SEARCH · Engineering Papers

Results for “Computational Margin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

NASA NTRS1959

Stability and Control Characteristics at Subsonic Speeds of a Flat-Top Arrowhead Wing-Body Combination

A wind-tunnel investigation was made to determine the longitudinal- and lateral-stability derivatives of a flat-top wing-body configuration at Mach numbers from 0.22 to 0.90 and Reynolds numbers of 3.5 and 17 million. The wing had a leading-edge sweepback of 78.9 deg and a cathedral of 45 deg on the outer panels. The tests included the determination of the effectiveness of elevon and rudder controls and also an investigation of ground effects. The model was tested at angles of attack up to 28 deg and angles of sideslip up to 18 deg. The dynamic response of this configuration has been determined from the wind-tunnel data for a simulated airplane having a wing loading of 17.7 pounds per square foot. The longitudinal data show a forward shift in aerodynamic center of 10 percent of the mean aerodynamic chord as the lift coefficient is increased above 0.1. Although flown in the lift range of decreasing stability, the simulated airplane did not encounter pitch-up in maneuvers initiated from steady level flight with zero static margin unless a load factor of 2.2 was exceeded. This maneuver margin was provided by a large value of pitching moment due to pitching velocity. The number of cycles to damp the Dutch roll mode to half amplitude, the time constants of the roll subsidence and spiral divergence modes, and control effectiveness in roll are computed. The lateral stability is shown to be positive but is marginal in meeting the military specifications for today's aircraft. An analog computer study has been made in five degrees of freedom (constant velocity) which illustrates that the handling characteristics are satisfactory. Several programed rolling maneuvers and coordinated turns also illustrate the handling qualities of the airplane.

Buell, Donald A.↗

NASA NTRS2017

Real-Time Prediction of Safety Margins in the National Airspace

Underlying all operations in the National Airspace System (NAS) is the concept of safety. Safety, as defined by acceptable levels of risk, is to be maintained at all times. The real-time safety monitoring (RTSM) framework is under development to provide an automated system to quantify safety in the NAS, estimate the current level of safety, and predict the future evolution of safety and the occurrence of events that pose an increased risk to flights so that these occurrences can be managed strategically rather than mitigated reactively. This paper presents the mathematical framework, the models, and the monitoring and prediction algorithms used to achieve this. RTSM computes safety as expressed through a set of safety margins based on user-defined safety metrics, thresolds, and events. Sources of uncertainty are modeled and propagated through the predictions in order to compute the probabilistic evolution of safety and the probability of events that introduce increased risk to operations. A prototype implementation is discussed and results demonstrating feasibility are presented. The results highlight the kinds of predictions that can be computed and the fidelity that is currently achieved.

national airspace system↗

NASA NTRS2011

Negative Stress Margins - Are They Real?

Advances in modeling and simulation, new finite element software, modeling engines and powerful computers are providing opportunities to interrogate designs in a very different manner and in a more detailed approach than ever before. Margins of safety are also often evaluated using local stresses for various design concepts and design parameters quickly once analysis models are defined and developed. This paper suggests that not all the negative margins of safety evaluated are real. The structural areas where negative margins are frequently encountered are often near stress concentrations, point loads and load discontinuities, near locations of stress singularities, in areas having large gradients but with insufficient mesh density, in areas with modeling issues and modeling errors, and in areas with connections and interfaces, in two-dimensional (2D) and three-dimensional (3D) transitions, bolts and bolt modeling, and boundary conditions. Now, more than ever, structural analysts need to examine and interrogate their analysis results and perform basic sanity checks to determine if these negative margins are real.

Raju, Ivatury S.↗

NASA NTRS2011

Negative stress margins – are they real?

Raju, Ivatury S.↗

NASA NTRS2005

CFD Simulation of Casing Treatment of Axial Flow Compressors

A computational study is carried out to understand the physical mechanism responsible for the improvement in stall margin of an axial flow rotor due to the circumferential casing grooves. It is shown that the computational tool used predicts an increase in operating range of the rotor when casing grooves are present. A budget of the axial momentum equation is carried out at the rotor casing in the tip gap in order to uncover the physical process behind this stall margin improvement. It is shown that for the smooth casing the net axial pressure force . However in the presence of casing grooves the net axial shear stress force acting at the casing is augmented by the axial force due to the radial transport of axial momentum, which occurs across the grooves and power stream interface. This additional force adds to the net axial viscous sheer force and thus leads to an increase in the stall margin of the rotor.

