Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cooling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

The evolution of cooling flows - Self-similar cooling waves

Similarity solutions are presented for the time-dependent evolution of cooling flows. A cooling flow expands when the cooling time computed from the initial gas distribution increases with radius. If certain simplifying conditions are met, the evolution of the resulting cooling wave becomes self-similar. The similarity solutions obtained here assumed subsonic flow, which is valid in the outer parts of observed cooling flows; they are matched to transonic accretion solutions valid in the central parts. The models are applied to the cooling flow onto M87, with unsatisfactory agreement at small radius. A local linear stability analysis shows that the similarity solution suffers isobaric thermal instability, suggesting that the neglect of star formation may be responsible for the poor agreement. The similarity solution suggests that the cooling flow around M87 was more vigorous in the past.

Bertschinger, Edmund↗

Correction of Temperatures of Air-Cooled Engine Cylinders for Variation in Engine and Cooling Conditions

Factors are obtained from semiempirical equations for correcting engine-cylinder temperatures for variation in important engine and cooling conditions. The variation of engine temperatures with atmospheric temperature is treated in detail, and correction factors are obtained for various flight and test conditions, such as climb at constant indicated air speed, level flight, ground running, take-off, constant speed of cooling air, and constant mass flow of cooling air. Seven conventional air-cooled engine cylinders enclosed in jackets and cooled by a blower were tested to determine the effect of cooling-air temperature and carburetor-air temperature on cylinder temperatures. The cooling air temperature was varied from approximately 80 degrees F. to 230 degrees F. and the carburetor-air temperature from approximately 40 degrees F. to 160 degrees F. Tests were made over a large range of engine speeds, brake mean effective pressures, and pressure drops across the cylinder. The correction factors obtained experimentally are compared with those obtained from the semiempirical equations and a fair agreement is noted.

Schey, Oscar W↗

The problem of cooling an air-cooled cylinder on an aircraft engine

An analysis of the cooling problem has been to show by what means the cooling of an air-cooled aircraft engine may be improved. Each means of improving cooling is analyzed on the basis of effectiveness in cooling with respect to power for cooling. The altitude problem is analyzed for both supercharged and unsupercharged engines. The case of ground cooling is also discussed. The heat-transfer process from the hot gases to the cylinder wall is discussed on the basis of the fundamentals of heat transfer and thermodynamics. Adiabatic air-temperature rise at a stagnation point in compressible flow is shown to depend only on the velocity of flow.

Brevoort, M J↗

Air-Cooled Turbine Blades with Tip Cap For Improved Leading-Edge Cooling

An investigation was conducted in a modified turbojet engine to determine the cooling characteristics of the semistrut corrugated air- cooled turbine blade and to compare and evaluate a leading-edge tip cap as a means for improving the leading-edge cooling characteristics of cooled turbine blades. Temperature data were obtained from uncapped air-cooled blades (blade A), cooled blades with the leading-edge tip area capped (blade B), and blades with slanted corrugations in addition to leading-edge tip caps (blade C). All data are for rated engine speed and turbine-inlet temperature (1660 F). A comparison of temperature data from blades A and B showed a leading-edge temperature reduction of about 130 F that could be attributed to the use of tip caps. Even better leading-edge cooling was obtained with blade C. Blade C also operated with the smallest chordwise temperature gradients of the blades tested, but tip-capped blade B operated with the lowest average chordwise temperature. According to a correlation of the experimental data, all three blade types 0 could operate satisfactorily with a turbine-inlet temperature of 2000 F and a coolant flow of 3 percent of engine mass flow or less, with an average chordwise temperature limit of 1400 F. Within the range of coolant flows investigated, however, only blade C could maintain a leading-edge temperature of 1400 F for a turbine-inlet temperature of 2000 F.

Calvert, Howard F.↗

Structural cooling fluid tube for supporting a turbine component and supplying cooling fluid to transition section

A shaft cover support for a gas turbine engine is disclosed. The shaft cover support not only provides enhanced support to a shaft cover of the gas turbine engine, but also includes a cooling fluid chamber for passing fluids from a rotor air cooling supply conduit to an inner ring cooling manifold. Furthermore, the shaft cover support may include a cooling shield supply extending from the cooling fluid chamber between the radially outward inlet and the radially inward outlet on the radially extending region and in fluid communication with the cooling fluid chamber for providing cooling fluids to a transition section. The shaft cover support may also provide additional stiffness and reduce interference of the flow from the compressor. In addition, the shaft cover support accommodates a transition section extending between compressor and turbine sections of the gas turbine engine.

