Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effective temperature model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Studies of hot B subdwarfs. II - Energy distributions of three bright sdB/sdOB stars in the 950-5500 A range

Voyager ultraviolet spectrometer observations of the subdwarf B or OB stars HD 205805, UV 1758+36 and Feige 66 are presented. All three objects display the H I Layman series in absorption. These observations are combined with low dispersion IUE spectrophotometry and with Stromgren photometry to construct virtually complete energy distributions, which extend over the range 950-5500 angstroms. Effective temperatures based on model atmosphere calculations for high gravity, hygrogen rich stars are determined. Our analyses yield T sub e 28,200 + or - 1300 K for HD 205805, T sub e 31, 800 + or - 1100 K for UV 1758+36, and T sub e 35,700 + or 1500 K for Feige 66. The importance of far ultraviolet observations below L sub alpha in reducing the uncertainties associated with the interstellar extinction and the degradation of the IUE sensitivity is emphasized.

Wesemael, F.↗

Synthetic spectra of cool stars for the wavelength range 2550-3200 A

In order to interpret the ultraviolet spectra of cool stars obtained with IUE and to determine the physical conditions in their outer atmospheres, synthetic IUE spectra of stars cooler than the Sun, mainly the Sun and the metal-deficient, carbon-rich CH stars were calculated. Results are encouraging. Synthetic spectra for the Sun over the range 2550 to 3300 A give roughly the observed level of overall emission and relative strengths or various absorption features (Fe II, Mg II, Mg I, and Fe I) although they still require extra sources of continuous opacity longward of 2650 A. Spectra of the CH stars have roughly the correct shape in the ultraviolet continuum for the expected effective temperature, although these models are problematic in that the electron density, hence H(-) opacity, is directly proportional to the Mg-Si-Fe density and the ratio of line to continuum opacity is only slightly affected by changing metallicity.

Eaton, Joel A.↗

1987 Annual Conference on Nuclear and Space Radiation Effects, Snowmass Village, CO, July 28-31, 1987, Proceedings

Various papers on nuclear and space radiation effects are presented. The general topics addressed include: basic mechanisms of radiation effects, single-event phenomena, temperature and field effects, modeling and characterization of radiation effects, IC radiation effects and hardening, and EMP/SGEMP/IEMP phenomena. Also considered are: dosimetry/energy-dependent effects, sensors in and for radiation environments, spacecraft charging and space radiation effects, radiation effects and devices, radiation effects on isolation technologies, and hardness assurance and testing techniques.

Source record↗

Natural hydrocarbons, urbanization, and urban ozone

The combined effects of emission control and urbanization, with its concomitant intensification of the urban heat island, on urban ozone concentrations are studied. The effect of temperature on ozone is considered, and attention is given to the temperature effect on ozone photochemistry. Model calculations suggest that ozone concentration enhancements are caused by the effect of temperature on the atmospheric chemistry of peroxyacetyl nitrate, as well as the temperature dependence of natural and anthropogenic hydrocarbon emissions. It is pointed out that, because of the sensitivity of urban ozone to local climatic conditions and the ability of trees to moderate summertime temperatures, the inadvertent removal of trees from urbanization can have an adverse effect on urban ozone concentration, while a temperature increase in the urban heat island caused by urbanization can essentially cancel out the ozone-reducing benefits obtained from a 50-percent reduction in anthropogenic hydrocarbon emissions.

Cardelino, C. A.↗

Chandra X-Ray Observatory Observations of the Globular Cluster M28 and its Millisecond Pulsar PSR B1821-24

We report here the results of the first Chandra X-Ray Observatory observations of the globular cluster M28 (NGC 6626). We detect 46 X-ray sources of which 12 lie within one core radius of the center. We show that the apparently extended X-ray core emission seen with the ROSAT HRI is due to the superposition of multiple discrete sources for which we determine the X-ray luminosity function down to a limit of about 6 x 10(exp 30) erg/s. We measure the radial distribution of the X-ray sources and fit it to a King profile finding a core radius of r(sub c,x) approx. 11 sec. We obtain the best-fit mass of the X-ray sources to be M(sub x) approx. 1.9 solar masses. We measure for the first time the unconfused phase-averaged X-ray spectrum of the 3.05-ms pulsar B1821-24 and find it best described by a power law with photon-index Gamma approx. equal to 1.2. We find marginal evidence of an emission line centered at 3.3 kev in the pulsar spectrum, which could be interpreted as cyclotron emission from a corona above the pulsar's polar cap if the the magnetic field is strongly different from a centered dipole. The unabsorbed pulsar flux in the 0.5-8.0 keV band is approx. 3.5 x 10(exp -13) ergs/s/sq cm. We present spectral analyses of the 5 brightest unidentified sources. Based on the spectral parameters of the brightest of these sources, we suggest that it is a transiently accreting neutron star in a low-mass X-ray binary, in quiescence. Fitting its spectrum with a hydrogen neutron star atmosphere model yields the effective temperature T(sup infinity)(sub eff) = 90(sup +30)(sub -10) eV and the radius R(sup infinity)(sub NS) = 14.5(sup +6.9)(sub -3.8) km. In addition to the resolved sources, we detect fainter, unresolved X-ray emission from the central core. Using the Chandra-derived positions, we also present a preliminary report on the result of searching archival Hubble Space Telescope data for possible optical counterparts.

