SEARCH · Engineering Papers

Results for “CONDUCTION BAND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Origin of proton irradiation-induced deep acceptors in Al 0.70 Ga 0.30 N

Deep level defect introduction and carrier removal were characterized using steady-state photocapacitance (SSPC), deep level transient spectroscopy (DLTS) and lighted capacitance–voltage for proton irradiated n-type Al 0.70 Ga 0.30 N Schottky diodes grown by metal-organic vapor phase epitaxy on AlN-on-sapphire templates. SSPC observed deep levels in the as-grown diode with zero-phonon transition energies of 2.20, 2.65, 3.10, 3.40, and 4.65 eV relative to the conduction band minimum (E c ), and an additional deep level emerged at 1.20 eV with irradiation. Lighted capacitance–voltage measurements quantified the deep level concentration (N t ) of states detected by SSPC, and it was observed that N t increased with proton fluence only for the 1.2 and 4.65 eV levels. Carrier removal was much larger than the increase in N t of the 1.2 and 4.65 eV deep levels, suggesting that radiation-induced deep level compensators existed beyond what was detected with SSPC. DLTS detected additional, proton-induced deep acceptors at E c —0.55, 0.82, and 1.16 eV, the latter of which is likely the same 1.20 eV deep state observed by SSPC. The concentration of the E c —0.82 eV defect state was large enough to reconcile carrier removal with total deep level introduction. Comparing the E c —0.82 and 1.16 eV deep acceptor levels to previous experimental and theoretical reports suggests that their atomistic origins could be the nitrogen vacancy (V N ) and oxygen substituting on the nitrogen sub-lattice (O N ), respectively. This defect behavior contrasts starkly with GaN, where V N and O N are shallow donors, and demonstrates that the electronic properties of defects can evolve drastically within the AlGaN alloy system ranging from wide bandgap GaN to ultra-wide bandgap AlN.

Armstrong, Andrew Michael [Sandia National Laborat↗

DOE OSTI2025

Deep chalcogen donors and electron localization in aluminum nitride

Abstract We show with hybrid density functional theory calculations that chalcogen donors other than oxygen (i.e. S N , Se N , and Te N ) give rise to deep donor states in aluminum nitride. These donors trap a localized electron in their neutral charge state, leading to deep ( + / 0 ) donor levels that are 0.45 eV or more from the conduction-band edge. As such, this behavior is distinct from the DX behavior leads to deep (+/−) levels which affects other donors such as O N and Si Al . We highlight how these results hint at the formation of small electron polarons in AlN, which are found to be unstable in the bulk, but metastable when bound to donor dopants like Si Al and the chalocogens, with activation energies on the order of 0.2–0.3 eV. These results indicate that S, Se, and Te are not shallow donor dopants in aluminum nitride and identify origins of the experimentally observed ∼200–300 meV activation energies for dopant activation in donor-doped samples.

aluminum nitride↗

DOE OSTI2025

Optical properties of vacancies in aluminum oxide (𝛼−Al 2 ⁢O 3 ) from first principles

We employ first-principles calculations based on hybrid density functional theory to investigate the structural and optical properties of the oxygen vacancy (𝑉 O ) and aluminum vacancy (𝑉 Al ) in 𝛼−Al 2 ⁢O 3 , the most stable (corundum) phase of alumina. Our calculations facilitate the identification of experimental excitation and luminescence spectra with specific electronic transitions at the vacancy sites. The absorption line shape for excitation of an electron at 𝑉$^0_O$ to the conduction-band minimum (CBM) is in excellent agreement with the 6.1 eV band detected by optical absorption spectroscopy, and we find that the 5.9 eV absorption band is generated by an internal electron transition at 𝑉$^0_O$. We confirm that the slowly decaying 3.0 eV emission band of the 𝐹 center is due to a triplet-singlet transition at 𝑉$^0_O$. Our calculations also reveal that the 4.8 eV/5.4 eV absorption and 3.8 eV emission bands assigned to the 𝐹 + center are generated by internal transitions at 𝑉$^{+1}_O$. The line shape for the excitation of an electron from 𝑉$^{+1}_O$ to the CBM agrees well with an absorption band at 6.4 eV, while the recombination of an electron with 𝑉$^{+2}_O$ also produces luminescence around 3.8 eV, but with a considerably broader line shape. For Al vacancies, we confirm that the most prevalent configuration in 𝛼−Al 2 ⁢O 3 is a split-vacancy configuration 𝑉 Al,s , and we calculate migration barriers for different directions in the corundum crystal. We predict absorption and emission spectra for the excitation and recombination of an electron localized at 𝑉$^{−3}_{Al}$ and 𝑉$^{−3}_{Al,s}$ sites with the CBM. The line shapes of the two 𝑉 Al configurations overlap and are considerably broader than the spectra corresponding to 𝑉 O .

