Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Core level spectroscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Single domain spectroscopic signatures of a magnetic kagome metal

Magnetic kagome metals host complex electronic states and real-space magnetic textures, but their small and temperature-dependent magnetic domains make experimental access difficult. Here we show that micro-focused circular-dichroic photoemission spectroscopy enables spectroscopic access to individual magnetic domains in the kagome metal DyMn 6 Sn 6 at low temperature. By tuning to element-specific electronic states, we image domain contrast associated with Dy 4f levels and detect corresponding signatures from Mn core states. The energy dependence of the dichroic response is consistent with modeling and indicates ferrimagnetic alignment between Dy and Mn local moments. Measurements of Mn 3d-derived valence bands, supported by first-principles calculations, reveal features related to orbital magnetization. These results establish element- and orbital-resolved spectroscopy of single magnetic domains and enable studies of magnetic textures and electronic structure in complex magnetic quantum materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Polarization-resolved core exciton dynamics in LiF using attosecond transient absorption spectroscopy

The ability to control absorption by modifying the polarization of light presents an exciting opportunity to experimentally determine the orbital alignment of absorption features. Here, attosecond extreme ultraviolet (XUV) transient absorption spectroscopy is used to investigate the polarization dependence of core exciton dynamics in LiF thin films at the Li + K edge. XUV pulses excite electrons from the Li 1s core level into the conduction band, allowing for the formation of a p-orbital-like core exciton, aligned along the XUV light polarization axis. A sub-5 fs near-infrared (NIR) probe pulse then arrives at variable time delays, perturbing the XUV-excited states and allowing the coherence decay of the core exciton to be mapped. The coherence lifetimes are found to be ≈ 2.4 ± 0.4 fs, which is attributed to a phonon-mediated dephasing mechanism as in previous core exciton studies. The differential absorption features are also shown to be sensitive to the relative polarization of the XUV and NIR fields. The parallel NIR probe induces couplings between the initial XUV-excited p-like bright exciton and s-like dark excitons. When crossed pump and probe polarizations are used, the coupling between the bright and dark states is no longer dipole-allowed, and the transient absorption signal associated with the coupling is suppressed by approximately 90%. This interpretation is supported by simulations of a few-level model system, as well as analysis of the calculated band structure. Here, the results indicate that laser polarization can serve as a powerful experimental tool for exploring the orbital alignment of core excitonic states in solid-state materials.

Attosecond laser spectroscopy↗
DOE OSTI2022

Observation of Potential-Induced Hydration on the Surface of Ceramic Proton Conductors Using In Situ Near-Ambient Pressure X-ray Photoelectron Spectroscopy

Interactions of ceramic proton conductors with the environment under operating conditions play an essential role on material properties and device performance. It remains unclear how the chemical environment of material, as modulated by the operating condition, affects the proton conductivity. Combining near-ambient pressure X-ray photoelectron spectroscopy and impedance spectroscopy, we investigate the chemical environment changes of oxygen and the conductivity of BaZr 0.9 Y 0.1 O 3-δ under operating condition. Changes in O 1s core level spectra indicate that adding water vapor pressure increases both hydroxyl groups and active proton sites at undercoordinated oxygen. Applying external potential further promotes this hydration effect, in particular, by increasing the amount of undercoordinated oxygen. The enhanced hydration is accompanied by improved proton conductivity. Here, this work highlights the effects of undercoordinated oxygen for improving the proton conductivity in ceramics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Differences in Printed Contacts Lead to Susceptibility of Silicon Cells to Series Resistance Degradation

Here, in this case study, we investigate a degradation mode occurring at the cell level in fielded multi-Si modules. The modules exhibit a mix of affected and unaffected cells. Affected cells show a progressive, series-resistance-related power degradation as shown via module- and cell-level IV curves, along with electroluminescence (EL) and PL imaging at the module, cell, and cell core sample scales. Scanning electron microscopy and energy-dispersive X-ray spectroscopy reveal a difference in the oxides in the silver paste used in screen printing of the gridline contacts. The paste in the affected cells is lead rich, whereas the paste in the unaffected cells is zinc rich. This suggests that the cells were screen printed with different silver paste compositions and possibly firing conditions, and that the different composition correlates with the susceptibility to degradation. Our results indicate degradation of the contact at the oxide-silver interface, causing a severe increase in series resistance across the cell that continues to progress over time.

