Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Deep Direct Use”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

DSS-13 - Using an OSI process control standard for monitor and control

The flexibility and robustness of a monitor and control (M&C) system are a direct result of the underlying inter-processor communications architecture. A new architecture for M&C at the Deep Space Communications Complexes has been developed based on the manufacturing message specification (MMS) process control standard of the open system interconnection (OSI) suite of protocols. This architecture has been tested both in a laboratory environment and under operational conditions at the Deep Space Network experimental station (DSS-13). The DSS-13 experience in the application of OSI standards to support M&C has been extremely successful. MMS meets the functional needs of the station and provides a level of flexibility and responsiveness previously unknown in that environment. The architecture is robust enough to meet current operational needs and flexible enough to provide a migration path for new subsystems. This paper describes the architecture of the DSS-13 M&C system, discuss how MMS was used and the requirements this imposed on other parts of the system, and provides results from systems and operational testing at DSS-13.

Heuser, W. R.↗
NASA NTRS1986

Photoelectrochemical fabrication of spectroscopic diffraction gratings

Photoelectrochemical etching was demonstrated as a means of fabricating a variety of periodic structures in semiconductors. The semiconductor is used as an electrode in an electrochemical cell, and is in contact with a liquid electrolyte. When the crystal is held at a positive voltage and illuminated, etching occurs in only the illuminated regions to a depth proportional to the illumination intensity and exposure time. In Phase 1, it was determined that diffraction gratings could be produced in gallium arsenide crystals by this method, using either a scanned focused laser beam or by uniform illumination of a ruling mask defined in metal or photoresist on the crystal surface. The latter approach was determined to produce V-grooves if the mask is oriented along certain crystallographic directions. These V-grooves were produced with an exceedingly smooth crystal morphology due to the highly controllable nature of the process and the mild electrolytes involved. The results form the basis for photoelectrochemical fabrication of deep, low pitch Eschelle gratings for use in high orders in NASA spectrographic instrumentation such as the Space Telescope Imaging Spectrograph.

Rauh, R. David↗
NASA NTRS1973

System design of the Pioneer Venus spacecraft. Volume 8: Command/data handling subsystems studies

Study tasks for the command and data handling subsystems have been directed to: (1) determining ground data systems, (GDS) interfaces and deep space network (DSN) changes, if required, (2) defining subsystem requirements, (3) surveying existing hardware that could be used or modified to meet subsystem requirements, and (4) establishing a baseline design. Study of the existing GDS led to the conclusion that the Viking configuration GDS can be used with only minor changes required for the Pioneer Venus baseline. Those changes required are associated with providing a predetection recording capability used during probe entry and descent. Subsystem requirements were first formulated with sufficient latitude so that surveys of existing hardware could lead to low cost hardware which, in turn, could modify more narrowly defined subsystem requirements.

Vesely, D. D.↗
NASA NTRS1985

Enhancement of intensity-dependent absorption in InP and GaAs at 1.9 microns by doping

It is pointed out that the study of intensity-dependent absorption (IDA) in general, and two-photon absorption (TPA), in particular, has suffered from experimental difficulties and inadequate theoretical models. Bass et al. (1979) could improve the experimental situation by making use of laser calorimetry to obtain directly the TPA coefficient of a medium with a high degree of sensitivity. In the present investigation, the employed technique has been used to study the effect of deep level dopants on IDA in InP and GaAs. It is found that the coefficient for IDA is strongly dependent on the presence of Fe in InP and Cr in GaAs. The conducted investigation had the objective to examine the effect of deep level impurities on IDA processes in InP and GaAs. Fe-doped InP and Cr-doped GaAs were compared with undoped crystals.

Li, N.-L.↗
NASA NTRS2007

Energy Considerations of Hypothetical Space Drives

The energy requirements of hypothetical, propellant-less space drives are compared to rockets. This serves to provide introductory estimates for potential benefits and to suggest analytical approaches for further study. A "space drive" is defined as an idealized form of propulsion that converts stored potential energy directly into kinetic energy using only the interactions between the spacecraft and its surrounding space. For Earth-to-orbit, the space drive uses 3.7 times less energy. For deep space travel, energy is proportional to the square of delta-v, whereas rocket energy scales exponentially. This has the effect of rendering a space drive 150-orders-of-magnitude better than a 17,000-s Specific Impulse rocket for sending a modest 5000 kg probe to traverse 5 ly in 50 years. Indefinite levitation, which is impossible for a rocket, could conceivably require 62 MJ/kg for a space drive. Assumption sensitivities and further analysis options are offered to guide further inquires.