36 MATERIALS SCIENCE↗

DOE OSTI2025

Emission properties of a hybrid metallized diamond(001) photocathode

The spectral emission characteristics of a proof-of-concept hybrid metallized diamond(001) photocathode are presented. The quantum efficiency (QE) is shown to be determined by the photoinjection efficiency across the ohmic contact at the back metallized face, whereas the mean transverse energy (MTE) of the photoemitted electrons is consistent with an (optical)phonon-assisted and momentum-resonant Franck-Condon mechanism [Franck-Condon electron emission from polar semiconductor photocathodes, Phys. Rev. Appl. 23, 054065 (2025)] following electron drift transport to the untreated diamond(001) front emission face. Emission is observed from both the lower and upper conduction bands of diamond with positive and negative electron affinity, respectively. A potential route to the realization of a red-visible photocathode based on this concept with a sub-50 meV MTE and a QE greater than 0.1% is discussed.

Density of states↗

DOE OSTI2025

Intercalation induced quasi-freestanding layer in TiSe 2

Angle-resolved photoemission spectroscopy is employed to study the electronic structure of bulk TiSe 2 before and after doping with potassium impurities. A splitting in the conduction band into two branches is observed after room-temperature deposition. The splitting energy increases to approximately 130 meV when the sample is cooled to 40 K. One branch exhibits a nondispersive two-dimensional feature, while the other shows the characteristics of three-dimensional bulk band dispersion. Core-level spectroscopy suggests that the K impurities predominantly occupy the intercalated sites within the van der Waals gap. Furthermore, the results indicate the formation of a quasi-freestanding TiSe 2 layer. Additionally, doping completely suppresses the periodic lattice distortion in the surface region. These findings are further supported by density functional theory calculations, which compare the band structure of monolayer and bulk TiSe 2 with experimental data. Thus, the dimensional and intrinsic electronic properties of 1⁢𝑇−TiSe 2 can be controlled through the intercalation procedure used in this work.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Relationship between atomic and electronic structure in Ln-bearing oxides

Metastable states of matter are of great interest as they offer the promise of novel functionality. They are often a natural consequence of exposure to nonequilibrium environments. In oxides, metastability can take the form of new polymorphs, chemical disorder, and even amorphization. While significant attention has been given to the impact those changes have on the atomic properties of the material, the corresponding changes in the electronic structure have received less attention. Here, using density functional theory, we consider how the electronic structure varies with potential metastable structures in two classes of lanthanide-bearing oxides—pyrochlores and interlanthanide sesquioxides. We find that the changes depend strongly on both the crystal structure and crystal chemistry of the compound with, for example, disordering and amorphization either increasing or decreasing the bandgap depending on the chemistry. For the 𝐴 2 ⁢𝐵 2 ⁢O 7 pyrochlores, we find different dependencies of the bandgap on the 𝐴 = 𝐿⁢𝑛 cations as the 𝐵 cation is changed, which we relate to the nature of the density of states at the conduction band minimum for different 𝐵 chemistries. Our calculations are validated by electron energy loss spectroscopy measurements for two pyrochlore compounds in which amorphization does reduce the bandgap, consistent with our calculations on these two compounds. In conclusion, our results highlight the relationship between atomic and electronic structure and how radiation can be used to modify and potentially control the electronic properties of oxides.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Comprehensive model for evaluating voltage losses and performance improvements in thin-film photovoltaic devices

