Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Chemical modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Plasma-assisted atomic layer etching of single-crystal diamond

Applications of near-surface nitrogen-vacancy (NV) centers in diamond are often limited by surface defects created during processing. Understanding and controlling plasma-induced surface damage is important for preserving the optical and spin properties of diamond NV centers. We report molecular dynamics simulations of a novel form of plasma-aided atomic layer etching of diamond. In this proposed scheme, the initial surface modification step consists of Ar + ion bombardment. This creates an amorphous layer at the surface, the thickness of which is controlled by the ion energy. Amorphization is known to help smooth the surface, at least locally, and would also serve to sputter clean an initially contaminated surface. A second step impacts the amorphous carbon layer with O + between about 1 and 5 eV. Simulations show that this energy range will remove the amorphous carbon but will not etch the underlying diamond. Though this energy range is not trivial to achieve in a conventional low-temperature plasma, potential methods for creating these low-energy O + ions are discussed. In addition to a-C etching, the O + impacts are predicted to remove any isolated (100) diamond terraces by selectively attacking the edges of the terraces. The proposed atomic layer etching (ALE) approach reverses the conventional ALE sequence in which the surface modification step is usually chemical modification (oxidation in this case), followed by a removal step using Ar + impacts. This plasma ALE procedure is predicted to create a diamond surface that is atomically flat and defect free.

Draney, J. S. [Princeton University, NJ (United St↗

Specific Features of the Optical Characteristics of Porous Silicon and Their Modification by Chemical Treatment of the Surface

Comparative studies of the specific features of the composition and photoluminescence properties of porous silicon with different morphologies are carried out by infrared and photoluminescence spectroscopy. On the basis of the experimental data and commonly accepted theoretical models, the main factors that influence the photoluminescence intensity and its deterioration upon the exposure of porous silicon to directed radiation in the visible region are established. By the example of porous silicon with 50–100 nm pores, the possibility of improving the above characteristics by chemical treatment in polyacrylic acid is shown.

36 MATERIALS SCIENCE↗

Neoplastic cell transformation by energetic heavy ions and its modification with chemical agents

One of the major deleterious late effects of ionizing radiation is related to the induction of neoplasms. In the present report recent experimental results on neoplastic cell transformation by heavy ions are presented, and possible means to circumvent the carcinogenic effect of space radiation are discussed. Biological effects observed in experiments involving the use of energetic heavy ions accelerated at the Bevalac suggest that many of the biological effects observed in earlier space flight experiments may be due to space radiation, particularly cosmic rays. It is found that the effect of radiation on cell transformation is dose-rate dependent. The frequency of neoplastic transformation for a given dose decreases with a decrease of dose rate of Co-60 gamma rays. It is found that various chemical agents give radiation protection, including DMSO.

Yang, T. C.↗

FTO regulates myoblast proliferation by controlling CCND1 expression in an m6A-YTHDF2-dependent manner

Highlights: • Silencing FTO delays cell cycle and inhibits cell proliferation. • FTO regulates cell proliferation depending on its m{sup 6}A demethylation activity. • Silencing FTO suppresses CCND1 expression via YTHDF2-mediated mRNA degradation. • Knockdown YTHDF2 eliminates the cell cycle arrest in FTO-deficient cells. N6-Methyladenosine (m{sup 6}A) modification is the most abundant chemical modification in mRNA, and it participates in various biological processes, such as cell differentiation and proliferation. However, little is known about the function of m{sup 6}A demethylase fat mass and obesity-associated (FTO) in myoblast proliferation. Here, we demonstrated that knockdown of FTO can significantly inhibit myoblast proliferation and promote apoptosis. RNA sequencing analysis revealed that a lot of downregulated genes in FTO knockdown cells are associated with cell cycle and apoptosis. Furthermore, silencing FTO drastically decreased cyclin D1 (CCND1) expression through YTHDF2-mediated mRNA degradation, thereby delaying the progression of G1 phase, and leading to impaired myoblast proliferation. These findings unraveled that FTO regulates myoblast proliferation by controlling CCND1 expression in an m{sup 6}A-YTHDF2-dependent manner, which highlights the critical roles of m{sup 6}A modification in myoblast proliferation.

60 APPLIED LIFE SCIENCES↗

Quantum dynamics of nuclear spins and spin relaxation in organic semiconductors

3D printing of materials with active functional groups can provide custom-designed structures that promote chemical conversions. Herein, catalytically active architectures were produced by photopolymerizing bifunctional molecules using a commercial stereolithographic 3D printer. Functionalities in the monomers included a polymerizable vinyl group to assemble the 3D structures and a secondary group to provide them with active sites. The 3D-printed architectures containing accessible carboxylic acid, amine, and copper carboxylate functionalities were catalytically active for the Mannich, aldol, and Huisgen cycloaddition reactions, respectively. The functional groups in the 3D-printed structures were also amenable to post-printing chemical modification. As proof of principle, chemically active cuvette adaptors were 3D printed and used to measure in situ the kinetics of a heterogeneously catalyzed Mannich reaction in a conventional solution spectrophotometer. In addition, 3D-printed millifluidic devices with catalytically active copper carboxylate complexes were used to promote azide-alkyne cycloaddition under flow conditions. The importance of controlling the 3D architecture of the millifluidic devices was evidenced by enhancing reaction conversion upon increasing the complexity of the 3D prints.

