Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Carbide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effect of nanostructuring on the interaction of CO 2 with molybdenum carbide nanoparticles

Transition metal carbides are increasingly used as catalysts for the transformation of CO 2 into useful chemicals. Recently, the effect of nanostructuring of such carbides has started to gain relevance in tailoring their catalytic capabilities. Catalytic materials based on molybdenum carbide nanoparticles (MoC y ) have shown a remarkable ability to bind CO 2 at room temperature and to hydrogenate it into oxygenates or light alkanes. However, the involved chemistry is largely unknown. In the present work, a systematic computational study is presented aiming to elucidate the chemistry behind the bonding of CO 2 with a representative set of MoC y nanoparticles of increasing size, including stoichiometric and non-stoichiometric cases. Furthermore, the obtained results provide clear trends to tune the catalytic activity of these systems and to move towards more efficient CO 2 transformation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The effects of carbonaceous inclusions and their distributions on dynamic failure processes in boron carbide ceramics

Commercially available boron carbide ceramics typically have heterogeneous microstructures that contain distributions of processing-induced inclusions. The inclusions that are rich in carbon (i.e., carbonaceous) govern the underlying mechanisms of brittle fracture through wing crack formation, and thus dictate the mechanical response of the ceramic. In this study, we investigate the dynamic failure of five boron carbide ceramic materials with different inclusion populations. All of the materials were prepared by hot-pressing; four of these boron carbides contained different sizes and concentrations of carbonaceous inclusions, while one contained no carbonaceous inclusions. The heterogeneity distributions were characterized in some detail for statistical analysis using scanning electron microscopy and quantitative image analysis. A modified compression Kolsky bar setup with in situ ultra-high-speed microscopic imaging (10 million frames per second) was then used to study the influence of the inclusion distributions on the dynamic failure processes in these materials, at nominal high strain rates of 10 2 -10 3 s -1 . The in situ ultra-high-speed microscopy highlighted the link between micro and macroscale failure processes and demonstrated that the carbonaceous inclusions are indeed the preferential sites for nucleation of wing cracks, as previously hypothesized based on post-mortem observations. The relative orientation of an inclusion with respect to the compression axis was shown to affect the likelihood that it would participate in crack nucleation. In conclusion, all of the ceramics were also found to have orientation-dependent peak compressive stress, regardless of the presence of carbonaceous inclusions, suggesting that grain orientation distributions are also important.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Covalent surface modifications and superconductivity of two-dimensional metal carbide MXenes

Versatile chemical transformations of surface functional groups in two-dimensional transition-metal carbides (MXenes) open up a previously unexplored design space for this broad class of functional materials. We introduce a general strategy to install and remove surface groups by performing substitution and elimination reactions in molten inorganic salts. Successful synthesis of MXenes with oxygen, imido, sulfur, chlorine, selenium, bromine, and tellurium surface terminations, as well as bare MXenes (no surface termination), was demonstrated. These MXenes show distinctive structural and electronic properties. For example, the surface groups control interatomic distances in the MXene lattice, and Ti n +1 C n ( n = 1, 2) MXenes terminated with telluride (Te 2− ) ligands show a giant (>18%) in-plane lattice expansion compared with the unstrained titanium carbide lattice. The surface groups also control superconductivity of niobium carbide MXenes.

Kamysbayev, Vladislav↗
DOE OSTI2021

Optimized Microwave Digestion and Quantification Procedure for Boron Carbide samples

A microwave-assisted HNO3-H2SO4-HF digestion system was explored/optimized for the total dissolution of Boron Carbide samples followed by multi-elemental determination using ICP-MS and ICP OES, in order to improve the methods used in a previous try using a microwave-assisted H2O2-HNO3-HF digestion system. The samples were microwave digested to accomplish complete dissolution needed to perform quantitative analysis of their metal content. Two Boron Carbide samples were provided to us: JM10 and JM11. The Boron Carbide samples were completely dissolved at the end of the optimized microwave digestion procedure that was developed. The digested samples were analyzed for metals mostly by ICP MS; few elements were analyzed by ICP-OES. Microwave digestion reactions were performed in a Titan MPS instrument (Perkin Elmer, USA). Titan MPS instrument is equipped with Temperature and Pressure regulations and controlled by software. Each microwave digestion batch contained the samples of interest along with a reagent blank and one certified standard (1632e) in order to (i) compensate for the contaminations present in the reagents, (ii) ensure that the digestion was complete and (iii) that there was a good recovery of all the constituents. The certified standard used (1632e) was provided with USGS certificates of analysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Full Technical Report: High-Rate Carbide Growth by Evaporation

