Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Disordered materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Classical signatures of quenched and thermal disorder in the dynamics of correlated spin systems

Neutron scattering is frequently used to look for evidence of features indicative of quantum-entangled phases of matter such as continua from fractionalisation or quantised excitations. However, the non-specificity of these features and difficulty of both fully quantum treatments and semiclassical models of disorder, make the diagnosis of such states problematic. Here, we demonstrate the feasibility of semiclassical treatments of disordered systems for supercells of ~10 000 spins. By examining a number of classically disordered models we show the presence of quantised excitations, broad continua and anomalous damping originating from quenched disorder or large classical degeneracies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Reversible Disorder-to-Order Transition Induced by Aqueous Lithiation in Vanadate Electrode Materials

Vanadium-based oxides are intriguing electrode materials in aqueous electrochemical systems owing to their low cost and high theoretical capacity for alkali storage, especially lithium (Li) ions. However, a sequence of phase transformations and irreversible structure distortion upon Li-ion intercalation causes structural instability and has been a lingering problem for vanadium oxide electrodes. Here, in this work, we investigate lithium vanadate (Li–V 3 O 8 ) for aqueous Li-ion intercalation and deintercalation processes. Unlike its crystalline V 2 O 5 polymorph, Li–V 3 O 8 retains monophasic lithiation, which is attributed to its disordered crystalline nature and large interplanar distance. Importantly, we show a unique and reversible sequence of disorder-to-order structural transition induced by the extent of lithiation, which indicates sequential interlayer and intralayer lithiation process, and vice versa in delithiation process, supported by electrokinetic analysis, in situ X-ray diffraction (XRD), and Debye scattering simulations. The absence of distortive phase transitions and multilithiation pathways facilitates Li-ion diffusion across the vanadate electrode materials to improve storage capacity. This work opens a new dimension for vanadium-based disordered oxides, accelerating the development of low-cost, aqueous electrochemical systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Significance of the structural configuration of B2 disorder in Co and Ti based Heusler alloys

We investigate here structural (at local and global levels) and transport properties for 𝑋 2 ⁢MnAl (𝑋= Co and Ti). Additionally, the magnetic properties were also studied for Ti 2 ⁢MnAl. Our x-ray diffraction results show that both the compounds stabilize in B2 disordered phase with cubic structure of 𝑃⁢𝑚⁢$\overline{3}$⁢𝑚 space group. Further, the structural configuration of the above disordered phase for both the compounds was identified using combined studies of x-ray absorption spectroscopy and multiple scattering calculations at the transition metal 𝐾 edges. Upon such identification, in the case of Co 2 ⁢Mn 1−𝑦⁢ Cr 𝑦 ⁢Al (𝑦= 0, 0.05, 0.1, 0.2) with change in 𝑦, we are able to establish a better connection quantitatively between the inverse of Mn-Co bonds and peak in the temperature-dependent resistivity. This highlights the crucial importance of a detailed understanding of the nature of B2 disorder. In the case of 𝑦=0, in the temperature range of study, the resistivity is driven by the functional form associated with (a) three-dimensional enhanced electron-electron Coulomb interaction scattering mechanism and (b) an unconventional one-magnon process. For Ti 2 ⁢MnAl, the transport shows metallic glasslike behavior at high temperature, while at low temperature it follows both the Cote-Meisel's model and quantum correction model. In this compound, the magnetic studies suggest the formation of superparamagnetic clusters in the paramagnetic matrix at low temperatures. Our density functional theory results are in line with the transport and magnetic properties. In literature, the spin polarization percentage (𝑃) for 𝑋= Co in B2 disordered phase is 76%. However, the present results emphasize the fact that in B2 disordered phase, the value of 𝑃 can range from 90% to 71% depending on the structural configuration introduced by swapping of the atomic positions of Mn and Al. For the compound under study, the value of percentage spin polarization obtained ranges between 82% to 85%. In addition, we also identify the origin of the difference in the shape of the Mn 3⁢𝑑 density of states for both the alloys. In conclusion, our results for 𝑋= Co alloy highlights the importance of identifying the specific structural configuration associated with a particular disorder category especially in the estimation of 𝑇 𝑐 and 𝑃 and for 𝑋= Ti, the physical properties can be tuned by varying the position of 𝐸 𝐹 and thereby its utilization in device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Neutron Total Scattering Analysis of Materials for the Nuclear Fuel Cycle

