SEARCH · Engineering Papers

Results for “EARTH CURRENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Doping-induced spin reorientation in kagome magnet TmMn 6 ⁢Sn 6

The kagome-lattice compounds RMn 6 Sn 6 (R is a rare-earth element), where the Mn atoms form a kagome net in the basal plane, are currently attracting a great deal of attention as they have been shown to host complex magnetic textures and electronic topological states strongly sensitive to the choice of the R atom. Among the magnetic R atoms, TmMn 6 Sn 6 orders with the easy-plane magnetization forming a complex magnetic spiral along the c axis. Previous neutron studies carried out on polycrystalline samples found that Ga doping changes the magnetic anisotropy from easy-plane to easy-axis. Here, in this study, we present magnetic and magnetotransport measurements on a single crystal and first-principles calculations in the doping series of TmMn 6 Sn 6-x Ga x . We find that the magnetic properties are highly sensitive even to a small concentration of Ga. With minimal Ga substitution, the easy-plane anisotropy is maintained, which gradually changes to the easy-axis anisotropy with increasing Ga. We discuss these observations with respect to the effect of Ga doping on magnetocrystalline anisotropy and Tm crystal field.

Gazzah, Mohamed El [University of Notre Dame, IN (↗

DOE OSTI2025

Complex surface topographic changes from explosive experiments at the Dry Alluvium Geology site, southern Nevada, United States

Understanding the surface topographic change that results from underground explosions is important for global security. Current techniques to relate the surface change to underground explosion characteristics usually involve assuming the earth has homogenous properties, leading to highly variable interpretations. Here we use an unoccupied aerial platform and a digital single lens reflex camera along with 200+ ground control points surveyed with a real-time kinematic global navigation satellite system to measure the surface topographic change resulting from two underground explosions at the Dry Alluvium Geology site in Yucca Flat, Nevada National Security Site, southern Nevada, United States. We find areas of 5–7 cm of subsidence that are not directly above the explosion source but rather 200–300 m away. For experiment DAG2, this zone is located south and west of the explosion, while for DAG4, there is a zone of subsidence located northeast of the explosion. In addition, late-time measurements show as much as 5 cm of horizontal change without measurable associated vertical change in the weeks following DAG4 but not DAG2. These indicate that the deformation resulting from underground chemical explosions can be very complex and bear little to no resemblance to predictions using half-space models. It is likely the tectonic environment plays a significant role in controlling the surface change, but the details are not fully understood.

58 GEOSCIENCES↗

DOE OSTI2025

X-ray absorption spectroscopy of lanmodulin-derived peptides bound to rare earth elements

A sustainable and robust supply chain of rare earth elements (REEs) is necessary to meet our consumer, national security and clean energy goals. However, current intra-REE separation technologies (e.g. solvent extraction) are costly and carry a heavy environmental burden. Therefore, the development of new aqueous based ligands that are selective for individual REEs will be integral in future REE production systems. To develop these ligands, an understanding of how ligand coordination structure relates to selectivity is imperative. We used X-ray absorption spectroscopy (XAS) to observe the local structure around four lanthanide (Ln) ions (La, Ce, Pr and Nd) complexed by water and several relevant chelating ligands [lanmodulin EF-hand 1 peptides (LanM1), ethylenediaminetetraacetic acid (EDTA), aminotris(methylenephosphonic acid) (ATMP) and citric acid]. To collect these liquid-phase XAS spectra, we developed a new flow cell that prevents bubble interference and beam damage to the samples. In the X-ray absorption near-edge structure (XANES), we observed energy shifts in the white line, white line broadening and differences in the white line intensity of different Ln–ligand complexes between ligands. In the extended X-ray absorption fine structure (EXAFS), we distinguished differences in peak intensity and distance between coordinating ligands. Differences in the local coordination structure between Ln–LanM1 peptide complexes were more subtle compared with the other ligands (La–water, La–EDTA, La–ATMP and La–citric acid complexes). Further XANES and EXAFS studies, in combination with modelling and other techniques, could greatly improve our structural knowledge of how these aqueous ligands bind Ln ions and how they can be used to design more selective ligands for more efficient and sustainable REE separations.

