Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Configuration interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

The dissociation energy of Cu2 - Do we want to perform multi-reference singles and doubles CIs on many-electron systems?

Reference is made to a study by Hay and Dunning (1976), who showed that, for most problems, it is not necessary to perform full FOCI (first order configuration interaction); instead, only that subset of configuration state functions (CSFs) that differ by only one or two spin orbitals from any of a list of reference configurations need be used. This is referred to as POLCI. Calculations of the D(e) of Cu2 using both SDCI (singles and doubles configuration interaction) and POLCI models are presented. It is found that the size-consistency problems associated with SDCI cause an error in D(e), whereas the POLCI results are in excellent agreement with experiment. It is proposed that the orbitals be classified as inactive and active and that the inactive-inactive correlation be eliminated to reduce the size-consistency error. In addition, it is recommended that SDCI treatments be applied with caution to systems having a large number of electrons.

Bauschlicher, C. W., Jr.↗

Assessment of DFT functionals for a minimal nitrogenase [Fe(SH) 4 H]- model employing state-of-the-art ab initio methods

We have designed a [Fe(SH)4H]- model with the fifth proton binding either to Fe or S. We show that the energy difference between these two isomers (ΔE) is hard to estimate with quantum-mechanical (QM) methods. For example, different density functional theory (DFT) methods give ΔE estimates that vary by almost 140 kJ/mol, mainly depending on the amount of exact Hartree–Fock included (0%–54%). The model is so small that it can be treated by many high-level QM methods, including coupled-cluster (CC) and multiconfigurational perturbation theory approaches. With extrapolated CC series (up to fully connected coupled-cluster calculations with singles, doubles, and triples) and semistochastic heat-bath configuration interaction methods, we obtain results that seem to be converged to full configuration interaction results within 5 kJ/mol. Our best result for ΔE is 101 kJ/mol. With this reference, we show that M06 and B3LYP-D3 give the best results among 35 DFT methods tested for this system. Brueckner doubles coupled cluster with perturbaitve triples seems to be the most accurate coupled-cluster approach with approximate triples. CCSD(T) with Kohn–Sham orbitals gives results within 4–11 kJ/mol of the extrapolated CC results, depending on the DFT method. Single-reference CC calculations seem to be reasonably accurate (giving an error of ~5 kJ/mol compared to multireference methods), even if the D1 diagnostic is quite high (0.25) for one of the two isomers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical study of the dipole moment of oxygen monofluoride (OF)

The ground-state potential curve and dipole-moment function of OF are calculated theoretically using the complete active-space self-consistent-field levels, externally contracted configuration-interaction levels, or multireference (singles plus doubles) configuration-interaction levels. Both an extended Gaussian basis set and a double-zeta-plus-polarization basis set were applied. The results are presented in extensive tables and graphs. Best results are achieved using a large Gaussian basis set and taking the valence-correlation energy into account. It is suggested that OF may best be detected by its laser-magnetic-resonance spectrum in the IR.

Langhoff, S. R.↗

Structure and thermochemistry of ClO2 radicals

The structure of ClO2 has been calculated for the X 2A-double prime ground state using unrestricted Hartree-Fock (UHF), unrestricted second-order Moller-Plesset perturbation (UMP2), configuration interaction employing single and double excitation (CISD), and quadratic configuration interaction (QCI) ab initio molecular orbital methods. Calculations using UMP2 and CISD wave functions predict a ClO bond length of 1.728 +/- 0.01 A. The single-configuration-based QCI in the singles and doubles space with perturbation inclusion of triple substitutions, denoted QCISD(T), yield a ClO bond length of 2.205 A. The QCI results are consistent with results of Jensen (1990) who showed that the ClO bond length is 2.181 A using annihilated self-consistent methods (AUMP2). The thermochemistry of ClO2 radical has been calculated using MP2 and QCI methods employing an isodesmic scheme. Our scheme predicts the heat of formation for ClO2 at 0 K to be 24.6 +/- 2 kcal/mol.