Here, this paper reviews recent experimental efforts at the University of Tennessee and Oak Ridge National Laboratory to comprehensively characterize the structural details of materials relevant for the nuclear fuel cycle by employing advanced neutron scattering techniques. For the study of nuclear ceramics, neutron scattering offers distinct advantages over traditional laboratory or synchrotron X-ray diffraction, including enhanced sensitivity to elements with a low atomic mass, such as oxygen, nitrogen, and carbon. The key to these efforts is the recent advancement in the neutron scattering infrastructure at the high-flux diffractometers at the Spallation Neutron Source. The high neutron flux at these instruments enables neutron total scattering, a nondestructive bulk technique that simultaneously captures both short-range structural effects through pair distribution function analysis and long-range order through diffraction pattern analysis. This approach is particularly important for a comprehensive description of defective, disordered, or amorphous nuclear materials. The case studies presented here include analyses of the local defect structure in hyperstoichiometric uranium oxides and short-range order of ion-irradiated ceramics. This advanced analytical methodology will improve our understanding of the behavior of materials in extreme environments and contribute to the development of more resilient nuclear materials.

Neutron scattering↗
DOE OSTI2024

Synthesis pathways to thin films of stable layered nitrides

Controlled synthesis of metastable materials away from equilibrium is of interest in materials chemistry. Thin-film deposition methods with rapid condensation of vapour precursors can readily synthesize metastable phases but often struggle to yield the thermodynamic ground state. Growing thermodynamically stable structures using kinetically limited synthesis methods is important for practical applications in electronics and energy conversion. Here, in this study, we reveal a synthesis pathway to thermodynamically stable, ordered layered ternary nitride materials, and discuss why disordered metastable intermediate phases tend to form. We show that starting from elemental vapour precursors leads to a 3D long-range-disordered MgMoN 2 thin-film metastable intermediate structure, with a layered short-range order that has a low-energy transformation barrier to the layered 2D-like stable structure. This synthesis approach is extended to ScTaN 2 , MgWN 2 and MgTa 2 N 3 , and may lead to the synthesis of other layered nitride thin films with unique semiconducting and quantum properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unlocking Mesoscopic Disorder in Graphitic Carbon with Spectroelectrochemistry

Intrinsic structural and oxidic defects activate graphitic carbon electrodes towards electrochemical reactions underpinning energy conversion and storage technologies. Yet, these defects can also disrupt the long-range and periodic arrangement of carbon atoms, thus, the characterization of graphitic carbon electrodes necessitates in-situ atomistic differentiation of graphitic regions from mesoscopic bulk disorder. Here, we leverage the combined techniques of in-situ attenuated total reflectance infrared spectroscopy and first-principles calculations to reveal that graphitic carbon electrodes exhibit electric-field dependent infrared activity that is sensitive to the bulk mesoscopic intrinsic disorder. With this platform, we identify graphitic regions from amorphous domains by discovering that they demonstrate opposing electric-field-dependent infrared activity under electrochemical conditions. Our work provides a roadmap for identifying mesoscopic disorder in bulk carbon materials under potential bias.

Disordered graphitic carbon electrodes↗
DOE OSTI2025

Impurity-induced moment freezing in NaFe x⁢ Ru 1–x O 2

We report the impact of magnetic impurity substitution on the quantum disordered magnetic ground state of NaRuO 2 . Local S = 5/2 moments are introduced into the frustrated triangular lattice of J eff = 1/2 Ru moments via Fe substitution in NaFe x⁢ Ru 1–x O 2 , and the evolution of the magnetic ground state is reported. Local spin freezing associated with conventional spin-glass behavior is observed upon Fe substitution, marking an impurity-induced freezing of the primarily dynamic magnetic ground state in NaRuO 2 . Furthermore, local Fe moments induce a Curie-Weiss magnetic behavior in the uniform magnetic susceptibility, and the local moment magnitude is best described by dynamic Ru moments polarized about impurity sites. Furthermore, our results establish an impurity-doping phenomenology consistent with inherently dynamic moments in NaRuO 2 that are pinned by local magnetic impurities, similar to “swiss cheese” models of impurity-substituted copper oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Identifying point defects and ordering in the high-entropy layered oxide Li 1.5 MO 3-δ (M=Mn, Al, Fe, Co, Ni) for energy storage applications

