Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Child”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Green's formula and variational principles for cosmic-ray transport with application to rotating and shearing flows

Green's theorem and Green's formula for the diffusive cosmic-ray transport equation in relativistic flows are derived. Green's formula gives the solution of the transport equation in terms of the Green's function of the adjoint transport equation, and in terms of distributed sources throughout the region R of interest, plus terms involving the particle intensity and streaming on the boundary. The adjoint transport equation describes the time-reversed particle transport. An Euler-Lagrange variational principle is then obtained for both the mean scattering frame distribution function f, and its adjoint f(dagger). Variations of the variational functional with respect to f(dagger) yield the transport equation, whereas variations of f yield the adjoint transport equation. The variational principle, when combined with Noether's theorem, yields the conservation law associated with Green's theorem. An investigation of the transport equation for steady, azimuthal, rotating flows suggests the introduction of a new independent variable H to replace the comoving frame momentum variable p'. For the case of rigid rotating flows, H is conserved and is shown to be analogous to the Hamiltonian for a bead on a rigidly rotating wire. The variable H corresponds to a balance between the centrifugal force and the particle inertia in the rotating frame. The physical interpretation of H includes a discussion of nonrelativistic and special relativistic rotating flows as well as the cases of aziuthal, differentially rotating flows about Schwarzs-child and Kerr black holes. Green's formula is then applied to the problem of the acceleration of ultra-high-energy cosmic rays by galactic rotation. The model for galactic rotation assumes an angular velocity law Omega = Omega(sub 0)(omega(sub 0)/omega), where omega denotes radial distance from the axis of rotation. Green's functions for the galactic rotation problem are used to investigate the spectrum of accelerated particles arising from monoenergetic and truncated power-law sources. We conclude that it is possible to accelerate particles beyond the knee by galactic rotation, but not in sufficient number to adequately explain the observed spectrum.

Webb, G. M.↗
NASA NTRS1996

Impeller leakage flow modeling for mechanical vibration control

HPOTP and HPFTP vibration test results have exhibited transient and steady characteristics which may be due to impeller leakage path (ILP) related forces. For example, an axial shift in the rotor could suddenly change the ILP clearances and lengths yielding dynamic coefficient and subsequent vibration changes. ILP models are more complicated than conventional-single component-annular seal models due to their radial flow component (coriolis and centrifugal acceleration), complex geometry (axial/radial clearance coupling), internal boundary (transition) flow conditions between mechanical components along the ILP and longer length, requiring moment as well as force coefficients. Flow coupling between mechanical components results from mass and energy conservation applied at their interfaces. Typical components along the ILP include an inlet seal, curved shroud, and an exit seal, which may be a stepped labyrinth type. Von Pragenau (MSFC) has modeled labyrinth seals as a series of plain annular seals for leakage and dynamic coefficient prediction. These multi-tooth components increase the total number of 'flow coupled' components in the ILP. Childs developed an analysis for an ILP consisting of a single, constant clearance shroud with an exit seal represented by a lumped flow-loss coefficient. This same geometry was later extended to include compressible flow. The objective of the current work is to: supply ILP leakage-force impedance-dynamic coefficient modeling software to MSFC engineers, base on incompressible/compressible bulk flow theory; design the software to model a generic geometry ILP described by a series of components lying along an arbitrarily directed path; validate the software by comparison to available test data, CFD and bulk models; and develop a hybrid CFD-bulk flow model of an ILP to improve modeling accuracy within practical run time constraints.

Palazzolo, Alan B.↗
NASA NTRS1996

Building Satellites is Easier

'Building Satellites' is a story about Jim Marsh's recovery from a severe head injury told by his wife Phyllis from the moment she learned of its happening, through the ups and downs of a lengthy rehabilitation, until his return to work and daily living. It continues on, however, and narrates his battle with the more insidious Grave's disease. Told in the first person, 'Building Satellites' vividly portrays Phyllis's thoughts and feelings throughout this experience with scrupulous honestly. This is a story worth reading for many reasons. First of all, Jim was an accomplished scientist, respected by his colleagues both in this country and abroad. Secondly, it narrates the many stages of his recovery from head injury with detailed readable accuracy; it informs us as well as inspires. Finally, 'Building Satellites" also tells us the story of Phyllis Marsh's remarkable creative response to this crisis. It narrates her personal experiences as she progresses through the strange and somewhat bizarre world of medicine and rehabilitation, guided by a few basic beliefs, which she learned as a child in Iowa, that provided her with the strength to endure. 'Building Satellites' seems to reaffirm our unconscious, but settled conviction, that when confornted overnight with adversity, we are somehow given the means for coping, supported by our basic beliefs, strengthened by family and friends, and eventually learning to accept any outcome.

