusion Technologies, Inc. (MIFTI), in which small amounts of fusion fuel are brought to fusion-relevant conditions by passing multi-million amperes strong current through a cylindrical shell of high atomic number material. One- and two-dimensional modeling performed by MIFTI with the MACH2 code, suggests that net fusion energy gain can be achieved when currents in the 10 million amperes range compress a 50%-50% mixture of deuterium and tritium gas. In this project we enhance and use the FLASH code to execute high-fidelity, simulations of various SZP configurations, a collaboration between the Flash Center for Computational Science at the University of Rochester and the Laboratory for Laser Energetics, and MIFTI. FLASH is a high-performance computing, multi-physics, radiation magnetohydrodynamic (MHD) code with extended physics capabilities, which is developed at the Flash Center. The goal of this project is to assess the shell/fuel stability of the pinch to two- and three-dimensional MHD instabilities and to utilize FLASH’s extended physics capabilities to understand how extended-MHD effects impact implosion dynamics and plasma conditions at stagnation. The project is a natural extension of an ongoing collaborative effort between MIFTI and the Flash Center through the U.S. DOE Advanced Research Projects Agency-Energy (ARPA-E) BETHE program and can provide MIFTI with simulation capabilities that are currently beyond their reach with MACH2. Ultimately, MIFTI wants FLASH to become one of their simulation workhorses for reliable, high-fidelity SZP platform design. During the project, the Flash Center team developed a suite of in one- and two-dimensional FLASH simulations to model different variants of the SZP platform, performed code-to-code comparisons with MACH2, and used the FLASH code to design and model SZP experiments like the Double Eagle experiments that MIFTI recently performed. Also, the Flash Center team developed the capabilities of FLASH to be able to do three-dimensional simulations of pulsed-power experiments with the code for the first time. Two publications from this effort are currently under review and two more are in preparation. MIFTI has also committed to the use of FLASH for future SZP simulation efforts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Flash graphene from rubber waste

Most conventional production processes for graphene are time-consuming, solvent-intensive, and energetically demanding. To circumvent these limitations for mass production, flash Joule heating (FJH) has been shown to be an effective method to synthesize graphene. Here, methods for optimizing production of graphene from rubber waste feedstocks are shown. Through careful control of system parameters, such as pulse voltage and pulse time, turbostratic flash graphene (tFG) can be produced from rubber waste. It is characterized by Raman spectroscopy, X-ray diffraction and thermogravimetric analysis. Here, the resulting tFG can be easily exfoliated and dispersed into various solvents because of its turbostratic arrangement. Addition of tFG into Portland cement results in a significant increase in the compressive strength of the composite. From a materials perspective, FJH offers a facile and inexpensive method for producing high quality tFG from rubber waste materials, which would otherwise be disposed of in landfills or burned for fuel. FJH allows for upcycling of low-value rubber waste into high-value carbon nanomaterials for use as reinforcing additives.

54 ENVIRONMENTAL SCIENCES↗

In-situ synchrotron X-ray diffraction of hydroxyapatite-zirconia composite during conventional and flash sintering

Here, we conducted in-situ X-ray diffraction to study the crystalline phase evolution in hydroxyapatite-zirconia composites during both conventional and flash sintering processes. Additionally, we examined the thermal history and microstructure of the composite under these sintering conditions. Despite both sintering methods reaching similar average temperatures, they yielded distinct results in terms of crystalline phase composition and microstructure. In the flash sintered samples, we observed a complete transformation of hydroxyapatite into α- tricalcium phosphate and a complete tetragonal to cubic phase transition in zirconia. Conversely, the conventionally sintered samples remained practically stable. Notably, the flash sintered samples exhibited needle-like microstructures, which were absent in their conventionally sintered counterparts. This divergence suggests that the application of an electric field plays a role in generating athermal effects during the sintering of hydroxyapatite-zirconia composites.

36 MATERIALS SCIENCE↗

A complementarity-based vapor-liquid equilibrium formulation for equation-oriented simulation and optimization

Vapor-Liquid Equilibrium (VLE) is a cornerstone of computer aided process engineering (CAPE). Embedded within process system models, VLE calculations are inherently procedural with non-smooth behavior that frequently require discrete decisions. Traditionally, these features resist the incorporation of VLE within efficient, large-scale equation-oriented (EO) process simulation and optimization strategies. On the other hand, recent reformulation of VLE models through the incorporation of complementarity constraints has broadened its scope to deal seamlessly with phase transitions and even supercritical excursions in process simulation and optimization. In this study, we extend these VLE complementarity models to EO frameworks where procedural thermodynamic property libraries are still required. Here, we develop an efficient, non-intrusive, and intuitive “square-flash” equation system that has been implemented within the IDAES Integrated Platform (IDAES-IP). Further, the effectiveness of this modular approach is demonstrated on case studies for non-ideal flash calculations and distillation optimization with disappearing phases and supercritical transitions.

97 MATHEMATICS AND COMPUTING↗

Investigation of Homogeneous Relaxation Model Parameters and their Implications for Gasoline Injectors

Flash boiling is known to be a common phenomenon for gasoline direct injection (GDI) engine sprays. The Homogeneous Relaxation Model has been adopted in many recent numerical studies for predicting cavitation and flash boiling. The Homogeneous Relaxation Model is assessed in this study. Sensitivity analysis of the model parameters has been documented to infer the driving factors for the flash-boiling predictions. The model parameters have been varied over a range and the differences in predictions of the extent of flashing have been studied. Apart from flashing in the near nozzle regions, mild cavitation is also predicted inside the gasoline injectors. The variation in the predicted time scales through the model parameters for predicting these two different thermodynamic phenomena (cavitation, flash) have been elaborated in this study. Turbulence model effects have also been investigated by comparing predictions from the standard and Re-Normalization Group (RNG) k-ε turbulence models.

