Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CYCLOTRON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

Influence of injection beam emittance on beam transmission efficiency in a cyclotron

The JAEA AVF cyclotron accelerates various kinds of high-energy ion beams for research in biotechnology and materials science. Beam intensities of an ion species of the order of 10{sup −9}–10{sup −6} ampere are often required for various experiments performed sequentially over a day. To provide ion beams with sufficient intensity and stability, an operator has to retune an ion source in a short time. However, the beam intensity downstream of the cyclotron rarely increases in proportion to the intensity at the ion source. To understand the cause of this beam behavior, transmission efficiencies of a {sup 12}C{sup 5+} beam from an electron cyclotron resonance ion source to the cyclotron were measured for various conditions of the ion source. Moreover, a feasible region for acceleration in the emittance of the injection beam was clarified using a transverse-acceptance measuring system. We confirmed that the beam emittance and profile were changed depending on the condition of the ion source and that matching between the beam emittance and the acceptance of the cyclotron was degraded. However, after fine-tuning to improve the matching, beam intensity downstream of the cyclotron increased.

43 PARTICLE ACCELERATORS↗

Ion source and injection line for high intensity medical cyclotron

A 14 MeV high intensity compact cyclotron, CYCIAE-14, was built at China Institute of Atomic Energy (CIAE). An injection system based on the external H− ion source was used on CYCIAE-14 so as to provide high intensity beam, while most positron emission tomography cyclotrons adopt internal ion source. A beam intensity of 100 μA/14 MeV was extracted from the cyclotron with a small multi-cusp H− ion source (CIAE-CH-I type) and a short injection line, which the H− ion source of 3 mA/25 keV H− beam with emittance of 0.3π mm mrad and the injection line of with only 1.2 m from the extraction of ion source to the medial plane of the cyclotron. To increase the extracted beam intensity of the cyclotron, a new ion source (CIAE-CH-II type) of 9.1 mA was used, with maximum of 500 μA was achieved from the cyclotron. The design and test results of the ion source and injection line optimized for high intensity acceleration will be given in this paper.

43 PARTICLE ACCELERATORS↗

Coupling of electrostatic ion cyclotron and ion acoustic waves in the solar wind

The coupling of electrostatic ion cyclotron and ion acoustic waves is examined in three component magnetized plasma consisting of electrons, protons, and alpha particles. In the theoretical model relevant to solar wind plasma, electrons are assumed to be superthermal with kappa distribution and protons as well as alpha particles follow the fluid dynamical equations. A general linear dispersion relation is derived for such a plasma system which is analyzed both analytically and numerically. For parallel propagation, electrostatic ion cyclotron (proton and helium cyclotron) and ion acoustic (slow and fast) modes are decoupled. For oblique propagation, coupling between the cyclotron and acoustic modes occurs. Furthermore, when the angle of propagation is increased, the separation between acoustic and cyclotron modes increases which is an indication of weaker coupling at large angle of propagation. For perpendicular propagation, only cyclotron modes are observed. The effect of various parameters such as number density and temperature of alpha particles and superthermality on dispersion characteristics is examined in details. The coupling between various modes occurs for small values of wavenumber.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SUPERPOSITION OF CYCLOTRON LINES IN ACCRETING X-RAY PULSARS. I. LONG SPIN PERIOD

I model cyclotron lines by calculating a superposition of a large number of cyclotron line spectra emerging from different heights of a line-forming region of a non-uniform density and temperature of an electron-proton plasma threaded by a dipole magnetic field. In this paper, I mainly discuss the properties of the cyclotron lines in accreting X-ray pulsars with long spin periods ({approx}100-800 s). My simplified model succeeds in reproducing asymmetric line profiles, anharmonic ratios of line energy, relationship between the width and the depth of the line, and correlation between cyclotron line energy and X-ray intensity in the main pulse. In addition, I demonstrate that a shallower and broader fundamental (= first harmonic) line and a deeper second harmonic line as observed in accreting X-ray pulsars such as Vela X-1 and A0535+26 can be produced via a superposition of a large number of cyclotron lines formed at numerous different heights in a line-forming region with a dipole magnetic field. In this case, the ratio of the peak energy of the second harmonic absorption line to the fundamental can be larger than harmonic ratio 2. Furthermore, the width of the fundamental line is comparable to or larger than that of the second harmonic. These characteristics of the cyclotron lines are consistent with those observed in Vela X-1 and A0535+26.