14 SOLAR ENERGY↗
DOE OSTI2020

Si-based materials for lithium-ion batteries V. n-SiO powder

X-ray photoelectron spectroscopy was used to analyze Si powders that have a native oxide surface, obtained from Paraclete Energy, Inc. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals with only minor nitrogen signal and show the expected oxidized carbon and silicon species related to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2023

Using electron energy-loss spectroscopy to measure nanoscale electronic and vibrational dynamics in a TEM

Electron energy-loss spectroscopy (EELS) can measure similar information to x-ray, UV–Vis, and IR spectroscopies but with atomic resolution and increased scattering cross-sections. Recent advances in electron monochromators have expanded EELS capabilities from chemical identification to the realms of synchrotron-level core-loss measurements and to low-loss, 10–100 meV excitations, such as phonons, excitons, and valence structures. EELS measurements are easily correlated with electron diffraction and atomic-scale real-space imaging in a transmission electron microscope (TEM) to provide detailed local pictures of quasiparticle and bonding states. This perspective provides an overview of existing high-resolution EELS (HR-EELS) capabilities while also motivating the powerful next step in the field—ultrafast EELS in a TEM. Ultrafast EELS aims to combine atomic-level, element-specific, and correlated temporal measurements to better understand spatially specific excited-state phenomena. Ultrafast EELS measurements also add to the abilities of steady-state HR-EELS by being able to image the electromagnetic field and use electrons to excite photon-forbidden and momentum-specific transitions. We discuss the technical challenges ultrafast HR-EELS currently faces, as well as how integration with in situ and cryo measurements could expand the technique to new systems of interest, especially molecular and biological samples.

Chemistry↗
DOE OSTI2021

Strain and ligand effects in Pt-Ni alloys studied by valence-to-core X-ray emission spectroscopy

Experimental detection of the Pt 5d densities of states in the valence band is conducted on a series of Pt-Ni alloys by high energy resolution valence-to-core X-ray emission spectroscopy (VTC-XES) at the Pt L 3 -edge. VTC-XES measurements reveal that the Pt d-band centroid shifts away from the Fermi level upon dilution, accompanied by concentration-dependent Pt d-band width. The competition between the strain effect and ligand effect is observed experimentally for the first time. It is found that the d-band widths in Pt 3 Ni and PtNi are broader than that of Pt metal due to compressive strain which overcompensates the effect of dilution, while it is narrower in PtNi 3 where the ligand effect dominates. VTC-XES is demonstrated to be a powerful tool to study the Pt d-band contribution to the valence band of Pt-based bimetallic. The implication for the enhanced activity of Pt-Ni catalysts in oxygen reduction reaction is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Spin-selective evolution of the Zhang-Rice state in binary transition metal oxide MnO(001) film

Here, the Zhang-Rice (ZR) state is a strongly hybridized bound state formed by transition-metal and oxygen atoms. The spin fluctuations within the ZR state are known to play an important role in high-T c superconductivity in cuprates. Here, we employ a combination of angle-resolved photoemission spectroscopy (ARPES), x-ray photoemission spectroscopy (XPS), and ab initio embedded dynamical mean-field theory (eDMFT) to investigate the influence of magnetic ordering on the spectral characteristics of the valence band and Mn 2⁢p core-level in MnO (001) ultrathin films. Our results demonstrate that a complex spin-selective evolution of Mn 3⁢d-O2⁢p hybridization develops due to the long-range antiferromagnetic (AFM) ordering. This hybridization significantly alters the spectral shape and weight of the ZR state. Specifically, in the AFM phase, we observed the sharpening of the ZR state and band folding with the periodicity of the AFM unit cell of MnO(001). We also demonstrated a strong connection between the spectral evolution of the ZR state and the non-local screening channels of the photoexcited core holes. Further, our detailed temperature-dependent study reveals the presence of short-range antiferromagnetic correlations that exist at much higher temperatures than Neel temperature (T N ) and shows the evolution of the ZR state across the magnetic transitions and its implication to the core-hole screening in 3⁢d binary transition metal oxides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Core-excited states of SF 6 probed with soft-x-ray femtosecond transient absorption of vibrational wave packets

A vibrational wavepacket in SF 6 is created by impulsive stimulated Raman scattering with a few-cycle infrared pulse and mapped simultaneously onto five sulfur core-excited states using table-top soft x-ray transient absorption spectroscopy between 170 to 200 eV. The femtosecond vibrations induce real-time energy shifts of the x-ray absorption, whose amplitude depend strongly on the nature of the core-excited state. The pump laser intensity is used to control the number of vibrational states in the superposition, thereby accessing core-excited levels for various extensions of the S-F stretching motion. This enables the determination of the relative core-level potential energy gradients for the symmetric stretching mode, in good agreement with TDDFT calculations. This experiment demonstrates a new means of characterizing core-excited potential energy curves.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2020