33 ADVANCED PROPULSION SYSTEMS↗

Turbine airfoil with leading edge cooling passage(s) coupled via plenum to film cooling holes, and related method

A turbine airfoil includes a body including a wall defining pressure and suction sides, and a leading edge extending between the pressure and suction sides. A cooling circuit inside the wall of the body includes at least one of: a) a suction side to pressure side cooling sub-circuit including a first cooling passage(s) extending from the suction side to the pressure side around the leading edge to a first plenum, and a plurality of first film cooling holes communicating with the first plenum and extending through the wall on the pressure side; and b) a pressure side to suction side cooling sub-circuit including second cooling passage(s) extending from the pressure side to the suction side around the leading edge to a second plenum, and a plurality of second film cooling holes communicating with the second plenum and extending through the wall on the suction side.

Lacy, Benjamin Paul↗

Supernova cooling in a dark matter smog

A light hidden gauge boson with kinetic mixing with the usual photon is a popular setup in theories of dark matter. The supernova cooling via radiating the hidden boson is known to put an important constraint on the mixing. I consider the possible role dark matter, which under reasonable assumptions naturally exists inside supernova, can play in the cooling picture. Because the interaction between the hidden gauge boson and DM is likely unsuppressed, even a small number of dark matter compared to protons inside the supernova could dramatically shorten the free streaming length of the hidden boson. A picture of a dark matter “smog” inside the supernova, which substantially relaxes the cooling constraint, is discussed in detail.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Twin-Helix Channel for Parametric-Resonance Ionization Cooling

Parametric-resonance Ionization Cooling (PIC)[1-3] is envisioned as the final 6D cooling stage of a high-luminosity muon collider. Implementing PIC imposes stringent constraints on the cooling channel's magnetic optics design. This paper presents a linear optics solution compatible with PIC. Our solution consists of a superposition of two opposite-helicity equal-period and equal-strength helical dipole harmonics and a straight normal quadrupole. We demonstrate that such a system can be adjusted to meet all of the PIC linear optics requirements while retaining large acceptance.

43 PARTICLE ACCELERATORS↗

Dependence of the residual surface resistance of superconducting radio frequency cavities on the cooling dynamics around T{sub c}

We report a strong effect of the cooling dynamics through T{sub c} on the amount of trapped external magnetic flux in superconducting niobium cavities. The effect is similar for fine grain and single crystal niobium and all surface treatments including electropolishing with and without 120 °C baking and nitrogen doping. Direct magnetic field measurements on the cavity walls show that the effect stems from changes in the flux trapping efficiency: slow cooling leads to almost complete flux trapping and higher residual resistance, while fast cooling leads to the much more efficient flux expulsion and lower residual resistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Encapsulant Properties on the Thermo-Mechanical Reliability of Double-Side Cooled Power Modules for Traction Inverters

Double-side cooled power modules are being developed for next-generation traction inverters due to their better heat extraction, lower profile, and lower parasitic inductances. However, due to their rigid structure, they cause reliability concerns arising from high thermo-mechanical stresses at the interconnection joints in the module. In this work, a materials-based approach using rigid encapsulants is presented for reducing thermo-mechanical fatigue. Finite-element thermo- mechanical simulations were performed to examine the effects of the elastic modulus and coefficient of thermal expansion of epoxy- based encapsulants on the bond deformation inside a double-side cooled power module. It was found that a rigid encapsulant with a high modulus of 6.0 GPa or above and a coefficient of thermal expansion around 20 ppm/oC would improve the thermo- mechanical reliability of double-side cooled power modules by decreasing the permanent bond deformation inside the modules by 50-60%.

ADVANCED PROPULSION SYSTEMS↗

Analysis of Turbine Blade Relative Cooling Flow Factor Used in the Subroutine Coolit Based on Film Cooling Correlations

Heat transfer correlations of data on flat plates are used to explore the parameters in the Coolit program used for calculating the quantity of cooling air for controlling turbine blade temperature. Correlations for both convection and film cooling are explored for their relevance to predicting blade temperature as a function of a total cooling flow which is split between external film and internal convection flows. Similar trends to those in Coolit are predicted as a function of the percent of the total cooling flow that is in the film. The exceptions are that no film or 100 percent convection is predicted to not be able to control blade temperature, while leaving less than 25 percent of the cooling flow in the convection path results in nearing a limit on convection cooling as predicted by a thermal effectiveness parameter not presently used in Coolit.