79 ASTRONOMY AND ASTROPHYSICS↗

THE Be/X-RAY BINARY SWIFT J1626.6-5156 AS A VARIABLE CYCLOTRON LINE SOURCE

Swift J1626.6-5156 is a Be/X-ray binary that was in outburst from 2005 December until 2008 November. We have examined Rossi X-ray Timing Explorer/Proportional Counter Array (PCA) and High Energy X-ray Timing Explorer spectra of three long observations of this source taken early in its outburst, when the PCA 2-20 keV count rate was >70 counts s{sup -1} PCU{sup -1}, as well as several combined observations from different stages of the outburst. The spectra are best fit with an absorbed cutoff power law with a {approx}6.4 keV iron emission line and a Gaussian optical depth absorption line at {approx}10 keV. We present strong evidence that this absorption-like feature is a cyclotron resonance scattering feature, making Swift J1626.6-5156 a new candidate cyclotron line source. The redshifted energy of {approx}10 keV implies a magnetic field strength of {approx}8.6(1 + z) Multiplication-Sign 10{sup 11} G in the region of the accretion column close to the magnetic poles where the cyclotron line is produced. Analysis of phase-averaged spectra spanning the duration of the outburst suggests a possible positive correlation between the fundamental cyclotron energy and source luminosity. Phase-resolved spectroscopy from a long observation reveals a variable cyclotron line energy, with phase dependence similar to a variety of other pulsars, as well as the first harmonic of the fundamental cyclotron line.

79 ASTRONOMY AND ASTROPHYSICS↗

Variations of cyclotron line energy with luminosity in accreting X-ray pulsars

I develop a new model for changes of cyclotron line energy with luminosity based on changes in polar cap dimensions and the direction of photon propagation as well as a shock height. In X0115+63 and V0332+53, the fundamental cyclotron line energy has been observed to decrease with increasing luminosity. This phenomenon has been interpreted as a change of a shock height with luminosity. However, the rates of the observed changes are quite different, in which the line energy in V0332+53 varies slowly with luminosity compared with that in X0115+63. I demonstrate that a new model successfully reproduces the changes of the fundamental cyclotron line energies with luminosity in both X0115+63 and V0332+53. On the other hand, the cyclotron line energies in Her X–1, GX301–2, and GX304–1 were reported to increase with increasing luminosity. I discuss the positive correlation between the cyclotron line energy and luminosity based on changes in a beam pattern for Her X–1, GX301–2, and GX304–1. In addition, I discuss how a switch of the predominant, observed emission region from pole1 to pole2 influences cyclotron line energy for GX304–1 and A0535+26.

79 ASTRONOMY AND ASTROPHYSICS↗

SU-E-T-534: Level of Residual Radioactivity of Activated Parts of a Decommissioned Cyclotron

Purpose: CTI cyclotron RDS-111 was used at the Hong Kong Sanatorium and Hospital (HKSH) to produce radiopharmaceuticals and radioactive tracers for diagnostic scans between 1999 and 2007. During the operation, some machine components became radioactive by activation. For the safety of staff, decommissioning took place in 2009, two years after the cyclotron had stopped operation. This study investigates the residual radioactivity and radionuclides found in different cyclotron components in 2014 in compliance with the local regulations in Hong Kong for transfer of radioactive waste. Methods: A representative sample of each part was counted using a high-purity germanium detector (manufacturer: ORTECT) for at least four hours. GammaVision, a multichannel analyzer software, was used to identify the radionuclides found in the cyclotron components, as well as the associated activities. A standard library and a Mariscotti peak search algorithm were used to identify the present radionuclides. Only radionuclides with half-life greater than 180 days were considered. Results: Among the components, the Havar target foil has the highest specific activity ((4.6±0.6)×10{sup 2} Bq/g), with Co-60 being the most prominent ((3.8±0.5)×10{sup 2} Bq/g). The total activity of the target foil, however, is still low due to its small mass of 0.04 g. Radioisotopes Mn-54 (46±6 Bq/g), Na-22 (6.8±0.8 Bq/g), Co-57 (7.3±0.9 Bq/g), and Fe-59 (6.0±0.9 Bq/g) have also been detected in the target foil. The target window holder and the vacuum window register a specific activity of 88.3±0.6 Bq/g and 48.6±0.1 Bq/g, respectively. Other components, such as the collimator, the target tube, the valve body and the beamline, are also found with trace amounts of radionuclides. Conclusion: Even seven years after the cyclotron had stopped operation, some components still exhibited residual radioactivity from activation exceeding the IAEA clearance levels. Special consideration for radiological protection may need to be taken in the disposal of the cyclotron parts.