Millis, Marc G.↗
NASA NTRS2017

Evaluation of Strain Measurement Devices for Inflatable Structures

Inflatable structures provide a significant volume savings for future NASA deep space missions. The complexity of these structures, however, provides difficulty for engineers in designing, analyzing, and testing. Common strain measurement systems for metallic parts cannot be used directly on fabrics. New technologies must be developed and tested to accuractly measure the strain of inflatable structures. This paper documents the testing of six candidate strain measurement devices for use on fabrics. The resistance devices tested showed significant hysteresis during creep and cyclic testing. The capacitive device, however, showed excellent results and little-to-no hysteresis. Because of this issue, only two out of the six proposed devices will continue in development. The resulting data and lessons learned from this effort provides direction for continued work to produce a structural health monitoring system for inflatable habitats.

Litteken, Douglas A.↗
NASA NTRS2017

Evaluation of Strain Measurement Devices for Inflatable Structures

Inflatable structures provide a significant volume savings for future NASA deep space missions. The complexity of these structures, however, provides difficulty for engineers in designing, analyzing, and testing. Common strain measurement systems for metallic parts cannot be used directly on fabrics. New technologies must be developed and tested to accurately measure the strain of inflatable structures. This paper documents the testing of six candidate strain measurement devices for use on fabrics. The resistance devices tested showed significant hysteresis during creep and cyclic testing. The capacitive device, however, showed excellent results and little-to-no hysteresis. Because of this issue, only two out of the six proposed devices will continue in development. The resulting data and lessons learned from this effort provides direction for continued work to produce a structural health monitoring system for inflatable habitats.

Litteken, Doug↗
NASA NTRS2010

Directivity of a Sparse Array in the Presence of Atmospheric-Induced Phase Fluctuations for Deep Space Communications

Widely distributed (sparse) ground-based arrays have been utilized for decades in the radio science community for imaging celestial objects, but have only recently become an option for deep space communications applications with the advent of the proposed Next Generation Deep Space Network (DSN) array. But whereas in astronomical imaging, observations (receive-mode only) are made on the order of minutes to hours and atmospheric-induced aberrations can be mostly corrected for in post-processing, communications applications require transmit capabilities and real-time corrections over time scales as short as fractions of a second. This presents an unavoidable problem with the use of sparse arrays for deep space communications at Ka-band which has yet to be successfully resolved, particularly for uplink arraying. In this paper, an analysis of the performance of a sparse antenna array, in terms of its directivity, is performed to derive a closed form solution to the expected array loss in the presence of atmospheric-induced phase fluctuations. The theoretical derivation for array directivity degradation is validated with interferometric measurements for a two-element array taken at Goldstone, California. With the validity of the model established, an arbitrary 27-element array geometry is defined at Goldstone, California, to ascertain its performance in the presence of phase fluctuations. It is concluded that a combination of compact array geometry and atmospheric compensation is necessary to ensure high levels of availability.

Nessel, James A.↗
NASA NTRS1993

Wind-forced variability of the deep eastern north Pacific: Observations of seafloor pressure and abyssal currents

Data from an array of bottom pressure gauges and a string of current meters in the vicinity of 47 deg N, 139 deg W, are used to examine the deep-ocean variability forced by ocean surface wind stress curl from August 1987 to June 1988. Bottom geostrophic currents are computed from the pressure gauge array, and these correspond well to the long-period directly measured currents at 3000 m. The supratidal-period bottom pressure variations are coherent at 95% confidence with the wind stress curl in period bands of 3-4 days and 15-60 days but removed in distances of 400 and 700 km to the northwest and the southeast, respectively. A linear, two-layer hydrodynamic model is used to examine the theoretical forcing produced by random-phased surface wind fields for the conditions of the eastern north Pacific and the 15- to 60-day-period observed response is reproduced credibly. To model 3- to 15-day variations, more realistic models are required.

Niller, P. P.↗
NASA NTRS2019

Directed-energy propulsion architecture for deep-space missions with characteristic velocities of order 100 km/s

This paper investigates the feasibility of a propulsion system architecture that may enable missions with characteristic velocities in the range 100 to 200 km/s. The conceptual architecture is based on the use of a kilometer-scale, space-based, phased-array laser with an output power of hundreds of megawatts that beams power over distances up to 40 au to a receiving vehicle.

