Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ENG”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Structure, nanomechanics, and dynamics of dispersed surfactant‐free clay nanocomposite films

The current work presents a new approach to achieve high quality dispersion of surfactant‐free nanoclay tactoid particles in sub‐micron thin films despite the absence of organic modifier. Natural Montmorillonite particles, Cloisite, were dispersed in thin films of polycaprolactone (PCL) through a flow coating technique assisted by ultra‐sonication. Wide‐angle X‐ray scattering (WAXS), grazing‐incidence wide‐angle X‐ray scattering (GI‐WAXS), and transmission electron microscopy (TEM) were used to confirm the level of natural clay dispersion down to the level of tactoids (sub‐micron scale stacks of clay sheets). These characterization techniques were carried out in conjunction with an analysis of nanomechanical properties via strain‐induced buckling instability for modulus measurements (SIEBIMM), a high‐throughput technique to characterize thin film mechanical properties. The buckling patterns indicate that the natural clay tactoids separate buckling‐enhancing (high‐modulus) crystalline regions and interconnect buckling‐suppressing amorphous (low‐modulus) regions. Due to the tactoid length scale, the glass transition behavior of the composites as characterized by broadband dielectric relaxation spectroscopy was unmodified by the clay. Likewise, the glass transition temperature, T g , and fragility (slope of relaxation time behavior approaching T g ), remain unaffected, indicating that these dispersed tactoids do not induce pronounced confinement effects on dynamics. POLYM. ENG. SCI., 58:1285–1295, 2018. © 2018 Society of Plastics Engineers

Zhang, Xiao↗

A novel crystallization kinetics model of transcrystalline used for crystallization behavior simulation of short carbon fiber‐reinforced polymer composites

A combined model is presented to simulate the crystallization behavior of short carbon fiber‐reinforced polymer (SCFRP) composites in this work. The combined model accounts for two morphologies in SCFRP: transcrystalline and spherulite. Transcrystalline is affected by complicated processing conditions and fibers and significantly affects the performance of composites. The quantitative modeling of crystallization kinetics of transcrystalline is thus important in predicting the mechanical properties of the composites. Therefore, this work proposes a novel analytical crystallization kinetics model of transcrystalline for SCFRP. In the combined model, the crystallization kinetics of spherulites is calculated using a classic Kolmogorov model. The combined model for SCFRP is first validated using a pixel coloring method in a two‐dimensional (2D) simulation experiment and is then compared with the results of a differential scanning calorimeter (DSC) experiment. The results of the model and experiments (using pixel coloring method and DSC) were found to be in agreement, which proves the rationality of the combined model. The modeling results also show that transcrystalline can accelerate the crystallization rate of composites, and the acceleration effect is more remarkable at high temperature. The proposed crystallization kinetics model has good potential for modelling the crystallization behavior of SCFRP under complex processing conditions. POLYM. ENG. SCI., 59:854–862, 2019. © 2018 Society of Plastics Engineers

Fang, Haidong↗

Compact feature-aware Hermite-style high-order surface reconstruction

High-order surface reconstruction is now a commonly used technique for mesh generation and adaptation, geometric and physical modeling, and high-order numerical methods for solving partial differential equations (PDEs). However, surface reconstruction from a relatively coarse mesh remained a challenging problem, especially for surfaces with sharp features. Here in this paper, we introduce a new method to address this challenge by improving the previous state of the art, including continuous moving frames (CMF) and weighted averaging of local fittings (WALF) (Eng Comput 28 (2012)), in two aspects. First, we significantly improve the robustness of reconstruction from coarse meshes using a Hermite-style least squares approximation to incorporate normals of the surface and tangents of the feature curves. Second, we ensure both G 0 continuity and high-order accuracy of the reconstruction near sharp features by generating parametric surface elements with an iterative feature-aware parameterization. We present the theoretical framework of our method and compare it against point-based methods in terms of accuracy and stability. We demonstrate the use of the proposed technique in generating high-order meshes for finite element methods, and show that it enables nearly identical solutions as using the meshes generated from exact geometry, while allowing additional flexibility.