3D printing↗

Direct 3D Printing of Catalytically Active Structures

3D printing of materials with active functional groups can provide custom-designed structures that promote chemical conversions. Catalytically active architectures were produced by photopolymerizing bifunctional molecules using a commercial stereolithographic 3D printer. Functionalities in the monomers included a polymerizable vinyl group to assemble the 3D structures and a secondary group to provide them with active sites. The 3D-printed architectures containing accessible carboxylic acid, amine, and copper carboxylate functionalities were catalytically active for the Mannich, aldol, and Huisgen cycloaddition reactions, respectively. The functional groups in the 3D-printed structures were also amenable to post-printing chemical modification. And as proof of principle, chemically active cuvette adaptors were 3D printed and used to measure in situ the kinetics of a heterogeneously catalyzed Mannich reaction in a conventional solution spectrophotometer. In addition, 3D-printed millifluidic devices with catalytically active copper carboxylate complexes were used to promote azide-alkyne cycloaddition under flow conditions. The importance of controlling the 3D architecture of the millifluidic devices was evidenced by enhancing reaction conversion upon increasing the complexity of the 3D prints.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scalable processing of ZnS nanoparticles for high photoluminescence efficiency quantum dots

Nano Elements Source, LLC, a biotech startup has licensed the NanoFermentation technology from Oak Ridge National Laboratory to further commercialize low cost, cadmium free photoluminescent nanoparticles produced using affordable, environmentally-friendly. This project aimed to develop post chemical processing of biosynthesized ZnS quantum dots (QD) to improve their efficiency of luminescence to make them suitable for solid state lighting applications. Several post processing approached were proposed and tested using to biosynthesized of ZnS QD. Optical properties of ZnS nanoparticles including soft chemical etching, and photonic etching have been tested and quantified against standard materials. We applied the developed chemical modification approach to control quality of chemically synthetized ZnS QD’s, and to calculate the maximum achievable efficiency of photoluminescence. We estimated the cost of the proposed post-processing treatment of nanoFermented nanoparticles and proposed several approaches to further the development of low cost nanoparticles for electro-optical and other applications relevant to DOE mission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent-Free Synthesis of Janus Colloidal Particles

Taking advantage of the quick and efficient access of vapor to surfaces, a simple, solvent-free method is demonstrated to synthesize Janus colloidal particles in large quantity and with high efficiency. First, at the liquid–liquid interface of emulsified molten wax and water, untreated silica particles adsorb and are frozen in place when the wax solidifies. The exposed surfaces of the immobilized particles are modified chemically by exposure to silane vapor and, in principle, subsequent dissolution of the wax opens up the inner particle surface for further chemical modification. Applying this scheme, this paper describes the production of amphiphilic Janus particles (hydrophobic on one side, hydrophilic on the other) and dipolar Janus particles (positively charged on one side, negatively charged on the other). Janus geometry is confirmed by fluorescence microscopy and flow cytometry. As a result, amphiphilic Janus particles are found to adsorb strongly to the water–oil interface, whereas dipolar particles assemble into chains in the aqueous phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials Based on Technical Bulk Lignin

Lignin is the second most abundant biopolymer and the main source of aromatic structures on earth. Lignin has long been produced as a byproduct of the pulping process and utilized in low value-added applications like heat. However, lignin has received increased attention in recent years to improve its value through various chemical processes. This Review compiles recent progress in synthesis, properties, and applications of lignin-based materials. The lignin for material applications can often be classified into three categories: technical bulk lignin (TBL), lignin-derived oligomers (LDOs), and lignin-derived phenols (LDPs). Furthermore, this Review focuses on the chemical modifications of TBLs and their applications in novel smart materials like self-healing, stimulus responsive, and shape memory polymers. The conversion of TBL to polymers can be briefly divided into two steps: (1) introduction of polymerizable functional groups into the lignin backbone and (2) polymerization that achieves desired materials. Both lignin functionalization and polymerization approaches are discussed in detail. As such, this work attempts to provide a comprehensive overview that highlights the importance of these approaches for the utilization of the abundant but largely ignored biopolymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications

With the arising of global climate change and resource shortage, in recent years, increased attention has been paid to environmentally friendly materials. Trees are sustainable and renewable materials, which give us shelter and oxygen and remove carbon dioxide from the atmosphere. Trees are a primary resource that human society depends upon every day, for example, homes, heating, furniture, and aircraft. Wood from trees gives us paper, cardboard, and medical supplies, thus impacting our homes, school, work, and play. All of the above-mentioned applications have been well developed over the past thousands of years. However, trees and wood have much more to offer us as advanced materials, impacting emerging high-tech fields, such as bioengineering, flexible electronics, and clean energy. Wood naturally has a hierarchical structure, composed of well-oriented microfibers and tracheids for water, ion, and oxygen transportation during metabolism. At higher magnification, the walls of fiber cells have an interesting morphology--a distinctly mesoporous structure. Moreover, the walls of fiber cells are composed of thousands of fibers (or macrofibrils) oriented in a similar angle. Nanofibrils and nanocrystals can be further liberated from macrofibrils by mechanical, chemical, and enzymatic methods. The obtained nanocellulose has unique optical, mechanical, and barrier properties and is an excellent candidate for chemical modification and reconfiguration. Wood is naturally a composite material, comprised of cellulose, hemicellulose, and lignin. Wood is sustainable, earth abundant, strong, biodegradable, biocompatible, and chemically accessible for modification; more importantly, multiscale natural fibers from wood have unique optical properties applicable to different kinds of optoelectronics and photonic devices. Today, the materials derived from wood are ready to be explored for applications in new technology areas, such as electronics, biomedical devices, and energy. The goal of this study is to review the fundamental structures and chemistries of wood and wood-derived materials, which are essential for a wide range of existing and new enabling technologies. The scope of the review covers multiscale materials and assemblies of cellulose, hemicellulose, and lignin as well as other biomaterials derived from wood, in regard to their major emerging applications. Structure-properties-application relationships will be investigated in detail. Understanding the fundamental properties of these structures is crucial for designing and manufacturing products for emerging applications. Today, a more holistic understanding of the interplay between the structure, chemistry, and performance of wood and wood-derived materials is advancing historical applications of these materials. This new level of understanding also enables a myriad of new and exciting applications, which motivate this review. There are excellent reviews already on the classical topic of woody materials, and some recent reviews also cover new understanding of these materials as well as potential applications. This review will focus on the uniqueness of woody materials for three critical applications: green electronics, biological devices, and energy storage and bioenergy.

09 BIOMASS FUELS↗

A covalent modification for graphene by adamantane groups through two-step chlorination-Grignard reactions

Chemical modification of graphene is a promising approach to manipulate its properties for its end applications. Herein we designed a two-step route through chlorination-Grignard reactions to covalently decorate the surface of graphene with adamantane groups. The chemically modified graphene was characterized by Raman spectroscopy, atomic force microscopy, and X-ray photoelectron spectroscopy. Chlorination of graphene occurred rapidly, and the substitution of chlorine atoms on chlorinated graphene by adamantane Grignard reagent afforded adamantane graphene in almost quantitative yield. Adamantane groups were found to be covalently bonded to the graphene carbons. The present two-step procedure may provide an effective and facile route for graphene modification with varieties of organic functional groups. - Graphical abstract: Adamantane groups covalently functionalized graphene is obtained by direct substitution of chlorinated graphene with bromoadamantane Grignard reagent.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heating induced structural and chemical behavior of KD{sub 2}PO{sub 4} in the 25 °C–215 °C temperature range

We have used powder x-ray diffraction (XRD) to investigate the structural and chemical modifications undergone by KD{sub 2}PO{sub 4} (DKDP) upon heating from room temperature to 215 °C. Full-profile (Le Bail) analysis of our temperature-resolved data shows no evidence of polymorphic structural transitions or deuterium–hydrogen isotope exchange occurring below T{sub s} = 185 °C. The lattice parameters of DKDP vary smoothly upon heating to T{sub s} and are 0.2% to 0.6% greater than those of its isostructural hydrogenated counterpart KH{sub 2}PO{sub 4} (KDP). In addition, XRD isotherms collected at T{sub s} demonstrate the structural and chemical stability of the title compound at this temperature over a 10.5 h time period. Upon further heating, however, the tetragonal DKDP phase becomes unstable, as evidenced by its transition to a monoclinic DKDP modification and eventual chemical decomposition via dehydration. - Highlights: • Structural and chemical behavior of KD{sub 2}PO{sub 4} is investigated upon heating to 215 °C • No polymorphic transitions or deuterium-hydrogen isotope exchange below T{sub s} = 185 °C • KD{sub 2}PO{sub 4} is structurally and chemically stable at T{sub s} over a 10.5 h time period • KD{sub 2}PO{sub 4} chemically decomposes via dehydration upon heating above T{sub d} = 195 °C.