DeWitt, Kenneth↗

NASA NTRS1985

Fiber optic configurations for local area networks

A number of fiber optic configurations for a new class of demand assignment multiple-access local area networks requiring a physical ordering among stations are proposed. In such networks, the data transmission and linear-ordering functions may be distinguished and be provided by separate data and control subnetworks. The configurations proposed for the data subnetwork are based on the linear, star, and tree topologies. To provide the linear-ordering function, the control subnetwork must always have a linear unidirectional bus structure. Due to the reciprocity and excess loss of optical couplers, the number of stations that can be accommodated on a linear fiber optic bus is severely limited. Two techniques are proposed to overcome this limitation. For each of the data and control subnetwork configurations, the maximum number of stations as a function of the power margin, for both reciprocal and nonreciprocal couplers, is computed.

Nassehi, M. M.↗

NASA NTRS1990

LOX/hydrogen coaxial injector atomization test program

Quantitative information about the atomization of injector sprays is needed to improve the accuracy of computational models that predict the performance and stability margin of liquid propellant rocket engines. To obtain this data, a facility for the study of spray atomization is being established at NASA-Lewis to determine the drop size and velocity distributions occurring in vaporizing liquid sprays at supercritical pressures. Hardware configuration and test conditions are selected to make the cold flow simulant testing correspond as closely as possible to conditions in liquid oxygen (LOX)/gaseous H2 rocket engines. Drop size correlations from the literature, developed for liquid/gas coaxial injector geometries, are used to make drop size predictions for LOX/H2 coaxial injectors. The mean drop size predictions for a single element coaxial injector range from 0.1 to 2000 microns, emphasizing the need for additional studies of the atomization process in LOX/H2 engines. Selection of cold flow simulants, measurement techniques, and hardware for LOX/H2 atomization simulations are discussed.

Zaller, M.↗

NASA NTRS1990

LOX/Hydrogen Coaxial Injector Atomization Test Program

Quantitative information about the atomization of injector sprays is needed to improve the accuracy of computational models that predict the performance and stability margin of liquid propellant rocket engines. To obtain this data, a facility for the study of spray atomization is being established at NASA-Lewis to determine the drop size and velocity distributions occurring in vaporizing liquid sprays at supercritical pressures. Hardware configuration and test conditions are selected to make the cold flow simulant testing correspond as closely as possible to conditions in liquid oxygen (LOX)/gaseous H2 rocket engines. Drop size correlations from the literature, developed for liquid/gas coaxial injector geometries, are used to make drop size predictions for LOX/H2 coaxial injectors. The mean drop size predictions for a single element coaxial injector range from 0.1 to 2000 microns, emphasizing the need for additional studies of the atomization process in LOX/H2 engines. Selection of cold flow simulants, measured techniques, and hardware for LOX/H2 atomization simulations are discussed.

Zaller, M.↗

NASA NTRS1992

Determination of robust stability margin for second-order systems

Robust stabilization of uncertain systems has been extensively investigated and the stability test for the whole set of uncertain parameters has been reduced to a finite number of test points, four points for the characteristic polynomial with independent coefficients. As a result the robust stability margin can be determined using a reasonable amount of computation. It is impossible to apply the results of the test to a practical system as the coefficients of the characteristic polynomial for a physical system are usually functions of uncertain parameters. However, many physical systems may be represented by a second-order mass-spring-damper system with a special multilinear form in its characteristic polynomial. This paper investigates second-order mass-spring-damper systems and the reduction of the number of test points. It is shown that such a system with arbritrary compensators always has a multilinear characteristic polynomial. It is also shown that a line in the two-dimensional parameter space forms the boundary after the mapping of a multilinear characteristic polynomial and this interior extreme line forms a conic curve in the complex plane. The boundary of uncertain domain for a multilinear polynomial with two uncertainty parameters can be determined analytically using this curve, and the four sides image of a square of the uncertain parameter. Therefore, the stability margin may be determined by checking the intersections of the boundary with the zero point. A similar procedure can be used for second-order systems with more than two uncertainty parameters when parameter optimization is used in determining the boundary.