42 ENGINEERING↗

Circumventing mesh bias by r- and h-adaptive techniques for variational eigenfracture

This work introduces and compares mesh r- and h-adaptivity for the eigenfracture model originally proposed in Schmidt et al. (Multiscale Model Simul 7:1237–1266, 2009), Pandolfi and Ortiz (J Numer Methods Eng 92:694–714, 2012), with the goal of suppressing potential mesh bias due to the element deletion. In the r-adaptive approach, we compute the configurational force at each incremental step and move nodes near the crack tip parallel to the normalized configurational forces field such that the crack propagation direction can be captured more accurately within each incremental step. In the h-adapative approach, we introduce mesh refinement via a quad-tree algorithm to introduce more degrees of freedom within the nonlocal ϵ-neighborhood such that a more refined crack path can be reproduced with a higher mesh resolution. Our numerical examples indicate that the r-adaptive approach is able to replicate curved cracks and complex geometrical features, whereas the h-adaptive approach is advantageous in simulating sub-scale fracture when the nonlocal regions are smaller than the un-refined coarse mesh.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the convergence and convergence order of finite volume gradient schemes for oblique derivative boundary value problems

This work is an improvement of the previous note (Bradji in: Fuhrmann et al., Finite volumes for complex applications VII–methods, theoretical aspects. Proceedings of the FVCA 7, Berlin, 2014) which dealt with the convergence analysis of a finite volume scheme for the Poisson’s equation with a linear oblique derivative boundary condition. The formulation of the finite volume scheme given in Bradji (in: Fuhrmann et al., Finite volumes for complex applications VII–methods, theoretical aspects. Proceedings of the FVCA 7, Berlin, 2014) involves the discrete gradient introduced recently in Eymard et al. (IMA J Numer Anal 30(4):1009–1043, 2010). In this paper, we consider the convergence analysis of finite volume schemes involving the discrete gradient of Eymard et al. (IMA J Numer Anal 30(4):1009–1043, 2010) for elliptic and parabolic equations with linear oblique derivative boundary conditions. Linear oblique derivative boundary conditions arise for instance in the study of the motion of water in a canal, cf. Lesnic (Commun Numer Methods Eng 23(12):1071–1080, 2007). We derive error estimates in several norms which allow us to get error estimates for the approximations of the exact solutions and its first derivatives. In particular, we provide an error estimate between the gradient of the exact solutions and the discrete gradient of the approximate solutions. Convergence of the family of finite volume approximate solutions towards the exact solution under weak regularity assumption is also investigated. In the case of parabolic equations with oblique derivative boundary conditions, we develop a new discrete a priori estimate result. The proof of this result is based on the use of a discrete mean Poincaré–Wirtinger inequality. Thanks to the stated a priori estimate and to a comparison with an appropriately chosen auxiliary finite volume scheme, we derive the convergence results. This work can be viewed as a continuation of the previous work (Bradji and Gallouët in Int J Finite Vol 3(2):1–35, 2006) where a convergence analysis for a finite volume scheme, based on the admissible mesh of Eymard et al. (In: Ciarlet and Lions, Handbook of numerical analysis, North-Holland, Amsterdam, 2000), for the Poisson’s equation with a linear oblique derivative boundary conditions is given. The obtained convergence results do not require any relation between the mesh sizes of the spatial and time discretizations. Some numerical tests are presented for both elliptic and parabolic equations. In particular, we present three methods to compute the discrete solution.

97 MATHEMATICS AND COMPUTING↗

Verification of sub-grid filtered drag models for gas-particle fluidized beds with immersed cylinder arrays

The accuracy of coarse-grid multiphase CFD simulations of fluidized beds may be improved via the inclusion of filtered constitutive models. In our previous study (Sarkar et al., Chem. Eng. Sci., 104, 399-412), we developed such a set of filtered drag relationships for beds with immersed arrays of cooling tubes. Verification of these filtered drag models is addressed in this work. Predictions from coarse-grid simulations with the sub-grid filtered corrections are compared against accurate, highly-resolved simulations of full-scale turbulent and bubbling fluidized beds. The filtered drag models offer a computationally efficient yet accurate alternative for obtaining macroscopic predictions, but the spatial resolution of meso-scale clustering heterogeneities is sacrificed.