33 ADVANCED PROPULSION SYSTEMS↗

Two-dimensional Thomson scattering measurements of misaligned electron density and temperature gradients and associated Biermann battery produced fields

We present optical Thomson scattering measurements of electron density and temperature in high Mach number laser-driven blast waves in homogeneous gases. Taylor–Sedov blast waves are launched in nitrogen (N2) or helium (He) at pressures between 0.4 mTorr and 10 Torr by ablating a solid plastic target with a high energy laser pulse (10 J, 1012 W/cm2). Experiments are performed at high repetition rate (1 Hz), which allows one-dimensional and two-dimensional Thomson scattering measurements over an area of several cm2 by automatically translating the scattering volume between shots. Electron temperature and density in the blast wave fronts were seen to increase with increasing background gas pressure. Measured electron density and temperature gradients were used to calculate ∂B/∂t∝∇Te×∇ne. The experimentally measured ∂B/∂t showed agreement with the magnetic field probe (B-dot) measurements, revealing that magnetic fields are generated in the observed blast waves via the Biermann battery effect. The results are compared to numerical three-dimensional collisional magnetohydrodynamic simulations performed with FLASH, and are discussed in the context of spontaneous magnetic field generation via the Biermann battery effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Studies of NGNP Reactor Cavity Cooling System With Water

This project will investigate the flow behavior that can occur in the reactor cavity cooling system (RCCS) with water coolant under the passive cooling-mode of operation. The team will conduct separate-effects tests and develop associated scaling analyses, and provide system-level phenomenological and computational models that describe key flow phenomena during RCCS operation, from forced to natural circulation, single-phase flow and two-phase flow and flashing. The project consists of the following tasks: Task 1. Conduct separate-effects, single-phase flow experiments and develop scaling analyses for comparison to system-level computational modeling for the RCCS standpipe design. A transition from forced to natural convection cooling occurs in the standpipe under accident conditions. These tests will measure global flow behavior and local flow velocities, as well as develop instrumentation for use in larger scale tests, thereby providing proper flow distribution among standpipes for decay heat removal. Task 2. Conduct separate-effects experiments for the RCCS standpipe design as two-phase flashing occurs and flow develops. As natural circulation cooling continues without an ultimate heat sink, water within the system will heat to temperatures approaching saturation , at which point two-phase flashing and flow will begin. The focus is to develop a phenomenological model from these tests that will describe the flashing and flow stability phenomena. In addition, one could determine the efficiency of phase separation in the RCCS storage tank as the two-phase flashing phenomena ensues and the storage tank vents the steam produced. Task 3. Develop a system-level computational model that will describe the overall RCCS behavior as it transitions from forced flow to natural circulation and eventual two-phase flow in the passive cooling-mode of operation. This modeling can then be used to test the phenomenological models developed as a function of scale.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Automation of debris removal and resurfacing of insulators in terawatt pulsed power systems using state of the art laser technology

The increasing complexity and scale of pulsed power systems necessitate effective maintenance strategies to ensure optimal performance and safety. This report investigates the automation of debris removal and resurfacing of insulators in terawatt pulsed power systems using advanced laser cleaning technologies. The motivation for this research stems from the limitations of current manual cleaning methods, which are labor-intensive and pose health risks due to hazardous materials. The study addresses the problem of surface flashover, a significant issue affecting insulator performance, by evaluating two innovative cleaning techniques: Pulsed Laser Cleaning (PLC) and Flash Lamp Annealing (FLA). Experimental results demonstrate that PLC effectively restores the dielectric strength of Rexolite insulators, while FLA shows limited success. The findings highlight the potential for automated cleaning solutions to enhance safety and efficiency in insulator maintenance, paving the way for future advancements in pulsed power technology.

42 ENGINEERING↗

Light desorption from an yttrium neutralizer for Rb and Fr magneto-optical trap loading

We present here the first evidence of photodesorption induced by low-intensity non-resonant light from an yttrium thin foil, which works as a neutralizer for Rb and Fr ions beam. Neutral atoms are suddenly ejected from the metal surface in a pulsed regime upon illumination with a broadband flash light and then released in the free volume of a pyrex cells. Here atoms are captured by a Magneto-Optical Trap (MOT), which is effectively loaded by the photodesorption. Loading times of the order of the flash rise time are measured. Desorption is also obtained in the continuous regime, by exploiting CW visible illumination of the metallic neutralizer surface. We demonstrate that at lower CW light intensities vacuum conditions are not perturbed by the photodesorption and hence the MOT dynamics remains unaffected, while the trap population increases thanks to the incoming desorbed atoms flux. Even with the Y foil at room temperature and hence with no trapped atoms, upon visible illumination, the number of trapped atoms reaches 10{sup 5}. The experimental data are then analyzed by means of an analytical rate equation model, which allows the analysis of this phenomenon and its dynamics and allows the determination of critical experimental parameters and the test of the procedure in the framework of radioactive Francium trapping. In this view, together with an extensive investigation of the phenomenon with {sup 85}Rb, the first demonstration of the photodesorption-aided loading of a {sup 210}Fr MOT is shown.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