Becker, Werner↗

Chandra X-Ray Observatory Observations of the Globular Cluster M28 and its Milisecond Pulsar PSR B1821-24

We report here the results of the first Chandra X-Ray Observatory observations of the globular cluster M28 (NGC 6626). We detect 46 X-ray sources, of which 12 lie within 1 core radius of the center. We show that the apparently extended X-ray core emission seen with the ROSAT HRI is due to the superposition of multiple discrete sources, for which we determine the X-ray luminosity function down to a limit of about 6 x 10(exp 30) ergs/s. We measure the radial distribution of the X-ray sources and fit it to a King profile finding a core radius of r(sub c,X) approx. = 5 11". We measure for the first time the unconfused phase-averaged X-ray spectrum of the 3.05 ms pulsar B1821-24 and find that it is best described by a power law with photon index Gamma approx. = 1.2. We find marginal evidence of an emission line centered at 3.3 keV in the pulsar spectrum, which could be interpreted as cyclotron emission from a corona above the pulsar s polar cap if the magnetic field is strongly different from a centered dipole. The unabsorbed pulsar flux in the 0.1 - 8.0 keV band is approx. = 3.5 x 10(exp -13) ergs/s sq cm. We present spectral analyses of the five brightest unidentified sources. Based on the spectral parameters of the brightest of these sources, we suggest that it is a transiently accreting neutron star in a low-mass X-ray binary, in quiescence. Fitting its spectrum with a hydrogen neutron star atmosphere model yields the effective temperature T(sub eff, sup infinity) = 90(sup +30, sub -10) eV and the radius R(sub NS, sup infinity) = 14.5(sup +6.9, sub -3.8) km. In addition to the resolved sources, we detect fainter, unresolved X-ray emission from the central core. Using the Chandra-derived positions, we also report on the result of searching archival Hubble Space Telescope data for possible optical counterparts.

Becker, Werner↗

Multi-Node Modeling of Cryogenic Tank Pressurization System Using Generalized Fluid System Simulation Program

Cryogenic Tanks are pressurized by inert gas such as Helium or Nitrogen to maintain the required pressure of the propellant delivered to the turbo-pump of a liquid rocket engine. Thermo-fluid system simulation tools are used to analyze the pressurization process of a cryogenic tank. Most system level codes (GFSSP and ROCETS) use single node1 to represent ullage which is the gaseous space in the tank. Ullage space in a cryogenic tank is highly stratified because the entering inert gas is at ambient temperature whereas the liquid propellant is at a cryogenic temperature. A single node model does not account for the effect of temperature gradient in the ullage. High fidelity Navier-Stokes based CFD model of Tank Pressurization is not practical for running a long duration transient model with thousands and millions of nodes. A possible recourse is to construct a multi-node model with system level code that can account for ullage stratification.

Bandyopadhyay, Alak↗

Transequatorial effects of sea-surface temperature anomalies in a global general circulation model

An effort is made to describe the development of the model atmosphere's response to the sea-surface temperature (SST) anomalies in terms of their effect on the pole-to-pole meridional profile of the zonal mean 600-mb surface, which represents approximately the middle level of the model. The initial effect of a positive SST anomaly located in extratropical latitudes of the Pacific Ocean is found to be an inflation of the isobaric surfaces, relative to a control run, within the latitude band of the warm pool. In experiments with a North Pacific warm pool, the inflation continued for about 3 weeks in both winter and summer.

Spar, J.↗

Simulating the moderating effect of a lake on downwind temperatures

A steady-state, two-dimensional numerical model is used to simulate air temperatures and humidity downwind of a lake at night. Thermal effects of the lake were modelled for the case of moderate and low surface winds under the cold-air advective conditions that occur following the passage of a cold front. Surface temperatures were found to be in good agreement with observations. A comparison of model results with thermal imagery indicated the model successfully predicts the downwind distance for which thermal effects due to the lake are significant.

