Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CO2 Transport”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Flexible FlueCO2

Carbon dioxide (CO2) emission reductions remain a significant challenge on the path to clean energy. There are increasing legislative, social, and environmental factors motivating CO2 emissions reduction from power plants with carbon capture and storage (CCS). CCS in natural gas combined cycle (NGCC) power plants is critical to achieve a net-zero carbon electricity grid. Enhanced 45Q tax credits provide new incentives, but currently available technologies are unable to profitably operate in grids with deep variable renewable penetration which require flexible NGCC operation. Luna Labs has developed the FlueCO2 membrane to enable a profitable NGCC-CCS process. The FlueCO2 membrane couples steam transport across the membrane to CO2 transport in the opposite direction, enabling high capture efficiencies and low energy costs even at low CO2 concentrations. The dual-phase membrane can operate in the range of typical flue gas temperatures and pressures and does not require temperature or pressure cycling. Luna Labs’ FlueCO2 technology enables flexible and profitable operation of NGCC plants with lower capital investment and impact on electricity prices. In this Phase 1 project, Luna Labs utilized experimental testing, modeling, process simulation, and standardized costing methodologies to evaluate the techno-economic value of a 650 MW greenfield NGCC plant with FlueCO2 (NGCC-FlueCO2). Key design requirements for operation were established and plant performance under load-leveling conditions was validated through computational fluid dynamics and process modeling. Luna Labs developed a dynamic modeling tool which modeled plant operational modes across a variety of tax structures and electricity pricing scenarios to project the overall Net Present Value (NPV) of the NGCC-FlueCO2. FlueCO2 minimizes the impact of CCS integration on plant operation by integrating directly into the NGCC heat recovery steam generator (HRSG). By tapping into the plant’s low-pressure (LP) steam, operators can divert LP steam to the greenfield NGCC and/or CCS process in response to dynamic markets. Since FlueCO2 will not significantly affect HRSG (or NGCC) operation, CCS only turns off during peak power demand (>$250/MWh). Under baseload conditions, FlueCO2 lowers the capital (37%), energy (36%) and carbon capture (<$40/tonne) costs and can increase the overall plant lifetime NPV by approximately ~$1B in comparison with NGCC solvent-based capture reference cases (NETL Case 31B). Luna Labs has shared its costing tools with several interested partners and customers, which follows a generalizable approach to costing analysis.

Kelly, Jesse↗
NASA NTRS2014

Sensitivity of CO2 Simulation in a GCM to the Convective Transport Algorithms

Convection plays an important role in the transport of heat, moisture and trace gases. In this study, we simulated CO2 concentrations with an atmospheric general circulation model (GCM). Three different convective transport algorithms were used. One is a modified Arakawa-Shubert scheme that was native to the GCM; two others used in two off-line chemical transport models (CTMs) were added to the GCM here for comparison purposes. Advanced CO2 surfaced fluxes were used for the simulations. The results were compared to a large quantity of CO2 observation data. We find that the simulation results are sensitive to the convective transport algorithms. Overall, the three simulations are quite realistic and similar to each other in the remote marine regions, but are significantly different in some land regions with strong fluxes such as Amazon and Siberia during the convection seasons. Large biases against CO2 measurements are found in these regions in the control run, which uses the original GCM. The simulation with the simple diffusive algorithm is better. The difference of the two simulations is related to the very different convective transport speed.

Convection↗
NASA NTRS2018

The Impact of Prior Biosphere Models in the Inversion of Global Terrestrial CO2 Fluxes by Assimilating OCO-2 Retrievals