Boron carbide (B 4 C) is an attractive inertial confined fusion (ICF) ablator and a unique ultra-hard material with numerous current and potential applications. What makes B 4 C attractive as an ablator is its relatively high density and the ability to form a stable glassy phase combined with excellent chemical and mechanical stability. Despite these advantages, the fabrication of B 4 C ablators has remained a challenge. Magnetron sputtering, our current frontrunner approach for B 4 C deposition, exhibits low deposition rates (< 2 μm/h) and undesirable nodular defects within the film structure that are believed to generate from the dusty plasma around the sputtering source. The goals of this project were to (1) establish alternative plasma-free, electron beam evaporation (EBE) capabilities for the deposition of thin films that are needed in mission-critical programs and; (2) demonstrate the feasibility to deposit B 4 C films at high rates by EBE in a bottom-up geometry and characterize their stoichiometry. In this feasibility study, we initially developed the capability to convert a general-use vacuum chamber into an electron beam evaporator as needed, or on demand. Then, we successfully used this setup to deposit films made of boron carbide and various other materials. By adjusting the deposition parameters and the evaporation source material, we were able to demonstrate the feasibility of reaching deposition rates as high as 8 μm/h, which is about 4 times the maximum rates obtained through sputtering methods. We predict that these values can still be further improved by implementing enhanced thermal control measures for the target source and optimizing electron beam parameters (ie. current, sweeping and frequency) since ceramic materials with similar densities to B 4 C can exhibit deposition rates of about twice this value. We anticipate that the skills and capabilities developed throughout this project will prove relevant not only to the HED and ICF campaigns but also to numerous existing and prospective applications focused on the development of ultra-hard carbide coatings. The fresh set of tools here developed will also facilitate the preparation and research on future new target materials of interest beyond B 4 C.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Rare Earth Carbide (Nd-C and Ce-C) Synthesis and Characterization to Inform Phase Equilibrium in Advanced Nuclear Fuels

As advances are being made regarding the performance of nuclear fuels, uranium carbides, and composites, such as (U,Zr)C and UO2 + UCx, have recently gained significant interest for deployment in nuclear space propulsion and high temperature gas-cooled reactors, respectively. However, the phase equilibria of several fission products in carbide systems remain unknown and may impact the overall fuel performance, specifically for particle nuclear fuels that are designed for commercial nuclear energy. Furthermore, comprehensive thermodynamic data on Rare Earth (RE) carbides, such as the Nd-C and Ce-C binary systems, remain limited. Presented in this study are the synthesis methods and characterizations of several Nd-C and Ce-C compositions. The findings from this research provide insights on the stability of RE-C binaries that form in irradiated nuclear fuels and address a critical knowledge gap in the current state of thermodynamics for two key RE-C systems.

Cavazos, Steven J. (ORCID:0009000130329363)↗
DOE OSTI2021

Methods for producing metal carbide materials

Methods of producing silicon carbide, and other metal carbide materials. The method comprises reacting a carbon material (e.g., fibers, or nanoparticles, such as powder, platelet, foam, nanofiber, nanorod, nanotube, whisker, graphene (e.g., graphite), fullerene, or hydrocarbon) and a metal or metal oxide source material (e.g., in gaseous form) in a reaction chamber at an elevated temperature ranging up to approximately 2400° C. or more, depending on the particular metal or metal oxide, and the desired metal carbide being produced. A partial pressure of oxygen in the reaction chamber is maintained at less than approximately 1.01×102 Pascal, and overall pressure is maintained at approximately 1 atm.

