Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Earth orbit”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Protection of solar array blankets from attack by low earth orbital atomic oxygen

The ram impact of low earth orbital atomic oxygen causes oxidation of spacecraft materials including polymers such as polyimides. The rate of oxidation is sufficiently high to potentially compromise the long term durability of Kapton solar array blankets. Ion beam sputter deposited atomic oxygen protective coatings of aluminum oxide, silicon dioxide, and codeposited silicon dioxide with small amounts of polytetrafluoroethylene were evaluated both in RF plasma asher tests and in low earth orbit. Deposition techniques, mechanical properties, and atomic oxygen protection performance are presented.

Banks, Bruce A.↗
NASA NTRS1975

Mission Analysis Program for Solar Electric Propulsion (MAPSEP). Volume 1: Analytical manual for earth orbital MAPSEP

An introduction to the MAPSEP organization and a detailed analytical description of all models and algorithms are given. These include trajectory and error covariance propagation methods, orbit determination processes, thrust modeling, and trajectory correction (guidance) schemes. Earth orbital MAPSEP contains the capability of analyzing almost any currently projected low thrust mission from low earth orbit to super synchronous altitudes. Furthermore, MAPSEP is sufficiently flexible to incorporate extended dynamic models, alternate mission strategies, and almost any other system requirement imposed by the user. As in the interplanetary version, earth orbital MAPSEP represents a trade-off between precision modeling and computational speed consistent with defining necessary system requirements. It can be used in feasibility studies as well as in flight operational support. Pertinent operational constraints are available both implicitly and explicitly. However, the reader should be warned that because of program complexity, MAPSEP is only as good as the user and will quickly succumb to faulty user inputs.

Source record↗
NASA NTRS1992

A model to compare performance of space and ground network support of low-Earth orbiters

This article compares the downlink performance in a gross average sense between space and ground network support of low-Earth orbiters. The purpose is to assess what the demand for DSN support of future small, low-cost missions might be, if data storage for spacecraft becomes reliable enough and small enough to support the storage requirements needed to enable support only a fraction of the time. It is shown that the link advantage of the DSN over space reception in an average sense is enormous for low-Earth orbiters. The much shorter distances needed to communicate with the ground network more than make up for the speedup in data rate needed to compensate for the short contact times with the DSN that low-Earth orbiters have. The result is that more and more requests for DSN-only support of low-Earth orbiters can be expected.

Posner, E. C.↗
NASA NTRS1967

Earth orbital space station systems.

Manned earth orbital space station systems, noting ground fitted S-4B station for transitional and intermediate stations and space missions

Cogdill, T. J.↗
NASA NTRS1997

Compensation for Spherical Geometric and Absorption Effects on Lower Thermospheric Emission Intensities Derived from High Earth Orbit Images

Remote sensing of the atmosphere from high earth orbit is very attractive due to the large field of view obtained and a true global perspective. This viewpoint is complicated by earth curvature effects so that slant path enhancement and absorption effects, small from low earth orbit, become dominant even at small nadir view angles. The effect is further complicated by the large range of local times and solar zenith angles in a single image leading to a modulation of the image intensity by a significant portion of the diurnal height variation of the absorbing layer. The latter effect is significant in particular for mesospheric, stratospheric and auroral emissions due to their depth in the atmosphere. As a particular case, the emissions from atomic oxygen (130.4 and 135.6 nm) and molecular nitrogen (two LBH bands, LBHS from 140 to 160 nm and LBHL from 160 to 180 nm) as viewed from the Ultraviolet Imager (UVI) are examined. The LBH emissions are of particular interest since LBHS has significant 02 absorption while LBHL does not, In the case of auroral emissions this differential absorption, well examined in the nadir, gives information about the height of the emission and therefore the energy of the precipitating particles. Using simulations of the viewing geometry and images from the UVI we examine these effects and obtain correction factors to adjust to the nadir case with a significant improvement of the derived characteristic energy. There is a surprisingly large effect on the images from the 02 diurnal layer height changes. An empirical compensation to the nadir case is explored based on the local nadir and local zenith angles for each portion of the image. These compensations are demonstrated as applied to the above emissions in both auroral and dayglow images and compared to models. The extension of these findings to other instruments, emissions and spectral regions is examined.