Atmospheric mixing ratios of carbon dioxide (CO2) are largely controlled by anthropogenic emissions and biospheric fluxes. The processes controlling terrestrial biosphere-atmosphere carbon exchange are currently not fully understood, resulting in terrestrial biospheric models having significant differences in the quantification of biospheric CO2 fluxes. Atmospheric transport models assimilating measured (in situ or space-borne) CO2 concentrations to estimate "top-down" fluxes, generally use these biospheric CO2 fluxes as a priori information. Most of the flux inversion estimates result in substantially different spatio-temporal posteriori estimates of regional and global biospheric CO2 fluxes. The Orbiting Carbon Observatory 2 (OCO-2) satellite mission dedicated to accurately measure column CO2 (XCO2) allows for an improved understanding of global biospheric CO2 fluxes. OCO-2 provides much-needed CO2 observations in data-limited regions facilitating better global and regional estimates of "top-down" CO2 fluxes through inversion model simulations. The specific objectives of our research are to: 1) conduct GEOS-Chem 4D-Var assimilation of OCO-2 observations, using several state-of-the-science biospheric CO2 flux models as a priori information, to better constrain terrestrial CO2 fluxes, and 2) quantify the impact of different biospheric model prior fluxes on OCO-2-assimilated a posteriori CO2 flux estimates. Here we present our assessment of the importance of these a priori fluxes by conducting Observing System Simulation Experiments (OSSE) using simulated OCO-2 observations with known "true" fluxes.

Biosphere↗
NASA NTRS1985

Application of AVHRR vegetation index to study atmosphere-biosphere exchange of CO2: Results from a 3-D tracer transport model

The 'normalized difference vegetation indices' (NVI) derived from AVHRR radiances are combined with field data of soil respiration and a global map of net primary productivity to prescribe, for the globe, the seasonal exchange of CO2 between the atmosphere and the terrestrial biosphere. The monthly fluxes of CO2 thus obtained are used as inputs to a 3-D tracer transport model which uses winds generated by a 3-D atmospheric general circulation model to advect CO2 as an inert constituent. Analysis of the 3-D model results shows reasonable agreement between the simulated and observed annual cycles of atmospheric CO2 at the locations of the remote monitoring stations. The application is shown of atmospheric CO2 distributions to calibrate the NVI in terms of carbon fluxes. The approach suggests that the NVI may be used to provide quantitative information about long term and global scale variations of photosynthetic activity and of atmospheric CO2 concentrations provided that variations in the atmospheric circulation and in atmospheric composition are known.

Fung, Inez Y.↗
DOE OSTI2025

Pre-FEED Report on the Tampa Regional Intermodal Carbon Hub (T-RICH)

This report presents the findings of a year-long pre-FEED study into the feasibility of a CO 2 intermodal hub in Port Tampa Bay which would collect, store, and liquify captured CO 2 from major emitters across the State of Florida for marine transport out of the state. The proposed hub is called the Tampa Regional Intermodal Carbon Hub (T-RICH).

99 GENERAL AND MISCELLANEOUS↗
NASA NTRS1994

North African savanna fires and atmospheric carbon dioxide

The effect of north African savanna fires on atmospheric CO2 is investigated using a tracer transport model. The model uses winds from operational numerical weather prediction analyses and provides CO2 concentrations as a function of space and time. After a spin-up period of several years, biomass-burning sources are added, and model experiments are run for an additional year, utilizing various estimates of CO2 sources. The various model experiments show that biomass burning in the north African savannas significantly affects CO2 concentrations in South America. The effect is more pronounced during the period from January through March, when biomass burning in South America is almost nonexistent. During this period, atmospheric CO2 concentrations in parts of South America typically may increase by 0.5 to 0.75 ppm at 970 mbar, the average pressure of the lowest model layer. These figures are above the probable uncertainty level, as model runs with biomass-burning sources estimated from independent studies using distinct data sets and techniques indicate. From May through September, when severe biomass burning occurs in South America, the effect of north African savanna fires over South America has become generally small at 970 mbar, but north of the equator it may be of the same magnitude or larger than the effect of South American fires. The CO2 concentration increase in the extreme northern and southern portions of South America, however, is mostly due to southern African fires, whose effect may be 2-3 times larger than the effect of South American fires at 970 mbar. Even in the central part of the continent, where local biomass-burning emissions are maximum, southern African fires contribute to at least 15% of the CO2 concentration increase at 970 mbar. At higher levels in the atmosphere, less CO2 emitted by north African savanna fires reaches South America, and at 100 mbar no significant amount of CO2 is transported across the Atlantic Ocean. The vertical structure of the CO2 concentration increase due to biomass burning differs substantially, depending on whether sources are local or remote. A prominent maximum of CO2 concentration increase in the lower layers characterizes the effect of local sources, whereas a more homogeneous profile of CO2 concentration increase characterizes the effect of remote sources. The results demonstrate the strong remote effects of African biomoass burning which, owing to the general circulation of the atmosphere, are felt as far away as South America.