McCarty, Steven↗
NASA NTRSDate not supplied

The Radiometric Scaling of the MODIS and VIIRS Imagers to a Common Reference and Stability Analysis for the Next Edition of CERES Products

The NASA CERES project has provided the climate quality observed TOA and computed surface fluxes to the scientific community. CERES uses MODIS and VIIRS imagers to retrieve cloud properties needed to convert Terra, Aqua, NPP, and NOAA-20 CERES footprint radiance observations into fluxes. The imagers are also used to radiometrically scale the geostationary sensors (GEO) radiances to the imager calibration reference to ensure that the GEO derived cloud properties and broadband TOA fluxes are consistent in both space and time. Both the imager and GEO retrieved cloud properties are used to compute the surface fluxes. The CERES imager and GEO calibration team uses ray-matched radiance pairs to radiometrically scale the SNPP and NOAA-20 VIIRS sensors to the Aqua-MODIS calibration reference. The radiometric scaling is further validated using geostationary imagers as transfer radiometers. The team will rely primarily on deep convective clouds to monitor the imager channel calibration stability and to correct for short term calibration drifts. The DSCOVR satellite was launched on February 25, 2015 and orbits around the L1 Lagrange point directly between the Earth and the sun. The EPIC sensor contains no onboard calibration systems. However, multiple inter-calibration studies have shown that the EPIC imager is very stable in time. The excellent radiometric stability of EPIC allows the use of EPIC observations as a stable reference to validate both the short term drift corrections of the imagers, as well as to validate the radiometric scaling factors between them. Examples of the imager relative calibration using EPIC before and after radiometric scaling will be shown along with the results from the use of invariant targets to remove imager calibration drifts.

DSCOVR-EPIC↗
NASA NTRS1978

Application of geo-truss erectable antenna 1985 - 2000 systems

The geo-truss concept provides a natural structural element to use in the deployment or fabrication of large systems. Three systems conceptually proposed and discussed are: (1) direct TV broadcast to half-time zone, Alaska dnd Hawaii; (2) deep space communication satellite; and (3) coastal water surveillance radar satellite.

Fager, J. A.↗
NASA NTRS2015

On the Effect of Rigid Swept Surface Waves on Turbulent Drag

Passive turbulent drag reduction techniques are of interest as a cost effective means to improve air vehicle fuel consumption. In the past, rigid surface waves slanted at an angle from the streamwise direction were deemed ineffective to reduce skin friction drag due to the pressure drag that they generate. A recent analysis seeking similarities to the spanwise shear stress generated by spatial Stokes layers suggested that there may be a range of wavelength, amplitude, and orientation in which the wavy surface would reduce turbulent drag. The present work explores, by experiments and Direct Numerical Simulations (DNS), the effect of swept wavy surfaces on skin friction and pressure drag. Plates with shallow and deep wave patterns were rapid-prototyped and tested using a drag balance in the 7x11 inch Low-Speed Wind Tunnel at the NASA LaRC Research Center. The measured drag o set between the wavy plates and the reference at plate is found to be within the experimental repeatability limit. Oil vapor flow measurements indicate a mean spanwise flow over the deep waves. The turbulent flow in channels with at walls, swept wavy walls and spatial Stokes spanwise velocity forcing was simulated at a friction Reynolds number of two hundred. The time-averaged and dynamic turbulent flow characteristics of the three channel types are compared. The drag obtained for the channel with shallow waves is slightly larger than for the at channel, within the range of the experiments. In the case of the large waves, the simulation over predicts the drag. The shortcomings of the Stokes layer analogy model for the estimation of the spanwise shear stress and drag are discussed.

Denison, M.↗
NASA NTRS2017

Finding the Needles in the Haystacks: High-Fidelity Models of the Modern and Archean Solar System for Simulating Exoplanet Observations

We present two state-of-the-art models of the solar system, one corresponding to the present day and one to the Archean Eon 3.5 billion years ago. Each model contains spatial and spectral information for the star, the planets, and the interplanetary dust, extending to 50 au from the Sun and covering the wavelength range 0.3-2.5 micron. In addition, we created a spectral image cube representative of the astronomical backgrounds that will be seen behind deep observations of extrasolar planetary systems, including galaxies and Milky Way stars. These models are intended as inputs to high-fidelity simulations of direct observations of exoplanetary systems using telescopes equipped with high-contrast capability. They will help improve the realism of observation and instrument parameters that are required inputs to statistical observatory yield calculations, as well as guide development of post-processing algorithms for telescopes capable of directly imaging Earth-like planets.

