Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Extended Lagrangian dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

80 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS2015

In-Flight Aeroelastic Stability of the Thermal Protection System on the NASA HIAD, Part II: Nonlinear Theory and Extended Aerodynamics

Conical shell theory and a supersonic potential flow aerodynamic theory are used to study the nonlinear pressure buckling and aeroelastic limit cycle behavior of the thermal protection system for NASA's Hypersonic Inflatable Aerodynamic Decelerator. The structural model of the thermal protection system consists of an orthotropic conical shell of the Donnell type, resting on several circumferential elastic supports. Classical Piston Theory is used initially for the aerodynamic pressure, but was found to be insufficient at low supersonic Mach numbers. Transform methods are applied to the convected wave equation for potential flow, and a time-dependent aerodynamic pressure correction factor is obtained. The Lagrangian of the shell system is formulated in terms of the generalized coordinates for all displacements and the Rayleigh-Ritz method is used to derive the governing differential-algebraic equations of motion. Aeroelastic limit cycle oscillations and buckling deformations are calculated in the time domain using a Runge-Kutta method in MATLAB. Three conical shell geometries were considered in the present analysis: a 3-meter diameter 70 deg. cone, a 3.7-meter 70 deg. cone, and a 6-meter diameter 70 deg. cone. The 6-meter configuration was loaded statically and the results were compared with an experimental load test of a 6-meter HIAD. Though agreement between theoretical and experimental strains was poor, the circumferential wrinkling phenomena observed during the experiments was captured by the theory and axial deformations were qualitatively similar in shape. With Piston Theory aerodynamics, the nonlinear flutter dynamic pressures of the 3-meter configuration were in agreement with the values calculated using linear theory, and the limit cycle amplitudes were generally on the order of the shell thickness. The effect of axial tension was studied for this configuration, and increasing tension was found to decrease the limit cycle amplitudes when the circumferential elastic supports were neglected, but resulted in more complex behavior when the supports were included. The nominal flutter dynamic pressure of the 3.7-meter configuration was significantly lower than that of the 3-meter, and it was found that two sets of natural modes coalesce to flutter modes near the same dynamic pressure. This resulted in a significant drop in the limit cycle frequencies at higher dynamic pressures, where the flutter mode with the lower frequency becomes more critical. Pre-buckling pressure loads and the aerodynamic pressure correction factor were studied for all geometries, and these effects resulted in significantly lower flutter boundaries compared with Piston Theory alone. The maximum dynamic pressure predicted by aerodynamic simulations of a proposed 3.7-meter HIAD vehicle was still lower than any of the calculated flutter dynamic pressures, suggesting that aeroelastic effects for this vehicle are of little concern.

Goldman, Benjamin D.↗
DOE OSTI2023

Insight into Strong QCD and the Emergence of Mass from N* Experiments

Studies of nucleon resonance (N*) electroexcitation amplitudes (?vpN* electrocouplings) within a broad range of virtual photon four-momentum squared Q2 offer unique information on many facets of the strong interaction in the regime of large QCD running coupling (sQCD regime) seen in the generation of different resonances. The results on the ?vpN* electrocouplings from exclusive meson electroproduction data measured with the CLAS detector at JLab and their impact on understanding of sQCD dynamics will be presented in this talk. These CLAS data have provided the first and only available results on the evolution of the ?vpN* electrocouplings with Q2 to 5 GeV2 for most N* states in the mass range up to 1.8 GeV. A successful description of the CLAS results on the Q2-evolution of the ?(1232)3/2+, N(1440)1/2+, and ?(1600)3/2+ electrocouplings has been achieved within the continuum Schwinger method (CSM) by employing the same momentum dependence of the dressed quark mass inferred from the QCD Lagrangian, which also reproduces the experimental results on the pion elastic electromagnetic form factor and parton distribution function, and the nucleon elastic form factor. This success has demonstrated the capability for gaining insight into the emergence of hadron mass (EHM) from the exploration of the Q2-evolution of the ?vpN* electrocouplings. These studies also allow us to establish either universality or environmental sensitivity of the dressed quark mass function and to explore qq-correlation amplitudes of different spin-parities and the mixing between configurations of different orbital angular momentum. Exploration of the resonance electroexcitation with the CLAS12 detector and in the future with a possible 22 GeV machine at JLab offer the only foreseen opportunity to extend information on the ?vpN* electrocouplings for Q2 from 5-30 GeV2. Analyses of these results will cover the full range of distances where the dominant part of hadron mass and N* structure emerge from QCD.