Air cooling↗

Three Stage Cool Flame Droplet Burning Behavior of n-Alkane Droplets at Elevated Pressure Conditions: Hot, Warm and Cool Flame

Transient, isolated n-alkane droplet combustion is simulated at elevated pressure for helium-diluent substituted-air mixtures. We report the presence of unique quasi-steady, three-stage burning behavior of large sphero-symmetric n-alkane droplets at these elevated pressures and helium substituted ambient fractions. Upon initiation of reaction, hot-flame diffusive burning of large droplets is initiated that radiatively extinguishes to establish cool flame burning conditions in nitrogen/oxygen “air” at atmospheric and elevated pressures. However, at elevated pressure and moderate helium substitution for nitrogen ( X He > 20%), the initiated cool flame burning proceeds through two distinct, quasi-steady-state, cool flame burning conditions. The classical “Hot flame ” ( ∼1500 K) radiatively extinguishes into a “Warm flame ” burning mode at a moderate maximum reaction zone temperature ( ∼ 970 K), followed by a transition to a lower temperature ( ∼765 K), quasi-steady “Cool flame ” burning condition. The reaction zone (“flame”) temperatures are associated with distinctly different yields in intermediate reaction products within the reaction zones and surrounding near-field, and the flame-standoff ratios characterizing each burning mode progressively decrease. The presence of all three stages first appears with helium substitution near 20%, and the duration of each stage is observed to be strongly dependent on helium substitutions level between 20–60%. For helium substitution greater than 60%, the hot flame extinction is followed by only the lower temperature cool flame burning mode. In addition to the strong coupling between the diffusive loss of both energy and species and the slowly evolving degenerate branching in the low and negative temperature coefficient (NTC) kinetic regimes, the competition between the low-temperature chain branching and intermediate-temperature chain termination reactions control the “Warm” and “Cool ” flame quasi-steady conditions and transitioning dynamics.

Droplet Combustion↗

Preconceptual design of a fluoride high temperature salt-cooled engineering demonstration reactor: Core design and safety analysis

Engineering demonstration reactors are nuclear reactors built to establish proof of concept for technology options that have never been built. Examples of engineering demonstration reactors include Peach Bottom 1 for high temperature gas-cooled reactors (HTGRs) and Experimental Breeder Reactor II (EBR-II) for sodium-cooled fast reactors. Engineering demonstrations have historically played a vital role in advancing the technology readiness level of reactor technologies. This paper details a preconceptual design for a fluoride salt-cooled engineering demonstration reactor. The fluoride salt-cooled high-temperature reactor (FHR) demonstration reactor (DR) is a concept for a salt-cooled reactor with 100 megawatts of thermal output (MWt). It would use tristructural-isotropic (TRISO) particle fuel within prismatic graphite blocks. FLiBe (2 7LiF-BeF2) is the reference primary coolant. The FHR DR is designed to be small, simple, and affordable. Core design characteristics, fuel cycle performance, and safety analysis of the FHR DR preconcept have been evaluated. The FHR DR core design features a negative or negligible void coefficient throughout a reactor operating cycle. Both single-batch (cartridge) and multiple-batch fuel cycles can be demonstrated in the FHR DR. The single-batch cycle length of the FHR DR core is estimated at between 12-18 months, assuming the successful qualification of composite carbon (C/C) or silicon carbide (SiC/SiC) structural fuel block tie rod material. Fuel cycle performance of the FHR DR is similar to a high temperature gas-cooled reactor. Preliminary safety analysis of the FHR DR indicates that the reactor could be used to demonstrate the inherent safety characteristics of FHR designs.

Brown, Nicholas R.↗

Systematic Comparison of the Influence of Cool Wall versus Cool Roof Adoption on Urban Climate in the Los Angeles Basin

This study for the first time assesses the influence of employing solar reflective “cool” walls on the urban energy budget and summertime climate of the Los Angeles basin. Here, we systematically compare the effects of cool walls to cool roofs, a heat mitigation strategy that has been widely studied and employed, using a consistent modeling framework (the Weather Research and Forecasting model). Adoption of cool walls leads to increases in urban grid cell albedo that peak in the early morning and late afternoon, when the ratio of solar radiation onto vertical walls versus horizontal surfaces is at a maximum. In Los Angeles County, daily average increase in grid cell reflected solar radiation from increasing wall albedo by 0.80 is 9.1 W m –2 , 43% of that for increasing roof albedo. Cool walls reduce canyon air temperatures in Los Angeles by 0.43 K (daily average), with the peak reduction (0.64 K) occurring at 09:00 LST and a secondary peak (0.53 K) at 18:00 LST. Per 0.10 wall (roof) albedo increase, cool walls (roofs) can reduce summertime daily average canyon air temperature by 0.05 K (0.06 K). Results reported here can be used to inform policies on urban heat island mitigation or climate change adaptation.