Bill, R. G., Jr.↗

A grid of model atmospheres for metal-deficient giant stars. I

A grid of flux-constant model atmospheres for stars with effective temperatures between 3750 and 6000 K, log g between 0.75 and 3.0, and (A/H) between -3.0 and 0.0 has been constructed. The line absorption is approximated by opacity distribution functions. Metal lines and molecular lines, including those from the infrared bands of CO and CN, are taken into account. The variation of the structure of the models with metal abundance and microturbulence parameter is found to be quite regular and not very drastic. The surface cooling produced by CO is important for all the models with a maximum temperature of 5000 K, while CN mainly causes a backwarming effect but is not very important for solar CNO abundances. The effects of convection, estimated by using the mixing-length approximation, are important only for the coldest models. The models compare very well with models from overlapping regions of other grids. A solar model consistent with the grid models is found to agree satisfactorily with empirical solar model atmospheres. The careful use of scaled solar models for stars with (A/H) approximately equal to zero is justified.

Gustafsson, B.↗

Grain formation around carbon stars. 1: Stationary outflow models

Asymptotic giant branch (AGB) stars are known to be sites of dust formation and undergo significant mass loss. The outflow is believed to be driven by radiation pressure on grains and momentum coupling between the grains and gas. While the physics of shell dynamics and grain formation are closely coupled, most previous models of circumstellar shells have treated the problem separately. Studies of shell dynamics typically assume the existence of grains needed to drive the outflow, while most grain formation models assume a constant veolcity wind in which grains form. Furthermore, models of grain formation have relied primarily on classical nucleation theory instead of using a more realistic approach based on chemical kinetics. To model grain formation in carbon-rich AGB stars, we have coupled the kinetic equations governing small cluster growth to moment equations which determine the growth of large particles. Phenomenological models assuming stationary outflow are presented to demonstrate the differences between the classical nucleation approach and the kinetic equation method. It is found that classical nucleation theory predicts nucleation at a lower supersaturation ratio than is predicted by the kinetic equations, resulting in significant differences in grain properties. Coagulation of clusters larger than monomers is unimportant for grain formation in high mass-loss models but becomes more important to grain growth in low mass-loss situations. The properties of the dust grains are altered considerably if differential drift velocities are ignored in modeling grain formation. The effect of stellar temperature, stellar luminosity, and different outflow velocities are investigated. The models indicate that changing the stellar temperature while keeping the stellar luminosity constant has little effect on the physical parameters of the dust shell formed. Increasing the stellar luminosity while keeping the stellar temperature constant results in large differences in grain properties. For small outflow velocities, grains form at lower supersaturation ratios and close to the stellar photosphere, resulting in larger but fewer grains. The reverse is true when grains form under high outflow velocities, i.e., they form at higher supersaturation ratios, farther from the star, and are much smaller but at larger quantities.

Egan, Michael P.↗

Numerical simulation of the atmospheric response to equatorial Pacific sea surface temperature anomalies

There exists observational and modeling evidence to the effect that sea surface temperature (SST) anomalies in the equatorial Pacific have a significant effect upon wintertime climate in the Pacific/North American sector of the hemisphere. In connection with the emergence of a more definitive observational basis for designing general circulation model (GCM) experiments to investigate the atmospheric response to equatorial SST anomalies, it was recommended to conduct a series of GCM experiments. The present study involves a series of extended (1-2 month) integrations.Attention is given to a review of previous GCM experiments, the plan for the present study, the general circulation model and its simulation of the winter and summer circulation described by Shukla et al. (1981), tropical precipitation, upper level flow, low-level circulation and temperature, and the tropical tropospheric temperature.

Shukla, J.↗

A new method for determining temperature and emission measure during solar flares from light curves of soft X-ray line fluxes

A method for using the shapes of the light curves of soft X-ray line fluxes observed during the decay phase of solar flares to infer the temperature and emission measure with time is described. Light curves of the November 5, 1980 flare and several additional flares that exhibit breaks are presented, and possible causes for these breaks are discussed. Numerical models that incorporate the effects of temperature changes on the emissivity function are examined, and the model calculations are compared with the line fluxes observed during the November 5, 1980 flare. The model results are used to derive other properties of the flare.