Iacobellis, Sam F.↗
DOE OSTI2024

Characterization of Pliocene and Miocene Formations in the Wilmington Graben, Offshore Los Angeles, for Large-Scale Geologic Storage of CO2

The project Characterization of Pliocene and Miocene Formations in the Wilmington Graben, Offshore Los Angeles, for Large-Scale Geologic Storage of CO2 is one of 9 site characterization projects that were implemented as part of ARRA (American Recovery and Reinvestment Act). Data from this project was used to improve resolution of data in NATCARB in the area of study. Data related to this study has already been incorporated in NATCARB Atlas. The Los Angeles Basin presents an opportunity for large-scale geologic CO2 storage. Due to its large population and historical and geologic setting as one of the most prolific oil and gas producing basins in the United States, the region is home to more than 12 major power plants and oil refineries that produce more than 5 million metric tons of fossil fuel-related CO2 emissions each year. GeoMechanics Technologies worked to characterize the Pliocene and Miocene sediments in the Wilmington Graben, offshore of Los Angeles, California, for high-volume CO2 storage. The Graben is located offshore of the Los Angeles and Long Beach Harbor area, making it accessible yet geologically isolated from the nearby Wilmington oilfield and onshore areas. These sediments span more than 5,000 feet of vertical interval with an estimated storage resource of more than 100 million metric tons of CO2. The project team analyzed and interpreted existing geologic data within the region, including detailed exploration well log data and 2-D and 3-D seismic data. New seismic lines were acquired to fill in current data gap areas and two new characterization wells were drilled and logged. This information was integrated with existing geologic interpretations for adjacent onshore areas to help characterize optimal areas for CO2 storage and seals to safely store CO2. Integrated 3-D geologic and geomechanical models for the Wilmington Graben were developed to simulate the fate and transport of injected CO2 in the subsurface and to assess risks. This project contributed to the understanding of injectivity, containment mechanisms, rate of dissolution and mineralization, and storage capacity of the Wilmington Graben and associated analogous basins. This effort also provided greater insight into the potential for offshore geologic formations to safely and permanently store CO2.

.las↗
DOE OSTI2024

FECM/NETL CO 2 Transport Cost Model (2024): Description and User’s Manual

This is the user's manual for the 2024 version of the FECM/NETL CO 2 Transport Cost Model (CO2_T_COM). CO2_T_COM is an Excel-based tool that estimates revenues and capital, operating, and financing costs for transporting liquid phase CO 2 by pipeline. It is assumed that the CO 2 delivered to the pipeline meets pipeline specifications for purity. Costs are estimated for a single point-to-point pipeline, which may have pumps along the pipeline to boost the pressure. The model can be accessed here: https://www.netl.doe.gov/energy-analysis/details?id=42e3c409-b88f-467f-bff0-fadb92a68676 .

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Characterization of CO2 Binding on Alkaline Metal Oxide Sorbents and DFMs for Combined Capture and Conversion

As the world endures environmental crises associated with climate change and the rise of atmospheric CO2 concentrations from anthropogenic CO2 emission, carbon capture and utilization (CCU) technologies are increasingly necessary. Reactive carbon capture (RCC) technologies, in which capture and conversion of CO2 occur in a single reactor, are more energetically and economically attractive by avoiding the need to purify, compress, and transport the captured CO2. To this end, the development of dual function materials (DFM) that enable CO2 capture and conversion to useful C1 products, namely (1) methane, (2) CO, and (3) methanol, are attractive near-term targets for commercial CCU processes for renewable fuels and chemicals. DFM are composed of sorbents and catalysts co-dispersed on the same high surface area carrier. The sorbent component allows for selective capture of CO2 from a gas stream and the catalyst component subsequently performs the in-situ conversion of the adsorbed CO2 upon introduction of a reactive gas (typically H2). The survey of DFM formulations reveals a variety of sorbent+catalyst combinations of interest. There is, however, a lack of depth in fundamental understanding of how the CO2 binds to these materials and how the subsequent reaction mechanisms are affected, which are critical features for the development of next-generation materials with improved performance. To this end, we will describe in this work the CO2 binding characteristics of established and/or new DFM and their sorbent-only counterparts. The surface CO2 binding mechanism and capture capacity will be probed using techniques such as in-situ DRIFTS, operando TGA, and CO2 chemisorption.