High-entropy layered oxides (HELOs) represent a very promising class of next-generation battery cathodes, combining the well-studied properties of layered cathode materials such as LiCoO 2 with the chemical tunability and stability of high-entropy materials. HELO materials often form particles with complex defects and domain structures, complicating accurate characterization of structure and cation mixing. Understanding disorder and order in HELO materials is necessary for understanding their performance and utility as cathodes. Here we demonstrate the characterization of the HELO Li 1.5 MO 3-δ (M = Mn, Al, Fe, Co, Ni), wherein X-ray powder diffraction, transmission electron microscopy imaging, and electron diffraction patterns are analyzed to reveal the presence of ordering in the HELO, with imaging and diffraction simulation employed to compare experimental results to atomic modeling. Finally, without rigorous characterization at the atomic scale, important features such as defect ordering can be easily overlooked and therefore remain unconsidered when interpreting experimental results.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Overcoming Variability: A Reproducible Approach to SERS Detection of Nanodiamonds

Detonation nanodiamonds (DNDs) are formed at specific pressures and temperatures during explosions. Different explosives produce varied yields of DNDs within their detonation soot, with Composition B producing the highest yield. Raman spectroscopy (RS) is often used for the characterization of sp 2 - and sp 3 -hybridized carbon allotropes in carbonaceous materials because of distinct disorder and graphitic bands. Bulk diamond also gives a distinct Raman peak at 1332 cm –1 . Furthermore, as bulk diamond decreases in size to nanometer-sized species, the peak red-shifts and broadens, becoming increasingly difficult to detect with RS using visible excitations. Therefore, surface-enhanced Raman spectroscopy (SERS) was used to enhance the diamond peak of DNDs, enabling better detection and faster examination of DNDs within detonation soot. Previous literature of the SERS of DNDs delivered inconsistent results in spectral signatures and SERS substrates. Herein, refining of the methodology for the acquisition of SERS spectra of DNDs was achieved. Before any SERS experiments, the DNDs were first characterized with normal Raman (NR) and scanning electron microscopy. Two routes for SERS enhancement were evaluated: colloidal noble metal nanoparticles and evaporated silver films. Silver films produced the best signal enhancement of DNDs with the best signal-to-noise and peak enhancements observed at 20–30 nm thick silver films at 5% (∼300 μW) laser power. Consistent, reproducible SERS spectra were acquired of small aggregates of DNDs down to ∼500 nm. NR and SERS mapping analysis of DNDs before and after evaporation of silver films revealed the improvements in the detection capabilities of SERS compared with NR.

Carbon↗
DOE OSTI2025

Identifying the Role of Magnesium Content in Assessing the Electrochemical Performance of (CoCuMgNiZn)O

High-entropy oxides (HEOs) featuring 5 or more metals in approximately equimolar ratios, such as the prototypical rock-salt-structured (CoCuMgNiZn)O, have attracted interest for their potential to display material properties superior to oxides with combinations of 4 or fewer of the component metals. In particular, (CoCuMgNiZn)O has shown promise as an anode for lithium-ion batteries with a high specific capacity retention over extended cycling. Previous studies have suggested that magnesium, despite being electrochemically inert, provides a crucial contribution to the favorable performance of this HEO by stabilizing the crystal structure through repeated charge–discharge cycles. This paper probes the extent and mechanism of the magnesium effect by using a facile microwave-assisted hydrothermal synthesis method to vary the level of Mg content. Moreover, we extensively characterized the product with techniques such as 4D-STEM and ICP-OES, which have not previously been applied in combination with this material, in order to elucidate the relationships among chemical composition, nanostructure, and performance. Here, we show that the level of Mg incorporation is positively correlated with long-term stability and negatively correlated with rate capacity, and that the latter effect yields a stronger influence upon the overall performance, with the best-performing sample possessing a Mg quantity equivalent to ∼1/5 that of an equimolar concentration. This finding demonstrates not only that the variation of individual elemental levels offers a promising and relatively unexplored avenue to optimize the electrochemical performance of HEO materials but also that it should not be assumed that equimolar compositions of constituent elements are necessarily the best.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Understanding the Mn dissolution mechanism in rock salt-type Li 4 Mn 2 O 5 cathodes