EDTA↗

DOE OSTI2025

Opening doors to physical sample tracking and attribution in Earth and environmental sciences

Physical samples and their associated data and metadata underpin scientific discoveries across disciplines and can enable new science when appropriately archived. However, there are significant gaps in current practices and infrastructure that prevent accurate provenance tracking, reproducibility, and attribution. For most samples, descriptive metadata are often sparse, inaccessible, or absent. Samples and associated data and metadata may also be scattered across numerous physical collections, data repositories, laboratories, data files, and papers with no clear linkage or provenance tracking as new information is generated over time. The Earth Science Information Partners (ESIP) Physical Samples Curation Cluster has therefore developed guidance for scientific authors on ‘Publishing Open Research Using Physical Samples.’ This involved synthesizing existing practices, gathering community feedback, and assessing real-world examples. We identified improvements needed to enable authors to efficiently cite and link Earth science samples and related data, and track their use. Our goal is to help improve discoverability, interoperability, and reuse of physical samples, and associated data and metadata. Though primarily focused on the needs of Earth and environmental sciences, these guidelines are broadly applicable.

58 GEOSCIENCES↗

DOE OSTI2025

Rare Earth Element-Induced Condensation of the Block V of the Repeats-in-Toxin Domain from CyaA from Bordetella pertussis for Separations

Rare earth elements (REEs) are critical for the development of a range of new technologies. However, the current industrial separation processes of these metals from natural sources, recycled materials, and industrial effluents involve the large consumption of organic solvents, resulting in a sizable environmental footprint. We aim to exploit the high affinity of the block V peptide of the repeats-in-toxin (RTX) domain of the adenylate cyclase protein from Bordetella pertussis for the separation of REEs. This peptide selectively binds with lanthanide (Ln) cations and can undergo Ln-induced phase separation, which can be used in bioseparation processes. Here, we evaluated the self-assembling structures of complexes of the RTX domain peptide folded in the presence of Ln 3+ cations. Size distribution and surface potential measurements of complexes were taken to understand the Ln-induced changes in the complexed peptide. Transmission electron microscopy imaging was used to explore the structures of complexes, while anomalous small-angle X-ray scattering measurements were used to determine the distribution of Ln 3+ ions within the protein-based macrostructures. In the presence of excess Ln 3+ , we observed the formation of coral-like cylindrical structures comprised of Ln 3+ -RTX complexes, with approximately eight trivalent metals per peptide within the nanosized assemblies. These findings provide new insights into the structural organization of assembled RTX domains and their ability to coordinate with REEs, forming nanosized, metal-rich structures that naturally condense, providing a proof-of-concept for protein-based separation processes of these critical materials.

chemical structure↗

DOE OSTI2025

Mechanically and Chemically Robust Lanmodulin-Functionalized Silk Sponges for Rare Earth Element Sequestration

The extraction of rare-earth elements (REEs) from low-grade sources like electronic waste (E-waste) could supplement current unsustainable mining practices. REEs are crucial for various industries, but supply struggles to meet growing demand. Herein, we present an environmentally friendly method for REE extraction using silk protein sponges functionalized with lanmodulin (LanM), a protein that selectively binds REEs. These sponges are relatively facile to fabricate and scale, while offering highly selective REE binding. The REEs can then be recovered via simple acid leaching, allowing sponge reuse for multiple cycles as well as specific desorption of different REEs by changing the pH of the desorption buffer. Finally, this method avoids harmful solvents used in traditional extraction and enables recycling of REEs from industrial and E-waste.