07 ISOTOPE AND RADIATION SOURCES↗

Characterization and D and D of PET Cyclotron and Radioisotope Production Facility - 17536

The State University of New York at Buffalo is in the process of the decontamination and decommissioning (D and D) of a cyclotron and radioisotope production facility located in Parker Hall on the South Campus. Many unique characterization activities are needed for compliant waste packaging, transportation, and disposal. In addition to the cyclotron used for successful production of radioisotopes, the facility features hot cells and glove boxes used for the purification and conditioning of the final product. Many challenges exist for the decommissioning of the cyclotron and the radioisotope production facility. These challenges include the proper characterization and management of the cyclotron, its associated equipment, and the remaining facility. Slightly activated concrete constitutes the majority of the remaining radioactive materials to be disposed of during the decommissioning. Challenges for this project include; - Regulatory interface between the New York Department of Health (NYDOH) and the New York Department of Environmental Conservation (DEC) for license closure; - Characterization of the cyclotron, its support equipment and the activated vault areas; - The most cost effective disposal options and the Data Quality Objectives needed for the various disposal options. The paper primarily focuses on challenges for characterization of the cyclotron and the remaining radioisotope production facility at the University at Buffalo. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cyclotron frequency multiplication in Cherenkov backward-wave oscillators

In relativistic Cherenkov backward-wave oscillators, the output radiation is usually formed by a forward wave, which arises due to reflection of the operating backward wave from the input end of the operating waveguide. In this paper, we propose to use the resonant cyclotron absorption of this forward wave as a way to produce the secondary, stimulated cyclotron radiation at a multiplied frequency and a high cyclotron harmonic. Along with the 'simple' cyclotron resonance, the high-frequency wave can be emitted also in the regime of a combined resonance caused by nonresonant cyclotron interaction of electrons with the backward low-frequency wave. Existence of combined resonances helps provide the frequency synchronization, as well as to improve the electron-wave interaction at the multiplied frequency.

43 PARTICLE ACCELERATORS↗

Backward mode of the ion-cyclotron wave in a semi-bounded magnetized Lorentzian plasma

The backward modes of the surface ion-cyclotron wave are investigated in a semi-bounded magnetized Lorentzian plasma. The dispersion relation of the backward mode of the surface ion-cyclotron wave is obtained using the specular reflection boundary condition with the plasma dielectric function. The result shows that the nonthermal effect suppresses the wave frequency as well as the group velocity of the surface ion-cyclotron wave. It is also found that the nonthermal effect on the surface ion-cyclotron wave increases with an increase of the wave number. In addition, it is found that the propagation domain of the surface ion-cyclotron wave increases with an increase of the ratio of the electron plasma frequency to the electron gyrofrequency. It is also found that the nonthermal effect increases the propagation domain of the surface ion-cyclotron wave in a semi-bounded magnetized Lorentzian plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SYNCA: A Synthetic Cyclotron Antenna for the Project 8 Collaboration