Progress of state-of-the-art and next-generation thin-film photovoltaic devices is often stymied by open-circuit voltage (𝑉 oc ) that is significantly lower than theoretical and practical limits. Yet, effectively diagnosing the primary sources of voltage loss remains challenging. Herein, a sequence of device-level characterization techniques and simulations are employed to identify and rank loss mechanisms. For the research-based Cd⁡(Se,Te) device under study, most of the loss was at the front semiconductor heterointerface due to a clifflike conduction-band offset that lowered the recombination activation energy. Additional losses due to band tails were quantified by photoluminescence analysis. The latter provided the absorption coefficient and activation energy reduction associated with band tails as inputs to device models. Simulations showed that alleviating front-interface issues would improve 𝑉 oc , but it would then be limited by bulk recombination. Further improvement of the bulk would then lead to back-contact limitations. Reducing band tails is beneficial in any circumstance. In conclusion, this analysis provides guidance for reaching toward the radiative 𝑉 oc limit.

14 SOLAR ENERGY↗

DOE OSTI2025

Polarization-resolved core exciton dynamics in LiF using attosecond transient absorption spectroscopy

The ability to control absorption by modifying the polarization of light presents an exciting opportunity to experimentally determine the orbital alignment of absorption features. Here, attosecond extreme ultraviolet (XUV) transient absorption spectroscopy is used to investigate the polarization dependence of core exciton dynamics in LiF thin films at the Li + K edge. XUV pulses excite electrons from the Li 1s core level into the conduction band, allowing for the formation of a p-orbital-like core exciton, aligned along the XUV light polarization axis. A sub-5 fs near-infrared (NIR) probe pulse then arrives at variable time delays, perturbing the XUV-excited states and allowing the coherence decay of the core exciton to be mapped. The coherence lifetimes are found to be ≈ 2.4 ± 0.4 fs, which is attributed to a phonon-mediated dephasing mechanism as in previous core exciton studies. The differential absorption features are also shown to be sensitive to the relative polarization of the XUV and NIR fields. The parallel NIR probe induces couplings between the initial XUV-excited p-like bright exciton and s-like dark excitons. When crossed pump and probe polarizations are used, the coupling between the bright and dark states is no longer dipole-allowed, and the transient absorption signal associated with the coupling is suppressed by approximately 90%. This interpretation is supported by simulations of a few-level model system, as well as analysis of the calculated band structure. Here, the results indicate that laser polarization can serve as a powerful experimental tool for exploring the orbital alignment of core excitonic states in solid-state materials.

Attosecond laser spectroscopy↗

DOE OSTI2024

Coexistence of Interacting Charge Density Waves in a Layered Semiconductor

Coexisting orders are key features of strongly correlated materials and underlie many intriguing phenomena from unconventional superconductivity to topological orders. Here, we report the coexistence of two interacting charge-density-wave (CDW) orders in EuTe 4 , a layered crystal that has drawn considerable attention owing to its anomalous thermal hysteresis and a semiconducting CDW state despite the absence of perfect FS nesting. By accessing unoccupied conduction bands with time- and angle-resolved photoemission measurements, we find that mono- and bi-layers of Te in the unit cell host different CDWs that are associated with distinct energy gaps. The two gaps display dichotomous evolutions following photoexcitation, where the larger bilayer CDW gap exhibits less renormalization and faster recovery. Surprisingly, the CDW in the Te monolayer displays an additional momentum-dependent gap renormalization that cannot be captured by density-functional theory calculations. This phenomenon is attributed to interlayer interactions between the two CDW orders, which account for the semiconducting nature of the equilibrium state. Finally, our findings not only offer microscopic insights into the correlated ground state of EuTe 4 but also provide a general non-equilibrium approach to understand coexisting, layer-dependent orders in a complex system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2024