Mokeev, Victor↗
DOE OSTI2022

Demonstrating the viability of Lagrangian in situ reduction on supercomputers

Performing exploratory analysis and visualization of large-scale time-varying computational science applications is challenging due to inaccuracies that arise from under-resolved data. In recent years, Lagrangian representations of the vector field computed using in situ processing are being increasingly researched and have emerged as a potential solution to enable exploration. However, prior works have offered limited estimates of the encumbrance on the simulation code as they consider “theoretical” in situ environments. Further, the effectiveness of this approach varies based on the nature of the vector field, benefitting from an in-depth investigation for each application area. With this study, an extended version of Sane et al. (2021), we contribute an evaluation of Lagrangian analysis viability and efficacy for simulation codes executing at scale on a supercomputer. We investigated previously unexplored cosmology and seismology applications as well as conducted a performance benchmarking study by using a hydrodynamics mini-application targeting exascale computing. Here, to inform encumbrance, we integrated in situ infrastructure with simulation codes, and evaluated Lagrangian in situ reduction in representative homogeneous and heterogeneous HPC environments. To inform post hoc accuracy, we conducted a statistical analysis across a range of spatiotemporal configurations as well as a qualitative evaluation. Additionally, our study contributes cost estimates for distributed-memory post hoc reconstruction. In all, we demonstrate viability for each application — data reduction to less than 1% of the total data via Lagrangian representations, while maintaining accurate reconstruction and requiring under 10% of total execution time in over 90% of our experiments.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

2D Magnetohydrodynamic Simulations of the Electrothermal Instability in Metallic Liners

The Virginia Tech (VT) Plasma Dynamics Laboratory Computational (PDCL) and Lawrence Livermore National Laboratory (LLNL) are performing two dimensional (2D) simulations of the electrothermal instability (ETI) using the LLNL multi-physics code Ares. Ares is a multi-physics arbitrary–Lagrangian-Eulerian (ALE) code developed by LLNL and is of particular use in studying magnetohydrodynamic (MHD) instabilities like the ETI due to its resistive MHD, magnetic diffusion, and radiative-hydrodynamics packages. Among its capabilities, it has the ability to model material strength, perform adaptive mesh refinement (AMR), and incorporate a wide variety of equations of state models and conductivity models. The 2D Ares simulation model created by VT-LLNL for studying the development and growth of the electrothermal instability has been configured with initial conditions based on the Mykonos Electrothermal Instability II (METI-II) experiments described by this grant and conducted by team members at the University of Nevada (UNR), the University of New Mexico (UNM), and Sandia National Laboratories. Previously, preliminary 2D Ares simulations of the ETI had been run to approximately 80ns. The rods in these simulations were initiated with sinusoidal perturbations at a similar order of magnitude to those measured on the aluminum rods used for the Mykonos experiment. This model has been improved by increasing the spatial resolution of the simulations and running the simulations further in time. In addition to the simulation run-times extending, the preliminary sinusoidal perturbation has been replaced with a perturbation derived from amplitude measurements by the experimental team, thereby correlating the simulation inputs better to the experimental runs. These new runs are capable of reaching 120ns of simulated time for the uncoated cases and to 200ns the 41 μm coated cases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2009

ARTEMIS: The First Mission to the Lunar Libration Orbits

The ARTEMIS mission will be the first to navigate to and perform stationkeeping operations around the Earth-Moon L1 and L2 Lagrangian points. The NASA Goddard Space Flight Center (GSFC) has previous mission experience flying in the Sun-Earth L1 (SOHO, ACE, WIND, ISEE-3) and L2 regimes (WMAP) and have maintained these spacecraft in libration point orbits by performing regular orbit stationkeeping maneuvers. The ARTEMIS mission will build on these experiences, but stationkeeping in Earth-Moon libration orbits presents new challenges since the libration point orbit period is on the order of two weeks rather than six months. As a result, stationkeeping maneuvers to maintain the Lissajous orbit will need to be performed frequently, and the orbit determination solutions between maneuvers will need to be quite accurate. The ARTEMIS mission is a collaborative effort between NASA GSFC, the University of California at Berkeley (UCB), and the Jet Propulsion Laboratory (JPL). The ARTEMIS mission is part of the THEMIS extended mission. ARTEMIS comprises two of the five THEMIS spacecraft that will be maneuvered from near-Earth orbits into lunar libration orbits using a sequence of designed orbital maneuvers and Moon & Earth gravity assists. In July 2009, a series of orbit-raising maneuvers began the proper orbit phasing of the two spacecraft for the first lunar flybys. Over subsequent months, additional propulsive maneuvers and gravity assists will be performed to move each spacecraft though the Sun-Earth weak stability regions and eventually into Earth-Moon libration point orbits. We will present the overall orbit designs for the two ARTEMIS spacecraft and provide analysis results of the 3/4-body dynamics, and the sensitivities of the trajectory design to both · maneuver errors and orbit determination errors. We will present results from the. initial orbit-raising maneuvers.