Francisco, J. S.↗

Research on Spectroscopy, Opacity, and Atmospheres

I propose to continue providing observers with basic data for interpreting spectra from stars, novas, supernovas, clusters, and galaxies. These data will include allowed and forbidden line lists, both laboratory and computed, for the first five to ten ions of all atoms and for all relevant diatomic molecules. I will eventually expand to all ions of the first thirty elements to treat far UV and X-ray spectra, and for envelope opacities. I also include triatomic molecules provided by other researchers. I have also made CDs with Partridge and Schwenke's water data for work on UV stars. The line data also serve as input to my model atmosphere and synthesis programs that generate energy distributions, photometry, limb darkening, and spectra that can be used for planning observations and for fitting observed spectra. The spectrum synthesis programs produce detailed plots with the lines identified. Grids of stellar spectra can be used for radial velocity-, rotation-, or abundance templates and for population synthesis. I am fitting spectra of bright stars to test the data and to produce atlases to guide observers. For each star the whole spectrum is computed from the UV to the far IR. The line data, opacities, models, spectra, and programs are freely distributed on CDs and on my Web site and represent a unique resource for many NASA programs. I am now in full production of new line lists for atoms. I am computing all ions of all elements from H to Zn and the first 5 ions of all the heavier elements, about 800 ions. For each ion I treat as many as 61 even and 61 odd configurations, computing all energy levels and eigenvectors. The Hamiltonian is determined from a scaled-Hartree-Fock starting guess by least squares fitting the observed energy levels. The average energy of each configuration is used in computing scaled-Thomas-Fermi-Dirac wavefunctions for each configuration which in turn are used to compute allowed and forbidden transition integrals. These are multiplied into the LS allowed and forbidden transition arrays. The transition arrays are transformed to the observed coupling to yield the allowed and forbidden line lists. Results are put on the web as they are finished. Provided I get funding,there will be more than 500 million lines. I will then compare ion by ion, to all the laboratory and computed data in the literature and make up a working line list for spectrum synthesis and opacity calculations with the best available data. As the laboratory spectrum analyses are improved, I will redo the calculations with the new energy levels. My original plan when I started the new calculations was to run through all the atoms using my old Cray programs from the 1980's that were limited to 1100 x 1100 arrays in the Hamiltonian for each J. Then I would go back and rerun the more complicated cases with 3000 x 3000 arrays so that I could include many more configurations and more configuration interactions. At present I am limited to 61 even and 61 odd configurations and I try to include everything up through n = 9. The current program runs on Alpha workstations. I decided to test the big program on Fe I and Fe II to see whether there was any great difference in the low configurations compared to those from the Cray program. Besides increasing the number of E1 lines by a factor of 6 to 7.7 million, there was an unexpected result: the electric quadrupole transitions were 10 times stronger than before because the transition integrals are weighted by r(exp 2) ---they become very large for high n, and because there are numerous configuration interactions that mix the low and high configurations. As a check I was able to reproduce Carstang's (1962) lower results by running his three configurations with my program. Since my model atom is still only a subset of a real Fe II ion, the true quadrupole A values are probably larger than mine. The magnetic dipole lines are affected by the mixing but the overall scale does not change. Because of this scovery I decided that there was no point in computing the small array cases. I have been running with as many configurations as I can and with thousands of parameters in the Hamiltonian. The computer runs take much longer to set up and produce than I had expected. I have concentrated on redoing the low iron group spectra, especially to get data for supernova modelers. I have done only Ca I -- Zn I, Ca II -- Zn II, CU I -- Cu XXIX, Zn I - Zn XXX, for practice at high stages of ionization, C I, C II, S I, and CL I and Ag I for people who were working on the laboratory spectra. Check my web site kurucz.harvard.edu for current additions. My latest calculations have been for carbon I and sulphur I, and silicon I is under way using the same elaborate approach as for C I, which took many months to do. These line lists greatly increase the number of lines in the ultraviolet, in the visible, and especially in the infrared. They will increase the opacity in A, F, and G stars. They will account for many unidentified lines in the sun.

Kurucz, Robert L.↗

Theoretical level energies, radiative lifetimes and transitions in W IX

The atomic states of the W IX (W{sup 8+}) tungsten ion lying below the W{sup 9+} ionisation threshold have been studied theoretically, employing the multiconfiguration Dirac–Hartree–Fock method with configuration interaction. The level electronic structures and their energies are presented. The electric dipole (E1), magnetic dipole (M1), electric quadrupole (E2), and magnetic quadrupole (M2) radiative transitions have been computed in order to calculate the radiative lifetimes of given states. Transition wavelengths, energies, and decay rates are also presented for selected high-intensity E1 transitions. The configuration interaction method was applied to estimate electron correlation effects. The aim of the present research was to fill a lack of atomic data for low-charged tungsten ions, which may be useful in low-temperature plasma diagnostics and may form the base for collisional–radiative modelling of spectra for low-charged tungsten ions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A modified coupled pair functional approach

A modified coupled pair functional (CPF) method is presented for the configuration interaction problem that dramatically improves properties for cases where the Hartree-Fock reference configuration is not a good zeroth-order wave function description. It is shown that the tendency for CPF to overestimate the effect of higher excitations arises from the choice of the geometric mean for the partial normalization denominator. The modified method is demonstrated for ground state dipole moment calculations of the NiH, CuH, and ZnH transition metal hydrides, and compared to singles-plus-doubles configuration interaction and the Ahlrichs et al. (1984) CPF method.