Controlling Interfacial Charge Separation Energetics and Kinetics

The overall goal is to probe electron transfer kinetics of the Marcus inverted region at interfaces. This project specifically uses a dye‐semiconductor interface with a reversible electron transfer reagent in solution where the semiconductor conduction band and electron transfer reagent ideally have a potential energy difference firmly within the Marcus inverted region. The goals of this project are: (Goal 1) Identify dye design elements that give dyes with low energy ground‐state oxidation potentials while retaining desirable electron transfer kinetics at the semiconductor interface. (Goal 2) Identify dye designs with excited‐state oxidation potentials set to fixed energies through molecular design while the dye ground‐state oxidation potentials are varied to allow for the evaluation of varied electron transfer reagents/redox shuttles (RS) with different free energies for electron transfer. (Goal 3) Within the context of the functionality identified in goals 1 and 2, goal 3 seeks to design dyes with features maximizing charge carrier lifetimes by minimizing recombination losses at metal oxide interfaces with high voltage systems. (Goal 4) Probe electron transfer kinetics in a high voltage‐dye sensitized solar cell with both the oxidized dye and RS firmly within the Marcus inverted region with regard to the TiO2 CB. (Goal 5) Identify tailored sensitizer/redox shuttle pairs with desirable electron transfer kinetics in defined spectral regions capable of “banding off” incident solar irradiation to give high voltage multijunction systems capable of exceeding the Shockley‐Queisser limit and powering catalytic processes.

14 SOLAR ENERGY↗

DOE OSTI2026

Synthesis, Structure, and Properties of the Complex Zintl Phase Eu 9 Zn 4.5 As 9 : A Candidate Topological Insulator and Thermoelectric Material

Reported are the synthesis and detailed analysis of the crystal and electronic structure of the novel Zintl phase Eu 9 Zn 4.5 As 9 . This material was identified in the densely populated Eu–Zn–As compositional space. For structure determination and for property measurements, suitable single crystals of this compound were grown from either Sn- or Pb-flux. Single-crystal X-ray diffraction methods indicate that Eu 9 Zn 4.5 As 9 crystallizes in the orthorhombic crystal system with the space group Pnma (a = 12.1953(7) Å, b = 4.3730(2) Å, c = 42.674(2) Å) and is formally isostructural to Ca 9 Mn 4+x Sb 9 , the less common “9–4–9” type. The structure is heavily disordered, with multiple partially occupied sites, yet, according to the Zintl-Klemm formalism, a charge-balanced composition (Eu 2+ ) 9 (Zn 2+ ) 4.5 (As 3− ) 9 is attained. Electronic structure calculations for a model, disorder-free structure indicate no energy gap between the valence and the conduction bands and suggest (semi)metallic behavior. Preliminary susceptibility measurements confirm the expected divalent nature of Eu 2+ ([Xe] 4 f 7 ground state).

Zintl phases↗

DOE OSTI2024

High-current, high-voltage AlN Schottky barrier diodes

AlN Schottky barrier diodes with low ideality factor (<1.2), low differential ON-resistance (<0.6 mΩ cm 2 ), high current density (>5 kA cm −2 ), and high breakdown voltage (680 V) are reported. The device structure consisted of a two-layer, quasi-vertical design with a lightly doped AlN drift layer and a highly doped Al 0.75 Ga 0.25 N ohmic contact layer grown on AlN substrates. A combination of simulation, current–voltage measurements, and impedance spectroscopy analysis revealed that the AlN/AlGaN interface introduces a parasitic electron barrier due to the conduction band offset between the two materials. This barrier was found to limit the forward current in fabricated diodes. Further, we show that introducing a compositionally-graded layer between the AlN and the AlGaN reduces the interfacial barrier and increases the forward current density of fabricated diodes by a factor of 10 4 .