REEs↗

DOE OSTI2024

Absolute magneto-optical measurement of magnetic field on a long pulse high electrical current driven solenoid

We describe a direct absolute magneto-optical approach to measuring the magnetic field driven by long pulse width (>5 ms) and high electrical current (∼kA) in a solenoidal coil. The magnetic field and electrical current are among the most important operating parameters in lightning research and electrical power distribution and are essential to understanding the properties of the radiation output in pulsed energy accelerators as well as other research platforms. However, accurately measuring these magnetic fields and electrical currents using conventional electrical diagnostics is difficult due to the strength of ionizing radiation and electromagnetic interference. Our approach uses a fiber coupled laser beam with a rare earth element material sensing crystal that is highly resistant to electromagnetic interference, allows for absolute measurement, and does not require an external calibration. Here, we focus on device theory, operating parameters, magneto-optical results from an experiment on a high current solenoid, and comparison with a calculation of the magnetic field and reference electrical current flowing downstream of the solenoid.

Owens, Israel [Sandia National Laboratories (SNL-N↗

DOE OSTI2025

Hot droughts in the Amazon provide a window to a future hypertropical climate

Tropical forests represent the warmest and wettest of Earth’s biomes, but with continued anthropogenic warming, they will be pushed to climate states with no current analogue. Droughts in the tropics are already becoming more intense as they occur at successively higher temperatures. Here, in this study, we synthesize multiple datasets to assess the effects of hot droughts on a central Amazon forest. First, a more than 30-year record of annually resolved forest demographic data from a selective logging experiment showed higher tree mortality during intense droughts, particularly among fast-growing pioneer species with low wood density. Second, analysis of ecophysiological field measurements from the 2015 and 2023 El Niño droughts identified a soil moisture threshold beyond which transpiration rates rapidly declined. As rainless days beyond this threshold continued, drought conditions intensified, increasing the potential for tree mortality from hydraulic failure and carbon starvation. Third, analyses from the Coupled Model Intercomparison Project Phase 6 demonstrated that under high-emission scenarios, a large area of tropical forest will shift to a hotter ‘hypertropical’ climate by 2100. Last, under a hypertropical climate, temperature and moisture conditions during typical dry season months will more frequently exceed identified drought mortality thresholds, elevating the risk of forest dieback. Present-day hot droughts are harbingers of this emerging climate, offering a window for studying tropical forests under expected extreme future conditions.

drought↗

DOE OSTI2026

CMIP7 data request: land and land ice priorities and opportunities

The Land and Land Ice Theme in the Coupled Model Intercomparison Project Phase 7 (CMIP7) represents the current understanding of physical processes in land surface ecosystems, hydrology, cryosphere, and their physical interactions with other Earth system components. Simulations from Earth system models (ESMs) could provide crucial information for assessing planetary safety, such as critical tipping elements, and be used to inform climate risks for improving climate impact assessments and policy decisions. This paper presents a collaborative effort to identify scientific opportunities in the Land and Land Ice Theme of the CMIP7 Data Request. The proposed opportunities build upon advances in ESMs, including new freshwater system and land ice processes being included in CMIP7, as well as the scientific community's demand for high-frequency and sub-grid-scale land surface outputs. In total, 25 variable groups that contain 716 variables have been identified to be potentially available to the broad scientific audience for performing analysis in land–atmosphere coupling, hydrological processes and freshwater systems, glacier and ice sheet mass balance and their influence on the sea levels, land use, and plant phenology. Key reflections from this data request effort include advocacy for closer engagement between the user community and modeling groups, reduction in the technical barriers to tracking existing parameters and defining new variables, and more streamlined variable management. These will be essential to enhance the usability and reliability of CMIP7 outputs for climate and Earth system research and applications to a broad audience that relies on the CMIP7 endeavor.

Li, Yue [Univ. of California, Los Angeles, CA (Uni↗

DOE OSTI2025

A round bobbin critical current measurement and thermal runaway simulation of REBCO coated conductors

