Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONVERSION TABLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

U.S. Standard Atmosphere, 1976

Part 1 gives the basis for computation of the main tables of atmospheric properties, including values of physical constants, conversion factors, and definitions of derived properties, including values of physical constants, conversion factors, and definitions of derived properties. Part 2 describes the model and data used up to 85 km, in the first section; and the model and data used above 85 km in the second section. The theoretical basis of the high altitude model is given in an appendix. Part 3 contains information on minor constituents in the troposphere, stratosphere, and mesosphere. The main tables of atmospheric properties to 1000 km are given in Part 4. The international system of metric units is used.

Source record↗

Data-Informed Environmental Conversion: Updating MIL-HDBK-217 and -338 with 50+ years of field data

Using over five decades of field data on electric and non-electric parts, we revisit the environmental conversion methodology described in MIL-HDBKs -217 and -338. These Reliability Engineering Handbooks’ predicted values are compared to new tables, developed using observed data. This observed data approach is also used to develop environmental conversion factors for non-electric parts, which were out of scope of MIL-HDBK-217 and -338.

reliability↗

Next generation laser optics for a hybrid fusion-fission power plant

The successful completion of the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL), followed by a campaign to achieve ignition, creates the proper conditions to begin exploring what development work remains to construct a power plant based on Inertial Confinement Fusion (ICF) technology. Fundamentally, two distinct NIF laser properties must be overcome. The repetition rate must increase from a shot every four hours to several shots per second. Additionally, the efficiency of converting electricity to laser light must increase by 20x to roughly 10 percent. Solid state diode pumped lasers, commercially available for table top applications, have adequate repetition rates and power conversion efficiencies, however, they operate at a tiny fraction of the required energy for an ICF power plant so would need to be scaled in energy and aperture. This paper describes the optics and coatings that would be needed to support this type of laser architecture.

42 ENGINEERING↗

A modeling analysis program for the JPL Table Mountain Io sodium cloud data

The necessary personnel software base was established to accomplish the data processing requirements for this project. Conversion of software required in reformatting the raw Io sodium cloud data was completed and data processing activities were initiated. Slit spectra data acquired by the JPL Table Mountain Io sodium cloud observing program were reviewed and their scientific value assessed. The lifetime description for sodium atoms in the Io sodium cloud model was improved by incorporating the most recently available temperatures and densities for ions and electrons in the plasma torus.

Smyth, W. H.↗

Photon-dark photon conversions in extreme background electromagnetic fields

The mixing of photons with light pseudoscalars in the presence of external electromagnetic fields has been used extensively to search for axion-like-particles. A similar effect for dark photon propagating states is usually not considered due to the Landau-Yang theorem. We point out that mixing between photon and dark photon propagating states in background electromagnetic fields can indeed occur, in non-linear QED, through a four-photon vertex by integrating out the electron box diagram. Starting from the Schwinger Lagrangian, we derive the equations of motion for dark photons interacting with the Standard Model photon through gauge kinetic terms. We provide expressions for the perpendicular and parallel refractive indices in series expansions in the critical field strength, valid both in the strong and weak background field limits. We then consider mixing between the photon-dark photon propagating system in the presence of pure electric and magnetic background fields, and work out the probability of conversion when the background fields are homogeneous. We indicate outlines of the calculation in the inhomogeneous case, and finally express our results in the active-sterile basis, where we find that the mixing induced by background fields can lead to corrections to the tree-level mixing in the zero field limit that is usually considered to probe such systems. Our results may find applications for probing photon-dark photon conversions in the vicinity of neutron stars and in table-top petawatt laser experiments.