alkaline oxides↗
DOE OSTI2023

Investigating Combinations of Alkali Metal Oxides and Hydrogenation Catalysts for Reactive Capture of CO2 to Useful C1 Products

As the world endures environmental crises associated with climate change and the rise of atmospheric CO2 concentrations from anthropogenic CO2 emission, carbon capture and utilization (CCU) technologies are increasingly necessary. Reactive carbon capture (RCC) technologies, in which capture and conversion of CO2 occur in a single reactor, are more energetically and economically attractive by avoiding the need to purify, compress, and transport the captured CO2. To this end, dual function materials (DFMs) - composed of sorbents and catalysts co-dispersed on the same high surface area carrier - have been developed. The sorbent component allows for selective capture of CO2 from a gas stream and the catalyst component subsequently performs the in-situ conversion of the adsorbed CO2 upon introduction of a reactive gas (typically H2). The end product of the most established DFM, comprised of Ru and/or Ni with an alkaline sorbent, is methane via the CO2 methanation reaction. While renewable methane would be an excellent transition fuel, fossil methane is inexpensive (averaging $2.57/MMBTU in pre-pandemic 2019) and the economics of renewable methane utilization are noncompetitive. This requires the design and investigation of DFMs that enable CO2 capture and conversion to more valuable and more useful C1 products like CO or methanol (average price of methanol was $20.61/MMBTU in pre-pandemic 2019). These products can then be further upgraded to high energy density synthetic fuels, and related carbonaceous products, for more sustainable alternatives in industries that are difficult to decarbonize, specifically heavy duty vehicles and aviation. Herein, we report various sorbent + catalyst combinations to achieve the production of useful C1 products through reactive capture of CO2.

carbon capture↗
DOE OSTI2021

Relative Cost-Effectiveness of Electricity and Transportation Policies as a Means to Reduce CO2 Emissions in the United States: A Multi-Model Assessment

Two common energy policy instruments in the United States are tax incentives and technology standards. Although these instruments have been shown to be less cost-effective as a means to reduce CO2 emissions than direct emissions pricing mechanisms, it can be challenging to compare the CO2 emissions reduction costs of such policies across sectors, given the wide range in estimates for any given policy and inconsistencies in how such estimates are constructed across studies. This study addresses this analytical gap by simultaneously comparing the cost-effectiveness of policies across the electricity and transportation sectors using three publicly available US energy system models (EM-NEMS, ReEDS, and GCAM-USA). Four policies are explicitly compared: wind and solar tax credits, a renewable portfolio standard (RPS), a renewable fuel standard (RFS), and an electric vehicle (EV) tax credit. An economy-wide carbon tax is used as a benchmark for cost-effectiveness. Results from this study confirm prior insights about the cost-effectiveness of economy-wide carbon pricing relative to sectoral instruments but also reveal several novel insights about particular sectoral policies. Specifically, this study finds that (1) current electricity tax incentives provide uneven support for wind and solar technologies, (2) despite known inefficiencies, renewable energy policies in the electricity sector are less expensive than earlier estimates due to technology advancement and changes in market conditions, (3) within transportation, an expanded RFS with increasing advanced biofuel targets is more cost-effective than an EV tax credit extension under plausible assumptions, (4) EV incentives lead to a rebound in conventional vehicle fuel economy that further erodes cost-effectiveness, and (5) the change in policy costs over time is not known a priori, but the relative cost ordering among these policies does not depend on the timeframe of analysis. These results are largely robust to the underlying modeling framework, increasing the confidence with which they can be applied to climate policy evaluation.

economics↗
DOE OSTI2020

Microalgae Biomass Production for Utilization of CO2 and Mitigation of Greenhouse Gas Emissions