A round bobbin test has been widely used to measure critical current Ic of practical superconductors including Nb–Ti, Nb3Sn, and Bi-2212 round strands at 4.2 K and in high magnetic fields but rarely used for rare earth-barium-copper-oxide (REBCO) coated conductor tapes. Here, we applies this method to REBCO tapes and test their Ic at 77 K, self-field, and 4.2 K with a magnetic field of 14 T applied parallel to the tape. The sample carries very high current densities; it is 1.3 m long and has a dense array of voltage taps that allows probing localized thermal runaways and correlation with Ic variations along the length. At 77 K, the Ic values of all sections were measured and found to be rather uniform. However, at 4.2 K, we found that a 3 cm section has 90% of the overall voltage drop and it went into thermal runaways upon further increasing current. Thus, at 4.2 K, we were prevented by localized thermal runaways and unable to determine Ic of most of the REBCO conductor sections; this behavior is different from Bi-2212 and Bi-2223 for which Ic of all turns of a round barrel sample can be determined. We simulate REBCO tapes during current ramping to a thermal runaway and analyze impacts of various factors including cooling, conductor n-values, and thickness of stabilizer on the thermal runaway current Iq. The combined experiments and simulations identify n-value as a crucial factor that leads to the observed differences between Bi-2212 and REBCO. Together with cooling and the standard deviation of Ic variations along the length, the n-value determines whether Iq is above or below the average Ic of a long piece of conductor and their ratio Iq/Ic,ave, greatly affecting quench detection and thermal runaway prevention strategies of Bi-2212 and REBCO magnets.

Mosat, Marek↗

DOE OSTI2025

Adsorption of Rare Earth Elements to Kaolinite [dataset]

Rare earth elements (REEs) are critical components of modern technology behind renewable energy, transportation, and electronics but have a limited current supply. A substantial portion of global REE production relies on ion adsorption deposits. A high abundance of kaolinite in REE enrichment zones within these deposits suggests that kaolinite controls the subsurface migration of REEs. This study aimed to improve the current understanding of REE binding to kaolinite under varying water chemistry conditions. We conducted batch experiments with kaolinite (KGa-2) and three REEs (Nd, Dy, and Yb) at varying pH, electrolyte concentration, dissolved inorganic carbon (DIC), low molecular weight organic acids (citric and oxalic acids), and total REE concentration conditions. Increasing electrolyte concentration inhibits REE adsorption at pH 7, suggesting that ion exchange contributes to adsorption at these pH values. DIC affects adsorption above pH 7−8 by forming strong aqueous complexes with heavy REEs. Citric acid decreases REE adsorption via aqueous complexation of REEs at pH 5 but does not affect adsorption at pH 5. The surface complexation model captures the main adsorption trends with two mechanisms: ion exchange on basal planes at pH ∼6 and inner-sphere surface complexation to edge sites at pH ∼6. Equilibrium constants for surface complexation increase in the order of Yb Dy Nd, indicating a higher strength of adsorption for heavy REEs. This study demonstrates how water chemistry conditions control the adsorption mechanisms that may determine the mobility of REEs in subsurface environments rich in kaolinite.

58 GEOSCIENCES↗

DOE OSTI2025

Adsorption of REEs to Kaolinite via Ion Exchange and Surface Complexation as a Function of Water Chemistry

Rare earth elements (REEs) are critical components of modern technology behind renewable energy, transportation, and electronics but have a limited current supply. A substantial portion of global REE production relies on ion adsorption deposits. A high abundance of kaolinite in REE enrichment zones within these deposits suggests that kaolinite controls the subsurface migration of REEs. This study aimed to improve the current understanding of REE binding to kaolinite under varying water chemistry conditions. We conducted batch experiments with kaolinite (KGa-2) and three REEs (Nd, Dy, and Yb) at varying pH, electrolyte concentration, dissolved inorganic carbon (DIC), low molecular weight organic acids (citric and oxalic acids), and total REE concentration conditions. Increasing electrolyte concentration inhibits REE adsorption at pH < 7, suggesting that ion exchange contributes to adsorption at these pH values. DIC affects adsorption above pH 7–8 by forming strong aqueous complexes with heavy REEs. Citric acid decreases REE adsorption via aqueous complexation of REEs at pH > 5 but does not affect adsorption at pH < 5. The surface complexation model captures the main adsorption trends with two mechanisms: ion exchange on basal planes at pH < ∼6 and inner-sphere surface complexation to edge sites at pH > ∼6. Equilibrium constants for surface complexation increase in the order of Yb > Dy > Nd, indicating a higher strength of adsorption for heavy REEs. This study demonstrates how water chemistry conditions control the adsorption mechanisms that may determine the mobility of REEs in subsurface environments rich in kaolinite.