Marsh, Phyllis Nimmo↗
NASA NTRS1994

Language in Comparative Perspective

The twentieth century will be noted for a wide variety of scientific and technological advancements, including powered flight, antibiotics, space travel, and the breaking of the genetic code. It also should be noted as the century in which major psychological, as well as biological, continuities between animal and human have been defined. Charles Darwin (1859) was quite right when he anticipated continuity in mental processes, some of which provide for language. Though none will argue that any animal has the full capacity of humans for language, none should deny that at least some animals have quite impressive competencies for language skills, including speech comprehension. The finding that the language skills in the bonobo and the chimpanzee are likely more fully and efficiently developed as a result of early rearing than by formal training at a later age declares a continuity even stronger than that defined by the language acquisition potential of the ape. To clarify, because early rearing facilitates the emergence of language in ape as well as in child, a naturalness to the familiar course of language acquisition, whereby comprehension precedes production, is also corroborated. In turn, the continuity and the shared naturalness of language acquisition serve jointly to define an advanced and critical point of linkage between the genera Pan and Homo - and, as concluded by Domjan (1993), one worthy of contributing to the series of reconceptions of ourselves as anticipated by Ploog and Melnechuk (1971).

Rumbaugh, Duane M.↗
NASA NTRS1998

Measurement of Xenon Viscosity as a Function of Low Temperature and Pressure

The measurement of xenon gas viscosity at low temperatures (175-298 K) and low pressures (350 torr-760 torr) has been performed in support of Hall Thruster testing at NASA Lewis Research Center. The measurements were taken using the capillary flow technique. Viscosity measurements were repeatable to within 3%. The results in this paper are in agreement with data from Hanley and Childs and suggest that the data from Clarke and Smith is approximately 2% low. There are no noticeable pressure effects on xenon absolute viscosity for the pressure range from 350 torr to 760 torr.

Grisnik, Stanley P.↗
NASA NTRS1999

MOD Tool (Microwave Optics Design Tool)

The Jet Propulsion Laboratory (JPL) is currently designing and building a number of instruments that operate in the microwave and millimeter-wave bands. These include MIRO (Microwave Instrument for the Rosetta Orbiter), MLS (Microwave Limb Sounder), and IMAS (Integrated Multispectral Atmospheric Sounder). These instruments must be designed and built to meet key design criteria (e.g., beamwidth, gain, pointing) obtained from the scientific goals for the instrument. These criteria are frequently functions of the operating environment (both thermal and mechanical). To design and build instruments which meet these criteria, it is essential to be able to model the instrument in its environments. Currently, a number of modeling tools exist. Commonly used tools at JPL include: FEMAP (meshing), NASTRAN (structural modeling), TRASYS and SINDA (thermal modeling), MACOS/IMOS (optical modeling), and POPO (physical optics modeling). Each of these tools is used by an analyst, who models the instrument in one discipline. The analyst then provides the results of this modeling to another analyst, who continues the overall modeling in another discipline. There is a large reengineering task in place at JPL to automate and speed-up the structural and thermal modeling disciplines, which does not include MOD Tool. The focus of MOD Tool (and of this paper) is in the fields unique to microwave and millimeter-wave instrument design. These include initial design and analysis of the instrument without thermal or structural loads, the automation of the transfer of this design to a high-end CAD tool, and the analysis of the structurally deformed instrument (due to structural and/or thermal loads). MOD Tool is a distributed tool, with a database of design information residing on a server, physical optics analysis being performed on a variety of supercomputer platforms, and a graphical user interface (GUI) residing on the user's desktop computer. The MOD Tool client is being developed using Tcl/Tk, which allows the user to work on a choice of platforms (PC, Mac, or Unix) after downloading the Tcl/Tk binary, which is readily available on the web. The MOD Tool server is written using Expect, and it resides on a Sun workstation. Client/server communications are performed over a socket, where upon a connection from a client to the server, the server spawns a child which is be dedicated to communicating with that client. The server communicates with other machines, such as supercomputers using Expect with the username and password being provided by the user on the client.

