Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EV RANGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Extraction characteristics of a low-energy ion beam system with a remote plasma chamber

Low-energy argon beams were extracted from a dual-chamber ion source system. The first chamber is a quartz cylinder where dense inductively coupled plasmas were produced using 13.56 MHz radio frequency (rf) power. The discharge was driven into an adjacent chamber which acts as a reservoir for ion beam extraction using a dual-electrode extractor configuration. Extraction of ions from the second chamber with energies in the 100 eV range was achieved while minimizing fluctuations induced by the rf signal. A custom-built retarding potential analyzer was used to analyze the effectiveness of ion beam transport using the remote plasma chamber. Well-defined beams were extracted between 60 and 100 V extraction potentials at 50–100 W rf powers. An increase in rf power resulted in an increase in average ion energy, increase in ion current density while the energy spread remains constant.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Progress in Beam Focusing and Compression for Target Heating and Warm Dense Matter Experiments

The Heavy-Ion Fusion Sciences Virtual National Laboratory is pursuing an approach to target heating experiments in the warm dense matter regime, using space-charge-dominated ion beams that are simultaneously longitudinally bunched and transversely focused. Longitudinal beam compression by large factors has been demonstrated in the Neutralized Drift Compression Experiment (NDCX) with controlled ramps and forced neutralization. Using an injected 30 mA K{sup +} ion beam with initial kinetic energy 0.3 MeV, axial compression leading to {approx}50X current amplification and simultaneous radial focusing to a few mm have led to encouraging energy deposition approaching the intensities required for eV-range target heating experiments. We discuss the status of several improvements to NDCX to reach the necessary higher beam intensities, including: beam diagnostics, greater axial compression via a longer velocity ramp; and plasma injection improvements to establish a plasma density always greater than the beam density, expected to be > 10{sup 13} cm{sup -3}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Localized Excitons in the Spectrum of Optical Absorption of Zinc Oxide Doped with Manganese

The results of the study of optical absorption and EPR signals of single crystals of zinc oxide doped with manganese are presented. A broad impurity absorption band with the threshold energy about 2.1 eV, which was treated as a result of charge transfer transitions, has been observed for a long time in ZnO : Mn absorption spectra. In absorption spectra of a polarized light at 4.2 and 77.3 K, we first detected several lines of different intensity in a 1.877–1.936 eV range of energies of the light quanta. The observed lines are attributed to a donor exciton [(d{sup 5} + h)e] that emerges as a result of the Coulomb binding a free s electron and a hole, which is localized on p–d hybridized states. The EPR spectra of Mn{sup 2+} ion signals, when corresponding to the impurity absorption band exposed to light, are found to be not photosensitive. The obtained results indicate that the ZnO : Mn impurity absorption is due to transitions from antibonding p–d hybridized DBH states to the conduction band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron Resonance Transmission Analysis (NRTA): Initial Studies of a Method for Assaying Plutonium in Spent Fuel

Neutron Resonance Transmission Analysis (NRTA) is an analytical technique that uses neutrons to assay the isotopic content of bulk materials. The technique uses a pulsed accelerator to produce an intense, short pulse of neutrons in a time-of-flight configuration. These neutrons, traveling at different speeds according to their energy, can be used to interrogate a spent fuel (SF) assembly to determine its plutonium content. Neutron transmission through the assembly is monitored as a function of neutron energy (time after the pulse), similar to the way neutron cross-section data is often collected. The transmitted neutron intensity is recorded as a function of time, with faster (higher-energy) neutrons arriving first and slower (lower-energy) neutrons arriving later. The low-energy elastic scattering and absorption resonances of plutonium and other isotopes modulate the transmitted neutron spectrum. Plutonium content in SF can be determined by analyzing this attenuation. Work is currently underway at Idaho National Laboratory, as a part of United States Department of Energy's Next Generation Safeguards Initiative (NGSI), to investigate the NRTA technique and to assess its feasibility for quantifying the plutonium content in SF and for determining the diversion of SF pins from assemblies. Preliminary results indicate that NRTA has great potential for being able to assay intact SF assemblies. Operating in the 1-40 eV range, it can identify four plutonium isotopes (239, 240, 241, & 242Pu), three uranium isotopes (235, 236, & 238U), and six resonant fission products (99Tc, 103Rh, 131Xe, 133Cs, 145Nd, and 152Sm). It can determine the areal density or mass of these isotopes in single- or multiple-pin integral transmission scans. Further, multiple observables exist to allow the detection of material diversion (pin defects) including fast-neutron and x-ray radiography, gross-transmission neutron counting, plutonium resonance absorption analysis, and fission-product resonance absorption analysis. Initial benchmark modeling has shown excellent agreement with previously published experimental data for measurements of individual SF pins where plutonium assays were experimentally demonstrated to have a precision of better than 3%.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Intermediate-energy differential and integral cross sections for vibrational excitation in α-tetrahydrofurfuryl alcohol