79 ASTRONOMY AND ASTROPHYSICS↗

Heavy Water Moderated, Molten Uranium Cooled Reactor MCNP Model

Two of the major challenges facing the nuclear industry are the large amounts of nuclear waste produced by the current light water reactors and the risk of nuclear proliferation. Most proposed solutions for the waste problem involve fast breeder reactors, but that doesn't help with the nuclear proliferation problem. It is generally understood that a uranium fueled (U-238 + U-235) thermal reactor cannot be a breeder because there aren't enough neutrons. That analysis does not include the effects of fast fission of U-238. This is not surprising because the percentage of fast fissions in existing thermal reactor designs is low, around 3% (in Candu reactors) or less. Table I shows the neutrons involved in 1,000 fissions in a thermal reactor for a conversion ratio of 1.000 when the fuel is mostly U-238 and the fissile content is low enough so that most fast fissions are of U-238. The top section of the table is for U-235 in U-238, the bottom section is for Pu-239 in U-238. The bottom line in each section shows the number of neutrons available for all other losses (escape from the reactor, absorption in non fuel components, and absorption in xenon, samarium, and other fission products). If the percentage of fast fissions of U-238 is 10 or 15 % a thermal breeder may be feasible. This is largely independent of the percentage of fissile content of the fuel. If the reactor starting fissile content is mostly U-235, as the U-235 is replaced with Pu-239 the number of available neutrons increases even if the conversion ratio is only 1.000. The percentage of fast fissions in a reactor is a question of reactor geometry, as the minimum dimension of the fuel elements increases the average distance a fast neutron travels in the fuel before exiting increases and with it the probability of fast fission of U-238.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Device Performance of Emerging Photovoltaic Materials (Version 2)

Following the 1st release of the "Emerging photovoltaic (PV) reports", the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer-reviewed articles in academic journals since August 2020. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open-circuit voltage, short-circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application and are put into perspective using, e.g., the detailed balance efficiency limit. The 2nd installment of the "Emerging PV reports" extends the scope toward tandem solar cells and presents the current state-of-the-art in tandem solar cell performance for various material combinations.

36 MATERIALS SCIENCE↗

Device Performance of Emerging Photovoltaic Materials (Version 3)

Abstract Following the 2nd release of the “Emerging PV reports,” the best achievements in the performance of emerging photovoltaic devices in diverse emerging photovoltaic research subjects are summarized, as reported in peer‐reviewed articles in academic journals since August 2021. Updated graphs, tables, and analyses are provided with several performance parameters, e.g., power conversion efficiency, open‐circuit voltage, short‐circuit current density, fill factor, light utilization efficiency, and stability test energy yield. These parameters are presented as a function of the photovoltaic bandgap energy and the average visible transmittance for each technology and application, and are put into perspective using, e.g., the detailed balance efficiency limit. The 3rd installment of the “Emerging PV reports” extends the scope toward triple junction solar cells.

14 SOLAR ENERGY↗

Uranium storage mechanisms in wet-dry redox cycled sediments

Biogeochemical redox processes that govern radionuclide mobility in sediments are highly sensitive to forcing by the water cycle. For example, episodic draining and intrusion of oxidants into reduced zones during dry seasons can create biogeochemical hot moments that change microbial activity, affect redox status of minerals, initiate changes in sediment gas and water transport, and stimulate release of organic carbon, iron, and sulfur. In the upper Colorado River Basin, water-saturation of organic-enriched sediments locally creates reducing conditions that accumulate U. Subsequently, fluctuating hydrological conditions introduce oxidants which may reach internal portions of these sediments and reverse their role to become secondary sources of U. Knowledge of the impact of hydrological variability on the alternating import and export of contaminants, including U, is required to predict contaminant mobility and short- and long-term impacts on water quality. In this study, we tracked U, Fe, and S oxidation state and speciation to characterize the variability in redox processes and related U solubility within a shallow fine-textured organic-enriched sediment at the legacy U ore processing site at Shiprock, NM. Previous studies have reported uranium speciation and behavior in permanently saturated fine-grained naturally reduced sediments. This is the first report of U behavior in fine-grained reduced sediments that are experience cyclic redox cycling due to seasonal fluctuations in moisture content. Our results support previous observations that reducing conditions are needed to accumulate U in sediments, but they dispute the expectation that U predominantly accumulates as U(IV); our data reveal that U may accumulate as U(VI) in equal proportion to U(IV). Surprisingly, high abundances of U(VI) confined in the reduced sediments suggests that redox cycling is needed to promote its accumulation. We propose a new process model, where redox oscillations driven by annual water table fluctuations, accompanied by strong evapotranspiration in low permeability sediments, promote conversion of U(IV) to relatively immobile U(VI), which suggests long-term U immobilization resistant to redox perturbations. This observation contradicts the common idea that U(IV) accumulated in reducing conditions is systematically solubilized and transported to groundwater during re-oxidation.