Cyclotron Radiation Emission Spectroscopy (CRES) is a technique for measuring the kinetic energy of charged particles through a precision measurement of the frequency of the cyclotron radiation generated by the particle's motion in a magnetic field. The Project 8 collaboration is developing a next-generation neutrino mass measurement experiment based on CRES. One approach is to use a phased antenna array, which surrounds a volume of tritium gas, to detect and measure the cyclotron radiation of the resulting β-decay electrons. To validate the feasibility of this method, Project 8 has designed a test stand to benchmark the performance of an antenna array at reconstructing signals that mimic those of genuine CRES events. To generate synthetic CRES events, a novel probe antenna has been developed, which emits radiation with characteristics similar to the cyclotron radiation produced by charged particles in magnetic fields. This paper outlines the design, construction, and characterization of this Synthetic Cyclotron Antenna (SYNCA). Furthermore, we perform a series of measurements that use the SYNCA to test the position reconstruction capabilities of the digital beamforming reconstruction technique. Finally, we find that the SYNCA produces radiation with characteristics closely matching those expected for cyclotron radiation and reproduces experimentally the phenomenology of digital beamforming simulations of true CRES signals.

47 OTHER INSTRUMENTATION↗

Evolution of the cyclotron mass with doping in La 2–x Sr x CuO 4

The recent observation of cyclotron resonance in optimally doped La 2–x Sr x CuO 4 using time-domain THz spectroscopy in high magnetic field has given new possibilities for the study of cuprate superconductors. One can measure the cyclotron mass in the more disordered cuprates possessing short scattering times, therefore expanding the study to materials and dopings in which quantum oscillations have not been observed. In this paper we present the measurement of the carrier mass of the hole-doped cuprate La 2–x Sr x CuO 4 across a range of dopings spanning from the slightly underdoped (p=0.13) to highly overdoped (p=0.26), near the termination of the superconducting dome. These results reveal a systematic increase of m c with doping, up to values greater than 13 times the bare electron mass. This is in contrast with the masses extracted from the heat capacity, which show a peak near the pseudogap critical point p* and/or Lifshitz transition. The cyclotron frequency is linear in field up to 31 T for all dopings, giving no evidence for field-induced Fermi surface reconstructions. The cyclotron mass is found to be positive for all dopings, but with a magnitude systematically below the heat-capacity mass for under and optimally doped samples, while exceeding it for overdoped samples. Among other aspects, these results are surprising as photoemission reveals a Lifshitz transition in the middle of our doping range and the sign of the cyclotron mass determined from a finite-frequency resonance is, in conventional theories, a topological quantity only sensitive to whether or not the Fermi surface is closed around holes or electrons. We see no sign of a divergence of the mass near p* nor near the Lifshitz transition, showing that any singularity, if it exists, is not strong enough to affect the cyclotron mass.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simulations of ion cyclotron anisotropy instabilities in the terrestrial magnetosheath

Enhanced transverse magnetic fluctuations observed below the proton cyclotron frequency in the terrestrial magnetosheath have been identified as due to the proton cyclotron and helium cyclotron instabilities driven by the T-perpendicular greater than T-parallel condition of the sheath ions. One-dimensional hybrid computer simulations are used here to examine the nonlinear properties of these two growing modes at relatively weak fluctuation energies and for wave vectors parallel to the background magnetic field. Second-order theory predicts fluctuating magnetic field energies at saturation of the proton cyclotron anisotropy instability in semiquantitative agreement with the simulation results. Introduction of the helium component enhances the wave-particle exchange rate for proton anisotropy reduction by that instability, thereby reducing the saturation energy of that mode. The simulations demonstrate that wave-particle interactions by the proton cyclotron and helium cyclotron instabilities lead to the anticorrelation observed by Anderson and Fuselier (1993).

Gary, S. P.↗

Multi-Species Test of Ion Cyclotron Resonance Heating at High Altitudes

Observations of ion distributions and plasma waves obtained by the Dynamics Explorer 1 satellite in the high-altitude, nightside auroral zone are used to study ion energization for three ion species. A number of theoretical models have been proposed to account for the transverse heating of these ion populations. One of these, the ion cyclotron resonance heating (ICRH) mechanism, explains ion conic formation through ion cyclotron resonance with broadband electromagnetic wave turbulence in the vicinity of the characteristic ion cyclotron frequency. The cyclotron resonant heating of the ions by low- frequency electromagnetic waves is an important energy source for the transport of ions from the ionosphere to the magnetosphere. In this paper we test the applicability of the ICRH mechanism to three simultaneously heated and accelerated ion species by modelling the ion conic formation in terms of a resonant wave-particle interaction in which the ions extract energy from the portion of the broadband electromagnetic wave spectrum which includes the ion cyclotron frequency. Using a Monte Carlo technique we evaluate the ion heating produced by the electromagnetic turbulence at low frequencies and find that the wave amplitudes near the ion cyclotron frequencies are sufficient to explain the observed ion energies.