Differential and integral cross section measurements, for incident electron energies in the 20–50 eV range, are reported for excitation of several composite vibrational modes in α-tetrahydrofurfuryl alcohol (THFA). Optimisation and frequency calculations, using GAUSSIAN 09 at the B3LYP/aug-cc-pVDZ level, were also undertaken for the two most abundant conformers of THFA, with results being reported for their respective mode classifications and excitation energies. Those calculations assisted us in the experimental assignments of the composite features observed in our measured energy loss spectra. There are, to the best of our knowledge, no other experimental or theoretical data currently available in the literature against which we can compare the present results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PROGRESS IN BEAM FOCUSING AND COMPRESSION FOR WARM-DENSE MATTER EXPERIMENTS

The Heavy-Ion Fusion Sciences Virtual National Laboratory is pursuing an approach to target heating experiments in the Warm Dense Matter regime, using spacecharge-dominated ion beams that are simultaneously longitudinally bunched and transversely focused. Longitudinal beam compression by large factors has beendemonstrated in the Neutralized Drift Compression Experiment (NDCX) with controlledramps and forced neutralization. Using an injected 30-mA K+ ion beam with initialkinetic energy 0.3 MeV, axial compression leading to ~;;50-fold current amplification andsimultaneous radial focusing to beam radii of a few mm have led to encouraging energy deposition approaching the intensities required for eV-range target heating experiments. We discuss the status of several improvements to our Neutralized Drift Compression Experiment and associated beam diagnostics that are under development to reach the necessary higher beam intensities, including: (1) greater axial compression via a longer velocity ramp using a new bunching module with approximately twice the available voltseconds; (2) improved centroid control via beam steering dipoles to mitigate aberrations in the bunching module; (3) time-dependent focusing elements to correct considerable chromatic aberrations; and (4) plasma injection improvements to establish a plasma density always greater than the beam density, expected to be>1013 cm-3.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterization of a New Lead Slowing Down Spectrometer

There is considerable interest in developing direct measurement methods to determine the plutonium content of spent nuclear fuel within a fuel assembly. One technique that may prove successful is lead slowing-down spectroscopy. Lead Slowing Down Spectroscopy (LSDS) has been used for decades to make cross-section measurements on relatively small isotopic samples of well know masses. For spent fuel assembly measurements, LSDS will be applied in reverse; unknown masses will be determined using well-know cross-sections. In the LSDS, a pulse of neutrons (on the order of 10-100 MeV) is injected into a large lead stack (~ 1m3). The neutrons quickly down-scatter but exhibit little spread in energy about the average, continually-decreasing neutron energy making for a strong correlation between the elapsed time from the initial pulse and the average energy of the neutron. By measuring this elapsed time, it is possible to measure interactions of the neutrons with the fuel in the 0.1 to 1,000 eV range. Many of the actinides have strong resonances in this region, making it possible, through careful measurements and analysis, to extract isotopic masses from LSDS measurements. Pacific Northwest National Laboratory is actively conducting research on both LSDS measurement and data analysis techniques. This paper will present results of the effort to construct and characterize a new lead slowing down spectrometer. The spectrometer was designed to begin testing both experimental measurement and data analysis techniques for determining the plutonium content of spent fuel. To characterize the spectrometer, a series of (n,γ) experiments were conducted to measure the correlation between the time after the neutrons enter the lead and the energy of the interaction. Results from these measurements as well as plans for future development of the spectrometer will be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

UV PHOTODESORPTION OF METHANOL IN PURE AND CO-RICH ICES: DESORPTION RATES OF THE INTACT MOLECULE AND OF THE PHOTOFRAGMENTS

Wavelength-dependent photodesorption rates have been determined using synchrotron radiation for condensed pure and mixed methanol ice in the 7–14 eV range. The VUV photodesorption of intact methanol molecules from pure methanol ices is found to be of the order of 10{sup −5} molecules/photon, that is two orders of magnitude below what is generally used in astrochemical models. This rate gets even lower (<10{sup −6} molecules/photon) when the methanol is mixed with CO molecules in the ices. This is consistent with a picture in which photodissociation and recombination processes are at the origin of intact methanol desorption from pure CH{sub 3}OH ices. Such low rates are explained by the fact that the overall photodesorption process is dominated by the desorption of the photofragments CO, CH{sub 3}, OH, H{sub 2}CO, and CH{sub 3}O/CH{sub 2}OH, whose photodesorption rates are given in this study. Our results suggest that the role of the photodesorption as a mechanism to explain the observed gas phase abundances of methanol in cold media is probably overestimated. Nevertheless, the photodesorption of radicals from methanol-rich ices may stand at the origin of the gas phase presence of radicals such as CH{sub 3}O, therefore, opening new gas phase chemical routes for the formation of complex molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compact FEL-driven inverse compton scattering gamma-ray source