54 ENVIRONMENTAL SCIENCES↗

Transient desorption of water vapor - A potential source of error in upper atmosphere rocket experiments

Results of measurements of the outgassing rates of samples of materials and surface finishes used on the outer skins of rocket-borne experiment packages in simulated rocket ascents. The results showed outgassing rates for anodized aluminum in the second minute of flight which are two to three orders of magnitude higher than those given in typical tables of outgassing rates. The measured rates for aluminum with chromate conversion surface coatings were also abnormally high. These abnormally high initial rates fell quickly after about five to ten minutes to values comparable with those in the published literature. It is concluded that anodized and chromate conversion coatings on the aluminum outer surfaces of a sounding rocket experiment package will cause gross distortion of the true water vapor environment.

Kendall, B. R. F.↗

A Compilation of Global Bio-Optical in Situ Data for Ocean-Colour Satellite Applications

A compiled set of in situ data is important to evaluate the quality of ocean-colour satellite-data records. Here we describe the data compiled for the validation of the ocean-colour products from the ESA Ocean Colour Climate Change Initiative (OC-CCI). The data were acquired from several sources (MOBY, BOUSSOLE, AERONET-OC, SeaBASS, NOMAD, MERMAID, AMT, ICES, HOT, GePCO), span between 1997 and 2012, and have a global distribution. Observations of the following variables were compiled: spectral remote-sensing reflectances, concentrations of chlorophyll a, spectral inherent optical properties and spectral diffuse attenuation coefficients. The data were from multi-project archives acquired via the open internet services or from individual projects, acquired directly from data providers. Methodologies were implemented for homogenisation, quality control and merging of all data. No changes were made to the original data, other than averaging of observations that were close in time and space, elimination of some points after quality control and conversion to a standard format. The final result is a merged table designed for validation of satellite-derived ocean-colour products and available in text format. Metadata of each in situ measurement (original source, cruise or experiment, principal investigator) were preserved throughout the work and made available in the final table. Using all the data in a validation exercise increases the number of matchups and enhances the representativeness of different marine regimes. By making available the metadata, it is also possible to analyse each set of data separately. The compiled data are available at doi:10.1594PANGAEA.854832 (Valente et al., 2015).

Valente, Andre↗

A Compilation of Global Bio-Optical in Situ Data for Ocean-Colour Satellite Applications – Version Two

A global compilation of in situ data is useful to evaluate the quality of ocean-colour satellite data records. Here we describe the data compiled for the validation of the ocean-colour products from the ESA Ocean Colour Climate Change Initiative (OC-CCI). The data were acquired from several sources (including, inter alia, MOBY, BOUSSOLE, AERONETOC, SeaBASS, NOMAD, MERMAID, AMT, ICES, HOT, GeP&CO) and span the period from 1997 to 2018. Observations of the following variables were compiled: spectral remote-sensing reflectances, concentrations of chlorophyll-a, spectral inherent optical properties, spectral diffuse attenuation coefficients and total suspended matter. The data were from multi-project archives acquired via open internet services or from individual projects, acquired directly from data providers. Methodologies were implemented for homogenisation, quality control and merging of all data. No changes were made to the original data, other than averaging of observations that were close in time and space, elimination of some points after quality control and conversion to a standard format. The final result is a merged table designed for validation of satellite-derived ocean-colour products and available in text format. Metadata of each in situ measurement (original source, cruise or experiment, principal investigator) were propagated throughout the work and made available in the final table. By making the metadata available, provenance is better documented, and it is also possible to analyse each set of data separately. This paper also describes the changes that were made to the compilation in relation to the previous version (Valente et al., 2016). The compiled data are available at https://doi.org/10.1594/PANGAEA.898188.

Andre Valente↗

Ab Initio Computations and Active Thermochemical Tables Hand in Hand: Heats of Formation of Core Combustion Species