Woodward, Mark↗
DOE OSTI2022

Improved accuracy in degenerate variational integrators for guiding centre and magnetic field line flow

First-order-accurate degenerate variational integration (DVI) was introduced in Ellison et al. ( Phys. Plasmas , vol. 25, 2018, 052502) for systems with a degenerate Lagrangian, i.e. one in which the velocity-space Hessian is singular. In this paper we introduce second-order-accurate DVI schemes, both with and without non-uniform time stepping. We show that it is not in general possible to construct a second-order scheme with a preserved two-form by composing a first-order scheme with its adjoint, and discuss the conditions under which such a composition is possible. We build two classes of second-order-accurate DVI schemes. We test these second-order schemes numerically on two systems having non-canonical variables, namely the magnetic field line and guiding centre systems. Variational integration for Hamiltonian systems with non-uniform time steps, in terms of an extended phase space Hamiltonian, is generalized to non-canonical variables. It is shown that preservation of proper degeneracy leads to single-step (one-step) methods without parasitic modes, i.e. to non-uniform time step DVIs. This extension applies to second-order-accurate as well as first-order schemes, and can be applied to adapt the time stepping to an error estimate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Energy Exascale Earth System Model v2.0.1

First patch release of v2.0.0 Changes since v2.0.0 [Important change] Fix ocean threading bug seen in debug cases on Chrysalis with Intel 20.0.4. Was introduced around time of v2.0.0 tag. Does not change v2.0.0 answers on Chrysalis because those didn't use threading or debugging. [EAM] Add semi-lagrangian tracer transport for theta-l (F90 and C++), add new algorithm for finding tropopause, add DSCREAM to allow v2 and SCREAM settings in same code such as adjust_ps [EAM-MMF] 60L default, allow C++ back end of RRTMGP (EAM too). [EAMxx] add nu-top functionality, fix forcing functor, add ttype9 and dcmip2012 tests 2.1, 2.2, and 3 HOMME: remove obsolete remap algs, option to specify dynamics alg indep of tracer, new sponge layer, add imex tests [ELM] Add topography-based subgrid (topounits), add FATES-ELM Nitro., Phos. and CH4 coupling, add land-use ts for NARRM, add lulc for SSP3 RCP7, Fix nutrient fertilization exp test and carbon isotope flux, Fix xactive lnd dry deposition, add lake water storage option, fix plant hydraulics 2d params, fix carbon budget calc, fix soil nutrient conc. bug, fix mosart dam bug, add test for new ELM, MOSART features, fix bug in O3 dry dep stomatal resistances, fix plant hydraulics restart BFB error, update mkmapdata. [MOSART] fix bug for reading the latitude from an unstructured input file, fix oversat in bubble test. [MPAS-ocean] Add CFC11, CFC12 tracers, add 2D spherical transport tests, fix del4 tracer mixing, add MARBL ocean tracer mixing, modify harmonic analysis options, add GPU port of vmix routines, fix calc of ML-averaged BV freq. [MPAS-seaice] Change extents of initial polar disks for oRRS18to6v3 grid, fix ice BGC with MARBL, update spherical test cases, fix DON coupling, Remove Cf from sea ice constants. [MPAS-landice] add CRYO1850-4xCO2 compset [CIME] add GCP, ANL GCE, Spock, Perlmutter, deprecate config_compilers.xml, fix and clean-up cmake macros, fix slurm bindings, refactor CIME internal testing, cleanup SCORPIO perf data, allow position independent compset naming, [also] update v2 benchmarking suite, extend e3sm_prod with throughput and memory checks

E3SM Project, DOE↗
DOE OSTI2023

Computational model development and validation of fuel dispersal phenomena

As the US nuclear industry is renewing efforts to extend the rod average burnup limits in existing pressurized water reactors, it becomes imperative to investigate the safety implications associated with high burnup fuel fragmentation and the potential dispersal of fragmented fuel into the reactor coolant system. Additionally, as there is a growing interest in transitioning to new nuclear fuel designs to accommodate higher fuel burnup levels, it becomes essential to conduct studies on fuel behavior during design basis accident scenarios, particularly during a postulated loss-of-coolant accident, in order to ensure the safe operation of light-water reactors. The present study develops a computational model to simulate the complex three-phase flow of the fuel dispersal phenomena that occur following a breach in the cladding, when the stream of solid fuel particles and carrier fission gas stream may interact with the surrounding liquid medium. Furthermore, the proposed framework considers the solid phase as discrete Lagrangian particles while the interpenetrating gas–liquid continuum is modeled using a Eulerian framework. The developed simulation framework is validated with experimental results performed in a separate-effect test facility by comparing predicted particle settlement locations with the experimental observations reported in the literature. Key highlights of this study include the interpretation of the high-pressure boundary conditions and the three-phase flow coupling strategy. Also discussed are the gas–liquid hydrodynamics and the behavior of particles as they are transported through the gas and liquid phases.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