Si-based materials for lithium-ion batteries I: Surface-modified Si/C powder

X-ray photoelectron spectroscopy was used to analyze Si/C powder obtained from Paraclete Energy, Inc. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.834 01 nm). An initial survey spectrum together with O 1s, C 1s, and Si 2p are presented. A final survey spectrum was collected to ascertain the amount of beam-induced damage, which appears to be minimal. Finally, the spectra indicate the principal core level photoelectron and Auger electron signals and show the expected silicon-carbon species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

25 ENERGY STORAGE↗
DOE OSTI2021

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 3c Raw Data

XPS after 0hr of chronoampometry. Surface chemical composition and valence band structure of GaN were obtained by X-ray photoemission spectroscopy (XPS) on a Kratos Axis Ultra DLD system at a takeoff angle of 0° relative to the surface normal. An Al Kα source (hν = 1486.6 eV) was used to excite the core level electrons. Pass energy of 20 eV was used for the narrow scan of core levels and valence band spectra, and step size of 0.05 eV and 0.025 eV, respectively. The Spectral fitting was conducted using CasaXPS analysis software. The binding energy scales of all core levels were corrected to the N 1s of Ga – N bond at 397.8 eV. XPS O1s core level spectra from as-received Si/GaN sample, and deconvolution shows O - Ga bond and OH - H2O bond.

photocathode↗
DOE OSTI2021

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 3f Raw Data

XPS of Si/GaN photocathode after 10 hour chronoamperometry (CA) testing. Surface chemical composition and valence band structure of GaN were obtained by X-ray photoemission spectroscopy (XPS) on a Kratos Axis Ultra DLD system at a takeoff angle of 0° relative to the surface normal. An Al Kα source (hν = 1486.6 eV) was used to excite the core level electrons. Pass energy of 20 eV was used for the narrow scan of core levels and valence band spectra, and step size of 0.05 eV and 0.025 eV, respectively. The Spectral fitting was conducted using CasaXPS analysis software. The binding energy scales of all core levels were corrected to the N 1s of Ga – N bond at 397.8 eV. XPS O1s core level spectra from 10 hours CA tested Si/GaN sample, and deconvolution shows O - Ga bond, O - N - Ga bond and OH - H2O bond.

photocathode↗
DOE OSTI2021

Photoelectrochemically Self Improving Si/GaN Photocathode: Figure 3e Raw Data

XPS of Si/GaN photocathode after 4 hour chronoamperometry (CA) testing. Surface chemical composition and valence band structure of GaN were obtained by X-ray photoemission spectroscopy (XPS) on a Kratos Axis Ultra DLD system at a takeoff angle of 0° relative to the surface normal. An Al Kα source (hν = 1486.6 eV) was used to excite the core level electrons. Pass energy of 20 eV was used for the narrow scan of core levels and valence band spectra, and step size of 0.05 eV and 0.025 eV, respectively. The Spectral fitting was conducted using CasaXPS analysis software. The binding energy scales of all core levels were corrected to the N 1s of Ga – N bond at 397.8 eV. XPS O1s core level spectra from 4 hour CA tested Si/GaN sample, and deconvolution shows O - Ga bond, O - N - Ga bond and OH - H2O bond.

photocathode↗
DOE OSTI2025

First-Principles-Based Study of the Decomposition of Phenol and Hydroquinone on Pt(111) Combined with Quantitative Information from XPS Spectra to Address the Impact of Coverage and Number of Hydroxyl Functional Groups

A combined first-principles-based and experimental X-ray photoelectron spectroscopy approach was used to investigate the thermal decomposition of two model biofuel compounds, phenol and hydroquinone, on Pt(111) at both low and high coverages. The DFT-based approach yields adsorption geometries and energies, activation barriers and core-level binding energy shifts for C 1s and O 1s. Increasing the coverage in the theoretical model leads to slight shifts in core-level binding energies─toward higher values for C 1s and lower values for O 1s. It also alters the energy profiles of the decomposition reaction pathway, resulting in weaker adsorption energies and changes in both reaction and activation barriers. At low temperatures, we observe a multilayer for phenol and hydroquinone upon adsorption, with desorption occurring at 200 and 270 K, respectively. Following desorption of the multilayer, decomposition proceeds via initial O–H bond scission, followed by two parallel pathways involving either C–H or C–C bond scission, whereby in the case of phenol C–H bond scission occurs first. Here, we further provide characteristic core level binding energies by theoretical calculations that are subsequently used in experimental analyses, establishing a reference database for key spectra of phenolic functionalities applicable to a range of catalytic reactions.