Microalgal cultivation processes for production of foods, feeds, fuels, fertilizers and other bioproducts and wastewater treatment are being considered for reducing CO2 and other greenhouse gas emissions. Major differences between microalgae and higher plant biomass cultivation are include their potential for much higher productivities, their higher content of major (N-P-K) and minor nutrients, and the challenge of harvesting such microscopic plants. Most critical, microalgal mass cultures, unlike higher plants, currently require fertilization with concentrated sources of CO2. As practically all of the C fixed into algal biomass will be re-emitted into the atmosphere in short order, algae processes do not sequester carbon. Their potential for CO2 emissions reductions must thus be based on comparisons with current technologies for the production of competing products, such as biofuels or animal feeds, or in wastewater treatment. Further, due to economic limitations to flue gas transport (3 to 12 % CO2), as well as highly variable diurnal and seasonal CO2 utilization and limited land and water availability near most CO2 sources, only a small fraction of waste CO2 emissions will be directly utilizeable for microalgae biomass production. However, for long-distance transport, flue gas CO2 capture by chemical processes would greatly increase the costs of flue gas utilization. More concentrated, sources of CO2 from refineries, fertilizer, chemical plants, and fermentations are available, but are also very limited relative to the quantities required for commodity production. Microalgae can also be cultivated on organic wastes, which provide both nutrients (N, P, K, etc.) and organic and inorganic carbon for algal growth, reducing greenhouse gas emissions compared to conventional treatment processes. To maximize the potential for algae biomass production and CO2 utilization, direct capture of CO2 from air will be required. This could be accomplished with the algal cultivation process itself in large open-raceway ponds, through chemical and biological enhancements of CO2 transfer into algal cutures. The relative productivities, economics, greenhouse gas balances, and resource potentials of these alternative CO2 sources for large-scale production of microalgae will be reviewed.

09 BIOMASS FUELS↗
DOE OSTI2024

Determination of the Diffusion Coefficients of Binary CH4 and C2H6 in a Supercritical CO2 Environment (500–2000 K and 100–1000 atm) by Molecular Dynamics Simulations

The self-diffusion coefficients of carbonaceous fuels in a supercritical CO2 environment provide transport information that can help us understand the Allam Cycle mechanism at a high pressure of 300 atm. The diffusion coefficients of pure CO2 and binary CO2/CH4 and CO2/C2H6 at high temperatures (500 K~2000 K) and high pressures (100 atm~1000 atm) are determined by molecular dynamics simulations in this study. Increasing the temperature leads to an increase in the diffusion coefficient, and increasing the pressure leads to a decrease in the diffusion coefficients for both methane and ethane. The diffusion coefficient of methane at 300 atm is approximately 0.012 cm2/s at 1000 K and 0.032 cm2/s at 1500 K. The diffusion coefficient of ethane at 300 atm is approximately 0.016 cm2/s at 1000 K and 0.045 cm2/s at 1500 K. The understanding of diffusion coefficients potentially leads to the reduction in fuel consumption and minimization of greenhouse gas emissions in the Allam Cycle.

Energy & Fuels↗
NASA NTRS2023

Using Orbiting Carbon Observatory-2 (OCO-2) column CO2 retrievals to rapidly detect and estimate biospheric surface carbon flux anomalies

The global carbon cycle is experiencing continued perturbations via increases in atmospheric carbon concentrations, which are partly reduced by terrestrial biosphere and ocean carbon uptake. Greenhouse gas satellites have been shown to be useful in retrieving atmospheric carbon concentrations and observing surface and atmospheric CO2 seasonal-to-interannual variations. However, limited attention has been placed on using satellite column CO2 retrievals to evaluate surface CO2 fluxes from the terrestrial biosphere without advanced inversion models at low latency. Such applications could be useful to monitor, in near real time, biosphere carbon fluxes during climatic anomalies like drought, heatwaves, and floods, before more complex terrestrial biosphere model outputs and/or advanced inversion modelling estimates become available. Here, we explore the ability of Orbiting Carbon Observatory-2 (OCO-2) column-averaged dry air CO2 (XCO2) retrievals to directly detect and estimate terrestrial biosphere CO2 flux anomalies using a simple mass-balance approach. An initial global analysis of surface–atmospheric CO2 coupling and transport conditions reveals that the western US, among a handful of other regions, is a feasible candidate for using XCO2 for detecting terrestrial biosphere CO2 flux anomalies. Using the CarbonTracker model reanalysis as a test bed, we first demonstrate that a well-established mass-balance approach can estimate monthly surface CO2 flux anomalies from XCO2 enhancements in the western United States. The method is optimal when the study domain is spatially extensive enough to account for atmospheric mixing and has favorable advection conditions with contributions primarily from one background region. We find that errors in individual soundings reduce the ability of OCO-2 XCO2 to estimate more frequent, smaller surface CO2 flux anomalies. However, we find that OCO-2 XCO2 can often detect and estimate large surface flux anomalies that leave an imprint on the atmospheric CO2 concentration anomalies beyond the retrieval error/uncertainty associated with the observations. OCO-2 can thus be useful for low-latency monitoring of the monthly timing and magnitude of extreme regional terrestrial biosphere carbon anomalies.