54 ENVIRONMENTAL SCIENCES↗

Demonstration of cooling by the Muon Ionization Cooling Experiment

The use of accelerated beams of electrons, protons or ions has furthered the development of nearly every scientific discipline. However, high-energy muon beams of equivalent quality have not yet been delivered. Muon beams can be created through the decay of pions produced by the interaction of a proton beam with a target. Such ‘tertiary’ beams have much lower brightness than those created by accelerating electrons, protons or ions. High-brightness muon beams comparable to those produced by state-of-the-art electron, proton and ion accelerators could facilitate the study of lepton–antilepton collisions at extremely high energies and provide well characterized neutrino beams. Such muon beams could be realized using ionization cooling, which has been proposed to increase muon-beam brightness. Here we report the realization of ionization cooling, which was confirmed by the observation of an increased number of low-amplitude muons after passage of the muon beam through an absorber, as well as an increase in the corresponding phase-space density. The simulated performance of the ionization cooling system is consistent with the measured data, validating designs of the ionization cooling channel in which the cooling process is repeated to produce a substantial cooling effect. The results presented here are an important step towards achieving the muon-beam quality required to search for phenomena at energy scales beyond the reach of the Large Hadron Collider at a facility of equivalent or reduced footprint.

43 PARTICLE ACCELERATORS↗

A NEW DIAGNOSTIC OF MAGNETIC FIELD STRENGTHS IN RADIATIVELY COOLED SHOCKS

We show that it is possible to measure Alfvénic Mach numbers, defined as the shock velocity in the flow divided by the Alfvén velocity, for low-velocity (V{sub shock} ≲ 100 km s{sup −1}) radiative shocks. The method combines observations of bright forbidden lines with a measure of the size of the cooling zone, the latter typically obtained from spatial separation between the Balmer emission lines and the forbidden lines. Because magnetic fields become compressed as gas in the postshock region cools, even relatively weak preshock magnetic fields can be detected with this method. We derive analytical formulae that explain how the spatial separations relate to emission-line ratios, and compute a large grid of radiatively cooled shock models to develop diagnostic diagrams that can be used to derive Alfvénic Mach numbers in flows. Applying the method to existing data for a bright knot in the HH 111 jet, we obtain a relatively low Alfvénic Mach number of ∼2, indicative of a magnetized jet that has super-magnetosonic velocity perturbations within it.

79 ASTRONOMY AND ASTROPHYSICS↗

Fabrication of Bi{sub 2}Te{sub 3}/Sb{sub 2}Te{sub 3} and Bi{sub 2}Te{sub 3}/Bi{sub 2}Te{sub 2}Se multilayered thin film-based integrated cooling devices

In this article, the authors report on the development of solid-state integrated cooling devices using Bi{sub 2}Te{sub 3}/Sb{sub 2}Te{sub 3} and Bi{sub 2}Te{sub 3}/Bi{sub 2}Te{sub 2}Se thermoelectric thin films fabricated using sputtering deposition. The multilayer thin films have a periodic structure consisting of alternating Bi{sub 2}Te{sub 3} and Sb{sub 2}Te{sub 3} layers or Bi{sub 2}Te{sub 3} and Bi{sub 2}Te{sub 2}Se layers, where each layer is about 10 nm thick. The deposited Bi{sub 2}Te{sub 3}/Sb{sub 2}Te{sub 3} multilayer thin film has a p-type conductivity and the deposited Bi{sub 2}Te{sub 3}/Bi{sub 2}Te{sub 2}Se multilayer thin film has an n-type conductivity. The multilayer structure of films and the interface of layers were analyzed by x-ray diffraction and reflectivity. Bi{sub 2}Te{sub 3}/Sb{sub 2}Te{sub 3} and Bi{sub 2}Te{sub 3}/Bi{sub 2}Te{sub 2}Se multilayer thin film-based integrated cooling devices were fabricated using standard integrated circuit fabrication process. The temperature difference was measured from the fabricated cooling devices. The devices could be good candidates for the application of high-efficiency solid-state microcooling.

36 MATERIALS SCIENCE↗

Laser cooling of ions in a neutral plasma

Laser cooling of a neutral plasma is a challenging task because of the high temperatures typically associated with the plasma state. By using an ultracold neutral plasma created by photoionization of an ultracold atomic gas, we avoid this obstacle and demonstrate laser cooling of ions in a neutral plasma. After 135 microseconds of cooling, we observed a reduction in ion temperature by up to a factor of four, with the temperature reaching as low as 50(4) millikelvin. This pushes laboratory studies of neutral plasmas deeper into the strongly coupled regime, beyond the limits of validity of current kinetic theories for calculating transport properties. The same optical forces also retard the plasma expansion, opening avenues for neutral-plasma confinement and manipulation.

Science & Technology - Other Topics↗