Swift, W.↗
NASA NTRS1999

K-Band Phased Array Developed for Low- Earth-Orbit Satellite Communications

Future rapid deployment of low- and medium-Earth-orbit satellite constellations that will offer various narrow- to wide-band wireless communications services will require phased-array antennas that feature wide-angle and superagile electronic steering of one or more antenna beams. Antennas, which employ monolithic microwave integrated circuits (MMIC), are perfectly suited for this application. Under a cooperative agreement, an MMIC-based, K-band phased-array antenna is being developed with 50/50 cost sharing by the NASA Lewis Research Center and Raytheon Systems Company. The transmitting array, which will operate at 19 gigahertz (GHz), is a state-of-the-art design that features dual, independent, electronically steerable beam operation ( 42 ), a stand-alone thermal management, and a high-density tile architecture. This array can transmit 622 megabits per second (Mbps) in each beam from Earth orbit to small Earth terminals. The weight of the total array package is expected to be less than 8 lb. The tile integration technology (flip chip MMIC tile) chosen for this project represents a major advancement in phased-array engineering and holds much promise for reducing manufacturing costs.

Anzic, Godfrey↗
NASA NTRS2017

Effects of CubeSat Deployments in Low-Earth Orbit

Long-term models, such as NASA's LEGEND (LEO (Low-Earth Orbit)-to-GEO (Geosynchrous Earth Orbit) Environment Debris) model, are used to make predictions about how space activities will affect the long-term evolution of the debris environment. Part of this process is to predict how spacecraft and rocket bodies will be launched and left in the environment in the future. This has usually been accomplished by repeating past launch history to simulate future launches. It was partially upon the basis of the results of such models that both national and international orbital debris mitigation guidelines - especially the "25-year rule" for post-mission disposal - were determined. The proliferation of Cubesat launches in recent years, however, has raised concerns that we are seeing a fundamental shift in how humans launch satellites into space that may alter the assumptions upon which our current mitigation guidelines are based. The large number of Cubesats, and their short lifetime and general inability to perform collision avoidance, potentially makes them an important new source of debris. The NASA Orbital Debris Program Office (ODPO) has conducted a series of LEGEND computations to investigate the long-term effects of adding Cubesats to the environment. Several possible future scenarios were simulated to investigate the effects of the size of future Cubesat launches and the efficiency of post-mission disposal on the proliferation of catastrophic collisions over the next 200 years. These results are compared to a baseline "business-as-usual" scenario where launches are assumed to continue as in the past without major Cubesat deployments. Using these results, we make observations about the continued use of the 25-year rule and the importance of the universal application of post-mission disposal. We also discuss how the proliferation of Cubesats may affect satellite traffic at lower altitudes.

Matney, M. J.↗
NASA NTRS2021

Aerocapture Trajectories for Earth Orbit Technology Demonstration and Orbiter Science Missions at Venus, Earth, Mars, and Neptune

The use of aerocapture to provide the delta-V needed to capture a spacecraft into orbit can provide significant fuel savings compared to a propulsive orbit insertion. The aerocapture guidance method described in this paper uses drag modulation, which deploys a drag skirt in the atmosphere until the amount of delta-V needed to capture into the desired orbit is obtained, at which time the drag skirt is separated from the spacecraft. By modulating the time of drag skirt jettison, the vehicle can target a specific orbit apoapsis in the presence of uncertainties such as entry targeting errors and unknown atmospheric conditions.