Andrew F. Feldman↗
NASA NTRS2012

CO2 Flux Estimation Errors Associated with Moist Atmospheric Processes

Vertical transport by moist sub-grid scale processes such as deep convection is a well-known source of uncertainty in CO2 source/sink inversion. However, a dynamical link between vertical transport, satellite based retrievals of column mole fractions of CO2, and source/sink inversion has not yet been established. By using the same offline transport model with meteorological fields from slightly different data assimilation systems, we examine sensitivity of frontal CO2 transport and retrieved fluxes to different parameterizations of sub-grid vertical transport. We find that frontal transport feeds off background vertical CO2 gradients, which are modulated by sub-grid vertical transport. The implication for source/sink estimation is two-fold. First, CO2 variations contained in moist poleward moving air masses are systematically different from variations in dry equatorward moving air. Moist poleward transport is hidden from orbital sensors on satellites, causing a sampling bias, which leads directly to small but systematic flux retrieval errors in northern mid-latitudes. Second, differences in the representation of moist sub-grid vertical transport in GEOS-4 and GEOS-5 meteorological fields cause differences in vertical gradients of CO2, which leads to systematic differences in moist poleward and dry equatorward CO2 transport and therefore the fraction of CO2 variations hidden in moist air from satellites. As a result, sampling biases are amplified and regional scale flux errors enhanced, most notably in Europe (0.43+/-0.35 PgC /yr). These results, cast from the perspective of moist frontal transport processes, support previous arguments that the vertical gradient of CO2 is a major source of uncertainty in source/sink inversion.

moist atmospheric processes↗
NASA NTRS2015

Regional and Global Atmospheric CO2 Measurements Using 1.57 Micron IM-CW Lidar

Atmospheric CO2 is a critical forcing for the Earth's climate, and knowledge of its distribution and variations influences predictions of the Earth's future climate. Accurate observations of atmospheric CO2 are also crucial to improving our understanding of CO2 sources, sinks and transports. To meet these science needs, NASA is developing technologies for the Active Sensing of CO2 Emissions over Nights, Days, and Seasons (ASCENDS) space mission, which is aimed at global CO2 observations. Meanwhile an airborne investigation of atmospheric CO2 distributions as part of the NASA Suborbital Atmospheric Carbon and Transport â€" America (ACT-America) mission will be conducted with lidar and in situ instrumentation over the central and eastern United States during all four seasons and under a wide range of meteorological conditions. In preparing for the ASCENDS mission, NASA Langley Research Center and Exelis Inc./Harris Corp. have jointly developed and demonstrated the capability of atmospheric CO2 column measurements with an intensity-modulated continuous-wave (IM-CW) lidar. Since 2005, a total of 14 flight campaigns have been conducted. A measurement precision of approx.0.3 ppmv for a 10-s average over desert and vegetated surfaces has been achieved, and the lidar CO2 measurements also agree well with in-situ observations. Significant atmospheric CO2 variations on various spatiotemporal scales have been observed during these campaigns. For example, around 10-ppm CO2 changes were found within free troposphere in a region of about 200A-300 sq km over Iowa during a summer 2014 flight. Results from recent flight campaigns are presented in this paper. The ability to achieve the science objectives of the ASCENDS mission with an IM-CW lidar is also discussed in this paper, along with the plans for the ACT-America aircraft investigation that begins in the winter of 2016.