36 MATERIALS SCIENCE↗

Operando tribochemical formation of onion-like-carbon leads to macroscale superlubricity

High contact pressure and shear during relative movement of the sliding interfaces are known to cause structural or chemical modification or complete phase transformation due to the stress induced chemical reaction. Such reactions can manifest either formation of tribofilm or induce enhanced wear at the tribological interface. The nature of these stress-induced reactions at the atomistic level and formation of byproducts at the tribological interface, however, remain poorly understood and pose uncertainties in predicting the tribological performance of the tribosystem. In this paper we demonstrate that, when pristine molybdenum disulfide layers in their two dimensional form are coupled with nanodiamonds, the catalytic interaction of sulfur with the nanodiamond through a stress-induced tribocatalytic reaction under high pressure and shear conditions induces amorphization of nanodiamond and eventually formation of onion like carbon structures (OLCs). This leads to near-zero friction, superlubricity, when sliding against diamond like carbon (DLC) ball in dry nitrogen environment at room temperature. Furthermore, the large size (20-30 nm in diameter) and stiffness of the resulting OLCS allow sustaining high contact pressures, while graphitic lattice provides an incommensurate contact with the DLC surface, thus allowing for successful demonstration of the superlubricity conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Use of Atomic Oxygen for Increased Water Contact Angles of Various Polymers for Biomedical Applications

In the low Earth orbit (LEO) space environment, spacecraft surfaces can be altered during atomic oxygen exposure through oxidation and erosion. There can be terrestrial benefits of such interactions, such as the modification of hydrophobic or hydrophilic properties of polymers due to chemical modification and texturing. Such modification of the surface may be useful for biomedical applications. For example, atomic oxygen texturing may increase the hydrophilicity of polymers, such as chlorotrifluoroethylene (Aclar), thus allowing increased adhesion and spreading of cells on textured Petri dishes. The purpose of this study was to determine the effect of atomic oxygen exposure on the hydrophilicity of nine different polymers. To determine whether hydrophilicity remains static after atomic oxygen exposure or changes with exposure, the contact angles between the polymer and a water droplet placed on the polymer s surface were measured. The polymers were exposed to atomic oxygen in a radio frequency (RF) plasma asher. Atomic oxygen plasma treatment was found to significantly alter the hydrophilicity of non-fluorinated polymers. Significant decreases in the water contact angle occurred with atomic oxygen exposure. Fluorinated polymers were found to be less sensitive to changes in hydrophilicity for equivalent atomic oxygen exposures, and two of the fluorinated polymers became more hydrophobic. The majority of change in water contact angle of the non-fluorinated polymers was found to occur with very low fluence exposures, indicating potential cell culturing benefit with short treatment time.

Beger, Lauren↗

Fabrication of Superhydrophobic Calcium Phosphate Coating on Mg-Zn-Ca alloy and Its Corrosion Resistance

A novel superhydrophobic calcium phosphate coating was prepared on a magnesium alloy substrate by a highly effective chemical conversion process and subsequent chemical modification. Different methods were employed to characterize the surface morphology and chemical composition as well as measure the wettability of the coating. It was demonstrated that the as-prepared superhydrophobic calcium phosphate coating has a typical three-level hierarchical structure consisted of micro-protrusions, submicro-lumps and nano-grains, conferring excellent superhydrophobicity with a water contact angle of 159°. The electrochemical measurements and appropriate equivalent circuit revealed that the corrosion-resistant performance of the superhydrophobic calcium phosphate coating was significantly improved as compared with that of the substrate, the corrosion potential of the superhydrophobic coating increases from −1.56 to −1.36 V, and its corrosion current density decreases from 1.29 × 10{sup −4} to 1.3 × 10{sup −6} A/cm{sup 2}. The anti-corrosion mechanism of the superhydrophobic coating was also discussed. It can be indicated that the corrosion inhibitive properties of the coating are in accordance with its hydrophobicity, which is owing to the presence of a protective layer of air trapped in the grooves of the coating surface to isolate the underlying materials from the external environment.

36 MATERIALS SCIENCE↗

Closeout of Advanced Boron and Metal Loaded High Porosity Carbons.

The Penn State effort explored the development of new high-surface-area materials for hydrogen storage, materials that could offer enhancement in the hydrogen binding energy through a direct chemical modification of the framework in high specific-surface-area platforms. The team chemically substituted boron into the hexagonal sp2 carbon framework, dispersed metal atoms bound to the boro-carbon structure, and generated the theory of novel nanoscale geometries that can enhance storage through chemical frustration, sheet curvature, electron deficiency, large local fields and mixed hybridization states. New boro-carbon materials were synthesized by high temperature plasma, pyrolysis of boron-carbon precursor molecules, and post-synthesis modification of carbons. Hydrogen uptake has been assessed, and several promising leads have been identified, with the requirement to simultaneously optimize total surface area while maintaining the enhanced hydrogen binding energies already demonstrated.

08 HYDROGEN↗