Here, the fidelity of combustion simulations is strongly dependent on the accuracy of the underlying thermochemical properties for the core combustion species that arise as intermediates and products in the chemical conversion of most fuels. High level theoretical evaluations are coupled with a wide-ranging implementation of the Active Thermochemical Tables (ATcT) approach to obtain well-validated high fidelity predictions for the 0 K heat of formation for a large set of core combustion species. In particular, high level ab initio electronic structure based predictions are obtained for a set of 348 C, N, O, and H containing species, which corresponds to essentially all core combustion species with 34 or fewer electrons. The theoretical analyses incorporate various high level corrections to base CCSD(T)/cc-pVnZ analyses (n = T or Q) using H 2 , CH 4 , H 2 O, and NH 3 as references. Corrections for the complete-basis-set limit, higher-order excitations, anharmonic zeropoint energy, core–valence, relativistic, and diagonal Born–Oppenheimer effects are ordered in decreasing importance. Independent ATcT values are presented for a subset of 150 species. The accuracy of the theoretical predictions is explored through (i) examination of the magnitude of the various corrections, (ii) comparisons with other high level calculations, and (iii) through comparison with the ATcT values. The estimated 2σ uncertainties of the three methods devised here, ANL0, ANL0-F12, and ANL1, are in the range of ±1.0–1.5 kJ/mol for single-reference and moderately multireference species, for which the calculated higher order excitations are 5 kJ/mol or less. In addition to providing valuable references for combustion simulations, the subsequent inclusion of the current theoretical results into the ATcT thermochemical network is expected to significantly improve the thermochemical knowledge base for less-well studied species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient bifurcation and tabulation of multi-dimensional combustion manifolds using deep mixture of experts: An a priori study

This work describes and validates an approach for autonomously bifurcating turbulent combustion man-ifolds to divide regression tasks amongst specialized artificial neural networks (ANNs). This approach relies on the mixture of experts (MoE) framework, where each neural network is trained to be specialized in a given portion of the input space. The assignment of different input regions to the experts is determined by a gating network, which is a neural network classifier. In some previous studies, it has been demonstrated that bifurcation of a complex combustion manifold and fitting different ANNs for each part leads to better fits or faster inference speeds. However, the manner of bifurcation in these studies was based on heuristic approaches or clustering techniques. In contrast, the proposed technique enables automatic bifurcation using non-linear planes in high-dimensional turbulent combustion manifolds that are often associated with complex behavior due to different dominating physics in various zones. Furthermore, the proposed concept is validated using 4-dimensional (4D) and 5D flamelet tables, showing that the errors obtained with a given network size, or conversely the network size required to achieve a given accuracy, is considerably reduced. The effect of the number of experts on inference speed is also investigated, showing that by increasing the number of experts from 1 to 8, the inference time can be approximately reduced by a factor of two. Moreover, it is shown that the MoE approach divides the input manifold in a physically intuitive manner, suggesting that the MoE framework can elucidate high-dimensional datasets in a physically meaningful way.

42 ENGINEERING↗

Plutonium 239 Equivalency Calculations

This document provides the basis for converting actual weapons grade plutonium mass to a plutonium equivalency (PuE) mass of Plutonium 239. The conversion can be accomplished by performing calculations utilizing either: (1) Isotopic conversions factors (CF{sub isotope}), or (2) 30-year-old weapons grade conversion factor (CF{sub 30 yr}) Both of these methods are provided in this document. Material mass and isotopic data are needed to calculate PuE using the isotopic conversion factors, which will provide the actual PuE value at the time of calculation. PuE is the summation of the isotopic masses times their associated isotopic conversion factors for plutonium 239. Isotopic conversion factors are calculated by a normalized equation, relative to Plutonium 239, of specific activity (SA) and cumulated dose inhalation affects based on 50-yr committed effective dose equivalent (CEDE). The isotopic conversion factors for converting weapons grade plutonium to PuE are provided in Table-1. The unit for specific activity (SA) is curies per gram (Ci/g) and the isotopic SA values come from reference [1]. The cumulated dose inhalation effect values in units of rem/Ci are based on 50-yr committed effective dose equivalent (CEDE). A person irradiated by gamma radiation outside the body will receive a dose only during the period of irradiation. However, following an intake by inhalation, some radionuclides persist in the body and irradiate the various tissues for many years. There are three groups CEDE data representing lengths of time of 0.5 (D), 50 (W) and 500 (Y) days, which are in reference [2]. The CEDE values in the (W) group demonstrates the highest dose equivalent value; therefore they are used for the calculation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Sandia Unstructured Triangle Tabular Interpolation Package v 0.1 beta

The software interpolates tabular data, such as for equations of state, provided on an unstructured triangular grid. In particular, interpolation occurs in a two dimensional space by looking up the triangle in which the desired evaluation point resides and then performing a linear interpolation over the n-tuples associated with the nodes of the chosen triangle. The interface to the interpolation routines allows for automated conversion of units from those tabulated to the desired output units. when multiple tables are included in a data file, new tables may be generated by on-the-fly mixing of the provided tables

Carpenter, JohnH.↗