Quiñones, C. E. (ORCID:0000000192703747)↗

DOE OSTI2024

Studying single-electron traps in newly fabricated Skipper-CCDs for the Oscura experiment using the pocket-pumping technique

Understanding and characterizing very low-energy (⁠ ∼eV) background sources is a must in rare-event searches. Oscura, an experiment aiming to probe electron recoils from sub-GeV dark matter using a 10 kg skipper-CCD detector, has recently fabricated its first two batches of sensors. In this work, we present the characterization of defects/contaminants identified in the buried-channel region of these newly fabricated skipper-CCDs. These defects/contaminants produce deferred charge from trap emission in the images next to particle tracks, which can be spatially resolved due to the sub-electron resolution achieved with these sensors. Using the trap-pumping technique, we measured the energy and cross section associated with these traps in three Oscura prototype sensors from different fabrication batches which underwent different gettering methods during fabrication. Results suggest that the type of defects/contaminants is more closely linked to the fabrication batch rather than to the gettering method used. The exposure-dependent single-electron rate (SER) of one of these sensors was measured ∼100 m underground, yielding (1.8±0.3)×10−3e−/pix/day at 131 K. The impact of the identified traps on the measured exposure-dependent SER is evaluated via a Monte Carlo simulation. Results suggest that the exposure-dependent SER of Oscura prototype sensors would be lower in lower background environments as expected.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2024

Unusual Electrical Conductivity Enhancement in Stable n‐Type Carbon Nanotube Networks

Organic molecule-doped n-type single-walled carbon nanotube (SWCNT) networks are promising candidates for advanced energy applications, such as flexible thermoelectrics and photovoltaics. Yet charge transport in n-type SWCNTs is limited by two factors: i) charge localization impeding inter-tube transport caused by disordered mesostructure of randomly oriented SWCNTs and ii) reduction of charge carrier concentration driven by oxidation. Herein, studied the relationship between the mesostructure and thermoelectric properties of n-type SWCNTs obtained by surfactant-functionalization and polymer-dopant grafting. Surprisingly, the electrical conductivity of the polymer-doped SWCNTs keeps increasing with increasing polymer content, even after the saturation of carrier concentration, resulting in 12x higher conductivity on polymer-doping compared to surfactant-functionalization. While hopping transport typically dominates in disordered systems, it is shown that a bridging effect from the polymer causes unusual band-like conduction in polymer-doped SWCNTs. Additionally, since surfactants are essential to prevent oxidation and retain n-type over a long duration, shows that SWCNTs obtained through a dual-functionalization strategy using both polymer-dopant and surfactant, demonstrates a long-term stable high n-type thermoelectric power factor, when the surfactant amount is carefully controlled. Besides thermoelectrics, the findings are of general interest to developing stable and conductive n-type SWCNTs for various energy and electronic applications.

carbon nanotubes↗

DOE OSTI2026

Bandgap Engineering of Ga 2 O 3 by MOCVD Through Alloying with Indium

Ga 2 O 3 and In 2 O 3 are vital semiconductors with current and future electronic device applications. Here, we study the alloying of In 2 O 3 and Ga 2 O 3 (IGO) and the associated changes in structure, morphology, band gap, and electrical transport properties. Undoped films of IGO were deposited on sapphire substrates with varying indium (In) percentage from zero to 100% by metal-organic chemical vapor deposition (MOCVD). Some films were annealed in H 2 to induce electrical conductivity. The measurements showed the optical band gap decreased by adding In; this was confirmed by density functional (DFT) calculations, which revealed that the nature of the valence band maximum and conduction band minimum strongly relate to the chemistry and that the band gap drops by adding In. The as-grown films were highly resistive except for pure In 2 O 3 , which possesses p-type conductivity, likely arising from In vacancy-related acceptor states. N-type conductivity was induced in all films after H-anneal. DFT calculations revealed that the presence of In decreases the electron effective mass, which is consistent with the electrical transport measurements that showed higher electron mobility for higher In percentage. The work revealed the successful band gap engineering of IGO and the modification of its band structure while maintaining high-quality films by MOCVD.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Engineering 2D Square Lattice Hubbard Models in 90° Twisted GeX/SnX (X =S, Se) Moiré Superlattices