42 ENGINEERING↗

Virtual prototyping of liquid metal blanket performance in fusion pilot plant

Liquid metal blanket is a dominant design option for the next step fusion devices responsible for harvesting energy from fusion reaction, and simultaneously producing fuel for the same reaction through tritium breeding. Liquid metal blankets introduce additional complexity to the design due to fluid motion, fluid structure interaction, and magnetohydrodynamic (MHD) effects arising from the motion of the conducting fluid through the magnetic field. They are also directly affected by the plasma heat flux and neutronic fluence. PPPL is currently developing a virtual prototyping system for numerical analysis of the liquid metal blankets for future fusion devices. The system has a customized 3D computational fluid dynamics (CFD) code in its core, allowing MHD flow and conjugate heat transfer analysis in blankets fluids and solids. The code was successfully used before for dual coolant blanket analysis [A. Khodak et al., Fusion Eng. and Des. 137 (2018)]. Recently the same code was modified to allow verified simulation of MHD flows at high Hartmann numbers of several thousand typical for blanket applications. CFD code receives volumetric heat source distribution from the neutronic analysis based on MCNP code. In addition, direct tritium breeding simulation will be performed allowing optimization of the blanket performance. 2D axisymmetric version of neutronics code will be used for rapid optimization, with 3D version employed for detailed analysis. The surface heat distribution on the plasma facing wall will be defined by the software HEAT allowing 3D modeling of the heat flux based on the magnetic field distribution including gyro-orbit effects. Results of thermal analysis are imported into structural analysis code also included in the system. Finally, direct import of CAD geometry will be used for analyzing all components and as a result design option can be efficiently optimized.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a Multicomponent Prediction Model for Acute Esophagitis in Lung Cancer Patients Receiving Chemoradiotherapy

Purpose: To construct a model for the prediction of acute esophagitis in lung cancer patients receiving chemoradiotherapy by combining clinical data, treatment parameters, and genotyping profile. Patients and Methods: Data were available for 273 lung cancer patients treated with curative chemoradiotherapy. Clinical data included gender, age, World Health Organization performance score, nicotine use, diabetes, chronic disease, tumor type, tumor stage, lymph node stage, tumor location, and medical center. Treatment parameters included chemotherapy, surgery, radiotherapy technique, tumor dose, mean fractionation size, mean and maximal esophageal dose, and overall treatment time. A total of 332 genetic polymorphisms were considered in 112 candidate genes. The predicting model was achieved by lasso logistic regression for predictor selection, followed by classic logistic regression for unbiased estimation of the coefficients. Performance of the model was expressed as the area under the curve of the receiver operating characteristic and as the false-negative rate in the optimal point on the receiver operating characteristic curve. Results: A total of 110 patients (40%) developed acute esophagitis Grade {>=}2 (Common Terminology Criteria for Adverse Events v3.0). The final model contained chemotherapy treatment, lymph node stage, mean esophageal dose, gender, overall treatment time, radiotherapy technique, rs2302535 (EGFR), rs16930129 (ENG), rs1131877 (TRAF3), and rs2230528 (ITGB2). The area under the curve was 0.87, and the false-negative rate was 16%. Conclusion: Prediction of acute esophagitis can be improved by combining clinical, treatment, and genetic factors. A multicomponent prediction model for acute esophagitis with a sensitivity of 84% was constructed with two clinical parameters, four treatment parameters, and four genetic polymorphisms.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A three dimensional field formulation, and isogeometric solutions to point and line defects using Toupin's theory of gradient elasticity at finite strains

In this study, we present a field formulation for defects that draws from the classical representation of the cores as force dipoles. We write these dipoles as singular distributions. Exploiting the key insight that the variational setting is the only appropriate one for the theory of distributions, we arrive at universally applicable weak forms for defects in nonlinear elasticity. Remarkably, the standard, Galerkin finite element method yields numerical solutions for the elastic fields of defects that, when parameterized suitably, match very well with classical, linearized elasticity solutions. The true potential of our approach, however, lies in its easy extension to generate solutions to elastic fields of defects in the regime of nonlinear elasticity, and even more notably for Toupin's theory of gradient elasticity at finite strains (Toupin Arch. Ration. Mech. Anal., 11 (1962) 385). In computing these solutions we adopt recent numerical work on an isogeometric analytic framework that enabled the first three-dimensional solutions to general boundary value problems of Toupin's theory (Rudraraju et al. Comput. Methods Appl. Mech. Eng., 278 (2014) 705). We first present exhaustive solutions to point defects, edge and screw dislocations, and a study on the energetics of interacting dislocations. Then, to demonstrate the generality and potential of our treatment, we apply it to other complex dislocation configurations, including loops and low-angle grain boundaries.