Persoon, A. M.↗

Multi-Species Test of Ion Cyclotron Resonance Heating at High Altitudes

Observations of ion distributions and plasma waves obtained by the Dynamics Explorer 1 satellite in the high-altitude, nightside auroral zone are used to study ion energization for three ion species. A number of theoretical models have been proposed to account for the transverse heating of these ion populations. One of these, the ion cyclotron resonance heating (ICRH) mechanism, explains ion conic formation through ion cyclotron resonance with broadband electromagnetic wave turbulence in the vicinity of the characteristic ion cyclotron frequency. The cyclotron resonant heating of the ions by low-frequency electromagnetic waves is an important energy source for the transport of ions from the ionosphere to the magnetosphere. In this paper we test the applicability of the ICRH mechanism to three simultaneously heated and accelerated ion species by modelling the ion conic formation in terms of a resonant wave-particle interaction in which the ions extract energy from the portion of the broadband electromagnetic wave spectrum which includes the ion cyclotron frequency. Using a Monte Carlo technique we evaluate the ion heating produced by the electromagnetic turbulence at low frequencies and find that the wave amplitudes near the ion cyclotron frequencies are sufficient to explain the observed ion energies.

Persoon, A. M.↗

Method and apparatus for ion cyclotron spectrometry

An ion cyclotron spectrometer may include a vacuum chamber that extends at least along a z-axis and means for producing a magnetic field within the vacuum chamber so that a magnetic field vector is generally parallel to the z-axis. The ion cyclotron spectrometer may also include means for producing a trapping electric field within the vacuum chamber that includes at least a first section that induces a first magnetron effect that increases a cyclotron frequency of an ion and at least a second section that induces a second magnetron effect that decreases the cyclotron frequency of an ion. The cyclotron frequency changes induced by the first and second magnetron effects substantially cancel one another so that an ion traversing the at least first and second sections will experience no net change in cyclotron frequency.

Dahl, David A↗

Renormalized theory of the ion cyclotron turbulence in magnetic field-aligned plasma shear flow

The analytical treatment of nonlinear evolution of the shear-flow-modified current driven ion cyclotron instability and shear-flow-driven ion cyclotron kinetic instabilities of magnetic field-aligned plasma shear flow is presented. Analysis is performed on the base of the nonlinear dispersion equation, which accounts for a new combined effect of plasma turbulence and shear flow. It consists of turbulent scattering of ions across the shear flow with their convection by shear flow and results in enhanced nonlinear broadening of ion cyclotron resonances. This effect is found to lead to the saturation of ion cyclotron instabilities as well as to the development of nonlinear shear flow driven ion cyclotron instability.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear theory of drift-cyclotron kinetics and the possible breakdown of gyro-kinetics

A nonlinear theory of drift-cyclotron kinetics (termed cyclo-kinetics here) is formulated to test the breakdown of the gyro-kinetic approximations. Six dimensional cyclo-kinetics can be regarded as an extension of five dimensional gyro-kinetics to include high-frequency cyclotron waves, which can interrupt the low-frequency gyro-averaging in the (sixth velocity grid) gyro-phase angle. Nonlinear cyclo-kinetics has no limit on the amplitude of the perturbations. Formally, there is no gyro-averaging when all cyclotron (gyro-phase angle) harmonics of the perturbed distribution function (delta-f) are retained. Retaining only the (low frequency) zeroth cyclotron harmonic in cyclo-kinetics recovers both linear and nonlinear gyro-kinetics. Simple recipes are given for converting continuum nonlinear delta-f gyro-kinetic transport simulation codes to cyclo-kinetics codes by retaining (at least some) higher cyclotron harmonics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