For the first time, a detailed exploration of Mn dissolution in disordered rock salt (DRX) Li 4 Mn 2 O 5 is presented. Herein, we apply a suite of synchrotron and lab scale X-ray techniques to both the cathode and the separator harvested from pristine, charged, or cycled lithium half-cells containing the disordered rock salt (DRX) material Li 4 Mn 2 O 5 , in order to understand Mn dissolution processes throughout charging and discharging. Previous research has hypothesized two concurrent effects that may drive Mn dissolution in cells during cycling: acid-induced disproportionation of Jahn–Teller active Mn 3+ and structural rearrangement of the cathode lattice. Through depth probing of the Mn oxidation state in both the cathode and separator via soft X-ray absorption spectroscopy (XAS), hard XAS, and X-ray photoelectron spectroscopy (XPS) in progressive states-of-charge, as well as extended X-ray absorption fine structure (EXAFS) analysis of the local Mn environment, the primary driving force of Mn dissolution is determined to be high-voltage structural rearrangement above 4.2 V. Mn dissolution is, additionally, a main source of capacity fade in Li 4 Mn 2 O 5 DRX cells, which retain only 59% capacity after 20 cycles.

Theibault, Monica↗
DOE OSTI2026

Electrochemical carbon deposition from CO 2 in molten carbonates: substrate-dependent growth

Electrochemical carbon deposition from molten carbonate salts using inert electrodes and no additional catalyst is systematically examined. At sufficiently cathodic potentials, carbon formation occurs within 30 min and transitions from substrate-dependent nucleation to carbon-on-carbon growth. Although deposits formed on either mild-steel or graphite cathodes exhibit comparable thicknesses and salt contents, their macrostructures differ, reflecting differences in early-stage growth rates and surface chemistry. Characterization by ICP-OES, Raman spectroscopy, SEM/EDS, synchrotron powder X-ray diffraction, and C K-edge X-ray absorption near edge structure reveals that the as-deposited carbon is predominantly disordered sp 2 -bonded material. However, post-treatment reveals latent turbostratic ordering in select samples, indicating that short-range order is established during deposition but is obscured by an entrained electrolyte and kinetically formed amorphous phases. No anode-derived contamination is detected, and carbon grown on graphite cathodes shows minimal metallic impurities. These results clarify the role of cathode surface chemistry and provide pathways for controlling electrode-derived impurity incorporation and carbon structure in catalyst-free molten carbonate systems.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Extracting free-energy landscapes of AgMn spin glass thin films with 1/$f$ resistance fluctuations

The temperature-dependent 1/f noise is reported for AgMn (12 at. %) thin films with multiple thicknesses ranging from 15 to 80 nm. A significant increase in the noise magnitude occurs in the spin-glass state. Analysis of the temperature-dependent exponent provides information on the energy barrier distribution and height, which in turn are related to the spin-glass coherence length. Here, we compare our results with those obtained previously on CuMn (13.5 at. %) thin films with similar thicknesses. We observe a similar trend of the increase of the barrier height with respect to thickness, but with relatively lower values for the AgMn barriers as compared to CuMn.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Harnessing Chemical Short‐Range Disorder to Improve Lithium Retention in Epitaxial LLTO Solid‐Electrolyte Thin Films

Lithium lanthanum titanate Li 3x La 2/3-x TiO 3 (LLTO) is a promising perovskite-based solid-state electrolyte for next-generation lithium-ion batteries, but controlling crystallinity and Li stoichiometry in thin-film form is challenging because high growth temperatures are required to achieve good crystallinity while Li remains strongly volatile. Here, we systematically investigate the effect of substrate temperature on epitaxial LLTO thin films grown by pulsed laser deposition. We identify a narrow growth window (750–800°C) in which LLTO films grow as c-axis oriented with atomically flat surfaces. Lower growth temperatures (<750°C) stabilize laterally extended, chemically disordered stripe domains that coexist with ordered LLTO regions, whereas higher temperatures (≥825°C) suppress these defects but promote island morphologies and Al/Ti interdiffusion. While spectroscopy measurements show that Ti remains in the 4+ oxidation state and Li is globally deficient for all films, our depth-resolved time-of-flight secondary ion mass spectrometry studies reveal that the 700°C film retains the highest Li content across its thickness. These results clarify how growth temperature controls crystallinity, chemical short-range disorder, and Li retention, and highlight moderate growth temperatures (∼700°C) as a route to mitigate Li loss in epitaxial solid-electrolyte films.

chemical short-range disorder↗
NASA NTRS1993

High-pressure infrared sepctra of alpha-quartz, coesite, stishovite and silica glass