Chong, D. P.↗

An ab initio study of the C3(+) cation using multireference methods

The energy difference between the linear 2 sigma(sup +, sub u) and cyclic 2B(sub 2) structures of C3(+) has been investigated using large (5s3p2d1f) basis sets and multireference electron correlation treatments, including complete active space self consistent fields (CASSCF), multireference configuration interaction (MRCI), and averaged coupled-pair functional (ACPF) methods, as well as the single-reference quadratic configuration interaction (QCISD(T)) method. Our best estimate, including a correction for basis set incompleteness, is that the linear form lies above the cyclic from by 5.2(+1.5 to -1.0) kcal/mol. The 2 sigma(sup +, sub u) state is probably not a transition state, but a local minimum. Reliable computation of the cyclic/linear energy difference in C3(+) is extremely demanding of the electron correlation treatment used: of the single-reference methods previously considered, CCSD(T) and QCISD(T) perform best. The MRCI + Q(0.01)/(4s2p1d) energy separation of 1.68 kcal/mol should provide a comparison standard for other electron correlation methods applied to this system.

Taylor, Peter R.↗

K-LL Auger transition probabilities for elements with low and intermediate atomic numbers

Radiationless K-LL transition probabilities have been calculated nonrelativistically in j-j coupling and in intermediate coupling, without and with configuration interaction, for elements with atomic numbers from 13 to 47. The system is treated as a coupled two-hole configuration. The single-particle radial wave functions required in the calculation of radial matrix elements, and in the calculation of mixing coefficients in the intermediate-coupling scheme, were obtained from Green's atomic independent-particle model. Comparison with previous theoretical work and with experimental data is made. The effects of intermediate coupling, configuration interaction, and relativity are noted.

Chen, M. H.↗

General purpose computer program for interacting supersonic configurations. User's manual

The input data required to execute the computer program ISCON are described. The program generates a numerical procedure for the determination of unsteady aerodynamic forces on arbitrarily interacting wings and tails in supersonic flow. A velocity potential gradient method is used. Constant Mach number is assumed throughout the flow field. Lifting surfaces are represented by trapezoidal elements which can be generated automatically by the program. The wake field is represented by rectangular strip elements. The formulation is reviewed as well as input overview and input format. Instruction on how to use ISCON, a sample problem, and the restart feature are discussed. Program size limitations, computer program flow, and error messages are also included along with a description of the SS31 program used to compute the coefficients of surface spline.

Crill, W.↗

An Ab Initio Electronic Structure Investigation of the Ground and Excited States of ScH + , YH + , and LaH +

Multireference configuration interaction (MRCI), Davidson-corrected MRCI (MRCI+Q), coupled-cluster singles, doubles, and perturbative triples [CCSD(T)], and frozen-core full configuration interaction (fcFCI) calculations were carried out using large, correlation-consistent basis sets to investigate the excited states of the Sc atom and the spin–free and spin–orbit coupled potential energy profiles, energetics, spectroscopic constants, and electron populations of low-lying states of MH + (M = Sc, Y, La). The core electron correlation effects, complete basis set effects, and spin–orbit coupling effects were also evaluated. The first four electronic states of all MH + are 1 2 Δ, 1 2 Σ + , 1 2 Π, and 2 2 Σ + with 1σ 2 1δ 1 , 1σ 2 2σ 1 , 1σ 2 1π 1 , and 1σ 2 3σ 1 single-reference electron configurations, respectively. These states of MH + can be represented by the M 2+ H – ionic structure. The ground states of ScH + , YH + , and LaH + are 1 2 Δ 3/2 , 1 2 Σ + 1/2 , and 1 2 Δ 3/2 with 55.45, 60.54, and 62.34 kcal/mol bond energies, respectively. The core electron correlation was found to be vital for gaining accurate predictions on the ground and excited state properties of MH + . The spin–orbit coupling effects are minor for ScH + but become substantial moving to YH + and LaH + . Overall, the results of this work are in good agreement with the limited set of experimental findings of MH + available in the literature and will be of use for future investigations. Furthermore, the theoretical approaches, findings, and trends reported here are expected to aid studies of similar species.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electron Correlation in 4-Component Relativistic Calculations

The full 4-component Dirac-Coulomb equation can nowadays be used in molecular calculations, The first step in solving this relativistic many-electron equation usually consists of solving the closed or open-shell Diarc-Fock equations. Like in non-relativistic calculations the outcome does not account for the effects of electron correlation. This can in principle be remedied by developing relativistic variants of electron correlation methods like Configuration Interaction or Coupled Cluster. In this talk the differences and similarities of such relativistic approaches as compared to non-relativistic methods will be reviewed. Results of Configuration Interaction calculations on the PtH molecule and on the MeF(sub 6, sup 2-) (Me= Co, Rh, Ir) complexes will be presented to give an impression of the kind of results that currently can be obtained.