09 BIOMASS FUELS↗
DOE OSTI2020

Reactivity of a Zirconia–Copper Inverse Catalyst for CO 2 Hydrogenation

Copper–zirconia catalysts have been shown to be effective for methanol synthesis via CO 2 hydrogenation, yet the active phases and reaction mechanism remain uncertain. Here, an inverse model catalyst ZrO 2 /CuO 2 /Cu(111) was prepared by mass-selected ion deposition and tested for CO 2 hydrogenation under near-ambient pressure (AP) reaction conditions by using X-ray photoelectron spectroscopy (NAP-XPS) and infrared reflection–absorption spectroscopy (NAP-IRAS). The spatial resolution afforded by the small entrance cone of the AP-XPS spectrometer was used to resolve regions of the surface with and without Zr deposition. Carbon 1s core level spectra of the ZrO 2 /Cu 2 O/Cu(111) regions of the surface under 500 mTorr of CO 2 + H 2 (1:3 ratio) show evidence for reaction intermediates including carbonate (CO 3 *), formate (HCOO*), and H x CO* species, with methoxy having the highest surface concentration at 500–600 K. These intermediates are confirmed by IRAS vibrational spectra. In regions of the surface without Zr, the Cu 2 O/Cu(111) is reduced to metallic Cu, and the surface intermediates are different and are present at much lower concentrations. The observed surface intermediates and their temperature dependence suggest a mechanism in which CO 2 is adsorbed on zirconia as carbonate (CO 3 *) and then converted to HCOO* and H x CO* hydrogenated intermediates that ultimately lead to methoxy (CH 3 O*), the final surface-bound precursor for methanol. Overall, the results clearly demonstrate the promotional effects of small ZrO 2 particles for enhancing the reactivity of Cu surfaces for CO 2 hydrogenation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Investigating the electronic structure of high explosives with X-ray Raman spectroscopy

Abstract We investigate the sensitivity and potential of a synergistic experiment-theory X-ray Raman spectroscopy (XRS) methodology on revealing and following the static and dynamic electronic structure of high explosive molecular materials. We show that advanced ab-initio theoretical calculations accounting for the core-hole effect based on the Bethe-Salpeter Equation (BSE) approximation are critical for accurately predicting the shape and the energy position of the spectral features of C and N core-level spectra. Moreover, the incident X-ray dose typical XRS experiments require can induce, in certain unstable structures, a prominent radiation damage at room temperature. Upon developing a compatible cryostat module for enabling cryogenic temperatures ( $$\approx$$ ≈ 10 K) we suppress the radiation damage and enable the acquisition of reliable experimental spectra in excellent agreement with the theory. Overall, we demonstrate the high sensitivity of the recently available state-of-the-art X-ray Raman spectroscopy capabilities in characterizing the electronic structure of high explosives. At the same time, the high accuracy of the theoretical approach may enable reliable identification of intermediate structures upon rapid chemical decomposition during detonation. Considering the increasing availability of X-ray free-electron lasers, such a combined experiment-theory approach paves the way for time-resolved dynamic studies of high explosives under detonation conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Si-based materials for lithium-ion batteries XI. 70% surface-modified Si/C/perfluorooctene-carbon black/lithiated polyacrylic acid electrode

X-ray photoelectron spectroscopy was used to analyze a 70% Si/C/perfluorooctene-carbon black/lithiated polyacrylic acid electrode fabricated at the Cell Analysis, Modeling, and Prototyping (CAMP) Facility, Argonne National Laboratory. The spectra were obtained using incident monochromatic Al K α radiation at 1486.6 eV (0.83 401 nm). A survey spectrum together with O 1s, C 1s, and Si 2p are presented. The spectra indicate the principal core level photoelectron and Auger electron signals with only minor sodium, copper, calcium, and lithium signals and show the expected silicon-carbon, carbon-fluorine, and silicon-fluorine species related to the surface modification process in addition to oxidized carbon and silicon due to atmospheric exposure.

25 ENERGY STORAGE↗