Garnier, John E.↗
DOE OSTI2023

Metal carbides and methods of making the same

The present disclosure relates to a method for producing a metal carbide, where the method includes thermally treating a molecular precursor in an oxygen-free environment, such that the treating produces the metal carbide and the molecular precursor includes where M is the metal of the metal carbide, N* includes nitrogen or a nitrogen-containing functional group, and x is between zero and six, inclusively.

Baddour, Frederick G.↗
DOE OSTI2026

Achieving Phase Control of Polymorphic Tungsten Carbide Catalysts

The polymorphism of tungsten carbide (W x C) and the challenge of selectively synthesizing pure phases have impeded a precise understanding of catalytic structure−property relationships. This study establishes a framework for phase-selective synthesis of W x C through controlling carburization kinetics. By maintaining particle sizes below 10 nm, β-W 2 C is selectively synthesized using gaseous carbon precursors (CH 4 /H 2 ) via temperature-programmed carburization (TPC). Our findings reveal that W 2 C stabilization is predominantly dictated by particle size and carburization kinetics rather than support interactions, providing a tunable approach to synthesize tungsten carbide catalysts. We elucidate the mechanistic pathway of WO x carburization, demonstrating that CH 4 activation occurs at mild temperatures via lattice oxygen. Our reactor studies establish ex situ synthesized β- W 2 C as an active and stable catalyst for the reverse water-gas shift (RWGS) reaction. However, the need for passivation and reduction pretreatment leads to a complex surface structure with diminished intrinsic activity. In contrast, our in situ synthesis protocol for β-W 2 C eliminates the need for passivation and exhibits increased CO STY during RWGS, illustrating the intrinsically higher activity compared to metallic W, WC 1−x (0.5 < x < 1), and stoichiometric WC.

CO2 conversion↗
DOE OSTI2022

Molybdenum Carbide Electrocatalyst In Situ Embedded in Porous Nitrogen–Rich Carbon Nanotubes Promotes Rapid Kinetics in Sodium–Metal–Sulfur Batteries

This work is the first report of a molybdenum carbide-based electrocatalyst for sulfur-based sodium metal batteries (SMBs/NMBs). MoC/Mo 2 C is in-situ grown on nitrogen-doped carbon nanotubes in parallel with formation of extensive nanoporosity. Sulfur impregnation (50 wt% S) results in unique triphasic architecture termed MoC/Mo 2 C@PCNT-S. Quasi-solid-state phase transformation to Na 2 S is promoted in carbonate electrolyte, with in-situ time-resolved Raman, XPS and optical analysis demonstrating minimal soluble polysulfides. MoC/Mo 2 C@PCNT-S cathodes delivered among the most promising rate performance characteristics in literature, achieving 987 mAh g -1 at 1 Ag -1 , 818 mAh g -1 at 3 A g -1 , and 621 mAh g -1 at 5 A g -1 . The cells deliver superior cycling stability, retaining 650 mAh g -1 after 1000 cycles at 1.5 Ag -1 , corresponding to 0.028% capacity decay per cycle. High mass loading cathodes (64 wt% S, 12.7 mg cm -2 ) also show cycling stability, with anode degradation due to deep plating/stripping driving capacity decay. Density functional theory (DFT) demonstrates that formation energy of Na 2 S x (1 ≤ x ≤ 4) on surface of MoC/Mo 2 C is significantly lowered compared to analogous redox in liquid. Strong binding of Na 2 S x (1 ≤ x ≤ 4) on MoC/Mo 2 C surfaces results from charge transfer between the sulfur and Mo sites on carbides' surface.