Katz, Daniel S.↗
NASA NTRS1998

Locating Biodiversity Data Through The Global Change Master Directory

The Global Change Master Directory (GCMD) presently holds descriptions for almost 7000 data sets held worldwide. The directory's primary purpose is for data discovery. The information provided through the GCMD's Directory Interchange Format (DIF) is the set of information that a researcher would need to determine if a particular data set could be of value. By offering data set descriptions worldwide in many scientific disciplines - including meteorology, oceanography, ecology, geology, hydrology, geophysics, remote sensing, paleoclimate, solar-terrestrial physics, and human dimensions of climate change - the GCMD simplifies the discovery of data sources. Direct linkages to many of the data sets are also provided. In addition, several data set registration tools are offered for populating the directory. To search the directory, one may choose the Guided Search or Free-Text Search. Two experimental interfaces were also made available with the latest software release - one based on a keyword search and another based on a graphical interface. The graphical interface was designed in collaboration with the Human Computer Interaction Laboratory at the University of Maryland. The latest version of the software, Version 6, was released in April, 1998. It features the implementation of a scheme to handle hierarchical data set collections (parent-child relationships); a hierarchical geospatial location search scheme; a Java-based geographic map for conducting geospatial searches; a Related-URL field for project-related data set collections, metadata extensions (such as more detailed inventory information), etc.; a new implementation of the Isite software; a new dataset language field; hyperlinked email addresses, and more. The key to the continued evolution of the GCMD is in the flexibility of the GCMD database, allowing modifications and additions to made relatively easily to maintain currency, thus providing the ability to capitalize on current technology while importing all existing records. Changes are discussed and approved through an online "interoperability" forum. The next major release of the GCMD is scheduled for early 1999 and will include the incorporation of a new matrix-based interface, a rapid valids-based query system; improvement in the operations facility - important for future distributed options; new streamlined code for greater performance and maintainability; improvements in the handling of seven current fields proposed through the interoperability forum (at no expense to the data providers); and the release of DOCmorph, a more robust version of DIFmorph to translate many 'standards' multi-directionally. Issues and actions will also be addressed.

Olsen, Lola M.↗
NASA NTRS2001

Preliminary Study of Electron Emission for Use in the PIC Portion of MAFIA

This memorandum summarizes a study undertaken to apply the program MAFIA to the modeling of an electron gun in a traveling wave tube (TWT). The basic problem is to emit particles from the cathode in the proper manner. The electrons are emitted with the classical Maxwell-Boltzmann (M-B) energy distribution; and for a small patch of emitting surface; the distribution with angle obeys Lambert's law. This states that the current density drops off as the cosine of the angle from the normal. The motivation for the work is to extend the analysis beyond that which has been done using older codes. Some existing programs use the Child-Langmuir, or 3/2 power law, for the description of the gun. This means the current varies as the 3/2 power of the anode voltage. The proportionality constant is termed the perveance of the gun. This is limited, however, since the 3/2 variation is only an approximation. Also, if the cathode is near saturation, the 3/2 law definitely will not hold. In most of the older codes, the electron beam is decomposed into current tubes, which imply laminar flow in the beam; even though experiments show the flow to be turbulent. Also, the proper inclusion of noise in the beam is not possible. These older methods of calculation do, however, give reasonable values for parameters of the electron beam and the overall gun, and these values will be used as the starting point for a more precise particle-in-cell (PIC) calculation. To minimize the time needed for a given computer run, all beams will use the same number of particles in a simulation. This is accomplished by varying the mass and charge of the emitted particles (macroparticles) in a certain manner, to be consistent with the desired beam current.

Freeman, Jon C.↗
NASA NTRS2001

Lessons Learned and Technical Standards: A Logical Marriage

A comprehensive database of lessons learned that corresponds with relevant technical standards would be a boon to technical personnel and standards developers. The authors discuss the emergence of one such database within NASA, and show how and why the incorporation of lessons learned into technical standards databases can be an indispensable tool for government and industry. Passed down from parent to child, teacher to pupil, and from senior to junior employees, lessons learned have been the basis for our accomplishments throughout the ages. Government and industry, too, have long recognized the need to systematically document And utilize the knowledge gained from past experiences in order to avoid the repetition of failures and mishaps. The use of lessons learned is a principle component of any organizational culture committed to continuous improvement. They have formed the foundation for discoveries, inventions, improvements, textbooks, and technical standards. Technical standards are a very logical way to communicate these lessons. Using the time-honored tradition of passing on lessons learned while utilizing the newest in information technology, the National Aeronautics and Space Administration (NASA) has launched an intensive effort to link lessons learned with specific technical standards through various Internet databases. This article will discuss the importance of lessons learned to engineers, the difficulty in finding relevant lessons learned while engaged in an engineering project, and the new NASA project that can help alleviate this difficulty. The article will conclude with recommendations for more expanded cross-sectoral uses of lessons learned with reference to technical standards.