extrasolar planetary systems↗
NASA NTRS1988

Trace gas exchanges and convective transports over the Amazonian rain forest

The NASA Amazon Boundary Layer Experiment (ABLE 2A) based in Manaus, Brazil, in July and August 1985, is used to examine meteorological processes responsible for the vertical and horizontal transport of biogenic and anthropogenic trace gases generated over the Amazon basin. Direct sampling of the surrounding environment of deep convective clouds shows marked changes in the vertical distribution of the lower and midtroposphere concentration of O3 and such surface-derived species as CO, CO2, and NO. Thermodynamic observations, together with two-dimensional cloud model simulations, confirm vertical transports within the convection and provide a basis for an estimation of the magnitude and efficiency of cloud upward and downward exchanges. A distinction is drawn between local changes due to convective updrafts and downdrafts and convective overturning as a net result of the storm processes. Marked variability is seen in trace gas concentrations along horizontal flight paths in the vicinity of the convection. Interpretation of simultaneously measured thermodynamic quantities and trace gas concentrations provide the information to infer the presence and direction of atmospheric transports and/or the presence of anthropogenic influences.

Garstang, Michael↗
NASA NTRS1995

Overview of techniques for mitigation of fading and shadowing in the direct broadcast satellite radio environment

The DBS radio propagation environment is divided into three sub-environments, indoor, rural-suburban mobile and urban mobile. Indoor propagation effects are in a large part determined by construction material. Non-metallic materials afford direct, albeit attenuated penetration of the satellite signal with a minimum of multipath signal scattering. Signal penetration into structures using significant metallic materials is often indirect, through openings such as doors and windows and propagation will involve significant multipath components. Even so, delay spread in many situations is on the order of 10's of nanoseconds resulting in relatively flat fading. Thus frequency diversity techniques such as Orthogonal Frequency Division Multiplex (OFDM) and Code Division Multiple Access (CDMA) or equalization techniques do not realize their intended performance enhancement. Antenna diversity, directivity and placement are key mitigation techniques for the indoor environment. In the Rural-Suburban mobile environment with elevation angles greater than 20 deg, multipath components from the satellite signal are 15-20 dB below the line-of-sight signal level and often originate from nearby reflectors. Thus shadowing is the dominant signal impairment and fading effects are again found to be relatively flat for a large fading margin. Because receiver motion induces rapid variations in the signal level, temporal diversity techniques such as interleaving, channel coding and retransmission can be used to combat short intermittent fading events. Antenna diversity and directivity techniques are again useful in this environment. Finally, in the Urban mobile environment, slower vehicle speeds and blockage by buildings causes signal fades that are too long and too deep to combat with signal margin or time diversity. Land-based signal boosters are needed to fill in the coverage gaps of the satellite only broadcast scheme. On frequency boosters are suggested to conserve bandwidth yet these produce long delay multipath and create a frequency selective fading environment. Enter now OFDM, spread spectrum, equalization and other techniques that are capable of deconvolving the channel effects and effecting significant performance improvements by extracting the frequency diversity or time diversity components comprising the received signal.

Bell, David↗
NASA NTRS2004

Fabrication of MEMS-Based Microshutter Arrays for Optical Transmission Selection

A MEMS-based programmable aperture mask is under development at the NASA Goddard Space Flight Center. Termed the Microshutter (u-shutter) Array, the device will be used to control the transmission of light, with both high efficiency and contrast, to a multi-object spectrometer on the James Webb Space Telescope. Fabrication of the p-shutter array employs several novel designs and processing techniques. The current generation of micro-shutters consists of 128x64 pixel arrays with unit cell dimensions of 100x200 microns. Shutters are patterned in silicon nitride and sit on a 100 micron silicon frame that is DRIE etched below each shutter. The front and back sides of the device are shown. A magnetic cobalt-iron alloy patterned on top of the shutter allows it to be actuated 90 degrees out-of-plane, into the frame, by an external magnetic field. An electrode on the shutter and a vertical electrode on the sidewall of the frame, approximately 90pm deep, allow them to be electrostatically latched in their rotated position. The vertical electrode is deposited and patterned on the backside of the frame in a single step using a directionally controlled evaporation. Individual addressing of shutters for electrostatic latching is accomplished via a crosspoint addressing scheme, with no on-chip active components. A portion of an array with shutters in the open, latched, and closed positions is shown. Light loss at shutter edges is minimized by an overhanging aluminum light-shield that is anchored to the frame. A photoresist sacrificial layer is used to raise the light-shield up and over the 2 micron gap that surrounds each pixel. After completion, arrays are subjected to life cycle, environmental and optical testing. Fabricated devices have survived 10(exp 6) actuation cycles at both room and cryogenic temperatures and a 14g rms launch-simulation test. Optical testing has shown contrast measurements between open and closed shutters up to 10000:1.

Lynch, Bernard A.↗