36 MATERIALS SCIENCE↗

Dislocation evolution in 316 L stainless steel during multiaxial ratchetting deformation

Dislocation patterns and their evolutions in 316 L stainless steel during the multiaxial ratchetting deformation were observed by transmission electron microscopy (TEM). The microscopic observations indicate that the dislocation evolution presented during the multiaxial ratchetting with four kinds of multiaxial loading paths is similar to that in the uniaxial case [G. Z. Kang et al., Mater Sci Eng A 527 (2010) 5952]. That is, dislocation networks and dislocation tangles are formed quickly by the multiple-slip and cross-slip of dislocation activated by applied multiaxial stress; and then polarized patterns such as dislocation walls and elongated incipient dislocation cells are formed at the last stage of multiaxial ratchetting. The dislocation patterns evolve more quickly from the modes at low dislocation density to the ones at high density during the multiaxial ratchetting than that in the uniaxial case, and some traces of multiple-slip are observed in the multiaxial ones. The dislocation evolution during the multiaxial ratchetting deformation is summarized by comparing the observed dislocation patterns with those presented in the multiaxial strain-controlled and symmetrical stress-controlled cyclic tests. The multiaxial ratchetting of 316 L stainless steel can be microscopically and qualitatively explained by the observed evolution of dislocation patterns. - Highlights: Black-Right-Pointing-Pointer Dislocation patterns change from lines and nets to tangles, walls and cells. Black-Right-Pointing-Pointer Dislocation patterns evolve quicker in the multiaxial case. Black-Right-Pointing-Pointer Aligned dislocation arrays and some traces of multiple slips are observed. Black-Right-Pointing-Pointer Heterogeneous dislocation patterns result in the multiaxial ratchetting.

36 MATERIALS SCIENCE↗

Microstructural evolution of nanocrystalline Fe–Zr alloys upon annealing treatment

Nanocrystalline Fe–Zr alloys exhibit an extraordinary thermal stability at elevated temperatures, which enables their potential applications in various fields. However, there remain concerns regarding the controlling stabilization mechanisms responsible for their thermal stability. In this work, two nanocrystalline Fe–Zr alloys containing 1 at.% Zr and 5 at.% Zr were annealed at various temperatures (T{sub ann}) up to 900 °C. Microstructural evolution of the alloys upon annealing was investigated by means of an X-ray diffractometer equipped with a 2-dimensional detector and transmission electron microscopy. Below 600 °C, microstructures of the two alloys consist of single nanocrystalline ferrite whose grain size is rather stable upon annealing treatments. Above 600 °C, accompanying the precipitation of Fe{sub 3}Zr phase, an apparent grain coarsening of ferrite is observed, whereas the thermal stability of the alloys is still considerably higher than that of nanocrystalline pure Fe. Based on the experimental results, it was claimed that stabilization of the nanocrystalline Fe–Zr alloys should not be totally ascribed to the thermodynamic stabilization mechanism due to the reduction in grain boundary energy as suggested in earlier investigations [K.A. Darling et al., Scr. Mater. 59 (2008) 530 and K.A. Darling et al., Mater. Sci. Eng. A527 (2010) 3572]; when T{sub ann} is higher than 600 °C, along with the precipitation of Fe{sub 3}Zr, the effect of thermodynamic stabilization is weakened, the kinetic effect arising from Zener pinning of Fe{sub 3}Zr precipitates turns to be an important mechanism contributing to the stabilization of the nanoscale grain size. - Highlights: • We show clear evidence of precipitation of Fe{sub 3}Zr phase above 600 °C. • Stabilization of nanostructure is not solely controlled by thermodynamic mechanism. • Above 600 °C, Zener pinning plays an important role in stabilizing nanostructure.