Gill, Paul↗
NASA NTRS1997

Toy Gliders

Toy designers at Hasbro, Inc. wanted to create a foam glider that a child could fly with little knowledge of aeronautics. But early in its development, the Areo Nerf gliders had one critical problem: they didn't fly so well. Through NASA's Northeast Regional Technology Transfer Center, Hasbro was linked with aeronautical experts at Langley Research Center. The engineers provided information about how wing design and shape are integral to a glider's performance. The Hasbro designers received from NASA not only technical guidance but a hands-on tutorial on the physics of designing and flying gliders. Several versions of the Nerf glider were realized from the collaboration. For instance, the Super Soaring Glider can make long-range, high performance flights while the Ultra-Stunt Glider is ideal for performing aerial acrobatics.

Source record↗
NASA NTRS2002

Pure Water From a Pure Genius

Ammonium perchlorate is widely used throughout the aerospace, munitions, and pyrotechnics industries as a primary ingredient in solid rocket and missile propellants, fireworks, and explosive charges. This highly soluble salt has tainted soils and water sources all over the world, and is believed to be an endocrine disrupter, adversely affecting the growth patterns of a fetus or a young child. UMPQUA Research Company (URC), once a small drinking water testing laboratory and a research and development contractor for NASA's manned spaceflight applications, has evolved to become a leader in water purification and analysis. With a total of 11 patents issued for new technologies created by URC under NASA SBIR contracts and a 25-year commitment to water recycling, the company clearly possessed the qualifications necessary to tackle the presence of perchlorate in water. An SBIR contract with NASA's Marshall Space Flight Center that concentrated on the stringent water quality requirements of long-term, manned spaceflight was the source for URC's process and catalyst to facilitate the destruction of perchlorate and nitrate in water. URC licensed the rights of its unique reduction reaction process to Calgon Carbon Corporation for use with the company's perchlorate/nitrate remediation process, otherwise known as ISEP(R).

Source record↗
NASA NTRS1976

Gait Analysis Laboratory

Complete motion analysis laboratory has evolved out of analyzing walking patterns of crippled children at Stanford Children's Hospital. Data is collected by placing tiny electrical sensors over muscle groups of child's legs and inserting step-sensing switches in soles of shoes. Miniature radio transmitters send signals to receiver for continuous recording of abnormal walking pattern. Engineers are working to apply space electronics miniaturization techniques to reduce size and weight of telemetry system further as well as striving to increase signal bandwidth so analysis can be performed faster and more accurately using a mini-computer.

Source record↗
NASA NTRS2003

Using CASE to Adopt Organizational Learning at NASA

The research direction was articulated in a statement of work created in collaboration between two program colleagues, an outside researcher and an internal user. The researcher was to deliver an implemented CASE tool (CasewiseTM) that was to be used to serve non-traditional (i.e., not software development related) organizational purposes. The explicitly stated functions of the tool were the support of 1) ISO-9000 compliance in the documentation of processes and 2) the management of process improvement. The collaborative team consisted of the researcher (GT), a full-time accompanying student (CRO), and the user (JD). The team originally focused on populating the CASE repository for the purpose of solving the two primary objectives. Consistent with the action research approach, several additional user requirements emerged as the project evolved, needs became apparent in discussions about how the tool would be used to solve organizational problems. These deliverables were contained within the CASE repository: 1) the creation of a paradigm diagram 2) the creation of a context diagram 3) the creation of child diagrams 4) the generation of 73 issues relating to organizational change 5) a compendium of stakeholder interview transcripts All record keeping was done manually and then keyed into the CASE interface. An issue is the difference between an organization s current situation (action) and its collective ideals.

Templeton, Gary F.↗
NASA NTRS2004

Self-Activating System and Method for Alerting When an Object or a Person is Left Unattended

A system and method uses a wireless tether comprising a transmitter and a receiver to alert a caregiver that an object or person has been left unattended. A detector Senses the presence of the object, usually a child, located in a position such as a safety seat. The detector couples to the transmitter, which is located near the object. The transmitter transmits at least one wireless signal when the object is in the position. The receiver, which is remotely located from the transmitter, senses the at least one signal as long as the receiver is within a prescribed range of transmission. By performing a timing function, the receiver monitors the proximity of the caregiver, who maintains possession of the receiver, to the transmitter. The system communicates an alarm to the caregiver when the caregiver ventures outside the range of transmission without having removed the object/child from the position.