Visscher, Luuk↗

The study of molecular spectroscopy by ab initio methods

This review illustrates the potential of theory for solving spectroscopic problems. The accuracy of approximate techniques for including electron correlation have been calibrated by comparison with full configuration-interaction calculations. Examples of the application of ab initio calculations to vibrational, rotational, and electronic spectroscopy are given. It is shown that the state-averaged, complete active space self-consistent field, multireference configuration-interaction procedure provides a good approach for treating several electronic states accurately in a common molecular orbital basis.

Bauschlicher, Charles W., Jr.↗

Evaluation of Early Ground Control Station Configurations for Interacting with a UAS Traffic Management (UTM) System

The purpose of this paper is to report on a human factors evaluation of ground control station design concepts for interacting with an unmanned traffic management system. The data collected for this paper comes from recent field tests for NASA's Unmanned Traffic Management (UTM) project, and covers the following topics; workload, situation awareness, as well as flight crew communication, coordination, and procedures. The goal of this evaluation was to determine if the various software implementations for interacting with the UTM system can be described and classified into design concepts to provide guidance for the development of future UTM interfaces. We begin with a brief description of NASA's UTM project, followed by a description of the test range configuration related to a second development phase. We identified (post hoc) two classes in which the ground control stations could be grouped. This grouping was based on level of display integration. The analysis was exploratory and informal. It was conducted to compare ground stations across those two classes and against the aforementioned topics. Herein, we discuss the results.

unmanned traffic management↗

Photodissociation of CH2. I - Potential energy surfaces of the dissociation into CH and H

The possible photodissociation pathways of the CH2 radical are studied using ab initio multireference configuration-interaction methods, and accurate photodissociation cross sections and branching ratios for the production of CH + H and C + H2 are obtained. Potential energy surfaces were calculated using the Wuppertal-Bonn self-consistent field plus a multireference single and double-excitation configuration interaction package of programs. Two-dimensional potential energy surfaces of the ten lowest triplet states correlating with the seven lowest states of CH were calculated as functions of bond angle and one C-H bond distance, keeping the other C-H bond distance fixed at the equilibrium CH2 value.

Bearda, Robert A.↗

Theoretical study of the dipole moment function of OH(X 2Pi)

A complete theoretical electric dipole moment function mu(r) is computed for OH(X 2Pi) at the full configuration-interaction (FCI) level for DZP + diffuse Gaussian basis set. The energy and dipole moment are also determined with 2d functions on oxygen at seven r values. The following methods are compared to the FCI for both the oxygen 1d and 2d basis sets: single-reference singles-plus-doubles configuration interaction (SDCI), SDCI with Davidson's correction, the coupled pair functional approach (CPF) and a modified form of CPF, CASSCF, and CASSCF-MRSDCI, and the external contracted CI(CCI) method. The dipole moments are evaluated both as an expectation value and by finite-field methods. The results support the superiority of evaluating the dipole moment as an energy derivative rather than as an expectation value.

Langhoff, Stephen R.↗

Oscillator strengths and collision strengths for neutral sulfur

Configuration-interaction target wave functions are used in the present calculation of collision strengths, for electron impact excitation of neutral sulfur from the group 3p4 3P state to excited states 3p3 4s 3S0, 3p3(4S0)3d 3D0, and 3p3 4s 3P0, in a close coupling approximation for the energy range up to 1,000,000 K. Configuration-interaction target wave functions are used in the calculation of collision strengths, and oscillator strengths for various triplet transitions are reported together with transitions between 3p4 1D and 3p4 1S and other singlet-excited states.

Ho, Y. K.↗

Simulation of adiabatic quantum computing for molecular ground states

Quantum computation promises to provide substantial speedups in many practical applications with a particularly exciting one being the simulation of quantum many-body systems. Adiabatic state preparation (ASP) is one way that quantum computers could recreate and simulate the ground state of a physical system. In this paper, we explore a novel approach for classically simulating the time dynamics of ASP with high accuracy and with only modest computational resources via an adaptive sampling configuration interaction scheme for truncating the Hilbert space to only the most important determinants. We verify that this truncation introduces negligible error and use this new approach to simulate ASP for sets of small molecular systems and Hubbard models. Furthermore, we examine two approaches to speeding up ASP when performed on quantum hardware: (i) using the complete active space configuration interaction (CASCI) wave function instead of the Hartree–Fock initial state and (ii) a nonlinear interpolation between the initial and target Hamiltonians. We find that starting with a CASCI wave function with a limited active space yields substantial speedups for many of the systems examined, while nonlinear interpolation does not. In additional, we observe interesting trends in the minimum gap location (based on the initial state) as well as how state preparation time can depend on certain molecular properties, such as the number of valence electrons. Importantly, we find that the required state preparation times do not show an immediate exponential wall that would preclude an efficient run of ASP on actual hardware.

Kremenetski, Vladimir↗