Chuang, C.-H.↗

NASA NTRS1972

Fundamental data for contact binaries: RZ Comae, RZ Tauri, and AW UMa

Differential corrections analyses of three W UMa type binaries show that RZ Tau and AW UMa have common envelopes and the relatively small gravity darkening predicted by Lucy, while RZ Comae seems to have a larger gravity effect and is only marginally in contact. Some details of the method for computing contact binary light curves are given. It is suggested that W UMa binaries which have occultation primary eclipses may, in general, have large amplitudes for gravity darkening or a photometric surface brightness effect which simulates large gravity darkening.

Wilson, R. E.↗

NASA NTRS1973

Roll paper pilot

A mathematical model for predicting the pilot rating of an aircraft in a roll task is described. The model includes: (1) the lateral-directional aircraft equations of motion; (2) a stochastic gust model; (3) a pilot model with two free parameters; and (4) a pilot rating expression that is a function of rms roll angle and the pilot lead time constant. The pilot gain and lead time constant are selected to minimize the pilot rating expression. The pilot parameters are then adjusted to provide a 20% stability margin and the adjusted pilot parameters are used to compute a roll paper pilot rating of the aircraft/gust configuration. The roll paper pilot rating was computed for 25 aircraft/gust configurations. A range of actual ratings from 2 to 9 were encountered and the roll paper pilot ratings agree quite well with the actual ratings. In addition there is good correlation between predicted and measured rms roll angle.

Naylor, F. R.↗

NASA NTRS1984

A scanning laser velocimeter for turbulence research

Turbulent and unsteady separated flows occur on most practical flight vehicles, but are not yet sufficiently understood for designs to provide safe margins of performance without recourse to extensive experiment and computation. In date, reliable experimental data for even basic flows is severely limited and does not yet provide a satisfactory data base with which to assess current design and calculation methods. Although the laser velocimeter (LV) has become a proven, nonintrusive instrument for the measurement of local mean velocities and turbulence properties, measurements have been of a mean, statistical nature derived from averages accumulated independently at different positions in the flow. Thus, the measurements do not give an instantaneous dynamic, picture of the flow-field structures. Accordingly, a new technique for rapid LV scans of turbulent flow fields was proposed. The potential of this new instrument for fundamental fluid mechanical measurements of turbulent flows has been demonstrated. The results clearly show that significant unsteady flow features are hidden by conventional measurements and that the scanning laser velocimeter should prove an invauable tool in future studies of the structure of turbulent flows.

Duen, F. K.↗

NASA NTRS1993

Aerodynamic analysis of Pegasus - Computations vs reality

Pegasus, a three-stage, air-launched, winged space booster was developed to provide fast and efficient commercial launch services for small satellites. The aerodynamic design and analysis of Pegasus was conducted without benefit of wind tunnel tests using only computational aerodynamic and fluid dynamic methods. Flight test data from the first two operational flights of Pegasus are now available, and they provide an opportunity to validate the accuracy of the predicted pre-flight aerodynamic characteristics. Comparisons of measured and predicted flight characteristics are presented and discussed. Results show that the computational methods provide reasonable aerodynamic design information with acceptable margins. Post-flight analyses illustrate certain areas in which improvements are desired.

Mendenhall, Michael R.↗

NASA NTRS1987

Comparison of measured temperatures, thermal stresses and creep residues with predictions on a built-up titanium structure

Temperature, thermal stresses, and residual creep stresses were studied by comparing laboratory values measured on a built-up titanium structure with values calculated from finite-element models. Several such models were used to examine the relationship between computational thermal stresses and thermal stresses measured on a built-up structure. Element suitability, element density, and computational temperature discrepancies were studied to determine their impact on measured and calculated thermal stress. The optimum number of elements is established from a balance between element density and suitable safety margins, such that the answer is acceptably safe yet is economical from a computational viewpoint. It is noted that situations exist where relatively small excursions of calculated temperatures from measured values result in far more than proportional increases in thermal stress values. Measured residual stresses due to creep significantly exceeded the values computed by the piecewise linear elastic strain analogy approach. The most important element in the computation is the correct definition of the creep law. Computational methodology advances in predicting residual stresses due to creep require significantly more viscoelastic material characterization.