Many research and applications areas require photon sources capable of producing gamma-ray beams in the multi-MeV energy range with reasonably high fluxes and compact footprints. Besides industrial, nuclear physics and security applications, a considerable interest comes from the possibility to assess the state of conservation of cultural assets like statues, columns etc., via visualization and analysis techniques using high energy photon beams. Computed Tomography scans, widely adopted in medicine at lower photon energies, presently provide high quality three-dimensional imaging in industry and museums. We explore the feasibility of a compact source of quasi-monochromatic, multi-MeV gamma-rays based on Inverse Compton Scattering (ICS) from a high intensity ultra-violet (UV) beam generated in a free-electron laser by the electron beam itself. This scheme introduces a stronger relationship between the energy of the scattered photons and that of the electron beam, resulting in a device much more compact than a classic ICS for a given scattered energy. As a result, the same electron beam is used to produce gamma-rays in the 10–20 MeV range and UV radiation in the 10–15 eV range, in a ~4 × 22 m 2 footprint system.

43 PARTICLE ACCELERATORS↗

Photoluminescence and Raman spectroscopy of wide bandgap semiconductors damaged by deep-UV laser irradiation

The effects of a pulsed, focused, deep-UV (4.66 eV) laser on wide and ultra-wide bandgap semiconductors were investigated with photoluminescence (PL) and Raman spectroscopy. Three semiconductor single crystals were studied: silicon carbide (6H-SiC), gallium nitride (GaN), and gallium oxide (β-Ga 2 O 3 ). Atomic emission lines from neutral Ga or Si were observed during the laser-damage process. For all three semiconductors, PL mapping (3.49 eV laser excitation) of the damaged material revealed visible emission bands in the 2.6–2.8 eV range, attributed to point defects. Raman spectra (2.33 eV excitation) showed a reduction in the Raman peak intensities in the damaged region, along with weak PL bands around 1.9–2.1 eV.

36 MATERIALS SCIENCE↗

U.S. Light-duty Vehicle Air Conditioning Fuel Use and the Impact of Four Solar/Thermal Control Technologies

The U.S. uses 7.6 billion gallons of fuel per year for vehicle air conditioning (A/C), equivalent to 5.7 percent of the total national light-duty vehicle (LDV) fuel use. This equates to 30 gallons/year per vehicle, or 23.5 grams (g) of carbon dioxide (CO2) per mile, for an average U.S. vehicle. A/C is a significant contribution to national fuel use; therefore, technologies that reduce A/C loads may reduce operational costs, A/C fuel use, and CO2 emissions. Since A/C is not operated during standard EPA fuel economy testing protocols, EPA provides off-cycle credits to encourage OEMs to implement advanced A/C technologies that reduce fuel use in the real world. NREL researchers assessed thermal/solar off-cycle credits available in the U.S. Environmental Protection Agency's (EPA's) Final Rule for Model Year 2017 and Later Light-Duty Vehicle Greenhouse Gas Emissions and Corporate Average Fuel Economy. Credits include glazings, solar reflective paint, and passive and active cabin ventilation. Implementing solar control glass reduced CO2 emissions by 2.0 g/mi, and solar reflective paint resulted in a reduction of 0.8 g/mi. Active and passive ventilation strategies only reduced emissions by 0.1 and 0.2 g/mi, respectively. The national-level analysis process is powerful and general; it can be used to determine the impact of a wide range of new vehicle thermal technologies on fuel use, EV range, and CO2 emissions.

30 DIRECT ENERGY CONVERSION↗

Spin-asymmetry function for elastic electron scattering from lead atoms in the energy range 11-14 eV

We report investigations of the spin-asymmetry function S{sub A} in elastic electron scattering from lead atoms. The experimental results are compared to previous measurements as well as to earlier and recent relativistic model-potential and R-matrix (close-coupling) calculations. The spin-asymmetry function is found to depend strongly on the incident-electron energy in the region between 11 and 14 eV.

74 ATOMIC AND MOLECULAR PHYSICS↗

Transmittance and optical constants of Eu films from 8.3 to 1400 eV

The optical constants of Eu films were obtained in the 8.3-1400 eV range from transmittance measurements performed at room temperature. Thin films of Eu were deposited by evaporation in ultrahigh vacuum conditions and their transmittance was measured in situ. Eu films were deposited onto grids coated with a thin C support film. The refractive index n of Eu was calculated using the Kramers-Kronig analysis. Data were extrapolated both on the high- and low-energy sides by using experimental and calculated extinction coefficient values available in the literature. Eu, similar to other lanthanides, has a low-absorption band just below the O{sub 2,3} edge onset; the lowest absorption was measured at about 16.7 eV. Therefore, Eu is a promising material for filters and multilayer coatings in the energy range below the O{sub 2,3} edge in which materials typically have a strong absorption. The consistency of the composite optical constants was tested with the f and inertial sum rules and found to be good.