Lin, Bing↗
DOE OSTI2026

Metallic Phase-Free Zn-Al Mixed Oxide Dual Function Materials Enable High Co Selectivity in Reactive Carbon Capture From Dilute Streams

Scaling conventional carbon capture and utilization methods can be limited by cost and permitting issues associated with transportation of captured CO2. Reactive carbon capture (RCC), in which a single solid-phase dual function material (DFM) is used to both capture CO2 from dilute streams (e.g., flue gas) and catalytically convert the bound species to products in a single unit operation, has the potential to reduce energy and capital costs by over 50% relative to separate capture and conversion. To incentivize adoption, high-value products such as methanol and CO should be targeted. Appealingly, CO can be produced at atmospheric pressure, thereby lowering overall H2 demand; however, high reaction temperatures (> 600 degrees C) and the use of oxidizable transition metals, such as Ni, are often necessary to drive the reverse water-gas shift (RWGS) during reactive desorption of the bound CO2. The sensitivity of these transition metals to oxygen undercuts their utility in point source RCC. To further derisk RCC, it is essential to develop metallic-phase free DFMs that are insensitive to residual oxygen in flue gas and can achieve selective reactive desorption to CO at moderate pressures (< 400 degrees C). To this end, we have developed K-modified Zn-Al mixed oxides (K/ZnAlOx) to convert captured CO2 to CO with > 97% selectivity and yields up to 53% of captured CO2 at 400 degrees C. Complementary in situ spectroscopy studies revealed the role of K-modification in improving RCC performance of unmodified ZnAlOx. The top performing DFM was also subjected to extended RCC cycling with oxygen co-fed with CO2 during the capture test to assess durability under simulated flue gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2001

Mapping Rice Production in China with AVHRR Imagery

The study of rice agriculture is necessary for both the importance of rice as a vital food source and because of the fact that cultivating it has an unfortunate byproduct, namely methane gas. As a food source, rice is a staple for a large majority of the world's population, especially in Asia. Because the populations of many Asian nations are increasing at rapid rates, the production of rice will need to similarly increase. In 1989, it was estimated that the demand for rice would increase by 65% by the year 2019. Rice crops are considered to be one of the primary anthropogenic sources of methane gas. A reason for concern is that this gas is a so-called "greenhouse" trace gas and given its increasing levels in the atmosphere, is thought to contribute to the suspected global warming phenomenon. Some estimate that methane may contribute up to 20% to the global warming effect. Trace gas emissions from anthropogenic sources is an issue that generates great worldwide interest because of the fact that mankind is very likely affecting the current and future climate in potentially negative ways. In an effort to better understand these effects, scientists and engineers are conducting research on all of the varied fronts which relate to climate change and biosphere/atmosphere interactions. The study of global warming through increasing concentrations of greenhouse gases is one area which has received much media and scientific attention. Research fueled by debates on this topic is being conducted on numerous, interrelated fronts in an effort to better understand the complex relationship between human activities and the earth's climate. The research ranges from attempting to verify if the observed data even supports the existence of an anthropogenically generated global-warming phenomenon, to identification of sources and sinks of the trace gases, to measuring the source strengths, to studies which focus on modeling the processes which generate the gases, and finally, to trying to project their impact on the global climatic system. Some of the more commonly known sources of greenhouse gases are related to industry and transportation. Carbon dioxide, CO2, from automobile emissions is one such example. Lesser known are sources from natural and cultivated vegetation, such as the methane, CH4, resulting from rice cropping. While the concentration of atmospheric methane is significantly less than that of carbon dioxide, CH4 has been estimated to have up to 32 times the insulating capability of carbon dioxide, making it an important gas to monitor. The remainder of this chapter will provide some additional background information on the effects of atmospheric methane, and the role that rice agriculture plays as a source in the methane budget. This will be followed by a brief description of efforts to model this source of atmospheric methane. Finally, this chapter will end with a statement of the hypotheses of this thesis, at which time a description of the information contained in the rest of this document will be provided.

Paliouras, Eleni J.↗