Jadusingh, Matt↗
NASA NTRS2002

Thin-Film Solar Array Earth Orbit Mission Applicability Assessment

This is a preliminary assessment of the applicability and spacecraft-level impact of using very lightweight thin-film solar arrays with relatively large deployed areas for representative Earth orbiting missions. The most and least attractive features of thin-film solar arrays are briefly discussed. A simple calculation is then presented illustrating that from a solar array alone mass perspective, larger arrays with less efficient but lighter thin-film solar cells can weigh less than smaller arrays with more efficient but heavier crystalline cells. However, a proper spacecraft-level systems assessment must take into account the additional mass associated with solar array deployed area: the propellant needed to desaturate the momentum accumulated from area-related disturbance torques and to perform aerodynamic drag makeup reboost. The results for such an assessment are presented for a representative low Earth orbit (LEO) mission, as a function of altitude and mission life, and a geostationary Earth orbit (GEO) mission. Discussion of the results includes a list of specific mission types most likely to benefit from using thin-film arrays. NASA Glenn's low-temperature approach to depositing thin-film cells on lightweight, flexible plastic substrates is also briefly discussed to provide a perspective on one approach to achieving this enabling technology. The paper concludes with a list of issues to be addressed prior to use of thin-film solar arrays in space and the observation that with their unique characteristics, very lightweight arrays using efficient, thin-film cells on flexible substrates may become the best array option for a subset of Earth orbiting missions.

Hoffman, David J.↗
NASA NTRS1991

System simulation on advanced earth-orbital satellite systems

A system simulation capability for advanced earth-orbital satellite systems (AEUSS) is presented. It is based on analytical assessment capabilities formulated for generic satellite systems in earth-orbital missions. The resulting AEOSS is a custom tailored software coded within the framework of the Macintosh version of the Acius relational database program, 4th Dimension. It projects the required power, weight, and cost for a satellite system. These key elements are computed on the component and subsystem levels, and then the system level. Selected performance analyses for essential components and subsystems are included.

Lee, Hwa-Ping↗
NASA NTRS1987

The 1986 DA and 1986 EB: M-class asteroids in near-Earth orbits

The Earth-approaching asteroid population is composed of asteroids in orbits with short lifetimes compared with the age of the solar system. These objects which are comprised of Aten, Apollo, and Amor asteroids must be replenished from either cometary or mainbelt asteroid sources since lifetimes against collision with or ejection by a planet are on the order of 10 to 100 million years. The physical study of Earth-approaching asteroids is constrained by the generally long period between favorable apparitions and poorly known orbits. Broadband spectrophotometry on the Johnson UBVR system and the Eight-Color Asteroid Survey system were obtained at Kitt Peak National Observatory and on the Johnson JHK system and at 10 and 20 microns at the NASA Infrared Telescope Facility at Mauna Kea Observatory. These observations were used to determine the absolute visual magnitudes and to derive the visual geometric albedos and diameters on the IRAS system. The spectral reflectance properties and geometric albedos of the M-class asteroids are consistent compositions analogous to the iron nickel meteorites or the enstatite-metal assemblages of the enstatite chondrites. The issue of the source(s) of the near-Earth asteroids population was examined by comparing the classifications on the scheme employed by Gradie and Tedesco of 38 such asteroids. Most of the near-Earth objects is indeed the asteroid belt as the observations suggest, then a method for removing extinct nuclei of short period comets must be found since the rate of production of short period comets from the long period comets is relatively large.