Jenkins, Jerald M.↗

NASA NTRS2019

Ballistic Entries for Saturn, Uranus, and Neptune with HEEET TPS

One important observation from the Ice Giants Study was that the predicted and margined thicknesses of HEEET were greater than could be woven with the currently established loom capabilities. Since the cost of a loom upgrade could be substantial and time consuming, the present work explored the entry trajectory space to determine what combinations of entry parameters would result in HEEET thicknesses that fit within the existing loom infrastructure. Toward this end, the entry trajectory space, parameterized by ballistic coefficient and entry flight path angle, was systematically explored for 45° sphere-cone geometries of 3 different radii – 0.2 m, 0.3 m, and 0.4 m – which covered the range from Galileo-derived probes considered in the Ice Giants Study, and a follow-on study on the possibility of using a single probe architecture (in terms of size and mass) for various destinations, including Venus, Saturn, Uranus, and Neptune. The entry velocities, latitudes, and azimuths at Uranus and Neptune used in the present work were taken from the Ice Giants Study. For each 3DOF trajectory generated by a NASA Ames in-house code, TRAJ, the material response and thickness were computed using another NASA Ames code, FIAT, along with a margins policy proposed by the HEEET project. In the present work, ballistic coefficients ranging from 200 kg/sq m to 350 kg/sq m were considered along with entry flight path angles ranging from -16° to -36° (primarily to allow deceleration loads to vary between 50 g and 200 g).

Atmospheric Entry↗

NASA NTRS2019

Exploration of Atmospheric Entries at Uranus & Neptune with HEEET as Heatshield TPS

One important observation from the recent Ice Giants Study sponsored by NASA was that the predicted and margined thicknesses of HEEET (new NASA TPS technology) were much greater than could be woven with the currently established loom capabilities. Since the cost of a loom upgrade would be substantial, the present work explores the entry trajectory space to determine what combinations of entry parameters would result in HEEET thicknesses that fit within the existing loom infrastructure. Toward this end, the entry trajectory space, parameterized by ballistic coefficient and entry flight path angle, was systematically explored for 45° sphere-cone geometries of 3 different radii 0.2 m, 0.3 m, and 0.4 m which covered the range from Galileo-derived probes considered in the Ice Giants Study, and a follow-on study on the possibility of using a single probe architecture (in terms of size and mass) for various destinations, including Venus, Saturn, Uranus, and Neptune. The entry velocities, latitudes, and azimuths at Uranus and Neptune used in the present work were taken from the Ice Giants Study. For each 3D OF trajectory generated by a NASA Ames in-house code, TRAJ, the material response and thickness were computed using another NASA Ames code, FIAT, along with a margins policy proposed by the HEEET project. In the present work, ballistic coefficients ranging from 200 kg/sqm to 350 kg/sqm were considered along with entry flight path angles ranging from -16° to -36° (primarily to allow deceleration loads to vary between 50 g and 200 g).

Prabhu, Dinesh K.↗

NASA NTRS1978

Energy consumption program: A computer model simulating energy loads in buildings

The JPL energy consumption computer program developed as a useful tool in the on-going building modification studies in the DSN energy conservation project is described. The program simulates building heating and cooling loads and computes thermal and electric energy consumption and cost. The accuracy of computations are not sacrificed, however, since the results lie within + or - 10 percent margin compared to those read from energy meters. The program is carefully structured to reduce both user's time and running cost by asking minimum information from the user and reducing many internal time-consuming computational loops. Many unique features were added to handle two-level electronics control rooms not found in any other program.

Stoller, F. W.↗

NASA NTRS1975

An experimental investigation of compressor stall using an on-line distortion indicator and signal conditioner

The relation of the steady-state and dynamic distortions and the stall margin of a J85-13 turbojet engine was investigated. A distortion indicator capable of computing two distortion indices was used. A special purpose signal conditioner was also used as an interface between transducer signals and distortion indicator. A good correlation of steady-state distortion and stall margin was established. The prediction of stall by using the indices as instantaneous distortion indicators was not successful. A sensitivity factor that related the loss of stall margin to the turbulence level was found.

Costakis, W. G.↗