36 MATERIALS SCIENCE↗

Toward reducing uncertainty quantification costs in DEM models of particulate flow: Testing simple, sensitivity-based, forward uncertainty propagation techniques

The performance of two conceptually-simple uncertainty quantification techniques are tested against the rigorous nested-loop sampling technique of Roy and Oberkampf (Comput Methods Appl Mech Eng, 200: 2131–2144, 2011) (herein called full-sampling) using two very small-scale DEM-based models of particulate flow (one gas-solid flow and one granular flow). The first simplified forward uncertainty propagation technique, reduced-sampling, uses a sensitivity analysis to eliminate uncertain inputs that have little impact on the model output prior to nested-loop sampling. The second technique, boundary-sampling, uses a sensitivity analysis to inform the selection of two bounding cases for each key model output. In conclusion, the uncertainties in the model outputs obtained via the reduced- and boundary-sampling methods agree well with those from full-sampling for both the gas-solid and granular flow models while yielding computational savings of 65–75% (reduced sampling) and 94–97% (boundary sampling).

42 ENGINEERING↗

Hydrodynamic instability experiments with three-dimensional modulations at the National Ignition Facility

The first hydrodynamic instability growth measurements with three-dimensional (3D) surface-roughness modulations were performed on CH shell spherical implosions at the National Ignition Facility (NIF) [G. H. Miller, E. I. Moses, and C. R. Wuest, Opt. Eng. 43, 2841 (2004)]. The initial capsule outer-surface amplitudes were increased approximately four times, compared with the standard specifications, to increase the signal-to-noise ratio, helping to qualify a technique for measuring small 3D modulations. The instability growth measurements were performed using x-ray through-foil radiography based on time-resolved pinhole imaging. Averaging over 15 similar images significantly increased the signal-to-noise ratio, making possible a comparison with 3D simulations. At a convergence ratio of ~2.4, the measured modulation levels were ~3 times larger than those simulated based on the growth of the known imposed initial surface modulations. Several hypotheses are discussed, including increased instability growth due to modulations of the oxygen content in the bulk of the capsule. In conclusion, future experiments will be focused on measurements with standard 3D ‘native-roughness’ capsules as well as with deliberately imposed oxygen modulations.

42 ENGINEERING↗

An efficient method for unfolding kinetic pressure driven VISAR data

Velocity Interferometer System for Any Reflector (VISAR) [Barker and Hollenbach, J. Appl. Phys. 43, 4669 (1972)] is a well-known diagnostic that is employed on many shock physics and pulsed-power experiments. With the VISAR diagnostic, the velocity on the surface of any metal flyer can be found. For most experiments employing VISAR, either a kinetic pressure [Grady, Mech. Mater. 29, 181 (1998)] or a magnetic pressure [Lemke et al., Intl J. Impact Eng. 38, 480 (2011)] drives the motion of the flyer. Moreover, reliable prediction of the time-dependent pressure is often a critical component to understanding the physics of these experiments. Although VISAR can provide a precise measurement of a flyer’s surface velocity, the real challenge of this diagnostic implementation is using this velocity to unfold the time-dependent pressure. The purpose of this study is to elucidate a new method for quickly and reliably unfolding VISAR data.

42 ENGINEERING↗

Thermodynamics of HMX Polymorphs and HMX/RDX Mixtures

In this paper, we present thermodynamic models for the five most commonly studied phases of the energetic material octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX): liquid HMX and four solid polymorphs (α-, β-, γ-, and δ-HMX). We show results for the density, heat capacity, bulk modulus, and sound speed, as well as a phase diagram that illustrates the temperature and pressure regions over which the various HMX phases are most thermodynamically stable. The models are based on the same equation of state presented in our recently published paper [Myint et al., Ind. Eng. Chem. Res., 2016, 55, 2252] on another energetic material, hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). We combine our HMX and RDX models together so that the equation of state can also be applied to liquid and solid mixtures of HMX/RDX. This allows us to generate an HMX/RDX phase diagram and calculate the enthalpy change associated with a few different kinds of phase transitions that these mixtures may undergo. Our paper is the first to present a single equation of state that is capable of modeling both pure HMX and HMX/RDX mixtures. A distinct feature of HMX is the strongly metastable nature of its polymorphs. This has caused some ambiguity in the literature regarding the thermodynamic stability of α-HMX. Finally, by examining possible arrangements for the relative order of the six different solid-solid transition (α–β, α–γ, α–δ, β–γ, β–δ, and γ–δ) temperatures, we conclude that α-HMX must be thermodynamically stable so that the HMX phase diagram must have an α phase region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