25 ENERGY STORAGE↗
DOE OSTI2022

Zirconium Carbide Mediates Coke‐Resistant Methane Dry Reforming on Nickel‐Zirconium Catalysts

Abstract Graphitic deposits anti‐segregate into Ni 0 nanoparticles to provide restored CH 4 adsorption sites and near‐surface/dissolved C atoms, which migrate to the Ni 0 /ZrO 2 interface and induce local Zr x C y formation. The resulting oxygen‐deficient carbidic phase boundary sites assist in the kinetically enhanced CO 2 activation toward CO(g). This interface carbide mechanism allows for enhanced spillover of carbon to the ZrO 2 support, and represents an alternative catalyst regeneration pathway with respect to the reverse oxygen spillover on Ni‐CeZr x O y catalysts. It is therefore rather likely on supports with limited oxygen storage/exchange kinetics but significant carbothermal reducibility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Elucidating the Active Site and the Role of Alkali Metals in Selective Hydrodeoxygenation of Phenols over Iron-Carbide-based Catalyst

In this study, iron-carbide-based catalysts have been explored in the selective hydrodeoxygenation (HDO) of phenol, aiming at elucidating the role of active site and alkali metal. Complementary characterization such as X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and scanning transmission electron microscopy coupled with electron energy loss spectroscopy, together with catalytic evaluations revealed a rapid structural reconstruction of iron carbide (Fe 3 C) catalysts, leading to a stable defective graphene-covered metallic Fe active phase (G@Fe) under reaction conditions. Further studies using different alkali metals (i.e., Na, K, and Cs) revealed that alkali metals showed negligible effect on the phase transformation of Fe 3 C. However, the reconstructed G@Fe doped with alkali metals inhibited the tautomerization, a facile reaction pathway to saturation of the aromatic ring, leading to enhanced selectivity to arene. The extent of inhibition of tautomerization or selectivity to arene was closely related to the degree of electron donation of alkali metal to Fe.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effects of iron carbide crystal phases and dopants on the conversions of CO 2 into ethylene

The density functional theory method was used to investigate the conversions of CO 2 to ethylene formation on two common iron carbide surfaces: Fe 3 C(0 1 0) and Fe 5 C 2 (1 1 1). Based on the structure relaxation of reaction intermediates and the elementary reaction transition states. We deduced the most competitive reaction pathways for ethylene production. The main CO 2 -to-ethylene routes and the competition of side products, CO and CH 4 , are discussed. Our analyses showed that CO 2 conversion is surface structure sensitive, whereas CH 4 and C2+ hydrocarbon formations depend on the reactivity of native C atoms in the carbides. To modify the intrinsic catalyst performance, mixing dopants in Fe catalysts is an effective strategy. Furthermore, we demonstrate that doping Zn and Zr can alter the local electronic structure and enhance CO 2 adsorption on the catalyst surface.

CO2 hydrogenation↗
DOE OSTI2020

Densification and oxidation behavior of spark plasma sintered Hafnium Diboride-Hafnium Carbide composite

This study reports on the sintering and oxidation behaviors of Hafnium Diboride (HfB 2 ) and Hafnium Carbide (HfC) based ultra-high temperature ceramic (UHTC) composites. Pure Hafnium Diboride, Hafnium Carbide, and HfB 2 -50 vol% HfC composite were consolidated using spark plasma sintering (SPS) without the use of sintering aids. HfB 2 -HfC composite displayed a high sintered density of 98% as compared to 87% density of pure HfB 2 . The increased density of the HfB 2 -HfC composite is attributed to the bimodal powder distribution, which allowed for the smaller HfC particle to occupy the voids between the larger HfB 2 particles resulting in improved packing efficiency. Moreover, the higher planar surface energy, for the (111) and the (200) planes for HfC, contributed to the smaller HfC particle being a significant driving force in the sintering process. Oxidation studies of each material were carried out by exposing them to a high-speed plasma jet in a temperature exceeding 2700 °C. The results of these studies show an improved oxidation resistance of HfB 2 -HfC composite by 54% and 70% over pure HfC and HfB 2 , respectively. The enhanced oxidation behavior is attributed to B 2 O 3 filling in the porosity between the HfO 2 scale and protecting the underlying material. This study provides a new alternative to improve the sinterability of UHTC diborides by introducing another UHTC (i.e., HfC) to form a fully dense composite without sintering aid and superior oxidation resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Direct ink writing of boron carbide monoliths