36 MATERIALS SCIENCE↗

Polarization effects in low-energy e-CH4 collisions

Polarization effects on the cross sections for elastic scattering of electrons by the CH4 molecule, for collision energies from 7.5 down to 0.02 eV, are presently studied on the basis of Takatsuka and McKoy's (1981) Schwinger multichannel formulation. While the closed-channel expansion through which polarization effects are encompassed is not fully converged, the cross sections obtained nevertheless exhibit a Ramsauer-Townsend minimum in the 0.1-0.2 eV range; this is about 0.3 lower than the experimentally obtained value. At 7.5 eV, however, the calculated differential cross-sections are in excellent agreement with measured values.

Lima, M. A. P.↗

Photoelectron energy loss and spectral features deduced by the plasma line technique

Plasma line data gathered at the Arecibo Observatory are used to examine relative variations in topside F region differential photoelectron fluxes in the 5- to 20-eV range. A spectral feature not found in present theoretically calculated spectra is noted near 15 eV. A new approach to the interpretation of the measured spectra is taken, which allows a qualitative estimate of the relative importance of different energy loss mechanisms. The altitude variation of the observed photoelectron flux energy spectra at the higher altitudes (above 350 km) and the lower energies (less than 10 eV) agrees quantitatively with the expected variation of the spectrum.

Abreu, V. J.↗

Modeling magnetic confinement of laser-generated plasma in cylindrical geometry leading to disk-shaped structures

Radiation-magnetohydrodynamic simulations were able to reproduce features of the plasma structures observed in recent experiments1, where a laser was used to ablate plasma in a 3 MG magnetic field. The laser ablates the plasma, and localized structures are formed due to the inhibition of heat flow by the magnetic field. The large magnetic pressures cause the plasma to pinch. In an azimuthal fi eld, a disc-shaped plasma is generated. According to simulations, the disc has electron densities that are underdense to the laser, ranging from 10 18 to 10 19 cm -3 , and electron temperatures in the 300 to 1000 eV range during its evolution, similar to experimental data.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Connected and Learning Based Optimal Freight Management for Efficiency

The management of the future heterogenous fleet is a complex decision-making problem. The heterogenous fleet is emerging as decarbonization technologies are deployed by fleets toward lowering the freight operation emissions in Medium and Heavy-duty vehicles. Traditionally, in fleets characterized by a homogeneous Diesel Internal Combustion Engine (ICE) powertrain, the process of fleet planning and operational optimization unfolds sequentially without the necessity to account for powertrain and vehicle-specific characteristics during dispatch decisions. Fleets with trucks less than 5 years old tend to maintain stable vehicle efficiency with minimal operational reliability risks for fleet managers. However, the landscape changes with the incorporation of emerging powertrain technologies, which lack extensive operational data and service experiences. This includes technologies like hybrid, Electric, Fuel Cell, or alternative fuel ICE. Operational decisions for fleets featuring heterogeneous powertrain technologies and facing limited access to alternative fueling and charging stations become intricate, requiring careful consideration and optimization at each dispatch. The difference in efficiency characteristics of emerging technologies, their range limitations, and the restricted availability of charging/alternative fueling infrastructure, coupled with sensitivity to driving conditions (e.g., EV range reduction in low temperatures) and their impact on component aging (such as batteries), become pivotal factors influencing the reliable and efficient freight transportation. To make the path toward low emission freight transportation efficient and reliable, an AI-assisted fleet management software is developed in this project to help fleet managers in optimizing both adoption of emerging powertrain decarbonization, connected and automated technologies and also operating the fleet after such technologies are deployed as schematically. Freight transportation requirements are different depending on the cargos to be shipped, customer requirements and regions of operations. This further highlights the need for software and digital solutions to tailor deployment and operation of emerging powertrain, connectivity, and automation technologies toward the specific fleet operation requirements. The fleet management optimizer was also integrated with a model of the fleet to simulate the operation of the fleet over 1 year of the baseline fleet operation (250,000+ shipments) indicating the significance of day-to-day variations on emissions and energy consumption of a freight transportation fleet. The results demonstrate ≥20% improvement in freight efficiency in terms of WTW CO2 per ton-mile of cargo shipments while all fleet operation constraints are enforced, and the cost (CapEx and OpEx) is minimized.

33 ADVANCED PROPULSION SYSTEMS↗