58 GEOSCIENCES↗

DOE OSTI2025

Litter Production and Foliar Nutrient Resorption in Pioneer and Non-Pioneer Species in a Selective Logging Experiment in the Central Amazon, BIONTE, ZF-2, Manaus, 2022-23

This dataset was collected near the city of Manaus, Brazil, at the Experimental Station of Tropical Forestry (EEST, aka “ZF2”), inside the BIONTE (BIOmass and NuTrient Experiment). The experiment included three levels of increasing selective logging intensity, along with control, with 1-hectare permanent plots (12 total) located at the center of 4-hectare treatment plots. The vegetation has a high floristic diversity, the soils of the region are poor in nutrients, and the topography is characterized by plateaus (where BIONTE is located), and also valley bottoms and slopes. Three treatments of differing logging intensities were applied in the BIONTE experiment (T1, T2 and T3). The study was conducted in Treatment 3 (Block I – permanent plot), which represents the most intensive logging treatment, with 69% of the basal area (m²∙ha⁻¹) removed in 1988. The present dataset spans the period from May 1, 2022, to May 1, 2023. The data package includes leaf_nutrient_data, litterfall_total_data, leaf_litterfall_species_specific_data, and species_info, all provided in .csv format. These formats allow users to process and analyze the data in various software applications and programming languages, such as Python and R. This dataset was collected to advance knowledge on nutrient cycling in Amazonian forests, specifically distinguishing between species with two distinct functional traits: fast-growing and slow-growing. It also aims to improve Earth System Models, such as the E3SM Functionally Assembled Terrestrial Ecosystem Simulator (FATES). Additionally, it was used in a paper currently in preparation (Carvalho et al., in prep.), which aims to quantify seasonal litter production and foliar nutrient resorption in pioneer (fast-growing) and non-pioneer (slow-growing) tree species in the central Amazon. Specifically, it seeks to answer two key questions: 1) Is there a difference in leaf litter production, leaf nutrient flux and leaf nutrient concentration between pioneers and non-pioneers species? Is there a difference in the efficiency of foliar nutrient resorption between pioneers and non-pioneers species?

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Standardizing experimental approaches to investigate interactions between bacteria and ectomycorrhizal fungi

Bacteria and ectomycorrhizal fungi (EcMF) represent two of the most dominant plant root-associated microbial groups on Earth, and their interactions continue to gain recognition as significant factors that shape forest health and resilience. Yet, we currently lack a focused review that explains the state of bacteria-EcMF interaction research in the context of experimental approaches and technological advancements. To these ends, we illustrate the utility of studying bacteria-EcMF interactions, detail outstanding questions, outline research priorities in the field, and provide a suite of approaches that can be used to promote experimental reproducibility, field advancement, and collaboration. Though this review centers on the ecology of bacteria, EcMF, and trees, it by default offers experimental and conceptual insights that can be adapted to various subfields of microbiology and microbial ecology.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Neutron stars as a probe of the cosmic neutrino background

The cosmic neutrino background ( C ν B ) constitutes the last observable prediction of the standard cosmological model, which has yet to be detected directly. In this work, we show how the coherent scattering of neutrinos off dense neutron matter can lead to an additional cooling channel in neutron stars (NSs). We also include the effects of gravitational capture and boosting, but find that the cooling is efficient only in the presence of large overdensities. We further discuss the prediction of a boosted C ν B flux on Earth from nearby NSs and the potential detection prospects in the case of a future nearby galactic supernova. Although currently these ideas do not offer any detection prospects, they can be used to constrain overdensities η ≲ 10 11 – 10 14 on short length scales O ( 10 km ) . We also discuss the impact of new physics scenarios, such as long-range forces, on NS cooling through the C ν B . Published by the American Physical Society 2025

Chauhan, Garv (ORCID:0000000281298034)↗

DOE OSTI2026

Survey of Deep Learning and Physics-Based Approaches in Computational Wave Imaging