Because of the large-period superlattices emerging in moiré two-dimensional (2D) materials, electronic states in such systems exhibit low energy flat bands that can be used to simulate strongly correlated physics in a highly tunable setup. While many investigations have thus far focused on moiré flat bands and emergent correlated electron physics in triangular, honeycomb, and quasi-one-dimensional lattices, tunable moiré realizations of square lattices subject to strong correlations remain elusive. Here, in this work, we propose a feasible scheme to construct moiré square lattice systems by twisting two or more layers of 2D materials in a rectangular lattice by 90°. We demonstrate the concept with twisted GeX/SnX (X =S, Se) moiré superlattices and calculate their electronic structures from first principles. We show that the lowest conduction flat band in these systems can be described by a square lattice Hubbard model with parameters which can be controlled by varying the choice of host materials, number of layers, and external electric fields. In particular, twisted double bilayer GeSe realizes a square lattice Hubbard model with strong frustration due to the next-nearest-neighbor hopping that could host unconventional superconductivity, in close analogy to the Hubbard model for copper-oxygen planes of cuprate high-temperature superconductors. The presented scheme uses 90° twisted 2D materials with rectangular unit cells as a promising platform for realizing the physical phenomena of square lattice Hubbard models, establishing a new route for studying its rich phase diagram of magnetism, charge order, and unconventional superconductivity in a highly tunable setting.

2-dimensional systems↗

DOE OSTI2025

Spin Dynamics of SCRPs in ZnO Quantum Dot–Organic Molecule Conjugates Studied with Pulsed EPR

Photogenerated spin-correlated radical pairs (SCRPs) are emerging as promising new candidates for Quantum Information Science applications, where they act as electron spin qubit pairs (SQPs). Historically, these pairs have been mostly investigated in natural photosynthesis and in molecular organic donor–(linker)–acceptor systems. Recently, we have shown that these spin pairs can also be observed by time-resolved electron-paramagnetic resonance (EPR) spectroscopy in hybrid inorganic–organic conjugates. The current study builds on recent work (ACS Nano, 2025, 19, 12194–12207), in which we systematically prepared hybrid inorganic–organic molecule systems with tunable geometries that can host SCRPs/SQPs. Here, we demonstrate using pulsed EPR spectroscopy that we can generate, study, and manipulate the spins in these photogenerated SCRPs hosted on highly tailorable inorganic–organic hybrid systems. Microwave pulse-based spin manipulation is the first step toward developing quantum computing and quantum sensing applications with these promising spin-based qubit materials, which can be reversibly photogenerated in highly spin-polarized states at moderate temperatures. An attractive feature of this new class of hybrid materials is that the g-factor of the unpaired electron spin in the ZnO QD (as part of the SCRP/SQP) can be adjusted using the quantum size effect in these QDs, which allows for the selective addressability of each spin in the SCRP using microwave pulses. Additionally, we also observed a difference between the g-values of the unpaired electron in the ZnO QD in the transient SCRP state and stable photoreduced state. We hypothesize that the unpaired electron in the SCRP is delocalized as a band-like conduction electron, while in the stable photoreduced state, the electron is delocalized in a shallow electron trap state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Thermally Activated Circularly Polarized Photoluminescence in a 2D Hybrid Perovskite with Giant Spin Splitting

Circularly polarized light generation and detection are critical for future spin-based technologies that inter-convert circularly polarized photons and electron spins. However, detailed mechanisms in such spin-photon interfaces are often either poorly understood or operate at cryogenic temperatures since typically small energies separating spin-split electronic bands facilitate thermally driven spin depolarization. Recently, several 2D hybrid perovskites with polar achiral cations were theoretically demonstrated to exhibit conduction and valence band spin-splitting energies greatly exceeding room-temperature thermal energy, suggesting their utility as spin-photon interfaces with practical operating temperatures. Here, a strong "spin memory" effect is reported in such a polar achiral layered perovskite that enables large room-temperature circularly polarized emission anisotropy following excitation with circularly polarized light. The polarization anisotropy depends strongly on temperature (thermally activated), excitation energy, and crystal orientation with respect to the excitation source. Temperature-dependent photoconductance measurements reveal similar thermally activated carrier generation. These observations suggest a mechanism whereby giant in-plane splitting of single-particle levels protects spin-polarization of photogenerated electrons and holes before recombination. Although polarized light emission is explored in greater detail in chiral perovskites, these results reveal that even without chirality, large spin memory in polar achiral perovskites can enable spin-photon interfaces that operate at elevated temperatures.

14 SOLAR ENERGY↗