Direct ink writing – an extrusion-based additive manufacturing process – followed by pressureless sintering was investigated to produce boron carbide monoliths. The effects of ceramic powder loading and Pluronic binder concentration on the rheology of boron carbide pastes were studied and linked to both processing behaviour and final outcome in terms of sintered density and hardness. The effects of printing parameters, in particular orifice diameter and printing speed, were also investigated. Reducing the size of the extrusion nozzle from 584 μm to 406 μm led to significantly better shape retention, lower surface roughness, as well as higher density and hardness. A 203 μm printing orifice was also trialled but was unsuccessful due to faster drying kinetics that occurred with smaller ceramic struts resulting in rapid warping and nozzle clogging. Carbon-black – 8 wt% relative to B 4 C – acted as an effective sintering aid to increase both density and hardness. After optimisation of feedstock and printing parameters, few-layer samples (3–5 layers) had a density as high as ~ 97 % TD and a hardness of ~ 30 GPa. On the other hand, 18-layer specimens had a sintered density of ~ 87 % TD, despite a fully dense microstructure, due to the formation of a 3D array of inter-strut pores. Nevertheless, several issues that arose during manufacturing and post-processing were detrimental to the density and structural integrity of printed specimens; these issues were identified, discussed, and suggestions for future work are provided in this report.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Synthesis of high-entropy carbides from multi-metal polymer precursors

Three compositions of high-entropy carbides, (TiHfVNbTa)C, (TiZrHfNbTa)C and (TiZrNbTaW)C were synthesized via a modified Pechini process, in which citric acid served as both a cation chelating agent and a carbon source. Through pyrolysis and spark plasma sintering, single phase high-entropy carbides were formed from the homogeneous precursors at a relatively low temperature of 1800 °C. The dispersion of cations in the polymer precursor facilitated shorter diffusion distances in polymer-derived materials, and thus compositional homogeneity was significantly improved relative to materials produced by a solid-state method, as quantified by a defined coefficient of variation applied to energy-dispersive X-ray spectroscopy. Finally, a finer microstructure in polymer-derived materials results in improved fracture toughness with a K IC value of 4.29 MPa·m 1/2 achieved for (TiHfVNbTa)C.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Density functional theory calculations of the mixing enthalpy of ternary uranium carbide compounds

The high melting point of uranium-zirconium carbides (U,Zr)C makes them an ideal fuel for nuclear thermal propulsion (NTP) reactors. Gaps remain in the current understanding of the U-Zr-C system due to the difficulty of conducting thermodynamic experiments at NTP operation conditions. Density functional theory calculations using the Hubbard U model (DFT+U) were performed using orbital matrix occupation (OMC) to obtain the mixing enthalpy for UC and ZrC for (U,Zr)C ternary compounds. Similarly, DFT+U calculations were also carried out for the (U,Nb)C and (U,Ta)C systems. In conclusion, the DFT results are envisioned to be used in thermodynamic assessments of the uranium carbide systems based on the CALPHAD approach to supplement the lack of experimental data for the mixing thermodynamics.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Achieving superior mechanical properties: Tailoring multicomponent microstructure in AISI 9254 spring steel through a two-stage Q&P process and nanoscale carbide integration

In the pursuit of lightweight, durable steel, we have successfully developed a multicomponent structure in AISI 9254 spring steel using a two-stage quenching and partitioning (Q&P) process. The primary objective of this process was to engineer an optimized microstructure consisting of nanobainite, martensite, and nano-carbides. Utilizing the insights gained from the results of advanced techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atom probe tomography (APT) performed on the as-received AISI 9254 spring steel, we refined the quenching and partitioning (Q&P) path, leading to the successful establishment of a bainitic transformation for superior mechanical properties. Our tensile tests revealed a high yield strength (≈ 1600 ± 25 MPa) and ultimate tensile strength (≈ 1850 ± 50 MPa), along with considerable elongation (≈ 11.15 ± 0.25%). We also identified that pre-formed martensite lath defects and high silicon content play crucial roles during the Q&P process, preventing carbide coalescence and increasing strain-hardening capacity. Finally, this study demonstrates the potential of a Q&P process to generate high-strength, ductile steel for automotive and aerospace applications.

36 MATERIALS SCIENCE↗