William Christopher Edwards↗
NASA NTRS2004

Turbomachine Sealing and Secondary Flows: Review of Rotordynamics Issues in Inherently Unsteady Flow Systems With Small Clearances - Part 2

Today's computational methods enable the determination of forces in complex systems, but without field validation data, or feedback, there is a high risk of failure when the design envelope is challenged. The data of Childs and Bently and field data reported in NASA Conference Proceedings serve as sources of design information for the development of these computational codes. Over time all turbomachines degrade and instabilities often develop, requiring responsible, accurate, turbomachine diagnostics with proper decisions to prevent failures. Tam et al. (numerical) and Bently and Muszynska (analytical) models corroborate and implicate that destabilizing factors are related through increases in the fluid-force average circumferential velocity. The stability threshold can be controlled by external swirl and swirl brakes and increases in radial fluid film stiffness (e.g., hydrostatic and ambient pressures) to enhance rotor stability. Also cited are drum rotor self-excited oscillations, where the classic fix is to add a split or severed damper ring or cylindrical damper drum, and the Benkert-Wachter work that engendered swirl brake concepts. For a smooth-operating, reliable, long-lived machine, designers must pay very close attention to sealing dynamics and diagnostic methods. Correcting the seals enabled the space shuttle main engine high-pressure fuel turbopump (SSME HPFTP) to operate successfully.

Hendricks, R. C.↗
NASA NTRS2004

Health Monitoring System for Car Seat

A health monitoring system for use with a child car seat has sensors mounted in the seat to monitor one or more health conditions of the seat's occupant. A processor monitors the sensor's signals and generates status signals related to the monitored conditions. A transmitter wireless transmits the status signals to a remotely located receiver. A signaling device coupled to the receiver produces at least one sensory (e.g., visual, audible, tactile) output based on the status signals.

Susan Vinz Elrod↗
NASA NTRS2004

The New Approach to Self-Achievement (N.A.S.A.) Project 2004

The New Approach to Self-Achievement Program is designed to target rising seventh, eighth, and ninth grade students who require assistance in refining their mathematical skills, science awareness and knowledge, and test taking strategies. During the six week duration of the program, students are challenged in these areas through the application of robotic and aeronautic projects which encourage the students to practically apply their mathematical and science awareness accordingly. The first three weeks of my tenure were designated to assisting Mrs. Tammy Allen in the preparation of the 2004 NASA Project. As her assistant, I was held accountable for organizing, filing, preparing, analyzing, and completing the applications for the NASA Project. Additionally, I constructed the apposite databases which contained imperative information which aided in the selection of our participants. During the latter portion of those three weeks, Mrs. Allen, various staff members, and I, interviewed the numerous first-time applicants of the NASA Project. Furthermore, I was assigned to contact the accepted applicants of the program and provide all necessary information for the initiation of the child into the NASA Project. During the six week duration of the program, I will be working as a Project Leader at the Lorain Middle School site located in Lorain, Oh, with Mr. Fondriest Fountain. Mr. Fountain and I Will work with the eighth and ninth grade students in constructing robots, in which the students are told are made for NASA research which is being conducted on the surface of planet Mars. The robots, which are built from LEGOS and programmed through RoboLab computer software, are prepared to complete assigned Missions such as running obstacle courses; plowing and retrieving LEGOS; and scanning surfaces for intense regions of light.

Thomas, Candace J.↗
NASA NTRS2005

STS-114: Crew Interviews 1. Andy Thomas 2. Steve Robinson

STS-114 Mission Specialists, Andy Thomas and Steve Robinson, are seen in this pre-flight interview. Andy Thomas begins by talking about his interest in spaceflight as a young boy growing up in Australia. He expresses that the chances of an Australian boy studying to eventually become an astronaut was very remote. His Mechanical Engineering Degree in Australia and a Doctorate enabled him to acquire unique skills to come to the United States to work for Lockheed Martin. On the topic of return to flight, he reflects on experiences that he had working with the Michael Anderson and Kalpana Chawla of the ill-fated Space Shuttle Columbia. He also talks about the safety of the Space Shuttle Discovery and repairs to its Thermal Protection system. He explains in detail the Logistics Flight (LF) 1, spacewalks, Multipurpose Logistics Module (MPLM) and the External Stowage Platform (ESP)-2. Steve Robinson expresses that he had many interests as a child and becoming an astronaut was one of them. He was fascinated with things that fly and wanted to find out how they flew. He also designed hang gliders as a teenager. He expresses how his family feels about the risky business of spaceflight. He talks about how the space shuttle discovery crew will remember the Columbia crew by including seven stars on their patch so that they can bring them into orbit and then back home. Robinson also talks about his primary job, and the spacewalks that he and Soichi Noguchi will be performing.

Source record↗