Bornmann, P. L.↗

Development of mathematical models of environmental physiology

Selected articles concerned with mathematical or simulation models of human thermoregulation are presented. The articles presented include: (1) development and use of simulation models in medicine, (2) model of cardio-vascular adjustments during exercise, (3) effective temperature scale based on simple model of human physiological regulatory response, (4) behavioral approach to thermoregulatory set point during exercise, and (5) importance of skin temperature in sweat regulation.

Stolwijk, J. A. J.↗

Heat Transfer Analysis in Wire Bundles for Aerospace Vehicles

Design of wiring for aerospace vehicles relies on an understanding of "ampacity" which refers to the current carrying capacity of wires, either, individually or in wire bundles. Designers rely on standards to derate allowable current flow to prevent exceedance of wire temperature limits due to resistive heat dissipation within the wires or wire bundles. These standards often add considerable margin and are based on empirical data. Commercial providers are taking an aggressive approach to wire sizing which challenges the conventional wisdom of the established standards. Thermal modelling of wire bundles may offer significant mass reduction in a system if the technique can be generalized to produce reliable temperature predictions for arbitrary bundle configurations. Thermal analysis has been applied to the problem of wire bundles wherein any or all of the wires within the bundle may carry current. Wire bundles present analytical challenges because the heat transfer path from conductors internal to the bundle is tortuous, relying on internal radiation and thermal interface conductance to move the heat from within the bundle to the external jacket where it can be carried away by convective and radiative heat transfer. The problem is further complicated by the dependence of wire electrical resistivity on temperature. Reduced heat transfer out of the bundle leads to higher conductor temperatures and, hence, increased resistive heat dissipation. Development of a generalized wire bundle thermal model is presented and compared with test data. The steady state heat balance for a single wire is derived and extended to the bundle configuration. The generalized model includes the effects of temperature varying resistance, internal radiation and thermal interface conductance, external radiation and temperature varying convective relief from the free surface. The sensitivity of the response to uncertainties in key model parameters is explored using Monte Carlo analysis.

S L Rickman↗

Micromechanical Modeling of the Thermal Expansion of Graphite/copper Composites with Nonuniform Microstructure

Two micromechanical models were developed to investigate the thermal expansion of graphite/copper (Gr/Cu) composites. The models incorporate the effects of temperature-dependent material properties, matrix inelasticity, initial residual stresses due to processing history, and nonuniform fiber distribution. The first model is based on the multiple concentric cylinder geometry, with each cylinder treated as a two-phase composite with a characteristic fiber volume fractions. By altering the fiber volume fraction of the individual cylinders, unidirectional composites with radially nonuniform fiber distributions can be investigated using this model. The second model is based on the inelastic lamination theory. By varying the fiber content in the individual laminae, composites with nonuniform fiber distribution in the thickness direction can be investigated. In both models, the properties of the individual regions (cylinders or laminae) are calculated using the method of cells micromechanical model. Classical incremental plasticity theory is used to model the inelastic response of the copper matrix at the microlevel. The models were used to characterize the effects of nonuniform fiber distribution on the thermal expansion of Gr/Cu. These effects were compared to the effects of matrix plasticity, choice of stress-free temperature, and slight fiber misalignment. It was found that the radially nonuniform fiber distribution has little effect on the thermal expansion of Gr/Cu but could become significant for composites with large fiber-matrix transverse CTE and Young's modulus mismatch. The effect of nonuniform fiber distribution in the through-thickness direction of a laminate was more significant, but only approached that of the stress-free temperature for the most extreme cases that include large amounts of bending. Subsequent comparison with experimental thermal expansion data indicated the need for more accurate characterization of the graphite fiber thermomechanical properties. Correlation with cyclic data revealed the presence of a mechanism not considered in the developed models. The predicted response did, however, exhibit ratcheting behavior that has been observed experimentally in Gr/Cu. Finally, simulation of the actual fiber distribution of particular specimens had little effect on the predicted thermal expansion.

Bednarcyk, Brett A.↗

Spatial variations in the Jovian 20-micrometer flux

The 17-28 micron brightness temperature of the center of the disk of Jupiter is 136 plus or minus 4 K. Model calculations yield an effective temperature of 142 plus or minus 4 K at the center of the disk for a helium to hydrogen ratio He/H2 of 0. This corresponds to an effective temperature of the entire disk of 136 plus or minus 5 K. The NEB, SEB, and STeB are shown to emit an excess flux at 20 microns when compared to the neighboring zones. The hot belts were grey in color at the time of the observations and were the source of excess 5-micron flux as well (Keay et al. 1973). The relationships between 5- and 20-micron flux excesses and the cloud structures are discussed.

Murphy, R. E.↗