Computational wave imaging (CWI) extracts hidden structure and physical properties of a volume of material by analyzing wave signals that traverse that volume. Applications include seismic exploration of the Earth’s subsurface, acoustic imaging and nondestructive testing (NDT) in material science, and ultrasound computed tomography (USCT) in medicine. Current approaches for solving CWI problems can be divided into two categories: those rooted in traditional physics and those based on deep learning. Physics-based methods stand out for their ability to provide high-resolution and quantitatively accurate estimates of acoustic properties within the medium. However, they can be computationally intensive and are susceptible to ill-posedness and nonconvexity typical of CWI problems. Machine learning (ML)-based computational methods have recently emerged, offering a different perspective to address these challenges. Diverse scientific communities have independently pursued the integration of deep learning in CWI. This review discusses how contemporary scientific ML techniques, and deep neural networks in particular, have been developed to enhance and integrate with traditional physics-based methods for solving CWI problems. We present a structured framework that consolidates existing research spanning multiple domains, including computational imaging, wave physics, and data science. This study concludes with important lessons learned from existing ML-based methods and identifies technical hurdles and emerging trends through a systematic analysis of the extensive literature on this topic.

42 ENGINEERING↗

DOE OSTI2025

Metal-Insulation REBCO Pancake Coil With Solder Surface Shunt: Testing and Modeling

Rare-earth barium copper oxide (REBCO) high-temperature superconducting (HTS) magnets can generate very high magnetic fields with superior engineering current density and robust mechanical integrity. The no-insulation (NI) winding technique, including its metal-insulation (MI) variant, enables “self-protection” against localized overheating through inter-turn current sharing, improving defect tolerance and allowing temporary current overloads. In REBCO pancake coils, the current-sharing path is predominantly confined to the edges of the REBCO tapes due to insulating buffer layers. Applying a surface shunt using solder can effectively enhance current sharing in NI/MI coils via the REBCO tape edges. Here, in this paper, we present both experimental and numerical research on the current distribution in surface-shunt metal-insulation (SSMI) REBCO pancake coils. We tested a stainless steel co-wound MI REBCO double-pancake coil, before and after applying a soldered surface shunt, in a saturated liquid nitrogen bath. The SSMI coil was modeled using the H-formulation and rotated anisotropic resistivity to study its dynamic behavior, including inter-turn current sharing and intra-turn screening currents. Benchmarked by experimental data, the numerical model is able to study the defect tolerance of the SSMI coil during energization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

The reactivity of experimentally reduced lunar regolith simulants: Health implications for future crewed missions to the lunar surface

Crewed missions to the Moon may resume as early as 2026 with NASA's Artemis III mission, and lunar dust exposure/inhalation is a potentially serious health hazard that requires detailed study. Current dust exposure limits are based on Apollo-era samples that spent decades in long-term storage on Earth; their diminished reactivity may lead to underestimation of potential harm that could be caused by lunar dust exposure. In particular, lunar dust contains nanophase metallic iron grains, produced by “space weathering”; the reactivity of this unique component of lunar dust is not well understood. Herein, we employ a chemical reduction technique that exposes lunar simulants to heat and hydrogen gas to produce metallic iron particles on grain surfaces. We assess the capacity of these reduced lunar simulants to generate hydroxyl radical (OH*) when immersed in deionized (DI) water, simulated lung fluid (SLF), and artificial lysosomal fluid (ALF). Lunar simulant reduction produces surface-adhered metallic iron “blebs” that resemble nanophase metallic iron particles found in lunar dust grains. Reduced samples generate ~5–100× greater concentrations of the oxidative OH* in DI water versus non-reduced simulants, which we attribute to metallic iron. SLF and ALF appear to reduce measured OH*. The increase in observed OH* generation for reduced simulants implies high oxidative damage upon exposure to lunar dust. Low levels of OH* measured in SLF and ALF imply potential damage to proteins or quenching of OH* generation, respectively. Reduction of lunar dust simulants provides a quick cost-effective approach to study dusty materials analogous to authentic lunar dust.

54 ENVIRONMENTAL SCIENCES↗