High-pressure infrared absorption spectra of alpha-quatz, coesite, stishovite, and SiO2 glass are consistent with the primary compression mechanism of the initially tetrahedrally bonded phases being the bending of the Si-O-Si angle at pressures less than 10-20 GPa. At higher pressures, up to 40 GPa, we observe a decline in the intensity of the infrared SiO4 asymmetric-stretching vibrations of all three phases, with an increase in the relative amplitude between 700 and 900/cm. This change in intensities is attributed to an increase in the average coordination number of silicon through extreme distortion of tetrahedra. At pressures above approximately 20 GPa, the low-pressure crystalline polymorphs gradually become amorphous, and the infrared spectra provide evidence for an increase in silicon coordination in these high-density amorphous phases. The pressure-amorphized samples prepared from quartz and coesite differ structurally both from each other and from silica glass that has been compressed, and the high pressure spectra indicate that these materials are considerably more disordered than stishovite under comparable pressure conditions. Average mode Grueneisen parameters calculated for quartz, stishovite and fused silica from both infrared and Raman spectra are compatible with the corresponding thermodynamic value of the Grueneisen parameter, however, that of coesite is significantly discrepant.

Williams, Q.↗
DOE OSTI2024

Electronic Band Structure of a Superconducting Nickelate Probed by the Seebeck Coefficient in the Disordered Limit

Superconducting nickelates are a new family of strongly correlated electron materials with a phase diagram closely resembling that of superconducting cuprates. While analogy with the cuprates is natural, very little is known about the metallic state of the nickelates, making these comparisons difficult. We probe the electronic dispersion of thin-film superconducting five-layer ( n = 5 ) and metallic three-layer ( n = 3 ) nickelates by measuring the Seebeck coefficient S . We find a temperature-independent and negative S / T for both n = 5 and n = 3 nickelates. These results are in stark contrast to the strongly temperature-dependent S / T measured at similar electron filling in the cuprate La 1.36 Nd 0.4 Sr 0.24 CuO 4 . The electronic structure calculated from density-functional theory can reproduce the temperature dependence, sign, and amplitude of S / T in the nickelates using Boltzmann transport theory. This demonstrates that the electronic structure obtained from first-principles calculations provides a reliable description of the fermiology of superconducting nickelates and suggests that, despite indications of strong electronic correlations, there are well-defined quasiparticles in the metallic state. Finally, we explain the differences in the Seebeck coefficient between nickelates and cuprates as originating in strong dissimilarities in impurity concentrations. Our study demonstrates that the high elastic scattering limit of the Seebeck coefficient reflects only the underlying band structure of a metal, analogous to the high magnetic field limit of the Hall coefficient. This opens a new avenue for Seebeck measurements to probe the electronic band structures of relatively disordered quantum materials. Published by the American Physical Society 2024

Grissonnanche, G. (ORCID:0000000251153125)↗
DOE OSTI2026

Electronic glasses from a broken gauge symmetry in disorder-free systems

Glass phases can be stabilized by quenched disorders, as in most spin-glass materials, or self-generated through kinetic freezing in disorder-free systems. A canonical example of the latter is structural glasses, which have been extensively studied for many decades. Yet, how the rugged energy landscape of a glass phase is spontaneously generated in disorder-free systems remains one of the key questions in glass physics. Here, in this work, we present a general electronic mechanism for the emergence of glassy phase using the example of itinerant electrons coupled to XY spins on a lattice. This model can also be viewed as the mean-field theory of a superconducting system with attractive density-density interactions. Intriguingly, the electron gauge symmetry in the strong pairing limit gives rise to a macroscopic degeneracy of XY spins. In the presence of electron hopping that breaks the gauge symmetry, the lifting of the extensive degeneracy leads to a glass phase with disordered pairings. Our findings highlight a scenario in which a glassy state originates from the breaking of quantum gauge symmetry without quenched disorders.

XY model↗
NASA NTRS1989

Crystal growth of SiC for electronic applications

The development of SiC as a high temperature semiconductor material is discussed, focusing on the epitaxial growth of single crystal SiC films on inexpensive single crystal silicon wafers. Progress in the improvement of film morphology and the elimination of antiphase disorder is examined. Potential candidate materials for high temperature semiconductor devices are compared and SiC films are evaluated.

Matus, Lawrence G.↗