Gradie, Jonathan↗
NASA NTRS1996

Spacecraft Autonomous Navigation for Formation Flying Earth Orbiters Using GPS

This paper extends earlier analysis for autonomous orbit determination and control of Earth orbiting spacecraft. The earlier analysis was limited to a single spacecraft with a ground track repeat requirement. This work shows that a similar technique is applicable for two spacecraft flying in formation. Tracking and orbit determination functions are performed using the Global Positioning System (GPS).

spacecraft↗
NASA NTRS2000

Autonomous Navigation Improvements for High-Earth Orbiters Using GPS

The Goddard Space Flight Center is currently developing autonomous navigation systems for satellites in high-Earth orbits where acquisition of the GPS signals is severely limited This paper discusses autonomous navigation improvements for high-Earth orbiters and assesses projected navigation performance for these satellites using Global Positioning System (GPS) Standard Positioning Service (SPS) measurements. Navigation performance is evaluated as a function of signal acquisition threshold, measurement errors, and dynamic modeling errors using realistic GPS signal strength and user antenna models. These analyses indicate that an autonomous navigation position accuracy of better than 30 meters root-mean-square (RMS) can be achieved for high-Earth orbiting satellites using a GPS receiver with a very stable oscillator. This accuracy improves to better than 15 meters RMS if the GPS receiver's signal acquisition threshold can be reduced by 5 dB-Hertz to track weaker signals.

Long, Anne↗
NASA NTRS2016

Application of X-Ray Pulsar Navigation: A Characterization of the Earth Orbit Trade Space

The potential for pulsars as a navigation source has been studied since their discovery in 1967. X-ray pulsar navigation (XNAV) is a celestial navigation system that uses the consistent timing nature of x-ray photons from milli-second pulsars (MSP) to perform space navigation. By comparing the detected arrival of x-ray photons to a reference database of expected pulsar lightcurve timing models, one can infer a range and range rate measurement based on light time delay. Much of the challenge of XNAV comes from the faint signal, availability, and distant nature of pulsars. This is a study of potential pulsar XNAV measurements to measure extended Kalman filter (EKF) tracking performance with a wide trade space of bounded Earth orbits, using a simulation of existing x-ray detector space hardware. An example of an x-ray detector for XNAV is the NASA Station Explorer for X-ray Timing and Navigation (SEXTANT) mission, a technology demonstration of XNAV set to perform on the International Space Station (ISS) in late 2016early 2017. XNAV hardware implementation is driven by trajectory and environmental influences which add noise to the x-ray pulse signal. In a closed Earth orbit, the radiation environment can exponentially increase the signal noise from x-ray pulsar sources, decreasing the quality and frequency of measurements. The SEXTANT mission in particular improves on the signal to noise ratio by focusing an array of 56 x-ray silicon drift detectors at one pulsar target at a time. This reduces timing glitches and other timing noise contributions from ambient x-ray sources to within a 100 nanosecond resolution. This study also considers the SEXTANT scheduling challenges inherent in a single target observation. Finally, as the navigation sources are now relatively inertial targets, XNAV measurements are also subject to periods of occultation from various celestial bodies. This study focuses on the characterization of these drivers in closed Earth orbits and is not a tuning analysis of the EKF. The study shows that the closed Earth orbit for XNAV performance is reliant on the orbit semi-major axis and eccentricity as well as orbit inclination. These parameters are the primary drivers of pulsar measurement availability and significantly influence the natural spacecraft orbit dynamics. Sensitivity to initial orbit determination error growth due to the scarcity of XNAV measurements within an orbital period require appropriate timing of initial XNAV measurements. The orbit angles of argument of perigee and right ascension of the ascending node, alongside the other orbit parameters, complete the initial cadence of XNAV measurements. The performance of initial XNAV measurements then propagates throughout the experimental period. The study provides a basis to missions who wish to consider XNAV as a potential navigation source in a closed Earth orbit design. It provides a family of orbit trajectories as well as other modeling considerations needed to effectively evaluate if XNAV is an effective navigation source for a potential mission. As an EKF is sensitive to a linearized estimated state, this study has a direct benefit of providing effective XNAV measurements to maintain spacecraft tracking, independent of other navigation sources. In the particular use case of the SEXTANT mission, it also provides a novel scheduling algorithm which addresses the need to prioritize and manage pulsar observations for effective navigation.

PULSAR↗